Profil

Rivière Edouard

Université de Mons - UMONS > Faculté Polytechnique > Service de Génie Mécanique

Université de Mons - UMONS > Faculté Polytechnique > Génie Mécanique

ORCID
0000-0002-4871-3910
Principaux co-auteurs référencés
DUCOBU, François  (174)
Filippi, Enrico  (124)
Demarbaix, Anthonin  (35)
DEHOMBREUX, Pierre  (32)
VERLINDEN, Olivier  (32)
Principaux mots-clés référencés
Simulation (5); Additive manufacturing (4); Machining (4); milling (4); PAM (4);
Principaux centres et unités de recherche référencés
CRIM - Ingénierie des matériaux (110)
BIOSYS - Biosys (1)
CRPM - Physique des matériaux (1)
URBAINE - Urbanisation Revitalisation Bâtiment Architecture Innovations Espaces (1)
Principales disciplines référencées
Ingénierie mécanique (222)
Science des matériaux & ingénierie (80)
Physique (69)
Sciences de l’environnement & écologie (58)
Mathématiques (10)

La plus téléchargée
188 téléchargements
Ducobu, F., Rivière, E., & Filippi, E. (01 September 2016). Application of the Coupled Eulerian-Lagrangian (CEL) method to the modeling of orthogonal cutting. European Journal of Mechanics. A, Solids, 59, 58-66. doi:10.1016/j.euromechsol.2016.03.008 https://hdl.handle.net/20.500.12907/22979

La plus citée

268 citations (Scopus®)

Rivière, E. (2019). Journal télévisé RTBF: Coupe d'europe de robotique. https://hdl.handle.net/20.500.12907/14728

Spitaels, L., Naiara Aldeiturriaga Olabarri, Bossu, J., Martic, G., Juste, E., Arrazola, P.-J., Rivière, E., & Ducobu, F. (2024). Tool wear for finishing milling of green thermoplastic-ceramic composites fabricated with pellet AM. Procedia CIRP, 121, 97-102. doi:10.1016/j.procir.2023.09.235
Peer reviewed vérifié par ORBi

Fabrice Petit, Cathy Delmotte, Grégory Martic, Enrique Juste, Spitaels, L., Rivière, E., Ducobu, F., Bossu, J., & Delaunois, F. (29 September 2023). Evaluation of the suitability of Pellet Additive Manufacturing technology for the design & manufacturing of complex ceramic parts [Paper presentation]. IWAC (INTERNATIONAL WORKSHOP ON ADVANCED CERAMICS, IWAC09), Limoges, France.

Ducobu, F., Spitaels, L., Martic, G., Juste, E., & Rivière, E. (25 August 2023). Hybrid manufacturing of components made of engineering ceramics [Paper presentation]. 72nd CIRP General Assembly - STC-C meeting.
Peer reviewed

Ducobu, F., Demarbaix, A., Rivière, E., Spitaels, L., Petit, F., Preux, N., Duterte, C., Mulliez, M., & Lauwers, B. (20 June 2023). Impact of Green Ceramic Hybrid Machining (GCHM) on Reliability and Repeatability of the Properties of Sintered Yttrium-Tetragonal Zirconia Polycrystal Parts. Journal of Manufacturing and Materials Processing, 7 (3), 118. doi:10.3390/jmmp7030118
Peer reviewed vérifié par ORBi

Rivière, E., Spitaels, L., Bossu, J., Martic, G., Delaunois, F., & Ducobu, F. (01 June 2023). Optimal Machining Parameters Determination of Polymers-Ceramic Composite for Hybrid Manufacturing [Paper presentation]. 19th CIRP Conference on Modelling of Machining Operations, CIRP CMMO, Karlsruhe, Germany.
Peer reviewed

Ducobu, F., Kugalur Palanisamy, N., Arrazola, P.-J., & Rivière, E. (01 June 2023). Application of material constitutive and friction models parameters identified with AI and ALE to a CEL orthogonal cutting model [Paper presentation]. 19th CIRP Conference on Modelling of Machining Operations, CIRP CMMO, Karlsruhe, Germany.
Peer reviewed

Dambly, V., Rivière, E., & Verlinden, O. (31 May 2023). Coupled Dynamic Simulator with Tri-Dexel Milling Module for Robotic Machining Operations. Procedia CIRP, 117, 175 - 180. doi:10.1016/j.procir.2023.03.031
Peer reviewed vérifié par ORBi

Ducobu, F., Palanisamy, N. K., Arrazola, P.-J., & Rivière, E. (03 May 2023). Application of material constitutive and friction models parameters identified with AI and ALE to a CEL orthogonal cutting model. Procedia CIRP, 117, 311-316. doi:10.1016/j.procir.2023.03.053
Peer reviewed vérifié par ORBi

Spitaels, L., Rivière, E., Gregory Martic, Enrique Juste, & Ducobu, F. (19 April 2023). Machining of PAM green Y-TZP: Influence of build and in-plane directions on cutting forces and surface topography. Materials Research Proceedings, 28, 1245-1253. doi:10.21741/9781644902479-135
Peer reviewed

Spitaels, L., Rivière, E., Martic, G., Juste, E., & Ducobu, F. (19 April 2023). Machining of PAM green Y-TZP: Influence of build and in-plane directions on cutting forces and surface topography [Paper presentation]. 26th International ESAFORM Conference on Material Forming, ESAFORM 2023.
Peer reviewed

Dambly, V., Rivière, E., Ducobu, F., & Verlinden, O. (2023). Tri-dexel-based cutter-workpiece engagement: computation and validation for virtual machining operations. International Journal of Advanced Manufacturing Technology. doi:10.1007/s00170-023-10950-z
Peer reviewed vérifié par ORBi

Spitaels, L., Dantinne, H., Bossu, J., Rivière, E., & Ducobu, F. (10 March 2023). A Systematic Approach to Determine the Cutting Parameters of AM Green Zirconia in Finish Milling. Journal of Composites Science, 7 (3), 112. doi:10.3390/jcs7030112
Peer reviewed vérifié par ORBi

Dehombreux, P., Rivière, E., Equeter, L., Verlinden, O., & Olivier, B. (2023). Time2Go4.0 - Collaborative Projects for Top Indstrial Managers in Sustainable Industry 4.0 - How to ensure quality of preparation and execution of collaborative blended design projects including 4.0 and sustainability aspects?

Rivière, E., Spitaels, L., Bossu, J., Martic, G., Delaunois, F., & Ducobu, F. (2023). Optimal Machining Parameters Determination of Polymers-Ceramic Composite for Hybrid Manufacturing. Procedia CIRP, 117, 456-461. doi:10.1016/j.procir.2023.03.077
Peer reviewed vérifié par ORBi

Bossu, J., Delaunois, F., Spitaels, L., Ducobu, F., & Rivière, E. (08 December 2022). HYbrid PROduction of Pellets-based (PIM-MIM-CIM) Additive Manufactured parts - HyProPAM [Paper presentation]. Conférence méca, Mons, Belgium.

Bossu, J., Delaunois, F., Martic, G., Delmotte, C., Spitaels, L., Ducobu, F., & Rivière, E. (24 October 2022). Pellets Additive Manufacturing of dense Tosoh black zirconia parts [Poster presentation]. Conférence internationale Matériaux 2022, Lille, France.

Leroy, C., Lavernhe, S., & Rivière, E. (21 October 2022). Lissage et rééchantillonnage de trajectoires curvilinéaires par splines d'Hermite [Paper presentation]. Manufacturing 21, Gif-sur-Yvette (Paris), France.

Bossu, J., Delaunois, F., Spitaels, L., Ducobu, F., & Rivière, E. (06 September 2022). Production hybride de pièces fabriquées par additif à base de granulés (PIM-MIM-CIM) (Win²Wal – HyProPAM) [Poster presentation]. Mardi des chercheurs, Mons, Belgium.

Spitaels, L., Rivière, E., Bossu, J., & Ducobu, F. (September 2022). Hybrid Manufacturing of Complex Ceramic Parts with Tight Tolerances and Smooth Surface Topography [Poster presentation]. Mardi des Chercheurs - onzième éditions (2022), Mons, Belgium.

Spitaels, L., Rivière, E., Díaz, M. C., Duquesnoy, J., & Ducobu, F. (09 June 2022). Surface finishing of EBM parts by (electro-)chemical etching [Paper presentation]. 6th CIRP Conference on Surface Integrity.

Beuscart, T., Rivière, E., Ducobu, F., & Arrazola, P.-J. (08 June 2022). Hole quality analysis of AISI 304-GFRP stacks using robotic drilling [Paper presentation]. 6th CIRP Conference on Surface Integrity.

KUGALUR PALANISAMY, N., RIVIERE LORPHEVRE, E., Gobert, M., Briffoteaux, G., Tuyttens, D., Arrazola, P.-J., & DUCOBU, F. (06 June 2022). Identification of the Parameter Values of the Constitutive and Friction Models in Machining Using EGO Algorithm: Application to Ti6Al4V. Metals, 12 (6), 976. doi:10.3390/met12060976
Peer reviewed vérifié par ORBi

Spitaels, L., Rivière, E., Demarbaix, A., Thielens, V., & Ducobu, F. (01 June 2022). Performances assessment of two FDM printers using a benchmark artifact [Poster presentation]. euspen's 22 nd International Conference & Exhibition.
Peer reviewed

Spitaels, L., Rivière, E., Díaz, M. C., Duquesnoy, J., & Ducobu, F. (01 June 2022). Surface finishing of EBM parts by (electro-)chemical etching. Procedia CIRP, 108, 112-117. doi:10.1016/j.procir.2022.03.023
Peer reviewed vérifié par ORBi

Spitaels, L., Rivière, E., Demarbaix, A., Thielens, V., & Ducobu, F. (2022). Dimensional and geometrical performance assessment of two FDM printers using a benchmark artifact. Proceedings of the European Society for Precision Engineering and Nanotechnology - 22nd International Conference and Exhibition, 69-72.
Peer reviewed

Dambly, V., Rivière, E., & Verlinden, O. (June 2022). Tri-Dexel Based Cutter-Workpiece Engagement Determination For Robotic Machining Simulator. Procedia CIRP, 107, 1059 - 1064. doi:10.1016/j.procir.2022.05.108
Peer reviewed vérifié par ORBi

Beuscart, T., Arrazola, P.-J., Rivière, E., Flores, P., & Ducobu, F. (May 2022). Hole quality analysis of AISI 304-GFRP stacks using robotic drilling. Procedia CIRP, 108, 436-441. doi:10.1016/j.procir.2022.03.068
Peer reviewed vérifié par ORBi

Kugalur Palanisamy, N., Rivière, E., Arrazola, P.-J., & Ducobu, F. (28 April 2022). Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V. Key Engineering Materials, 926, 1619-1628. doi:10.4028/p-be47dp
Peer reviewed vérifié par ORBi

Kugalur palanisamy, N., Rivière, E., Arrazola, P.-J., & Ducobu, F. (28 April 2022). Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V [Paper presentation]. 25th International Conference on Material Forming, ESAFORM 2022.

Spitaels, L., Rivière, E., Demarbaix, A., & Ducobu, F. (17 March 2022). Adaptive benchmarking design for additive manufacturing processes. Measurement Science and Technology, 33 (064003).
Peer reviewed vérifié par ORBi

Dambly, V., Huynh, H. N., Verlinden, O., & Rivière, E. (2021). Coupled multibody model of industrial robot with milling simulator for trajectory compensation. ECCOMAS Multibody Dynamics Conference Proceedings. doi:10.3311/ECCOMASMBD2021-139
Peer reviewed

Demarbaix, A., Ducobu, F., Preux, N., Petit, F., & Rivière, E. (06 September 2021). Binder influence on green ceramic machining by means of milling and laser machining. Procedia CIRP, 101, 206-209. doi:10.1016/j.procir.2021.02.023
Peer reviewed vérifié par ORBi

Demarbaix, A., Mulliez, M., Rivière, E., Spitaels, L., Dutertre, C., Preux, N., Petit, F., & Ducobu, F. (2021). Green Ceramic Machining: Determination of the Recommended Feed Rate for Y-TZP Milling. Journal of Composites Science.
Peer reviewed

Rivière, E., Broz Lofetigo, A., Dehombreux, P., Dvorak, J., Equeter, L., Hosnedl, S., Marketa, K., Lazaroi Lechuga, E., Lindell, M., Lindgern, P., Nemec, L., Neuvonen, T., Olivier, B., Ranalli, M., Varhelahti, M., Varona Alabern, M., Verlinden, O., & Cepickova, J. (2021). MUPIC: MULTIDISCIPLINARY PROJECT IN AN INTERNATIONAL CONTEXT. In Hans-Ulrich Heiss (Ed.), Proceedings of SEFI 49th Annual Conference Blended Learning in Engineering Education: challenging, enlightening – and lasting?Berlin, Unknown/unspecified: Technische universitat Berlin.
Peer reviewed

Spitaels, L., Rivière, E., Demarbaix, A., & Ducobu, F. (2021). Development of a novel benchmark artifact for Additive Manufacturing processes. Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, 99-102.
Peer reviewed

Dambly, V., Huynh, H. N., Rivière, E., & Verlinden, O. (2021). Development of tri-dexel based cutting simulator for cutter-workpiece engagement and cutting forces determination. Procedia euspen.
Peer reviewed

Spitaels, L., Rivière, E., Anthonin, D., & Ducobu, F. (June 2021). Development of a novel benchmark artifact for Additive Manufacturing processes [Poster presentation]. euspen’s 21st International Conference & Exhibition.
Peer reviewed

Kugalur Palanisamy, N., Rivière, E., Arrazola, P., & Ducobu, F. (29 May 2021). Influence of Constitutive Models and the Choice of the Parameters on FE Simulation of Ti6Al4V Orthogonal Cutting Process for Different Uncut Chip Thicknesses. Journal of Manufacturing and Materials Processing, 5.
Peer reviewed vérifié par ORBi

Demarbaix, A., Ducobu, F., Preux, N., Petit, F., & Rivière, E. (24 May 2021). Binder influence on green ceramic machining by means of milling and laser machining [Paper presentation]. 9th CIRP Conference on High Performance Cutting, HPC 2020.

Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 May 2021). On the selection of an empirical material constitutive model for the finite element modeling of Ti6Al4V orthogonal cutting, including the segmented chip formation. International Journal of Material Forming, 4 (3), 361 - 374. doi:10.1007/s12289-020-01535-2
Peer reviewed vérifié par ORBi

Beuscart, T., Arrazola, P., Rivière, E., & Ducobu, F. (14 April 2021). Development and experimental validation of a macroscopic analytical model aiming to generate metal-FRP stacks drilling cutting force and torque. 24th International ESAFORM Conference on Material Forming, ESAFORM 2021, 2373. doi:10.25518/esaform21.2373
Peer reviewed

Kugalur Palanisamy, N., Rivière, E., Arrazola, P., & Ducobu, F. (2021). Influences of cutting speed and material constitutive models on chip formation and their effects on the results of Ti6Al4V orthogonal cutting simulation [Paper presentation]. ESAFORM 2021, Liège, Belgium.

Beuscart, T., Arrazola, P.-J., Rivière, E., & Ducobu, F. (14 April 2021). Development and experimental validation of a macroscopic analytical model aiming to generate metal-FRP stacks drilling cutting force and torque [Paper presentation]. 24th International ESAFORM Conference on Material Forming, ESAFORM 2021.

Dambly, V., Verlinden, O., & Rivière, E. (20 March 2021). Robotic Milling: Development of 3D milling forces computation module for tool trajectories adaptation [Poster presentation]. Mardi des chercheurs, Valenciennes, France.

Beuscart, T., Ducobu, F., & Rivière, E. (2021). Etude de l'usinage robotique de stacks métaux-composites [Poster presentation]. Mardi des chercheurs 2021, Valenciennes, France.

Demarbaix, A., Ducobu, F., Juste, E., Petit, F., DUTERTE, C., & Rivière, E. (01 January 2021). Experimental investigation on green ceramic machining with nanosecond laser source. Journal of Manufacturing Processes, 61, 245-253. doi:10.1016/j.jmapro.2020.11.031
Peer reviewed

Huynh, H. N., Assadi, H., Dambly, V., Rivière, E., & Verlinden, O. (30 September 2020). Direct method for updating flexible multibody systems applied to a milling robot. Robotics and Computer-Integrated Manufacturing, 68, 102049. doi:10.1016/j.rcim.2020.102049
Peer reviewed vérifié par ORBi

Ducobu, F., Rivière, E., Demarbaix, A., & Lauwers, B. (15 August 2020). Prediction of local sintering in laser beam machining of green Y-TZP ceramic [Paper presentation]. 69th CIRP General Assembly, Munich, Germany.
Peer reviewed

Zhao, L., Santos Macias, J. G., Dolimont, A., Simar, A., & Rivière, E. (12 August 2020). Comparison of residual stresses obtained by the crack compliance method for parts produced by different metal additive manufacturing techniques and after friction stir processing. Additive Manufacturing, 36, 101499. doi:10.1016/j.addma.2020.101499
Peer reviewed vérifié par ORBi

Demarbaix, A., Ducobu, F., Petit, F., & Rivière, E. (2020). A new manufacturing chain for ceramic shaping: Sequential combination of milling and laser machining in green ceramic. Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology.
Peer reviewed

Demarbaix, A., Ducobu, F., Petit, F., & Rivière, E. (08 June 2020). A new manufacturing chain for ceramic shaping: Sequential combination of milling and laser machining in green ceramic [Poster presentation]. 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020.

Demarbaix, A., Ducobu, F., Preux, N., Petit, F., & Rivière, E. (21 May 2020). Green Ceramic Machining: Influence of the Cutting Speed and the Binder Percentage on the Y-TZP Behavior. Journal of Manufacturing and Materials Processing, 4 (50). doi:10.3390/jmmp4020050
Peer reviewed vérifié par ORBi

Kugalur Palanisamy, N., Ducobu, F., Rivière, E., & Arrazola, P. (2020). Influence of the Choice of the Parameters on Constitutive Models and their Effects on the Results of Ti6Al4V Orthogonal Cutting Simulation [Paper presentation]. Esaform 2020, Cottbus , Germany.

Spitaels, L., Ducobu, F., Demarbaix, A., Rivière, E., & Dehombreux, P. (27 April 2020). Influence of conventional machining on chemical finishing of Ti6Al4V Electron Beam Melting parts. Procedia Manufacturing, 47, 1036-1042. doi:10.1016/j.promfg.2020.04.321
Peer reviewed

Kugalur Palanisamy, N., Rivière, E., Ducobu, F., & Arrazola, P. (27 April 2020). Influence of the Choice of the Parameters on Constitutive Models and their Effects on the Results of Ti6Al4V Orthogonal Cutting Simulation. Procedia Manufacturing, 47, 458-465. doi:10.1016/j.promfg.2020.04.335
Peer reviewed

Ducobu, F., Rivière, E., Demarbaix, A., & Lauwers, B. (2020). Prediction of local sintering in laser beam machining of green Y-TZP ceramic. CIRP Annals - Manufacturing Technology. doi:10.1016/j.cirp.2020.04.051
Editorial reviewed

Spitaels, L., Ducobu, F., Demarbaix, A., Rivière, E., & Dehombreux, P. (04 April 2020). Influence of conventional machining on chemical finishing of Ti6Al4V electron beam melting parts [Paper presentation]. 23rd International Conference on Material Forming, ESAFORM 2020.

Equeter, L., Ducobu, F., Rivière, E., Serra, R., & Dehombreux, P. (27 March 2020). An Analytic Approach to the Cox Proportional Hazards Model for Estimating the Lifespan of Cutting Tools. Journal of Manufacturing and Materials Processing, 4 (27), 1-13. doi:10.3390/jmmp4010027
Peer reviewed vérifié par ORBi

Dutoit, C., Dehombreux, P., Rivière, E., & Equeter, L. (2019). Statistical Process Control and Maintenance Policies for Continuous Production Systems Subjected to Different Failure Impact Models: Literature Review. Procedia CIRP. doi:10.1016/j.procir.2020.01.050
Peer reviewed vérifié par ORBi

Equeter, L., Ducobu, F., Rivière, E., & Dehombreux, P. (02 October 2019). An Integrative Approach for Estimating Cutting Tools Wear in Turning [Poster presentation]. MS&T2019, Portland, United States - Oregon.

Huynh, H., Assadi, H., Rivière, E., Verlinden, O., & Ahmadi, K. (17 September 2019). Modelling the dynamics of industrial robots for milling operations. Robotics and Computer-Integrated Manufacturing, 61. doi:10.1016/j.rcim.2019.101852
Peer reviewed vérifié par ORBi

Demarbaix, A., Ducobu, F., Petit, F., & Rivière, E. (11 July 2019). Développement d'une platforme hybride pour la mise en forme de la céramique [Paper presentation]. Manufacturing 21, Mons, Belgium.

Rivière, E., Huynh, H., Ducobu, F., & Verlinden, O. (08 July 2019). Cutting Force Prediction in Robotic Machining. Procedia CIRP, 82, 509-514. doi:10.1016/j.procir.2019.04.143
Peer reviewed vérifié par ORBi

Leroy, C., Rivière, E., Ducobu, F., Lavernhe, S., Tournier, C., & Filippi, E. (02 July 2019). Performance simulation of different toolpaths in 2D1/2 pocket milling. AIP Conference Proceedings, 2113. doi:10.1063/1.5112609
Peer reviewed vérifié par ORBi

Benhassine, M., Rivière, E., Arrazola, P., Gobin, P., Granjon, A., Aizpuru, O., & Ducobu, F. (02 July 2019). Finite-element simulations of Al7075-T6 orthogonal cutting: Effect of part geometry and mesh on chip morphology and formation mechanism. AIP Conference Proceedings, 2113. doi:10.1063/1.5112611
Peer reviewed vérifié par ORBi

Kugalur Palanisamy, N., Rivière, E., Pedro, A., & Ducobu, F. (02 July 2019). Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting process. AIP Conference Proceedings, 2113. doi:10.1063/1.5112617
Peer reviewed vérifié par ORBi

Dolimont, A., Demarbaix, A., Ducobu, F., & Rivière, E. (02 July 2019). Chemical etching as a finishing process for electron beam melting (EBM) parts. AIP Conference Proceedings, 2113 (150020). doi:10.1063/1.5112696
Peer reviewed vérifié par ORBi

Ducobu, F., Rivière, E., Galindo-Fernandez, M., Ayvar-Soberanis, S., Arrazola, P., & Ghadbeigi, H. (13 June 2019). Coupled Eulerian-Lagrangian (CEL) simulation for modelling of chip formation in AA2024-T3. Procedia CIRP, 82, 142-147. doi:10.1016/j.procir.2019.04.071
Peer reviewed vérifié par ORBi

Rivière, E., Huynh, H. N., Verlinden, O., & Ducobu, F. (13 June 2019). Cutting force prediction in robotic machining [Paper presentation]. 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO.

Demarbaix, A., Rivière, E., Ducobu, F., Filippi, E., Petit, F., & Juste, E. (2019). Calibration method of hybrid machining process in the green ceramic combining micro-milling and laser machining. European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019, 76-77.
Peer reviewed

Demarbaix, A., Rivière, E., Ducobu, F., Dolimont, A., Petit, F., & Juste, E. (03 June 2019). Calibration method of hybrid machining process in the green ceramic combining micro-milling and laser machining [Poster presentation]. 19th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2019.

Ducobu, F., Rivière, E., Galindo-Fernandez, M., Ayvar-Soberanis, S., Arrazola, P., & Ghadbeigi, H. (01 June 2019). Coupled Eulerian-Lagrangian (CEL) simulation for modelling of chip formation in AA2024-T3 [Paper presentation]. 17th CIRP conference on modelling of machining operations, Sheffield, Unknown/unspecified.

Dolimont, A., Santos Macias, J. G., Lv, Z., Simar, A., & Rivière, E. (29 May 2019). Comparing residual stresses in metal powder bed additive manufacturing (SLM and EBM) [Paper presentation]. 4th Workshop in AM, Leuven, Belgium.

Rivière, E. (2019). Journal télévisé RTBF: Coupe d'europe de robotique.

Demarbaix, A., Rivière, E., & Dehombreux, P. (2019). UMONS: Plongée en sous-marin. journal sudinfo.

Kugalur palanisamy, N., Rivière, E., Arrazola, P.-J., & Ducobu, F. (08 May 2019). Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting process [Paper presentation]. 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019.

Leroy, C., Rivière, E., Ducobu, F., Lavernhe, S., Tournier, C., & Filippi, E. (08 May 2019). Performance simulation of different toolpaths in 2D1/2 pocket milling [Paper presentation]. 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019.

Dolimont, A., Demarbaix, A., Ducobu, F., & Rivière, E. (01 May 2019). Chemical etching as a finishing process for electron beam melting (EBM) parts [Paper presentation]. Esaform 2019, Vitoria-Gasteiz, Spain.

Benhassine, M., Rivière, E., Arrazola, P., Gobin, P., Granjon, A., Aizpuru, O., & Ducobu, F. (01 May 2019). Finite-element simulations of Al7075-T6 orthogonal cutting: Effect of part geometry and mesh on chip morphology and formation mechanism [Paper presentation]. Esaform 2019, Vitoria-Gasteiz, Spain.

Rivière, E. (2019). Télé MB: Les Atom-X se préparent pour la coupe de robotique.

Demarbaix, A., Rivière, E., Ducobu, F., & Petit, F. (03 April 2019). Hybrid platform: sequential combination of two technologies in shaping of ceramic materials [Poster presentation]. young Ceramists Additive Manufacturing Forum (yCAM), Mons, Belgium.

Huynh, H., Rivière, E., & Verlinden, O. (05 March 2019). Robotic Machining: Development & Validation of a Robotic Machining Numerical Model in order to Optimise the Cutting Parameters [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.

Leroy, C., Rivière, E., & Ducobu, F. (05 March 2019). Evaluation de l'efficacité temporelle de trajectoires d'évidement 2D1/2 [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.

Ducobu, F., & Rivière, E. (21 February 2019). Transition of the finite element modelling of orthogonal cutting (2D) to oblique cutting (3D) [Paper presentation]. CIRP Winter Meetings, Paris, France.
Peer reviewed

Leroy, C., Rivière, E., & Ducobu, F. (14 January 2019). Evaluation de l'efficacité temporelle de trajectoires en fraisage à l'aide de VPOp [Paper presentation]. Manufacturing 21, Toulon, France.

Verlinden, O., Huynh, H., Kouroussis, G., & Rivière, E. (01 December 2018). Modelling of flexible bodies with minimal coordinates by means of the corotational formulation. Multibody System Dynamics, 42 (4), 495-514. doi:10.1007/s11044-017-9609-0
Peer reviewed

Dehombreux, P., Dutoit, C., Equeter, L., Rivière, E., & Ducobu, F. (17 October 2018). Industrie 1.2.3.4.0 : quelle évolution pour la fonction maintenance? [Paper presentation]. Colloque international : Transformation Numérique des Entreprises - Industrie 4.0, Ecole Centrale Casablanca, Morocco.

Dutoit, C., Dehombreux, P., & Rivière, E. (2018). Using quality control in optimizing opportunistic maintenance. IFAC Proceedings Volumes.
Peer reviewed vérifié par ORBi

Huynh, H., Kouroussis, G., Verlinden, O., & Rivière, E. (2018). Modal updating of a 6-axis robot for milling application [Paper presentation]. Proceedings of the 25th International Congress on Sound and Vibration (ICSV25), Hiroshima, Japan.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (03 July 2018). Hybrid machining of Ceramic: Combination sequential milling and laser machining [Poster presentation]. The 5th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.

Huynh, H., Rivière, E., Ducobu, F., Ozcan, A., & Verlinden, O. (30 June 2018). Dystamill: a framework dedicated to the dynamic simulation of milling operations for stability assessment. International Journal of Advanced Manufacturing Technology, 98, 2109-2126. doi:10.1007/s00170-018-2357-3
Peer reviewed vérifié par ORBi

Huynh, H., Rivière, E., & Verlinden, O. (2018). Multibody modelling of a flexible 6-axis robot dedicated to robotic machining [Paper presentation]. The 5th Joint International Conference on Multibody System Dynamics, Lisbonne, Portugal.

Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (2018). Functionalization of Electron BeamMelting parts in order to guide finishing operations [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/23478

Dolimont, A., Rivière, E., Ducobu, F., & Backaert, S. (02 May 2018). Impact of chemical polishing on surface roughness and dimensional quality of electron beam melting process (EBM) parts. AIP Conference Proceedings, 1960 (140007). doi:10.1063/1.5034999
Peer reviewed

Lust, A., Steinfort, C., Rivière, E., & Ducobu, F. (01 May 2018). Engineers around the world - My experience abroad. Polytech.News, 56.

Ozcan, A., Rivière, E., & Ducobu, F. (23 April 2018). Corner smoothing of 2D milling toolpath using b-spline curve by optimizing the contour error and the feedrate. AIP Conference Proceedings, 1960 (070020). doi:10.1063/1.5034916
Peer reviewed vérifié par ORBi

Equeter, L., Ducobu, F., Rivière, E., Abouridouane, M., Klocke, F., & Dehombreux, P. (23 April 2018). Estimation of the Influence of Tool Wear on Force Signals: a Finite Element Approach in AISI 1045 Orthogonal Cutting. AIP Conference Proceedings, 1960 (070012). doi:10.1063/1.5034908
Peer reviewed vérifié par ORBi

Benhassine, M., Rivière, E., Arrazola, P., Gobin, P., Dumas, D., Madhavan, V., Aizpuru, O., & Ducobu, F. (23 April 2018). 2D simulations of orthogonal cutting of CFRP: Effect of tool angles on parameters of cut and chip morphology. AIP Conference Proceedings, 1960 (070005). doi:10.1063/1.5034901
Peer reviewed vérifié par ORBi

Equeter, L., Ducobu, F., Rivière, E., Abouridouane, M., Klocke, F., & Dehombreux, P. (23 April 2018). Estimation of the influence of tool wear on force signals: A finite element approach in AISI 1045 orthogonal cutting [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.

Dolimont, A., Rivière, E., Ducobu, F., & Backaert, S. (23 April 2018). Impact of chemical polishing on surface roughness and dimensional quality of electron beam melting process (EBM) parts [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.

Benhassine, M., Rivière, E., Arrazola, P.-J., Gobin, P., Dumas, D., Madhavan, V., Aizpuru, O., & Ducobu, F. (23 April 2018). 2D simulations of orthogonal cutting of CFRP: Effect of tool angles on parameters of cut and chip morphology [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.

Ozcan, A., Rivière, E., & Ducobu, F. (23 April 2018). Corner smoothing of 2D milling toolpath using b-spline curve by optimizing the contour error and the feedrate [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.

Demarbaix, A., Dolimont, A., Ducobu, F., Equeter, L., Huynh, H., Leroy, C., Ozcan, A., & Rivière, E. (07 March 2018). Manumons [Poster presentation]. 1ère journée doctorale transfontalière, Reims Champagne-Ardenne , France.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (07 February 2018). Behaviour of pre-sintered Y-TZP during machining operations: Determination of recommended cutting parameters. Journal of Manufacturing Processes, 32, 85-92. doi:10.1016/j.jmapro.2018.01.020
Peer reviewed

Rivière, E., Huynh, H., & Verlinden, O. (11 January 2018). Influence of the time step selection on dynamic simulation of milling operation. International Journal of Advanced Manufacturing Technology, 95 (9-12), 4497-4512. doi:10.1007/s00170-017-1570-9
Peer reviewed vérifié par ORBi

Huynh, H., Verlinden, O., & Rivière, E. (2017). Robotic Machining Simulation using a Simplified Multibody Model [Paper presentation]. DAAAM International Symposium on Intelligent Manufacturing and Automation, Zadar, Croatia.

Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (16 October 2017). Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters. AIP Conference Proceedings, 1896. doi:10.1063/1.5008036
Peer reviewed

Ducobu, F., Rivière, E., & Filippi, E. (05 September 2017). Reduction of the mesh size influence on the results of a lagrangian finite element machining model. Proceedings of the 14th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2017, 2017, 226-234.
Peer reviewed

Ducobu, F., Rivière, E., & Filippi, E. (01 September 2017). REDUCTION OF THE MESH SIZE INFLUENCE ON THE RESULTS OF A LAGRANGIAN FINITE ELEMENT MACHINING MODEL [Paper presentation]. XIV International Conference on Computational Plasticity. Fundamentals and Applications, Barcelone, Spain.

Huynh, H., Rivière, E., & Verlinden, O. (09 August 2017). Report of robotic machining measurements using a Stäubli TX200 robot: application to milling [Paper presentation]. ASME 2017 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE2017), Cleveland, United States - Ohio.

Ducobu, F., Rivière, E., & Filippi, E. (04 July 2017). Lagrangian Finite Element Machining Model with Damage: a Question of Size [Poster presentation]. The 4th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.

Ozcan, A., Rivière, E., Huynh, H., Ducobu, F., Filippi, E., & Verlinden, O. (04 July 2017). Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs [Poster presentation]. The 4th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.

Equeter, L., Dehombreux, P., Ducobu, F., Rivière, E., & Serra, R. (04 July 2017). Experimental Measurement of Wear Indicators for Estimating the Tool Remaining Useful Life [Poster presentation]. 4ème Journée des Chercheurs de l'Institut Matériaux, UMONS, Belgium.

Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 June 2017). Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters [Paper presentation]. workshop additive manufacturing, Louvain-la-Neuve, UCL, Belgium.
Peer reviewed

Ducobu, F., Pedro, A., Rivière, E., Ortiz De Zarate, G., Madariaga, A., & Filippi, E. (16 June 2017). The CEL method as an alternative to the current modelling approaches for Ti6Al4V orthogonal cutting simulation. Procedia CIRP, 58, 245-250. doi:10.1016/j.procir.2017.03.188
Peer reviewed vérifié par ORBi

Ozcan, A., Rivière, E., Huynh, H., Ducobu, F., Verlinden, O., & Filippi, E. (15 June 2017). Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs. Procedia CIRP, 58, 239-244. doi:10.1016/j.procir.2017.03.187
Peer reviewed vérifié par ORBi

Ozcan, A., Rivière, E., Huynh, H. N., Ducobu, F., Verlinden, O., & Filippi, E. (15 June 2017). Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs [Paper presentation]. 16th CIRP Conference on Modelling of Machining Operations, CIRP CMMO 2017.

De Formanoir, C., Brulard, A., Vivès, S., Guilhem, M., Prima, F., Michotte, S., Rivière, E., Dolimont, A., & Godet, S. (04 June 2017). A strategy to improve the work-hardening behavior of Ti-6Al-4V parts produced by additive manufacturing. Materials Research Letters, 5 (4), 201-208. doi:10.1080/21663831.2016.1245681
Peer reviewed

Ducobu, F., Rivière, E., & Filippi, E. (01 June 2017). Mesh influence in orthogonal cutting modelling with the Coupled Eulerian-Lagrangian (CEL) method. European Journal of Mechanics. A, Solids, 65, 324-335. doi:10.1016/j.euromechsol.2017.05.007
Peer reviewed vérifié par ORBi

Avez, C., Coussement, G., Debailleux, L., Delaunois, F., Descamps, F., Ducobu, F., Dumont, E., Lupant, D., Rivière, E., & Vitry, V. (01 June 2017). Les techniques optiques de pointe au service de l'Ingénieur. Polytech.News, 55.

Ducobu, F., Arrazola, P., Rivière, E., Ortiz De Zarate, G., Madariaga, A., & Filippi, E. (01 June 2017). The CEL method as an alternative to the current modelling approaches for Ti6Al4V orthogonal cutting simulation [Paper presentation]. 16th CIRP Conference on Modelling of Machining Operations, Cluny, France.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (30 May 2017). The Hybrid Machining of Ceramic The choice of production stage [Poster presentation]. euspen's 17th International Conference & Exhibition, Hanovre, Germany.

Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., & Petit, F. (2017). The Hybrid Machining of Ceramic: The choice of production stage. Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, 111-112.
Peer reviewed

Ducobu, F., Rivière, E., & Filippi, E. (28 May 2017). Finite element modelling of 3D orthogonal cutting experimental tests with the Coupled Eulerian-Lagrangian (CEL) formulation. Finite Elements in Analysis and Design, 134, 27-40. doi:10.1016/j.finel.2017.05.010
Peer reviewed vérifié par ORBi

Ducobu, F., Rivière, E., & Filippi, E. (01 May 2017). Experimental and numerical investigation of the uncut chip thickness reduction in Ti6Al4V orthogonal cutting. Meccanica, 52, 1577-1592. doi:10.1007/s11012-016-0499-7
Peer reviewed

Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (26 April 2017). Influence on surface characteristics of electron beam melting process (EBM) by varying the process parameters [Paper presentation]. 20th International ESAFORM Conference on Material Forming, ESAFORM 2017.

Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (07 March 2017). Influence of process parameters on surface roughness of EBM [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgique, 2017, Mons, Belgium.

Ozcan, A., Rivière, E., Ducobu, F., Filippi, E., Verlinden, O., & Huynh, H. (07 March 2017). Modélisation macroscopique d'usinage de poche en tenant compte des efforts de coupe et du contrôle [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.

Leroy, C., Wattiaux, D., Dolimont, A., & Rivière, E. (07 March 2017). L'impression 3D comme outil d'aide dans un cours de géométrie [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.

Huynh, H., Rivière, E., & Verlinden, O. (07 March 2017). Robotic Machining: Development & Validation of a Robotic Machining Numerical Model in order to Optimise the Cutting Parameters [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (07 March 2017). The Hybrid Machining of Ceramic: The choice of production stage [Poster presentation]. 8e édition montoise du MdC2017, Mons, Belgium.

Equeter, L., Dehombreux, P., Ducobu, F., Rivière, E., & Serra, R. (07 March 2017). Design of Experiment: Wear Indicators for Cutting Tools: Estimate of Tool Remaining Useful Life [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (07 March 2017). Lagrangian Finite Element Machining Model with Damage: a Question of Size [Poster presentation]. Mardi des Chercheurs (MdC2017), Mons, Belgium.

Demarbaix, A., Dolimont, A., Ducobu, F., Equeter, L., Huynh, H., Leroy, C., Ozcan, A., & Rivière, E. (07 March 2017). Manumons: An informal research group gathering the researc activities linked to the manufacturing technologies [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (07 January 2017). On the importance of the choice of the parameters of the Johnson-Cook constitutive model and their influence on the results of a Ti6Al4V orthogonal cutting model. International Journal of Mechanical Sciences, 122, 143-155. doi:10.1016/j.ijmecsci.2017.01.004
Peer reviewed vérifié par ORBi

Rivière, E., Letot, C., Ducobu, F., Dehombreux, P., & Filippi, E. (01 January 2017). Dynamic simulation of milling operations with small diameter milling cutters: effect of material heterogeneity on the cutting force model. Meccanica, 52 (1-2), 35-44. doi:s11012-016-0398-y
Peer reviewed

Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (19 October 2016). Effect of HIPping (Hot Isostatic Pressing) on Electron Beam Melting Ti6Al4V parts after machining. AIP Conference Proceedings, 1769. doi:10.1063/1.4963616
Peer reviewed

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2016). La nuit des chercheurs: L'usinage hybride: Combinaison séquentielle fraisage et usinage laser.

Huynh, H., Rivière, E., & Verlinden, O. (15 September 2016). Milling Simulations with a 3-DOF Flexible Planar Robot. International Journal of Industrial and Manufacturing Engineering, 10 (9), 1661-1670.
Peer reviewed

Wattiaux, D., Verlinden, O., Rivière, E., & Renotte, C. (2016). Virtual and rapid prototyping to develop spatial visualization skills of students in engineering [Paper presentation]. 44th Annual Conference of the European Society for Engineering Education (SEFI 2016), Tampere, Finland.

Ducobu, F., Rivière, E., & Filippi, E. (01 September 2016). Application of the Coupled Eulerian-Lagrangian (CEL) method to the modeling of orthogonal cutting. European Journal of Mechanics. A, Solids, 59, 58-66. doi:10.1016/j.euromechsol.2016.03.008
Peer reviewed vérifié par ORBi

Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (05 July 2016). Study of the functionalization of electron beam melting part through machining [Paper presentation]. 3rd Researcher's Day of the Materials Research Institute, University of Mons, Belgium.

Leroy, C., Rivière, E., & Filippi, E. (05 July 2016). Trajectoires curvilinéaires optimisées en longueur pour l'usinage de cavité avec îlot [Poster presentation]. 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (05 July 2016). CEL Modelling of Ti6Al4V Orthogonal Cutting [Poster presentation]. 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (05 July 2016). Hybrid machining on the Y-TZP ceramic: Combination of the milling and the laser machining [Poster presentation]. 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.

Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (2016). Characterization of electron beam melting process (EBM) : Capability approach. Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing.
Peer reviewed

Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 June 2016). Characterization of electron beam melting process (EBM) : Capability approach [Paper presentation]. ASPE/euspen 2016 Summer Topical Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing.

Leroy, C., Rivière, E., & Filippi, E. (2016). Généralisation de la méthode de Bieterman aux cavités 2D1/2 avec îlots [Paper presentation]. MUGV 2016, Tours, France.

Leroy, C., Rivière, E., & Filippi, E. (09 June 2016). Généralisation de la méthode de Bieterman aux cavités 2D1/2 avec îlots [Paper presentation]. MUGV 2016, Tours, France.

Ozcan, A., Rivière, E., Filippi, E., Verlinden, O., & Huynh, H. (2016). Modélisation du mouvement dynamique d'une machine-outil à l'aide d'un logiciel de simulation dynamique multi-corps - Première approche [Paper presentation]. MUGV 2016, Tours, France.

Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., Petit, F., & Preux, N. (2016). Development of the hybrid sequential machining: laser machining and milling. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016.
Peer reviewed

Demarbaix, A., Rivière, E., Ducobu, F., Filippi, E., Petit, F., & Preux, N. (30 May 2016). Development of the hybrid sequential machining: Laser machining and milling [Poster presentation]. 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016.

Verlinden, O., Huynh, H., & Rivière, E. (29 May 2016). Modelling of flexible bodies with minimal coordinates by means of the co-rotational formulation [Paper presentation]. The Joint International Conference on Multibody System Dynamics, IMSD, Montréal, Canada.

Huynh, H., Rivière, E., & Verlinden, O. (29 May 2016). Integration of machining simulation within a multibody framework: application to milling [Paper presentation]. The Joint International Conference on Multibody System Dynamics, IMSD, Montréal, Canada.

Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 May 2016). Functionalization of Electron beam melting parts by Machining [Paper presentation]. workshop sur l'additive manufacturing, ULB (Bruxelles), Belgium.

Huynh, H., Rivière, E., & Verlinden, O. (18 May 2016). Robotic machining: Development & validation of a robotic machining numerical model in order to optimize the cutting parameters [Poster presentation]. 9ème édition de la Matinée des Chercheurs 2016 (MdC2016), Valenciennes, France.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (18 May 2016). Concept of the hybrid machining: the laser machining and milling [Poster presentation]. Matinée des chercheurs, Université de Valenciennes et du Hainaut-Cambrésis, France.

Dolimont, A., Rivière, E., & Filippi, E. (18 May 2016). Study of the functionalization of electron beam melting part through machining [Poster presentation]. Matinée des chercheurs, Valenciennes, Université de Valenciennes et du Hainaut Cambrésis, France.

Rivière, E., Huynh, H., & Verlinden, O. (17 May 2016). Time step selection for the dynamic simulation of milling operations [Paper presentation]. International conference on COmputational methods in Manufacturing Processes (ICOMP), Liège, Belgium.

Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 April 2016). Effect of HIPping (Hot Isostatic Pressing) on electron beam melting Ti6Al4V parts after machining [Paper presentation]. 19th International ESAFORM Conference on Material Forming, ESAFORM 2016.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2016). Ma thèse en 180 secondes: L'usinage hybride : Combinaison de deux procédés de fabrication par enlèvement de matière.

Ducobu, F., Rivière, E., & Filippi, E. (01 March 2016). Material constitutive model and chip separation criterion influence on the modeling of Ti6Al4V machining with experimental validation in strictly orthogonal cutting condition. International Journal of Mechanical Sciences, 107, 136-149. doi:10.1016/j.ijmecsci.2016.01.008
Peer reviewed vérifié par ORBi

Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (31 January 2016). Characterisation of electron beam melting process on Ti6Al4V in order to guide finishing operation. International Journal of Rapid Manufacturing, 5 (3/4).
Peer reviewed

Dolimont, A., Michotte, S., De Formanoir, C., Rivière, E., Ducobu, F., Godet, S., & Filippi, E. (02 December 2015). L'impact des traitements thermiques et CIC sur la microstructure et les propriétés mécaniques des pièces en TA6V par EBM et contrôle géométrique du procédé pour guider l'usinage [Paper presentation]. A3TS: POST FABRICATION ADDITIVE : QUELS TRAITEMENTS DE FINITION ?, UTBM Sevenans (90), France.

Ducobu, F., Rivière, E., & Filippi, E. (27 July 2015). Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine. International Journal of Material Forming, 8 (3), 455-468. doi:10.1007/s12289-014-1189-4
Peer reviewed vérifié par ORBi

Dolimont, A., Rivière, E., & Filippi, E. (30 June 2015). Metrological analysis of electron beam melting process (EBM) [Poster presentation]. 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.

Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (30 June 2015). A first step to study numerically the tool wear influence in Ti6Al4V orthogonal cutting [Poster presentation]. 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (30 June 2015). LAMAC: Usinage laser sur de la céramique « crue » [Poster presentation]. The 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.

Rivière, E., Dolimont, A., Leroy, C., & Wattiaux, D. (2015). Géométries et communication graphique - exercices.

Rivière, E. (2015). Topographie : Notes de cours.

Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (11 June 2015). Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining. Procedia CIRP, 31, 124-129. doi:10.1016/j.procir.2015.03.056
Peer reviewed vérifié par ORBi

Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 June 2015). Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining [Paper presentation]. 15th CIRP Conference on Modelling of Machining Operations, Karlsruhe, Germany.

Ducobu, F., & Rivière, E. (26 May 2015). On going topics in modelling of machining [Paper presentation]. Les nouvelles tendances et techniques d'usinage pour le secteur aérospatial, Wavre, Belgium.

Rivière, E., Letot, C., Ducobu, F., & Filippi, E. (17 April 2015). Uncertainty management of cutting forces parameters and its effects on machining stability. Key Engineering Materials, 651-653, 1165-1170. doi:10.4028/www.scientific.net/KEM.651-653.116
Peer reviewed vérifié par ORBi

Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (15 April 2015). Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling. Key Engineering Materials, 651-653, 1197-1203. doi:10.4028/www.scientific.net/KEM.651-653.1197
Peer reviewed vérifié par ORBi

Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 April 2015). Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling [Paper presentation]. Esaform 2015, Graz, Austria.

Ducobu, F., Rivière, E., & Filippi, E. (01 April 2015). On the introduction of adaptive mass scaling in a finite element model of Ti6Al4V orthogonal cutting. Simulation Modelling Practice and Theory, 53, 1-14. doi:10.1016/j.simpat.2015.02.003
Peer reviewed vérifié par ORBi

Rivière, E., Letot, C., Ducobu, F., & Filippi, E. (01 April 2015). Uncertainty management of cutting forces parameters and its effects on machining stability [Paper presentation]. 18th International ESAFORM Conference on Material Forming, ESAFORM 2015.

Leroy, C., Rivière, E., & Filippi, E. (10 March 2015). Résoudre l'équation de Poisson pour générer des trajectoires d'usinage fluides. Cas des cavités avec îlot [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2015). Les trajectoires en usinage laser: Modèle thermique pour controller le taux de matière ablaté.

Dolimont, A., Rivière, E., & Filippi, E. (10 March 2015). Characterization of electron beam melting process (EBM) in order to enhance finishing operations [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.

Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (10 March 2015). A numerical model to study the tool wear influence in Ti6Al4V orthogonal cutting [Poster presentation]. Matinée des chercheurs (MDC2015), Mons, Belgium.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (10 March 2015). Comparaison de deux technologies de fabrication dans la céramique dentaire : usinage laser et micro-fraisage [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.

Boulvain, J., VanParys, L., Rivière, E., Ducobu, F., & Legrain, H. (02 March 2015). Improvement of underground investigation techniques: a soil model coupling Drucker-Prager & ALE [Poster presentation]. Matinée des chercheurs (MDC2015), Mons, Belgium.

Letot, C., Dehombreux, P., Rivière, E., Fleurquin, G., & Lesage, A. (01 March 2015). A degradation model for maintenance improvement in respect of cost and availability. Journal of Quality in Maintenance Engineering, 21 (1), 55 - 69. doi:10.1108/JQME-01-2013-0001
Peer reviewed vérifié par ORBi

Leroy, C., Rivière, E., & Filippi, E. (16 October 2014). Trajectoires curvilinéaires pour l'usinage de cavités avec îlot: une première approche [Paper presentation]. MUGV 2014, Clermont-Ferrand, France.

Leroy, C., Rivière, E., & Filippi, E. (2014). TRAJECTOIRES CURVILINEAIRES POUR L'USINAGE DE CAVITES AVEC ÎLOT: UNE PREMIERE APPROCHE [Paper presentation]. MUGV 2014, Clermont-Ferrand, France.

Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., Petit, F., & Preux, N. (2014). TRAJECTORIES IN LASER MACHINING CERAMICS: THERMAL MODEL TO CONTROL MATERIAL REMOVE RATE [Paper presentation]. Eleventh International Conference on High Speed Machining, Prague, Czechia.

Dolimont, A., Rivière, E., & Filippi, E. (2014). ANALYSIS OF MACHINING CONFIGURATIONS WITH BALL-END MILLS IN ORDER TO FINISH PARTS MADE BY EBM AND COMPARISON WITH NUMERICAL MODEL. Proceedings of the eleventh international conference on high speed machining (HSM 2014).

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (02 July 2014). Modèle thermique par éléments finis de différentes trajectoires en usinage laser [Poster presentation]. 1st Researcher's Day of the Materials Research Institute, Mons, Belgium.

Dolimont, A., Rivière, E., & Filippi, E. (02 July 2014). Analysis of machining configurations with ball-end mills in order to finish parts made by EBM and comparison with numerical model [Poster presentation]. 1st Researcher's Day of the Materials Research Institute, Mons, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (02 July 2014). Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine [Poster presentation]. 1st Research Day of the Materials Research Institute, Mons, Belgium.

Leroy, C., Rivière, E., & Filippi, E. (01 July 2014). Trajectoires curvilinéaires pour l'usinage de cavités avec îlot: une première approche [Poster presentation]. Journée des chercheurs de l'Institut Matériaux, Mons, Belgium.

Rivière, E., Filippi, E., & Dehombreux, P. (2014). Construction des machines et procédés de fabrication : Notes de cours.

Ducobu, F., Rivière, E., & Filippi, E. (01 April 2014). Numerical contribution to the comprehension of saw-toothed Ti6Al4V chip formation in orthogonal cutting. International Journal of Mechanical Sciences, 81, 77-87. doi:10.1016/j.ijmecsci.2014.02.017
Peer reviewed vérifié par ORBi

Ducobu, F., Rivière, E., & Filippi, E. (26 September 2013). Experimental contribution to the comprehension of Ti6Al4V saw-toothed chip formation in orthogonal cutting [Poster presentation]. Tenth International Conference on High Speed Machining, Darmstadt, Germany.

Ducobu, F., Rivière, E., & Filippi, E. (25 July 2013). Chip Formation in Micro-cutting. Journal of Mechanics Engineering and Automation, 3, 441-448.
Peer reviewed

Ducobu, F., Rivière, E., & Filippi, E. (13 June 2013). Influence of the Material Behavior Law and Damage Value on the Results of an Orthogonal Cutting Finite Element Model of Ti6Al4V. Procedia CIRP, 8, 378-383. doi:10.1016/j.procir.2013.06.120
Peer reviewed vérifié par ORBi

Ducobu, F., Rivière, E., & Filippi, E. (01 June 2013). Influence of the Material Behavior Law and Damage Value on the Results of an Orthogonal Cutting Finite Element Model of Ti6Al4V [Paper presentation]. CIRP Conference on Modeling of Machining Operations, Turin, Italy.

Rivière, E., Filippi, E., & Dehombreux, P. (21 April 2013). Numerical simulation of machining operations on flexible parts. Key Engineering Materials, 554-557, 1984-1991. doi:10.4028/www.scientific.net/KEM.554-557.1984
Peer reviewed vérifié par ORBi

Ducobu, F., Rivière, E., & Filippi, E. (18 April 2013). Approche mésoscopique pour l'étude numérique et expérimentale des mécanismes de coupe macroscopique et microscopique [Paper presentation]. Journée thématique: 'L'usinage des matériaux: de la compréhension des mécanismes aux applications', Mons, Belgium.

Rivière, E., & Filippi, E. (18 April 2013). Approche macroscopique de l'usinage des métaux : techniques expérimentales et apport de la simulation [Paper presentation]. Journée thématique: 'L'usinage des matériaux: de la compréhension des mécanismes aux applications', Mons, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (26 March 2013). A Lagrangian Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V [Paper presentation]. SIMULIA Academic Seminar 2013, Mons, Belgium.

Leroy, C., Rivière, E., & Filippi, E. (12 March 2013). Optimisation de l'usinage de cavités par fraisage [Poster presentation]. Matinée des chercheurs ( MDC'2013), Mons, Belgium.

Dolimont, A., Rivière, E., & Filippi, E. (12 March 2013). Finition des pièces mécaniques à la sortie d'une production additive [Poster presentation]. 7ème édition de la Matinée de Chercheurs, Mons, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (06 March 2013). Experimental contribution to the comprehension of Ti6Al4V saw-toothed chip formation mechanisms in orthogonal cutting [Poster presentation]. Matinée des Chercheurs 2013, Mons, Belgium.

Rivière, E., Brunée, N., & Losseau, M. (12 June 2012). La coopération au développement par la pratique. Polytech.News, 47.

Avau, J., & Rivière, E. (12 June 2012). Education et solidarité: ingénieurs et citoyens, ils passent à l'action. Polytech.News, 47.

Ducobu, F., Rivière, E., & Filippi, E. (2012). Chip Formation in Micro-cutting [Paper presentation]. 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (01 May 2012). Chip Formation in Microcutting [Paper presentation]. 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (15 March 2012). Dynamic simulation of the micro-milling process including minimum chip thickness. Key Engineering Materials, 504-506, 1269-1274. doi:10.4028/www.scientific.net/KEM.504-506.1269
Peer reviewed vérifié par ORBi

Ducobu, F., Rivière, E., & Filippi, E. (14 March 2012). Dynamic simulation of the micro-milling process including minimum chip thickness [Paper presentation]. 15th Conference of the European Scientific Association on Material Forming, ESAFORM 2012.

Vanderstappen, X., & Rivière, E. (22 November 2011). Le projet Icare. Polytech.News, 46.

Letot, C., Dehombreux, P., Fleurquin, G., & Rivière, E. (2011). Roller bearings lifetime under different load conditions by a semi-Markovian approach [Paper presentation]. 41st ESReDA Conference Advances in Reliability-based Maintenance Policies, La Rochelle, France.

Tam, E., El Hiki, L., Dumont, E., & Rivière, E. (10 June 2011). Pôles d'attraction internationale. Polytech.News, 44.

Ducobu, F., Rivière, E., & Filippi, E. (01 June 2011). A Lagrangian FEM Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V [Paper presentation]. CIRP conference on modelling of machining operations, Sintra, Portugal.

Ducobu, F., Rivière, E., & Filippi, E. (12 May 2011). A Lagrangian FEM Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V. Advanced Materials Research, 223, 3-11. doi:10.4028/www.scientific.net/AMR.223.3
Peer reviewed

Rivière, E., Filippi, E., & Dehombreux, P. (2011). Experimental investigation of parameter-dependent analytical cutting force models for the simulation of the milling process [Paper presentation]. Esaform 2011, Queen's University, Belfast, Unknown/unspecified. doi:10.1063/1.3589577

Rivière, E., Filippi, E., & Dehombreux, P. (07 April 2011). Experimental study of parameter-dependent analytical cutting force model [Paper presentation]. Matinée des chercheurs, UMONS, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (22 March 2011). Simulation de la formation d'un copeau dentelé de Ti6Al4V en coupe orthogonale par la méthode aux éléments finis [Poster presentation]. 6ème édition de la Matinée des Chercheurs (MDC 2011), Mons, Belgium.

Rivière, E. (15 March 2011). Sixième édition de la matinée des chercheurs. Polytech.News, 45.

Ducobu, F., Rivière, E., & Filippi, E. (2010). An ALE Model to Study the Depth of Cut Influence on Chip Formation in Orthogonal Cutting [Paper presentation]. Eighth International Conference on High Speed Machining, Metz, France.

Ducobu, F., Rivière, E., & Filippi, E. (01 December 2010). An ALE Model to Study the Depth of Cut Influence on Chip Formation in Orthogonal Cutting [Paper presentation]. Eighth International Conference on High Speed Machining, Metz, France.

Rivière, E. (11 June 2010). Coopération au développement : itinéraire d'un chercheur congolais. Polytech.News, 44.

Ducobu, F., Rivière, E., & Filippi, E. (15 March 2010). Orthogonal Cutting Simulations with Abaqus/Explicit - Current results [Paper presentation]. Simulia Academic Seminar 2010, Leuven, Belgium.

Rivière, E. (10 March 2010). Notre identité au sein de l'UMONS : entretien avec Monsieur le Recteur Calogero Conti. Polytech.News, 43.

Ducobu, F., Filippi, E., & Rivière, E. (17 February 2010). Simulation de la coupe orthogonale du Ti6Al4V par la méthode aux éléments finis [Poster presentation]. Matinée des Chercheurs, Bruxelles, Belgium.

Fleurquin, G., Lesenne, J.-M., Dehombreux, P., & Rivière, E. (2009). Optimisation de la maintenance de lignes continues de production [Paper presentation]. PErformances et Nouvelles TechnolOgies en Maintenance, Autrans, France.

Ducobu, F., Rivière, E., & Filippi, E. (31 August 2009). Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale [Paper presentation]. 19ème Congrès Français de Mécanique, Marseille, France.

Ducobu, F., Filippi, E., & Rivière, E. (2009). Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale [Paper presentation]. Congrès Français de mécanique, Marseille, France.

Ducobu, F., Filippi, E., & Rivière, E. (2009). Investigations on chip formation in micro-milling. Laser Metrology and Machine Performance IX - 9th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2009, 327-336.
Peer reviewed

Ducobu, F., Filippi, E., & Rivière, E. (30 June 2009). Investigations on chip formation in micro-milling [Paper presentation]. International Conference and Exhibition on Laser metrology, machine tool, CMM and robotic performance (LAMDAMAP 2009), Teddington, United Kingdom.

Ducobu, F., Filippi, E., & Rivière, E. (2009). Chip formation in micro-milling [Paper presentation]. National Congress of Theoretical and Applied Mechanics, VUB, Brussels, Belgium.

Ducobu, F., Filippi, E., & Rivière, E. (2009). Chip Formation and Minimum Chip Thickness in Micro-milling [Paper presentation]. CIRP conference on modelling of machining operations, San Sebastian, Spain.

Ducobu, F., Filippi, E., & Rivière, E. (01 May 2009). Chip Formation in Micromilling [Paper presentation]. 8th National Congress on Theoretical and Applied Mechanics, Bruxelles, Belgium.

Ducobu, F., Filippi, E., & Rivière, E. (01 May 2009). Chip Formation and Minimum Chip Thickness in Micro-milling [Poster presentation]. 12th CIRP conference on modelling of machining operations, San Sebastian, Spain.

Rivière, E., Filippi, E., & Dehombreux, P. (15 April 2009). Identification de modèles d'efforts de coupe en fraisage [Poster presentation]. Lab' insight, Louvain-la-Neuve, Belgium.

Ducobu, F., Filippi, E., & Rivière, E. (17 March 2009). Chip Formation and Minimum Chip Thickness in Micro-milling [Poster presentation]. Matinée des chercheurs 2009, Mons, Belgium.

Rivière, E., & Filippi, E. (19 January 2009). Mechanistic cutting force model parameters evaluation in milling taking cutter radial runout into account. International Journal of Advanced Manufacturing Technology, 45 (1-2), 8-15. doi:10.1007/s00170-009-1943-9
Peer reviewed vérifié par ORBi

Ducobu, F., Filippi, E., & Rivière, E. (05 November 2008). Phénomènes de coupe en micro-fraisage par enlèvement de copeaux [Paper presentation]. Les thématiques de recherche du Pôle Matériaux en usinage par outils de coupe, Mons, Belgium.

Rivière, E., Barboza, J., Filippi, E., & D'Alvise, L. (2008). Cutting forces evaluation in milling using an analytical finite element mixed approach [Paper presentation]. 11th CIRP conference on modelling of machining operations, Gaithersburgh, United States.

Ducobu, F., Filippi, E., & Rivière, E. (26 February 2008). Etude du phénomène de coupe en micro-fraisage par enlèvement de copeaux [Poster presentation]. Matinée des Chercheurs 2008, Bruxelles, Belgium.

Rivière, E., de Arizon, J., Filippi, E., & Dehombreux, P. (2007). Cutting forces parameters evaluation in milling using genetic algorithm [Paper presentation]. 10th CIRP International Workshop on Modeling of Machining Operations, Scilla, Reggio Calabria, Italy.

Rivière, E. (13 March 2007). Forces, vibrations and roughness prediction in milling using dynamic simulation [Poster presentation]. Matinée des chercheurs 2009, Mons, Belgium.

Rivière, E., Filippi, E., & Dehombreux, P. (12 March 2007). Etude et simulation des procédés d'usinage à grande vitesse [Poster presentation]. Matinée de Chercheurs de la Faculté Polytechnique de Mons, Mons, Belgium.

Rivière, E. (2007). Etude et simulation de procédés de fraisage grande vitesse : stabilité, efforts de coupe, états de surface [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/34551

Rivière, E., Filippi, E., & Dehombreux, P. (12 February 2007). Inverse method for cutting forces parameters evaluation. Engineering Mechanics: Journal for Theoretical and Applied Mechanics, 14 (5), 1-13.
Peer reviewed

Rivière, E., Filippi, E., & Dehombreux, P. (01 January 2007). Chatter prediction using dynamic simulation. International Review of Mechanical Engineering, 1 (1), 78-86.
Peer reviewed vérifié par ORBi

Rivière, E., Stalon, V., Vandenabeele, O., Filippi, E., & Dehombreux, P. (2006). Chatter detection using a microphone [Paper presentation]. NCTAM 2006 (mai), .

Rivière, E., Filippi, E., & Dehombreux, P. (2006). Forces, vibrations and roughness prediction in milling using dynamic simulation [Paper presentation]. NCTAM 2006 (mai), .

Rivière, E., Filippi, E., & Dehombreux, P. (16 May 2006). Forces, vibrations and roughness prediction in milling using dynamic simulation [Paper presentation]. 7th National Congress on theoretical and applied Mechanics (NCTAM 2006), Mons, Belgium.

Rivière, E., Stalon, V., Vandenabeele, O., Filippi, E., & Dehombreux, P. (16 May 2006). Chatter detection using a microphone [Paper presentation]. 7th National Congress on theoretical and applied Mechanics (NCTAM 2006), Mons, Belgium.

Rivière, E., Filippi, E., & Dehombreux, P. (2006). Forces, vibrations and roughness prediction in milling using dynamic simulation [Paper presentation]. Cinquième Conférence Internationale sur l'usinage à grande vitesse (HSM 2006), Metz, France.

Contacter ORBi UMONS