Profil

Datoussaïd Sélim

Université de Mons - UMONS > Faculté Polytechnique > Service de Génie civil et Mécanique des Structures

Main Referenced Co-authors
VAN PARYS, Laurent  (40)
Descamps, Thierry  (34)
Guerlement, Guy (25)
Conti, Calogero  (22)
VERLINDEN, Olivier  (22)
Main Referenced Keywords
Assemblages bois (1); Barcelona Model (1); computer-aided detection (1); control-profile (1); design (1);
Main Referenced Unit & Research Centers
URBAINE - Urbanisation Revitalisation Bâtiment Architecture Innovations Espaces (33)
BIOSYS - Biosys (3)
CRIM - Ingénierie des matériaux (2)
Main Referenced Disciplines
Mechanical engineering (63)
Physics (23)
Computer science (18)
Architecture (17)
Mathematics (13)

Publications (total 105)

The most downloaded
16 downloads
Conti, C., Datoussaïd, S., & Verlinden, O. (01 January 1999). Optimal design of multibody systems using genetic algorithms [Paper presentation]. Design Engineering Technical Conference, Las Vegas, United States - Nevada. https://hdl.handle.net/20.500.12907/9511

The most cited

28 citations (Scopus®)

Rahouti, A., Lovreglio, R., Gwynne, S., Jackson, P., Datoussaïd, S., & Hunt, A. (30 April 2020). Human behaviour during a healthcare facility evacuation drills: Investigation of pre-evacuation and travel phases. Safety Science, 129. doi:10.1016/j.ssci.2020.104754 https://hdl.handle.net/20.500.12907/19069

Datoussaïd, S., & Descamps, T. (In press). A sensitivity analysis of a hospital in case of fire: The impact of the percentage of people with reduced mobility and the staff to occupant's ratio [Paper presentation]. Fire and Evacuation Modelling Technical Conference, Malaga, Spain.

Rahouti, A., Lovreglio, R., Gwynne, S., Jackson, P., Datoussaïd, S., & Hunt, A. (30 April 2020). Human behaviour during a healthcare facility evacuation drills: Investigation of pre-evacuation and travel phases. Safety Science, 129. doi:10.1016/j.ssci.2020.104754
Peer Reviewed verified by ORBi

Rahouti, A., Ruggiero, L., Jackson, P., & Datoussaïd, S. (2018). Evacuation Data from a Hospital Outpatient Drill: The Case Study of North Shore Hospital [Paper presentation]. 9th Pedestrian and Evacuation Dynamics, Lund, Sweden.

Descamps, T., VanParys, L., Datoussaïd, S., & Laplume, D. (2018). Structural Engineering and Teaching by Doing: How Wood Contributes to the Implementation of New Pedagogical Approaches [Paper presentation]. World Conference on Timber Engineering WCTE 2018, Séoul, South Korea.

Rahouti, A., Datoussaïd, S., & Descamps, T. (04 January 2018). Safety assessment of a high-rise dormitory in case of fire. International Journal of Disaster Resilience in the Built Environment, 9 (1).
Peer reviewed

Rahouti, A., Datoussaïd, S., & VanParys, L. (2017). Sécurité incendie: un serious game comme outil pour entraîner le personnel d'un hôpital.

Rahouti, A., & Datoussaïd, S. (2017). Educating healthcare facilities personnel on fire safety skills using serious games.

Rahouti, A., Ruggiero, L., Charita, D., & Datoussaïd, S. (19 July 2017). Simulating Assisted Evacuation using Unity3D [Poster presentation]. Traffic & Granular Flow, Washington, United States - District of Columbia.

Datoussaïd, S., & Descamps, T. (07 March 2017). Simulating healthcare facilities evacuation [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.

Rahouti, A., & Datoussaïd, S. (07 March 2017). Simulating healthcare facilities evacuation [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.

Rahouti, A., Datoussaïd, S., & Ruggiero, L. (2016). A sensitivity analysis of a hospital evacuation in case of fire: The impact of the percentage of people with reduced mobility and the staff to occupant's ratio [Paper presentation]. 3rd Fire and Evacuation Modelling Technical Conference (FEMTC2016), Malaga, Spain.

Rahouti, A., Datoussaïd, S., & Descamps, T. (2016). Safety Assessment of multi-storey buildings in case of fire: Development of a decision tool based on scenario analysis to improve risk management [Paper presentation]. 41st IAHS World Congress on Houssing, Albufeira, Portugal.

Rahouti, A., & Datoussaïd, S. (2016). Prédiction du risque incendie en milieu hospitalier [Paper presentation]. La 8ème conférence francophone en Gestion et Ingénierie des Systèmes Hospitaliers GISEH16, Casablanca, Morocco.

Rahouti, A., & Datoussaïd, S. (18 May 2016). Safety Assessment of multi-storey buildings in case of fire [Poster presentation]. 9ème édition de la Matinée des Chercheurs 2016 (MdC2016), Valenciennes, France.

Avez, C., & Datoussaïd, S. (2015). Développement d'un parement de pierres bleues collées sur isolant rigide : Tests en traction perpendiculaire au joint.

VanParys, L., Descamps, T., & Datoussaïd, S. (2015). Material, structure, usage : contemporary civil engineering challenges in heritage conservation.

Datoussaïd, S., & Brohez, S. (2014). Simulation de la propagation des fumées et de l'évacuation dans un hôpital psychiatrique [Paper presentation]. Conférence Francophone Gestion et Ingénierie des Systèmes Hospitaliers, Liège, Belgium.

Farhat, D., Datoussaïd, S., VanParys, L., Guerlement, G., Carsten, E., & Ledoux, P. (2013). Novel and promising free form manufacturing technology contribute to the improvement of a trapezo-metacarpal joint implant [Paper presentation]. 18ème assises européennes du prototypage rapide, Paris, France.

Datoussaïd, S. (18 April 2013). Activités de recherche liées à la caractérisation des matériaux du service GCMS [Paper presentation]. Journée Thématique CRIM 'Usinage', Mons, Belgium.

VanParys, L., Noël, J., Lamblin, D., Datoussaïd, S., & Tilmant, A. (28 March 2013). Disorders in north transept of the cathedral in Tournai (Be): Structural monitoring, simulations and temporary stabilization. Journal of Heritage Conservation = Wiadomości Konserwatorskie, 32.
Peer reviewed

VanParys, L., Bultot, E., Kouroussis, G., & Datoussaïd, S. (26 March 2013). Stability assessment in structural masonries: micromodel based on contact laws [Paper presentation]. SIMULIA Academic Seminar 2013, Mons, Belgium.

Noël, J., Datoussaïd, S., Dagrain, F., & Huang, H. (12 March 2013). Finite element and granular approaches for the numerical modeling of rock cutting [Paper presentation]. Matinée des chercheurs (MDC 2013), Mons, Belgium.

VanParys, L., Noël, J., Lamblin, D., Datoussaïd, S., & Tilmant, A. (2012). Disorders in north transept of the cathedral in Tournai (BE): structural monitoring, simulations and temporary stabilization [Paper presentation]. 8th International Conference on Structural Analysis of Historical Constructions, Wroclaw, Poland.

VanParys, L., Noël, J., Datoussaïd, S., & Kouroussis, G. (06 October 2012). Predicting and quantifying the impact of activated ghost-rocks on unreinforced brick or block masonry walls [Paper presentation]. Ghost-rock karst symposium, 7-11 octobre, Han-sur-Lesse, Belgium.

VanParys, L., Descamps, T., Noël, J., Bultot, E., & Datoussaïd, S. (2012). Network analysis of Masonry: Indicator Computations for Detecting Soil Defect Impact [Paper presentation]. 11th International Conference on Computational Structures Technology, Dubrovnik, Croatia.

Datoussaïd, S., Noël, J., & Descamps, T. (15 July 2012). Multicriteria Optimal Design of Multibody Systems by Using Evolutionary Strategies [Paper presentation]. 8th European Solid Mechanics Conference, Graz, Austria.

Datoussaïd, S., Verlinden, O., & Bultot, E. (2012). Use of Genetic Algorithms for the Multicriteria Optimal Design of Multibody Systems [Paper presentation]. 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.

Bultot, E., VanParys, L., & Datoussaïd, S. (2012). Out-of-plane Behaviour of URM Walls: Experimental studies [Paper presentation]. 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.

Noël, J., Datoussaïd, S., & Dagrain, F. (09 May 2012). Potential interest of the Barcelona Model for predicting the efficiency of a tool set configuration in geo-material cutting [Paper presentation]. NCTAM, Royal Military School, Brussels, Belgium.

VanParys, L., Dubuisson, T., Descamps, T., & Datoussaïd, S. (2012). Detecting and quantifying the impact of soil defects in masonry systems: challenges and recourse to a Distributed Network Analysis method [Paper presentation]. 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.

Farhat, D., Datoussaïd, S., VanParys, L., & Guerlement, G. (2011). Improvement Of A Trapezo-Metcarpal Prosthesis By Using Electron Beam Melting [Paper presentation]. 17th International Symposium on Computational Biomechanics, Ulm, Germany.

Farhat, D., VanParys, L., Datoussaïd, S., & Guerlement, G. (2011). Improvement of a trapezo-metacarpal prosthesis by using electron beam melting [Paper presentation]. International society of biomechanics, Bruxelles, Belgium.

Descamps, T., VanParys, L., & Datoussaïd, S. (01 January 2011). Development of a Specific Finite Element for Timber Joint Modeling. International Journal for Computational Methods in Engineering Science and Mechanics, 12 (1), 1-13.
Peer Reviewed verified by ORBi

Datoussaïd, S., Verlinden, O., & Conti, C. (2010). Multicriteria Optimal Design of Multibody Systems by Using Genetic Algorithms [Paper presentation]. International Conference on Engineering Optimization ENGOPT, Lisbon, Portugal.

Noël, J., & Datoussaïd, S. (2010). Crack Office: a practical toolbox for engineering offices confronted to redundant masonry structures subjected to load redistributions [Paper presentation]. 8th international masonry Conference, Dresden, Germany.

Noël, J., & Datoussaïd, S. (2010). Crack pattern in heritage buildings: a practical toolbox [Paper presentation]. Third Euromediteranean Symposium on Advances in Geomaterials and Structures, Djerba, Tunisia.

Descamps, T., & Datoussaïd, S. (2009). 3D FEM modeling of slender laterally loaded timber fasteners [Paper presentation]. 12th International Conference on Fracture, Ottawa, Canada.

Datoussaïd, S., Brohez, S., Lalisse, D., & Capron, J.-L. (2009). Smoke propagation in buildings : a simulation toolbox [Paper presentation]. National Congress of Theoretical and Applied Mechanics, VUB, Brussels, Belgium.

Descamps, T., VanParys, L., & Datoussaïd, S. (2008). Finite semi-rigid study of light timber nailed structures [Paper presentation]. 10th World Conference on Timber Engineering, Miyasaki, Japan.

VanParys, L., Descamps, T., Datoussaïd, S., & Guerlement, G. (2008). Limit load analysis of voussoir arches in heritage buildings [Paper presentation]. 2nd Euro Mediterranean in Advances on Geomaterials and Structures, Hammamet, Tunisia.

Descamps, T., El Maskaoui, Z., Datoussaïd, S., & Guerlement, G. (2008). Industrial optimal design of steel frameworks with stochastic algorithm [Paper presentation]. 2nd Euro Mediterranean in Advances on Geomaterials and Structures, Hammamet, Tunisia.

Descamps, T., VanParys, L., & Datoussaïd, S. (2007). NDT of timber: Development of a test device based on the DCP principle [Paper presentation]. 15th International Symposium on NDT of Wood Duluth, MN - Minnesota, United States.

Descamps, T., Datoussaïd, S., & Guerlement, G. (2007). Urban damages due to the vibration propagation in the ground : a case of study [Paper presentation]. International Conference on Experimental Vibration Analysis for Civil Engineering Structures, Porto, Portugal.

VanParys, L., Descamps, T., & Datoussaïd, S. (2007). Stratégies évolutionnaires appliquées à l'analyse limite des arcs en maçonnerie [Paper presentation]. 18ème Congrès Français de Mécanique, Grenoble, France.

Datoussaïd, S., Descamps, T., & VanParys, L. (2007). Contribution à l'étude de plaques perforées en régime élasto-plastique [Paper presentation]. 18ème Congrès Français de Mécanique, Grenoble, France.

Descamps, T., Datoussaïd, S., & VanParys, L. (2007). Développement d'un élément fini semi-rigide pour l'étude des structures planes en bois [Paper presentation]. 18ème Congrès Français de Mécanique, Grenoble, France.

Descamps, T., Datoussaïd, S., & Guerlement, G. (2007). Prédiction de la réponse sismique de structures patrimoniales en bois [Paper presentation]. 8ème Congrès Marocain de Mécanique, El Jadida, Morocco.

VanParys, L., Fihri Fassi, H., & Datoussaïd, S. (2007). Calcul des arcs à l'état limite: approches traditionnelles et systèmes multicorps [Paper presentation]. 8ème Congrès Marocain de Mécanique, El Jadida, Morocco.

VanParys, L., Fihri Fassi, H., & Datoussaïd, S. (06 April 2007). Arcs en maçonnerie à l'état limite : approches traditionnelles et systèmes multicorps [Poster presentation]. Matinée des chercheurs (MDC'2007), Mons, Belgium.

Datoussaïd, S., & Guerlement, G. (01 November 2006). Wooden structures under seismic effects. Short presentation of the study in Mons [Paper presentation]. Cost C26 Action, Delft, Netherlands.

VanParys, L., Lamblin, D., & Datoussaïd, S. (2006). Limit analysis of masonry arches compared with numerical and experimental approaches [Paper presentation]. 7th International Masonry Conference 2006, One Great George Street, London, United Kingdom.

Lamblin, D., Guerlement, G., VanParys, L., & Datoussaïd, S. (01 September 2006). Study and improvement of a trapezium -metacarpal prosthesis in relationship with the bone remodeling phenomena. Computer Assisted Mechanics and Engineering Sciences, 13, 583-592.
Peer Reviewed verified by ORBi

Datoussaïd, S., Descamps, T., & Guerlement, G. (01 September 2006). Applications of evolutionary strategies to optimal design of mechanical systems. Foundations of Civil and Environmental Engineering, 7, 35-51.

Laplume, D., Datoussaïd, S., & Guerlement, G. (10 March 2006). Minimum-weight design of solid annumar plates under an assigned limit ring load. Structural and Multidisciplinary Optimization, 31, 480-487.

Datoussaïd, S., & Laplume, D. (2006). Optimal reinforcement of concrete beams with a genetic algorithm [Paper presentation]. 7th National Congress on Theoretical and Applied Mechanics, Mons, Belgium.

Descamps, T., Datoussaïd, S., & VanParys, L. (2006). Discrete minimum weight design of timber frames according to Eurocode 5 [Paper presentation]. 7th National Congress on Theoretical and Applied Mechanics, Mons, Belgium.

Datoussaïd, S., & Guerlement, G. (2006). Evaluation of the semi-rigidity of pipe supports and its influence on safety [Paper presentation]. 1st Euro Mediterranean in Advances on Geomaterials and Structures, Hammamet, Tunisia.

Datoussaïd, S., & Guerlement, G. (01 January 2006). Wooden structures under seismic effects [Paper presentation]. Workshop of the COST C26 Urban Habitat Constructions under catasstrophic Events, .

Datoussaïd, S., VanParys, L., & De Smet, D. (2006). Fall protection: a proposed design method [Paper presentation]. 7th National Congress on Theoretical and Applied Mechanics, Mons, Belgium.

Datoussaïd, S., VanParys, L., Lamblin, D., & Descamps, T. (01 January 2006). Structural behaviour of the flying-buttresses of the O-L Cathedral of Tournai. Australian Journal of Structural Engineering, 6 (3), 191-198.
Peer Reviewed verified by ORBi

Datoussaïd, S., & Laplume, D. (2006). Obtaining the yield surface of multi-dowelled timber connections by using a feasible direction method [Paper presentation]. 7th National Congress on Theoretical and Applied Mechanics, Mons, Belgium.

Descamps, T., Datoussaïd, S., & VanParys, L. (2006). Discrete minimum weight design under static and dynamic constraints [Paper presentation]. 9th World Conference on Timber Engineering, Portland, United States - Oregon.

Laplume, D., Datoussaïd, S., & Guerlement, G. (01 January 2006). Minimum-weight design of solid annular plates under an assigned limit ring load. Structural and Multidisciplinary Optimization, 31 (6), 480-487.

VanParys, L., Lamblin, D., Kakol, W., & Datoussaïd, S. (01 November 2005). Behaviour of masonry arches: numerical simulations using ABAQUS compared with limit analysis approach and experimentation [Paper presentation]. Abaqus Users Conference AUC, Poznan, Poland.

VanParys, L., Dagrain, F., Lamblin, D., & Datoussaïd, S. (2005). Compressive strengh of historical mortars: on-site determination using the cutting test [Paper presentation]. Australian Structural Engineering Conference, Newcastle, New South Wales, Australia.

VanParys, L., Lamblin, D., Guerlement, G., Datoussaïd, S., & Descamps, T. (2005). Optimisation d'une prothèse trapézo-métacarpienne en relation avec le phénomène de remodelage osseux [Paper presentation]. XVIIè Congrès Français de Mécanique, Troyes, France.

Datoussaïd, S., Descamps, T., VanParys, L., & Guerlement, G. (2005). Discrete minimum weight design under static and dynamic constraints [Paper presentation]. XVIIè Congrès Français de Mécanique, Troyes, France.

Datoussaïd, S., VanParys, L., Lamblin, D., & Descamps, T. (2005). Structural behaviour of the flying-butresses of the OL-Cathedral of Tournai (Belgium) [Paper presentation]. Australian Structural Engineering Conference, Newcastle, New South Wales, Australia.

VanParys, L., Dagrain, F., Coudyzer, C., & Datoussaïd, S. (2005). On-site determination of compressive strenght for historical mortars with the scratching test: method and preliminary results [Paper presentation]. 10th Canadian Masonry Symposium Calgary, Calgary, Canada.

Descamps, T., Lamblin, D., VanParys, L., & Datoussaïd, S. (2005). The restoration of the framings of the Cathedral of Tournai [Paper presentation]. 4th International Conference on Heritage of Technology, Gdansk, Poland.

Descamps, T., Guerlement, G., VanParys, L., & Datoussaïd, S. (2005). Engineering and heritage preservation: development of a new technic for the protection of historical timber structure [Paper presentation]. 4th International Conference on Heritage of Technology, Gdansk, Poland.

Descamps, T., VanParys, L., & Datoussaïd, S. (2005). Impact test to predict wood properties [Paper presentation]. 14th International Symposium on Nondestructive Testing of Wood, Hannover, Germany.

Datoussaïd, S., Guerlement, G., & Laplume, D. (2005). Discrete optimisatioin of steel frames - Minimum weight design under static and dynamic constraints [Paper presentation]. 4th European Conference on Steel Composite Structures, Maastricht, Netherlands.

VanParys, L., Lamblin, D., Guerlement, G., Datoussaïd, S., & Descamps, T. (2004). The behaviour of the gothic foundation of the OL-Cathedral of Tournai [Paper presentation]. 13th International Brick/Block Masonry Conference, Amsterdam, Netherlands.

Lamblin, D., Datoussaïd, S., Descamps, T., & VanParys, L. (2003). Etude préliminaire de stabilité pour la charpente en béton armé de la nef romane de la cathédrale de Tournai.

Datoussaïd, S., Guerlement, G., Laplume, D., & Descamps, T. (2003). Measurement of the effective stiffness of base plate column connection in piping industry [Paper presentation]. 15th International Conference on Computer Methods in Mechanics, .

Verlinden, O., Kouroussis, G., Datoussaïd, S., & Conti, C. (2003). Open source symbolic and numerical tools for the simulation of multibody systems [Paper presentation]. 6th National Congress on Theoretical and Applied Mechanics, Gand, Belgium.

Datoussaïd, S., Descamps, T., Guerlement, G., & Laplume, D. (2003). Measurement of the effective stiffness of base plate column connection in piping industry [Paper presentation]. 15th International Conference on Computer Methods in Mechanics, .

Datoussaïd, S., Guerlement, G., & VanParys, L. (2003). Discrete minimum weight design under static and dynamic constraints [Paper presentation]. 6th National Congress on Theoretical and Applied Mechanics, Gand, Belgium.

Datoussaïd, S., Guerlement, G., & Laplume, D. (2003). Optimal design of steel skeletons under cumulative industrial constraints [Paper presentation]. 24th Congress of Theoritical and Applied Mechanics, Belgrade, Serbia.

Datoussaïd, S., Verlinden, O., & Conti, C. (01 January 2002). Application of Evolutionary Strategies to Optimal Design of Multibody Systems. Multibody System Dynamics, 8, 393-408.

Datoussaïd, S., Guerlement, G., Lamblin, D., & Ledoux, P. (2002). Finite element simulation of bone remodeling in relation with a metacarpal prosthesis [Paper presentation]. 1st International Aachener Workshop on biomechanics 'Selected problems in Endorprosthetics', Aachen, Germany.

Datoussaïd, S., Guerlement, G., Lamblin, D., & Ledoux, P. (2002). Finite element modeling of load transmission through the wrist and related pathologies [Paper presentation]. 1st International Aachener Workshop on biomechanics 'Selected problems in Endorprosthetics', Aachen, Germany.

Datoussaïd, S., Guerlement, G., Gutkowski, W., & Zawidzka, J. (2001). Simple and maybe nearly optimal design of beam structures with real industrial constraints [Paper presentation]. Mathematical and Engineering Aspects of Optimal Design of Materials and Structures, Poznan, Poland.

Datoussaïd, S., & Guerlement, G. (2001). Wood characteristics determination by penetration [Paper presentation]. Culture 2000 Project : Italian Action, .

Datoussaïd, S., Guerlement, G., Lamblin, D., & Ledoux, P. (2001). Bone remodeling for metacarpal joint prosthesis [Paper presentation]. 17th Conference of Biomechanics, Zakopane, Poland.

Conti, C., Datoussaïd, S., & Verlinden, O. (01 January 2001). Comparison of the Use of GAs and ESs for the Optimization of Multibody Systems [Paper presentation]. 15th European Simulation Multiconference Prague, Tchéquie 6-9 juin, Prague, Czechia.

Datoussaïd, S., De Saedeleer, B., Verlinden, O., & Conti, C. (31 December 1999). Vehicle/track interaction and ground propagation of vibrations for urban railway vehicles. European Journal of Mechanical and Environmental Engineering, 45 (2), 87-93.
Peer reviewed

Conti, C., Datoussaïd, S., & Verlinden, O. (01 January 1999). Optimal design of multibody systems using genetic algorithms [Paper presentation]. Design Engineering Technical Conference, Las Vegas, United States - Nevada.

Datoussaïd, S., Verlinden, O., & Conti, C. (01 January 1999). Application of evolutionary strategies to optimal design of multibody systems [Paper presentation]. EUROMECH Colloquium 404 Advance in Computational Multibody Dynamics, Lisbonne, Portugal.

De Saedeleer, B., Bilon, S., Datoussaïd, S., & Conti, C. (1998). Vehicle/Track interaction and ground propagation of vibrations for tramway tracks in urban areas [Paper presentation]. International Workshop on Railway Vibration and Rail Vehicle Dynamics, Barcelone, Spain.

Datoussaïd, S., Hadjit, R., Verlinden, O., & Conti, C. (1998). Optimal design of multibody systems by using genetic algorithms [Paper presentation]. 15th IAVSD Symposium (International Association for Vehicle System Dynamics), Budapest, Hungary.

Datoussaïd, S., Hadjit, R., Verlinden, O., & Conti, C. (03 January 1998). Optimization design of multibody systems by using genetic algorithms. Vehicle System Dynamics, 29 (Supplement), 704-711.
Peer Reviewed verified by ORBi

Datoussaïd, S., Verlinden, O., Wenderloot, L., & Conti, C. (01 January 1998). Computer aided analysis of urban railway vehicles. Vehicle System Dynamics, 30 (3-4), 213-227.
Peer Reviewed verified by ORBi

Datoussaïd, S., Verlinden, O., Wenderloot, L., & Conti, C. (1997). Computer Aided Dynamics of Urban Railway Vehicles [Paper presentation]. International Workshop on Computer Simulation of Rail Vehicle Dynamics, Manchester, Unknown/unspecified.

Datoussaïd, S., Verlinden, O., & Conti, C. (1997). Optimisation du comportement de systèmes multicorps basée sur l'utilisation d'algorithmes évolutionnaires [Paper presentation]. 4th National Congress on Theoretical and Applied Mechanics, Leuven, Belgium.

Datoussaïd, S., Verlinden, O., Dehombreux, P., & Conti, C. (1996). Optimal design of multibody systems [Paper presentation]. 3rd International Conference on Dynamics and Control of Structures in Space, Londres, Unknown/unspecified.

Conti, C., Dehombreux, P., Verlinden, O., & Datoussaïd, S. (01 January 1996). Analysis of the Performance of Operational Data Analysis Methods. Mechanical Systems and Signal Processing, 10 (5), 579-593.
Peer Reviewed verified by ORBi

Datoussaïd, S., Dehombreux, P., Verlinden, O., & Conti, C. (1995). Optimisation du comportement dynamique de mécanismes à structure cinématique fermée [Paper presentation]. Congrès StruCoMe, Paris, France.

Verlinden, O., Dehombreux, P., Datoussaïd, S., & Conti, C. (1995). Track-to-wheelset and road-to-wheel elements for modelling vehicles with relative coordinates [Paper presentation]. International Scientific Conference - Transport session, University of Ostrava, Czechia.

Conti, C., Dehombreux, P., Verlinden, O., & Datoussaïd, S. (1995). Analysis of the performance of Operational Data Analysis Methods [Paper presentation]. International Conference on Vibration and Noise, Venise, Italy.

Datoussaïd, S., Lefebvre, J. F., Verlinden, O., & Conti, C. (1994). Analyse des véhicules multi-caisses à structure cinématique complexe [Paper presentation]. 3ème Congrès National Belge de Mécanique Théorique et Appliquée, Liège, Belgium.

Dehombreux, P., Conti, C., Verlinden, O., & Datoussaïd, S. (1993). Analyse dynamique des systèmes multicorps contraints [Paper presentation]. 2ème Congrès Français de Mécanique, Lille - Villeneuve d'Ascq, France.

Datoussaïd, S., Verlinden, O., Conti, C., & Dehombreux, P. (1993). Méthodologie d'analyse dynamique latérale de véhicules ferroviaires urbains [Paper presentation]. International Symposium on Technological Innovation in guided transport, Lille, France.

Conti, C., Dehombreux, P., Verlinden, O., & Datoussaïd, S. (01 January 1993). ACIDYM, a modular software for computer-aided learning of kinematics and dynamics analysis of multibody system. Advanced Multibody System Dynamics : Simulation and Software Tools, 20, 361-366.
Peer reviewed

Contact ORBi UMONS