Profil

Vitry Véronique

Université de Mons - UMONS > Faculté Polytechnique > Service de Métallurgie

Université de Mons - UMONS > Faculté Polytechnique > Métallurgie

ORCID
0000-0002-9155-7271
Principaux co-auteurs référencés
DELAUNOIS, Fabienne  (184)
Bonin, Luiza  (63)
STANCIU, Victor Ioan  (49)
MEGRET, Alexandre  (35)
YUNACTI, Muslum  (21)
Principaux mots-clés référencés
Materials Chemistry (8); SPS (6); Surfaces and Interfaces (6); Surfaces, Coatings and Films (6); cobalt (4);
Principaux centres et unités de recherche référencés
CRIM - Ingénierie des matériaux (221)
AGIF - Algèbre, Géométrie et Interactions fondamentales (1)
URBAINE - Urbanisation Revitalisation Bâtiment Architecture Innovations Espaces (1)
Principales disciplines référencées
Science des matériaux & ingénierie (228)
Chimie (133)
Ingénierie mécanique (68)
Physique (54)
Géologie, ingénierie du pétrole & des mines (25)

La plus téléchargée
189 téléchargements
Bonin, L., Vitry, V., & Delaunois, F. (15 November 2020). Inorganic salts stabilizers effect in electroless nickel-boron plating: Stabilization mechanism and microstructure modification. Surface and Coatings Technology, 401. https://hdl.handle.net/20.500.12907/24343

La plus citée

101 citations (Scopus®)

Vitry, V., Delaunois, F., & Dumortier, C. (01 April 2008). Mechanical properties and scratch test resistance or nickel-boron coated aluminium alloy after heat treatments. Surface and Coatings Technology, 202 (14), 3316-3324. https://hdl.handle.net/20.500.12907/35307

Les plus significatives

Konate, F., Ancia, P., Soma, F., Bougouma, M., Buess-Herman, C., Yonli, A., & Vitry, V. (16 December 2021). Waste electrical and electronic equipments as urban mines in Burkina Faso: Characterization and release of metal particles. Waste Management, 139, 17-24.
Peer reviewed vérifié par ORBi

Vitry, V., Hastir, J., Mégret, A., Yazdani, S., Yunacti, M., & Bonin, L. (24 November 2021). Recent advances in electroless nickel‑boron coatings. Surface and Coatings Technology, 429.
Peer reviewed vérifié par ORBi

Yunacti, M., Vitry, V., Mégret, A., Montagne, A., & Staia, M. H. (2021). Characterization of Electroless Nickel-Boron Deposit from Optimized Stabilizer-Free Bath. Coatings.
Peer reviewed vérifié par ORBi

Bonin, L., Vitry, V., & Delaunois, F. (15 November 2020). Inorganic salts stabilizers effect in electroless nickel-boron plating: Stabilization mechanism and microstructure modification. Surface and Coatings Technology, 401.
Peer reviewed vérifié par ORBi

Vitry, V., Sens, A., Kanta, A. F., & Delaunois, F. (01 November 2012). Experimental study on the formation and growth of electroless nickel-boron coatings from borohydride-reduced bath on mild steel. Applied Surface Science, 263, 640-647.
Peer reviewed vérifié par ORBi


Mégret, A., Vitry, V., & Delaunois, F. (06 February 2024). Study Of Niobium Carbide As Grain Growth Inhibitor In Cemented Tungsten Carbides [Poster presentation]. 18th European Inter-Regional Conference on Ceramics.
Peer reviewed

Vitry, V. (2023). Le laboratoire de métallurgie de l'université de Mons présente un traitement de surface alternatif au chromage dur. France: IPD.

Yunacti, M., Vitry, V., Montagne, A., & Staia, M. H. (December 2023). Replacing Toxic Hard Chrome Coatings: Exploring the Tribocorrosion Behaviour of Electroless Nickel-Boron Coatings. Coatings, 13 (12), 2046. doi:10.3390/coatings13122046
Peer reviewed vérifié par ORBi

Vitry, V. (December 2023). Les revêtements chimiques de nickel-bore, mécanismes, propriétés, applications [Paper presentation]. Projection thermique 2023, Pau, France.

Mégret, A., Rodriguez, P., Broeckmann, C., Vitry, V., & Delaunois, F. (2023). Influence of the amount of recycled cemented carbide powder on the mechanical properties of WC-Co parts sintered by unconventional technologies. Euro PM2023 Congress Proceedings.
Peer reviewed

Yazdani, S., & Vitry, V. (October 2023). Optimization of electroless Ni-B-nanodiamond composite coating corrosion resistance and deposition rate [Paper presentation]. IMAT 2023, Detroit, United States.
Editorial reviewed

Yunacti, M., Vitry, V., & Alex Montagne. (20 September 2023). A greener alternative to the hard chrome coating process: lead-free electroless nickel-boron coatings [Paper presentation]. Surface Modification Technologies, Hamburg, Germany.

Sajjadi shourije, S. M. J., Vitry, V., Taghavi Pourian Azar, G., Tasso Guaraldo, T., & Cobley, A. (September 2023). "Using Cu2O nano particles as a novel non-noble metal catalyst for electroless copper plating on textiles " [Poster presentation]. Electrochem 2023, United Kingdom.
Editorial reviewed

Vitry, V. (2023). Trois solutions alternatives pour remplacer le procédé de chromage dur. France: Techniques de l'Ingénieur.

Sahin, K., Vitry, V., Cobley, A., Graves, J., & Taghavi Pourian Azar, G. (September 2023). "Ni-B-based Polyalloy Electrocatalyst Coatings Deposited by MSPVD for Efficient Oxygen Evolution Reaction" [Poster presentation]. Electrochem 2023, Bristol, United Kingdom.
Editorial reviewed

Yunacti, M., Vitry, V., Montagne, A., & Riou, O. (29 August 2023). Tribocorrosion and tribological behavior innovative chrome coating produced by plasma transferred arc [Paper presentation]. Eurocorr 2023.

Yazdani, S., Mesbah, M., & Vitry, V. (12 August 2023). Molecular Dynamics Simulation of the Interaction between Dislocations and Iron–Vanadium Precipitates in Alpha Iron: Effect of Chemical Composition. Crystals, 13 (8), 1247. doi:10.3390/cryst13081247
Peer reviewed vérifié par ORBi

Yazdani, S., Zgorzelak, S., Mégret, A., & Vitry, V. (04 July 2023). Wear Behavior of Ni/Nanodiamond Nanocomposites Electrodeposition Coating [Paper presentation]. Thermec'2023.

Stanciu, V. I., Mégret, A., Vitry, V., & Delaunois, F. (28 June 2023). Investigation about the possibility to make cemented carbide structures by reactive sintering [Paper presentation]. Workshop for Multi-Functional Materials: from Synthesis to Applications, Valencienne, France.

Vitry, V. (08 June 2023). Généralités sur l’aluminium et les alliages légers [Paper presentation]. Journée technique A3TS France-Nord Belgique - PROPRIETES OBTENUES PAR TRAITEMENT THERMIQUE ET/OU TRAITEMENT DE SURFACE DES ALLIAGES D'ALUMINIUM.

Mégret, A., Vitry, V., & Delaunois, F. (07 June 2023). Substitution du cobalt par un alliage nickel-bore dans les carbures cémentés [Paper presentation]. La Métallurgie: quel avenir!, Grenoble, France.

Yazdani, S., Mesbah, M., Dupont, V., & Vitry, V. (June 2023). Microstructure, wear and crack propagation evolution of electrodeposited nickel-nano diamond composite coatings: Molecular dynamic modeling and experimental study. Surface and Coatings Technology, 462, 129500. doi:10.1016/j.surfcoat.2023.129500
Peer reviewed vérifié par ORBi

Yazdani, S., & Vitry, V. (30 May 2023). Effect of nanodiamonds concentration on the deposition mechanism of electroless Ni-B-nanodiamond composite coatings [Paper presentation]. ECHT 2023 - European Conference on Heat Treatment, Gênes, Italy.
Editorial reviewed

Akbarzadeh, S., Khalid, H. A., Vitry, V., & Olivier, M.-G. (22 May 2023). Improvement of corrosion and mechanical properties of plasma electrolytic oxidation (PEO) layer applied on AA2024 by sealing with different sol-gel coatings [Paper presentation]. Aluminium Surface Science & Technology Symposium, stockholm, Sweden.
Peer reviewed

Khalid, H. A., Akbarzadeh, S., Paint, Y., Vitry, V., & Olivier, M. (05 May 2023). Comparison of Tribological Characteristics of AA2024 Coated by Plasma Electrolytic Oxidation (PEO) Sealed by Different sol–gel Layers. Coatings, 13 (5), 871. doi:10.3390/coatings13050871
Peer reviewed vérifié par ORBi

Vitry, V. (08 April 2023). Making electroless nickel-boron coatings more sustainable and stronger [Paper presentation]. International Conference on Women in Electrochemistry.
Editorial reviewed

Stanciu, V. I., Erauw, J.-P., Boilet, L., Vitry, V., & Delaunois, F. (April 2023). WC-Co composite made with doped binder: The effect of binder proportion on microstructure and mechanical properties. International Journal of Refractory Metals and Hard Materials, 112, 106161. doi:10.1016/j.ijrmhm.2023.106161
Peer reviewed vérifié par ORBi

Yazdani, S., & Vitry, V. (15 March 2023). Using Molecular Dynamic Simulation to Understand the Deformation Mechanism in Cu, Ni, and Equimolar Cu-Ni Polycrystalline Alloys. Alloys, 2 (1), 77-88. doi:10.3390/alloys2010005
Peer reviewed

Sajjadi shourije, S. M. J., Pouyan Dehghan, Mohammad Ebrahim Bahrololoom, Andrew J. Cobley, Vitry, V., Golnaz Taghavi Pourian Azar, Hesam Kamyab, & Mesbah, M. (March 2023). Using fish scales as a new biosorbent for adsorption of nickel and copper ions from wastewater and investigating the effects of electric and magnetic fields on the adsorption process. Chemosphere, 317, 137829. doi:10.1016/j.chemosphere.2023.137829
Peer reviewed vérifié par ORBi

Yazdani, S., Prince, L., & Vitry, V. (21 February 2023). Optimization of electroless Ni–B-nanodiamond coating corrosion resistance and understanding the nanodiamonds role on pitting corrosion behavior using shot noise theory and molecular dynamic simulation. Diamond and Related Materials, 134, 109793. doi:10.1016/j.diamond.2023.109793
Peer reviewed vérifié par ORBi

Mégret, A., Prince, L., Olivier, M.-G., & Vitry, V. (16 February 2023). Tribo- and Tribocorrosion Properties of Magnesium AZ31 Alloy. Coatings, 13 (2), 448. doi:10.3390/coatings13020448
Peer reviewed vérifié par ORBi

Mégret, A., Vitry, V., & Delaunois, F. (February 2023). The effect of boron-doped cobalt additions on mechanical properties of a recycled WC-Co powder. International Journal of Refractory Metals and Hard Materials, 111, 106098. doi:10.1016/j.ijrmhm.2022.106098
Peer reviewed vérifié par ORBi

Yazdani, S., Chapon, P., Dupont, V., & VITRY, V. (2023). Role of CTAB surfactant on electroless Ni–B deposition and its mechanical and corrosion behaviour. Surface Engineering, 1-11. doi:10.1080/02670844.2022.2162564
Peer reviewed vérifié par ORBi

Yazdani, S., & Vitry, V. (2023). Using electrochemical noise technique to understand the pitting corrosion behavior of Ni-B-ND composite coatings [Paper presentation]. Eurocorr 2023.
Peer reviewed

Sajjadi shourije, S. M. J., Cobley, A., Taghavi Pourian Azar, G., & Vitry, V. (January 2023). Investigating the use of MnO2 as an activator for nickel-boron electroless deposition of polymeric materials [Poster presentation]. Journée des doctorants de l'école doctorale MaIN, Namur, Belgium.

Yazdani, S., & Vitry, V. (2023). Effect of nanodiamond on the localized and pitting corrosion behavior of electroless Ni-B-nanodiamond coatings [Paper presentation]. 74th Annual Meeting of the International Society of Electrochemistry.
Peer reviewed

Yazdani, S., & Vitry, V. (2023). Effect of nanodiamonds on the scratch resistance and toughness of electroless Ni-B-nanodiamond coating [Paper presentation]. 35th Conference on Surface Modification Technologies.
Peer reviewed

Vitry, V. (2023). Interview dans le cadre d'un projet sur les femmes scientifiques. Bruxelles, Belgium: Nighthawks production.

Vitry, V.* , Mégret, A., Khalid, H. A., Staia, M. H., Montagne, A., & Yunacti, M.*. (20 December 2022). Selection of New Heat Treatment Conditions for Novel Electroless Nickel-Boron Deposits and Characterization of Heat-Treated Coatings. Coatings, 13 (1), 1. doi:10.3390/coatings13010001
Peer reviewed vérifié par ORBi

Vitry, V. (2022). Nickelage chimique, mécanismes et nouveaux développements [Paper presentation]. Journée technique A3TS France-Nord Belgique - le nickel dans les traitements de surface, LIège, Belgium.

Mégret, A., Vitry, V., & Delaunois, F. (26 October 2022). Etudes thermodynamique et mécanique de nouveaux liants pour les carbures de tungstène [Paper presentation]. Matériaux 2022, Lille, France.
Editorial reviewed

Yunacti, M., Vitry, V., Montagne, A., & staia mariana henriette. (05 October 2022). Tribocorrosion properties of electroless nickel-boron coatings from stabilizer-free bath [Paper presentation]. International Material and Metallurgical Engineering, Istanbul, Turkey.

Vitry, V. (October 2022). Lixiviation des métaux contenus dans les DEEE par des mélanges eutectiques profonds [Poster presentation]. Matériaux 2022, Lille, France.

Yunacti, M., Mégret, A., Montagne, A., & Vitry, V. (October 2022). Effets des traitements thermiques sur les propriétés mécaniques et tribologiques de revêtements chimiques nickel-bore innovants [Paper presentation]. Matériaux 2022, Lille, France.

Vitry, V. (2022). La sidérurgie Wallonne - Passé, présent, futur [Paper presentation]. réunion mensuelle de septembre - Rotary de Mons, Mons, Belgium.

Vitry, V., Papanaoum, M., Mégret, A., & Delaunois, F. (13 September 2022). Even failure analysts can blow things up, it seems [Paper presentation]. IMAT 2022, New Orleans, United States - Louisiana.

Gratton, G., & Vitry, V. (13 September 2022). Unexpected failures modes, or how aeroplanes can bite in very mysterious ways [Paper presentation]. IMAT 2022, New Orleans, United States - Louisiana.

Delaunois, F., Mégret, A., & Vitry, V. (13 September 2022). Teaching good practices in Failure Analysis to students to help them react efficiently to damage in their professional career [Paper presentation]. IMAT2022, New Orleans, United States.
Editorial reviewed

Yunacti, M., Vitry, V., & Montagne, A. (06 September 2022). Electroless nickel-boron coatings thickness measurement by means of Calo tester [Paper presentation]. Mardi des Chercheurs 11éme edition, mons, Belgium.

Mégret, A., Leclef, A., Vitry, V., & Delaunois, F. (06 September 2022). Thermodynamic and mechanical investigations of novel binders for cemented carbides [Poster presentation]. Mardi des Chercheurs 2022 (MdC2022), Mons, Belgium.

Yazdani, S., & Vitry, V. (September 2022). Effect of nanodiamonds on mechanical properties of electroless Ni-B-nanodiamond coating [Paper presentation]. Mardi des chercheurs 2022.

Akbarzadeh, S., Vitry, V., & Olivier, M.-G. (31 August 2022). Smart hybrid coating reinforced with modified clay nano reservoirs for the plasma electrolytic oxidation (PEO) layer on AA2024 [Paper presentation]. EUROCORR2022.
Peer reviewed

Vitry, V., Yunacti, M., & Montagne, A. (30 August 2022). Effect of replenishment process on the properties of electroless nickel-boron deposits from a stabilizer-free bath [Paper presentation]. Eurocorr 2022, Berlin, Germany.

Yazdani, S., & Vitry, V. (August 2022). Comprehensive study on the improving stability of nandodiamonds [Paper presentation]. l'édition 2021 des Chercheurs.

Yunacti, M., Vitry, V., & Montagne alex. (10 June 2022). Les propriétés mécaniques et tribologiques des revêtements du type Chrome VI, NiW électrolytique et revêtements chimique NiB [Paper presentation]. Journée LGCgE (Laboratoire de Génie et géoEnvironnement), Lille, France.

Mégret, A., Vitry, V., & Delaunois, F. (2022). The effect of boron-doped cobalt additions on mechanical properties of a recycled WC-Co powder. Proceeding of 20th Plansee Seminar.

Vitry, V. (2022). Les revêtements de nickel chimique. VOM info, (JUIN), p. 35-36.

Vitry, V. (2022). De l'hydrogène à l'acier vert [Paper presentation]. Assemblée générale de la section montoise de l'AIMs Polytech Mons alumni, Mons, Belgium.

Mégret, A., Vitry, V., & Delaunois, F. (01 April 2022). High-energy ball milling of WC-10Co: Effect of the milling medium and speed on the mechanical properties. International Journal of Refractory Metals and Hard Materials, 104. doi:https://doi.org/10.1016/j.ijrmhm.2021.105774
Peer reviewed vérifié par ORBi

Akbarzadeh, S., Sopchenski, L., Vitry, V., Paint, Y., & Olivier, M.-G. (25 March 2022). Improvement of the corrosion performance of AA2024 alloy by a duplex PEO/clay modified sol-gel nanocomposite coating. Surface and Coatings Technology, 434, 128168. doi:10.1016/j.surfcoat.2022.128168
Peer reviewed vérifié par ORBi

Vitry, V. (19 March 2022). improvements of electroless nickel-boron by heat/thermochemical treatments, duplex coatings and removal of toxic stabilizer [Paper presentation]. VIT-AP University webinar, India.

Domgue kamwa, L. I., Vitry, V., Malingraux, M., & Lhenry-Robert, L. (2022). PRACTICAL APPROACH FOR CHARACTERIZING THE PROJECTION OF STAINLESS-STEEL DROPLETS: VACUUM DECARBURIZATION PLANT. Materials and Manufacturing Processes, 1-9. doi:10.1080/10426914.2022.2157431
Peer reviewed vérifié par ORBi

Yunacti, M., Montagne, A., Staia, M., & Vitry, V. (2022). Tribocorrosion properties of electroless nickel-boron coatings from stabilizer-free bath [Paper presentation]. International Metallurgy & Materials Congress, Turkey.

Konate, F., Ancia, P., Soma, F., Bougouma, M., Buess-Herman, C., Yonli, A., & Vitry, V. (16 December 2021). Waste electrical and electronic equipments as urban mines in Burkina Faso: Characterization and release of metal particles. Waste Management, 139, 17-24.
Peer reviewed vérifié par ORBi

Vitry, V. (2021). Traitements de surfaces : Aperçu général.

Vitry, V., Hastir, J., Mégret, A., Yazdani, S., Yunacti, M., & Bonin, L. (24 November 2021). Recent advances in electroless nickel‑boron coatings. Surface and Coatings Technology, 429.
Peer reviewed vérifié par ORBi

Yunacti, M., Vitry, V., & Montagne, A. (18 November 2021). Progress in the stabilizer-free electroless nickel-boron deposits [Paper presentation]. Parrainage d'AltCtrlTrans project.

Konate, F., Yonli, H. A., Bougouma, M., Buess-Herman, C., & Vitry, V. (15 November 2021). Récupération du cuivre dans les cartes de circuits imprimés par procédé de cémentation [Paper presentation]. Symposium international sur la science et la technologie - SIST 4ème édition 2021, Ouagadougou, Burkina Faso.

Vitry, V., & Voizieux, O. (2021). Comment la sidérurgie belge compte prendre le train de l'acier vert. Trends tendance.

Konate, F., Yonli, H. A., & Vitry, V. (14 October 2021). Copper recovery from printed circuit boards by precipitation process in a deep eutectic solvent [Poster presentation]. Journée Scientifique SRC 2021, Bruxelles, Belgium.

Yunacti, M., Vitry, V., Mégret, A., Montagne, A., & Staia, M. H. (2021). Characterization of Electroless Nickel-Boron Deposit from Optimized Stabilizer-Free Bath. Coatings.
Peer reviewed vérifié par ORBi

Yunacti, M.* , Vitry, V., Mégret, A., & Montagne, A. (23 September 2021). Effect of heat treatment on a novel tin-stabilized electroless nickel-boron coating [Paper presentation]. Virtual Eurocorr, Virtual, Hungary.

Sopchenski Santos, L., Akbarzadeh, S., Touzin, M., Vitry, V., & Olivier, M.-G. (22 September 2021). Investigation of the long-term corrosion protection of sol-gel sealed PEO [Paper presentation]. EUROCORR2021, Virtuel (Budapest), Hungary.
Peer reviewed

Akbarzadeh, S., Sopchenski Santos, L., Vitry, V., & Olivier, M.-G. (22 September 2021). Improvement of the corrosion performance of AA2024 by a duplex PEO/clay modified sol-gel nanocomposite coating [Paper presentation]. EUROCORR2021, Virtuel (Budapest), Hungary.
Peer reviewed

Yunacti, M., & Vitry, V. (15 September 2021). ALTernative au Chrome TRi et hexavaLent pour le secteur du TRANSport et de la TRANSformation (Alt Ctrl Trans) [Paper presentation]. Eurofinish, Brabanthallen, Unknown/unspecified.

Vitry, V., Bonin, L., & Delaunois, F. (14 September 2021). Towards Lead-free electroless nickel-boron plating [Paper presentation]. Internatinal Materials, Applications & Technologies IMAT2021, Saint Louis, Missouri, United States.

Delaunois, F., Mégret, A., & Vitry, V. (13 September 2021). Interest in advanced microscopy for the failure analysis of metallic components [Paper presentation]. Internatinal Materials, Applications & Technologies IMAT2021, Saint Louis, Missouri, United States.

Delaunois, F., Mégret, A., & Vitry, V. (23 June 2021). Failure analysis of metallic components due to improper materials and fabrication method [Paper presentation]. ICEAF VI : Conference of Engineering Against Failure, Virtual, Greece.

Yunacti, M., Mégret, A., Montagne, A., & Vitry, V. (11 June 2021). Corrosion resistance of electroless NiB coatings synthesized in a bath free of stabilizing agent [Paper presentation]. International Metallurgy and Materials congress, Istanbul/Virtual, Turkey.

Vitry, V. (2021). Overview of surface treatments - principles and use.

Delaunois, F., Stanciu, V. I., Erauw, J.-P., & Vitry, V. (01 June 2021). The effect of the proportion of doped binder on the microstructure and properties of WC-Co composites [Paper presentation]. Thermec'2021, Graz, Austria.

Vitry, V., Bonin, L., Yunacti, M., Mégret, A., & Delaunois, F. (01 June 2021). Electroless nickel boron coatings, can it replace hard chrome? [Paper presentation]. Thermec'2021, Graz, Austria.

Khoshnaw, F., Delaunois, F., & Vitry, V. (07 April 2021). Recovery of the microstructural changes of different duplex stainless steel alloys. Multidiscipline Modeling in Materials and Structures, 17 (3), 668-680.
Peer reviewed vérifié par ORBi

Yunacti, M., Vitry, V., Mégret, A., & Montagne, A. (30 March 2021). Selection of the reducing agent concentration in a stabilizer free electroless nickel boron deposit bath [Paper presentation]. Mardi des chercheurs, Valenciennes, France.

Mégret, A., Sibille, T., Vitry, V., & Delaunois, F. (30 March 2021). Study of the stability of electroless cobalt boron baths - E-WC project [Poster presentation]. Mardi des Chercheurs 2021, Valenciennes, France.

Vitry, V. (2021). Comment les redox ont façonné notre monde ? : Histoire de la métallurgie et des techniques.

Jolly, A., Cobley, A., Vitry, V., Wu, L., & Danilova, S. (21 March 2021). Functional Nickel coatings obtained by Electrodeposition and Electroless deposition [Poster presentation]. Mardi des Chercheurs, Virtual Meeting, Unknown/unspecified.

Mégret, A., Vitry, V., & Delaunois, F. (17 March 2021). Study of the Processing of a Recycled WC-Co Powder: Can It Compete with Conventional WC-Co Powders? Journal of Sustainable Metallurgy, 7, 448-458.
Peer reviewed vérifié par ORBi

Yunacti, M., Vitry, V., & Montagne Alex. (2021). Corrosion resistance of electroless nickel-boron coating in a bath exempt from stabilizer [Paper presentation]. Corrosion and Materials Degradation Web Conference.

Konate, F., Vitry, V., & Yonli, H. A. (08 December 2020). Elimination du cuivre dans les cartes de circuits imprimés [Paper presentation]. IIe Journées scientifiques de l'Université de Ouahigouya, Ouahigouya, Burkina Faso.

Bonin, L., Vitry, V., & Delaunois, F. (15 November 2020). Inorganic salts stabilizers effect in electroless nickel-boron plating: Stabilization mechanism and microstructure modification. Surface and Coatings Technology, 401.
Peer reviewed vérifié par ORBi

Vitry, V. (12 October 2020). Collaboration in CLIL: Alloying content and language teachers' efforts in CLIL classes [Paper presentation]. ICHLE Symposium 2020 - TRANSDISCIPLINARY COLLABORATION IN ICLHE AND EMI, Mons, Belgium.

Sopchenski Santos, L., Portier, A., Vitry, V., & Olivier, M.-G. (10 September 2020). Barrier properties of Sol-Gel layer applied on PEO porous coatings for AA2024 corrosion protection [Poster presentation]. Virtual Eurocorr2020, Bruxelles, Belgium.

Yunacti, M., Mégret, A., Montagne, A., & Vitry, V. (07 September 2020). Development and characterization of electroless NiB coatings in a bath free of stabilizing agent [Paper presentation]. Virtual Eurocorr2020, Bruxelles, Belgium.

Vitry, V. (20 August 2020). Electroless plating [Paper presentation]. Metallurgy Around The Globe Conference, Suez (online), Egypt.

Vitry, V. (2020). Sommes-nous toujours à l'âge du fer ?

Bonin, L., Vitry, V., Olivier, M.-G., & Bertolucci Coelho, L. (09 June 2020). Covid-19: effect of disinfection on corrosion of surfaces. Corrosion Engineering, Science and Technology, 55:8, 693-695.
Peer reviewed vérifié par ORBi

Bonin, L., Vitry, V., & Delaunois, F. (30 April 2020). Replacement of Lead stabilizer in electroless Nickel-Boron baths: Synthesis and characterization of coatings from bismuth stabilized bath. Sustainable Materials and Technologies, 23.
Peer reviewed

Stanciu, V. I., Vitry, V., & Delaunois, F. (20 April 2020). Influence of the milling parameters on the sintering behaviour of WC-Co composites. Materials and Manufacturing Processes, 35 (7), 811-816. doi:10.1080/10426914.2020.1743850
Peer reviewed vérifié par ORBi

Vitry, V. (2020). EDITO. A3TS Sciences et techniques.

Vitry, V., Bonin, L., Yunacti, M., Mégret, A., & Delaunois, F. (07 March 2020). Electroless nickel-boron coatings, can it replace hard chrome? [Paper presentation]. SIXTH ASIAN CONFERENCE ON HEAT TREAT AND SURFACE ENGINEERING, Chennai, India.

Vitry, V., Stanciu, V. I., & Delaunois, F. (06 March 2020). Second advice: how failure analysis of metallic components can bring very different results when carried out by different labs, while it should not [Paper presentation]. SIXTH ASIAN CONFERENCE ON HEAT TREAT AND SURFACE ENGINEERING, Chennai, India.

Stanciu, V. I., Vitry, V., & Delaunois, F. (01 February 2020). Study of the milling parameters optimization in the direct carburization of WO3 by mechanical alloying. International Journal of Refractory Metals and Hard Materials, 87, 51-60.
Peer reviewed vérifié par ORBi

Khoshnaw, F., Vitry, V., & Delaunois, F. (05 January 2020). Feasibility Study of Using Thermal Simulator to Observe Metallurgical Aspects of Welded Duplex Stainless Steel. International Journal of Advances in Science Engineering and Technology, 7 (4), 50-55.
Peer reviewed

Vitry, V., & Bonin, L. (2019). Polyalloyed Electroless Nickel Plating. In F. Delaunois, L. Bonin, V. Vitry, S. Begum, A. Cobley, J. Castano, E. Correa, S. K. Das, F. Echeverría, E. García-Lecina, J. Sudagar, A. Salicio Paz, R. Muraliraja, P. Sahoo, A. Selvakumar, T. R. Tamilarasan, S. Udayakumar, M. Urgen, A. A. Zuleta Gil, F. Delaunois (Ed.), L. Bonin (Ed.), ... V. Vitry (Ed.), Electroless Nickel Plating: Fundamentals to applications (pp. 303-330). CRC Press.

Bonin, L., & Vitry, V. (2019). Applications of Electroless Nickel and Practical Aspects. In F. Delaunois, L. Bonin, V. Vitry, S. Begum, A. Cobley, J. Castano, E. Correa, S. K. Das, F. Echeverría, E. García-Lecina, J. Sudagar, A. Salicio Paz, R. Muraliraja, P. Sahoo, A. Selvakumar, T. R. Tamilarasan, S. Udayakumar, M. Urgen, A. A. Zuleta Gil, F. Delaunois (Ed.), L. Bonin (Ed.), ... V. Vitry (Ed.), Electroless Nickel Plating: Fundamentals to applications (pp. 411-424). CRC Press.

Delaunois, F., Bonin, L., Vitry, V., Begum, S., Cobley, A., Castano, J., Correa, E., Das, S. K., Echeverría, F., García-Lecina, E., Sudagar, J., Salicio Paz, A., Muraliraja, R., Sahoo, P., Selvakumar, A., Tamilarasan, T. R., Udayakumar, S., Urgen, M., Zuleta Gil, A. A., ... Vitry, V. (Ed.). (2019). Electroless nickel plating: Fundamentals to applications. CRC Press.

Vitry, V. (2019). Electroless Nickel-Boron-Part B: Posttreatments for Electroless Nickel-Boron. In F. Delaunois, L. Bonin, V. Vitry, S. Begum, A. Cobley, J. Castano, E. Correa, S. K. Das, F. Echeverría, E. García-Lecina, J. Sudagar, A. Salicio Paz, R. Muraliraja, P. Sahoo, A. Selvakumar, T. R. Tamilarasan, S. Udayakumar, M. Urgen, A. A. Zuleta Gil, F. Delaunois (Ed.), L. Bonin (Ed.), ... V. Vitry (Ed.), Electroless Nickel Plating: Fundamentals to applications (pp. 223-262). CRC Press.

Konate, F., Ancia, P., Bougouma, M., Buess-Hermann, C., Vitry, V., & Yonli, H. A. (21 November 2019). Les déchets d'équipements électriques et électroniques (DEEE), Mines urbaines au Burkina Faso- Concentration des métaux [Paper presentation]. Colloque International en Sciences et Technologies (CIST 2019) 1ère édition, Koudougou , Burkina Faso.

Konate, F., Bougouma, M., Buess-Herman, C., Vitry, V., & Yonli, H. A. (14 November 2019). Déchets d'Equipements Électriques et Electroniques (D3E) au BURKINA FASO : Enjeux Environnemental et Economique [Poster presentation]. Symposium international sur la Science et la Technologie (SIST-2019, 3e édition), Ouagadougou, Burkina Faso.

Mégret, A., Vitry, V., & Delaunois, F. (2019). Impact of the Amount of Recycled Cemented Carbide Powder on the Sintering Behavior of WC-Co Parts. Euro PM2019 Congress Proceedings.
Peer reviewed

Delaunois, F., DENIL, E., Marchal, Y., & Vitry, V. (2019). Contribution to the study of portevin-le chatelier effect in aluminum alloy 2024 [Paper presentation]. MS&T2019, Portland, United States - Oregon.

Vitry, V., & Bonin, L. (30 September 2019). Effect of temperature on ultrasound-assisted electroless nickel-boron plating. Ultrasonics Sonochemistry, 56 (327-336).
Peer reviewed vérifié par ORBi

Vitry, V., & Delaunois, F. (30 September 2019). Doomed ! Parts that have made it through quality control and shouldn't have [Paper presentation]. MS&T2019, Portland, United States - Oregon.

Vitry, V., Bonin, L., & Delaunois, F. (13 September 2019). Corrosion resistance of electroless Ni-B-Sn alloys [Paper presentation]. Eurocorr 2019, Sevilla, Spain.

Vitry, V., Bonin, L., & Delaunois, F. (21 August 2019). BONICOAT.

Vitry, V., Mégret, A., & Bonin, L. (29 June 2019). Characterization and heat treatment of purely binary nickel-boron alloys deposited by electroless plating [Paper presentation]. SMT33, Naples, Italy.

Firrao, D., Dupont, P., Matteis, P., Pinasco, M. R., Ienco, G., Delaunois, F., & Vitry, V. (13 June 2019). Failure analysis of a large extrusion gearbox An International FAS Network Analysis [Paper presentation]. IGF25 - 25th International Conference - Fracture and Structural Integrity, Catania, Italy.

Stanciu, V. I., Vitry, V., Boilet, L., Erauw, J.-P., & Delaunois, F. (22 May 2019). Influence d'un liant dopé sur les propriétés mécaniques des alliages WC Co [Poster presentation]. Poudres 2019 - Matériaux frittés et fabrication additive, Grenoble, France.

Stanciu, V. I., Erauw, J.-P., Vitry, V., & Delaunois, F. (09 April 2019). Amélioration des propriétés mécaniques des alliages WC-Co par l'utilisation d'un liant dopé et frittage SPS [Paper presentation]. Colloque Réseau National de la Métallurgie La Métallurgie, quel Avenir !, Nancy, France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (25 March 2019). Study of the milling parameters optimization in the direct carburization of WO3 by mechanical alloying [Poster presentation]. 11th International Conference on the Science of Hard Materials (ICSHM11), Khao Lak, Thailand.

Mégret, A., Vitry, V., & Delaunois, F. (13 March 2019). Effect of the addition of doped-cobalt on the properties of recycled tungsten carbide powder sintered by SPS [Paper presentation]. Electric Field Enhanced Processing of Advanced Materials II: Complexities and Opportunities.

Konate, F., Chenoy, L., Ancia, P., Yonli, H. A., & Vitry, V. (05 March 2019). Determination of metals content in Printed Circuit Boards according to the particle size [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.

Mégret, A., Vitry, V., & Delaunois, F. (05 March 2019). Study of the sinterability of a recycled tungsten carbide powder [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (05 March 2019). Influence du pré-broyage de la poudre de WC sur la frittabilité des composites WC-Co [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.

Montagne, A., Vitry, V., Bonin, L., Mughal, M. Z., Sebastiani, M., Bemporad, E., Iost, A., & Staia, M. (30 January 2019). Contraintes résiduelles et comportement mécanique de revêtements nickel-bore. Matériaux et Techniques, 107 (2), 205.
Peer reviewed vérifié par ORBi

Habraken, A., Mertens, A., Vitry, V., Colla, M.-S., & Le Bourhis, E. (30 January 2019). Indentation: techniques expérimentales et modélisation multiéchelle. Matériaux et Techniques, 107 (2), 204.
Peer reviewed vérifié par ORBi

Bonin, L., Vitry, V., & Delaunois, F. (01 January 2019). The tin stabilization effect on the microstructure, corrosion and wear resistance of electroless NiB coatings. Surface and Coatings Technology, 357, 353-363.
Peer reviewed vérifié par ORBi

Bonin, L., Delaunois, F., & Vitry, V. (2018). Revêtements chimiques de nickel-bore. In Techniques de l'Ingénieur - Paris (pp. 1-19). Techniques de l'Ingénieur.

Mégret, A., Thuault, A., Broeckmann, C., Sistla, S. K., Vitry, V., & Delaunois, F. (21 November 2018). Frittage des carbures de tungstène-cobalt recyclés [Paper presentation]. Matériaux 2018, Strasbourg, France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (20 November 2018). Nouvelle approche en vue d'introduire des inhibiteurs de croissance des grains dans les carbures cémentés [Paper presentation]. Matériaux 2018, Strasbourg, France.

Vitry, V. (17 October 2018). Failure of galvanized steel water pipes: it's not always what you think [Paper presentation]. Materials Science and Technology 2018, Columbus, United States.

Vitry, V., & Delaunois, F. (17 October 2018). Gamification of metallographic lab practice teaching by failure analysis [Paper presentation]. Materials Science and Technology 2018, Columbus, United States.

Dupont, P., Firrao, D., Vitry, V., & Delaunois, F. (16 October 2018). 'The Failure Analysis & Prevention of a Large and Critical Extrusion Gearbox Part 2/2 : From Failure Analysis to Prevention, an International FAS Network Answer:' [Paper presentation]. Materials Science and Technology 2018, Columbus, United States.

Bonin, L., Castro, C., Vitry, V., Hantson, A.-L., & Delaunois, F. (16 October 2018). Optimization of electroless NiB deposition without stabilizer, based on surface roughness and plating rate. Journal of Alloys and Compounds, 767, 276-284.
Peer reviewed vérifié par ORBi

Dupont, P., Firrao, D., Vitry, V., & Delaunois, F. (16 October 2018). 'The Failure Analysis & Prevention of a Large and Critical Extrusion Gearbox Part 1/2 : The Case Study an Internationbal FAS Network Analysis' [Paper presentation]. Materials Science and Technology 2018, Columbus, United States.

Stanciu, V. I., Vitry, V., & Delaunois, F. (2018). Effect of doped binder on the microstructure of a WC-Co composite [Paper presentation]. Euro PM2018 Congress & Exhibition, Bilbao, Spain.

Mégret, A., Stanciu, V. I., Thuault, A., Broeckmann, C., Sistla, S. K., Vitry, V., & Delaunois, F. (2018). Unconventional Sintering of a Commercial Cemented WC-6Co Hardmetal. Euro PM2018 Congress Proceedings.
Peer reviewed

Stanciu, V. I., Vitry, V., & Delaunois, F. (04 October 2018). Effect of doped binder on the microstructure of a WC-Co composite [Paper presentation]. Euro PM2018 Congress & Exhibition, Bilbao, Spain.

Vitry, V. (28 September 2018). Electro and electroless plating in defence applications [Paper presentation]. MET-2018 HTS-2018, Mumbai, India.

Stanciu, V. I., Vitry, V., & Delaunois, F. (18 September 2018). Impact of WC-Co powder preparation on the SPS sintering behavior [Paper presentation]. 2018 World Congress on Powder Metallurgy, Beijing, China.

Stanciu, V. I., Vitry, V., & Delaunois, F. (2018). Impact of WC-Co powder preparation on the SPS sintering behavior [Paper presentation]. 2018 World Congress on Powder Metallurgy, Beijing, China.

Montagne, A., Bonin, L., Mughal, M. Z., Sebastiani, M., Bemporad, E., Vitry, V., Iost, A., & Staia, M. (13 September 2018). Mechanical behavior of electroless nickel coatings [Poster presentation]. Indentation 2018, Liège, Belgium.

Tosar, F., Delaunois, F., Vitry, V., & Groulard, F. (11 September 2018). Stainless steel corrosion in pharmaceutical industries: Rouging study in laboratory conditions [Paper presentation]. Eurocorr 2018, Krakow, Poland.

Vitry, V., Bonin, L., & Delaunois, F. (09 September 2018). Ultrasound assisted electroless deposition of nickel-boron coatings: Effect of ultrasonic frequency on the tribocorrosion behavior [Poster presentation]. Eurocorr 2018, Krakow, Poland.

Konate, F., Soma, F., Bougouma, M., Buess-Herman, C., Vitry, V., & Yonli, H. A. (16 August 2018). Caractérisation de métaux précieux et de certains métaux d'intérêts dans les déchets d'équipements électriques et électroniques (DEEE) [Paper presentation]. 19èmes Journées Scientifiques Annuelles de la SOACHIM, Lomé, Togo.

Vitry, V., Bonin, L., Bains, N., & Cobley, A. (09 July 2018). Ultrasound assisted electroless nickel-boron plating from alkaline borohydride bath [Paper presentation]. thermec 2018, Paris, France.

Bonin, L., Castro, C., Vitry, V., Hantson, A.-L., & Delaunois, F. (09 July 2018). Optimization of electroless NiB deposition without stabilizer, based on surface roughness and plating rate [Poster presentation]. thermec 2018, Paris, France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (03 July 2018). Effet de l'utilisation d'un liant dopé sur la microstructure des composites WC-Co [Poster presentation]. 9e Colloque Sciences et Technologie des Poudres, Compiègne, France.

Vitry, V., & Bonin, L. (29 June 2018). Enhancement of the mechanical properties of electroless nickel-boron [Paper presentation]. SMT32 - 32nd International Conference on Surface Modification Technologies, San Sebastian, Spain.

Bonin, L., Vitry, V., & Delaunois, F. (29 June 2018). Role of tin as a stabilizer in an electroless nickel-boron plating bath: Electroless NiB-Sn alloys properties [Paper presentation]. SMT32 - 32nd International Conference on Surface Modification Technologies, San Sebastian, Spain.

Montagne, A., Mughal, Z., Bonin, L., Sebastiani, M., Bemporad, E., Vitry, V., Iost, A., & Staia, M. (29 June 2018). Residual stresses in electroless nickel coatings [Poster presentation]. SMT32 - 32nd International Conference on Surface Modification Technologies, San Sebastian, Spain.

Mégret, A., Stanciu, V. I., Thuault, A., Vitry, V., & Delaunois, F. (19 June 2018). Microwave sintering of cemented tungsten-cobalt carbides [Poster presentation]. International Symposium on Inorganic and Environmental Materials, Gent, Belgium. doi:10.13140/RG.2.2.32962.89287

Delaunois, F., Roudet, F., & Vitry, V. (2018). Trends in heat treatment and surface engineering [Paper presentation]. 24th IFHTSE, Paris, France.

Vitry, V., Francq, E., & Bonin, L. (02 May 2018). Mechanical properties of heat-treated duplex electroless nickel coatings. Surface Engineering, 35 (2), 158-166.
Peer reviewed vérifié par ORBi

Bonin, L., & Vitry, V. (16 April 2018). Electroless deposition of nickel-boron coatings using ultrasonic frequency to enable low temperature [Paper presentation]. 16th meeting of the european society of sonochemistry, Besançon, France.

Delaunois, F., & Vitry, V. (11 April 2018). The teaching of physical metallurgy based on the acquisition of soft-skills [Poster presentation]. 10th International Materials Education Symposium, Cambridge, United Kingdom.

Mégret, A., Vitry, V., & Delaunois, F. (27 March 2018). Unconventional sintering of cemented WC-Co carbides [Poster presentation]. Mardi des Chercheurs 2018, Valenciennes, France. doi:10.13140/RG.2.2.31795.94242

Konate, F., Ancia, P., Yonli, H. A., & Vitry, V. (27 March 2018). Procédé de libération des matériaux contenus dans les cartes électroniques [Poster presentation]. Mardi des chercheurs, Valenciennes, France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (27 March 2018). Optimisation de l'homogénéisation des alliages WC-Co [Poster presentation]. Mardi des Chercheurs (MdC2018), Valenciennes, France.

Bonin, L., Vitry, V., & Delaunois, F. (27 March 2018). Role of tin as a stabilizer in an electroless nickel-boron plating bath: Electroless NiB-Sn alloys properties [Poster presentation]. Mardi des Chercheurs (MdC2018), Valenciennes, France.

Vitry, V., & Decker, M. (22 March 2018). Revêtements de nickel chimique anti usure [Paper presentation]. Journée Technique A3TS France-Nord/Belgique : Innovation en traitement de surface anti-usure, Université de Mons, Mons, Belgium.

Equeter, L., Tiberi, L., Boumazguida, K., Cauchie, D., De Lièvre, B., Deprince, E., Jandrain, T., Leclère, P., Lefevere, J., Marchal, C., Quenon, A., & Vitry, V. (07 March 2018). PhD Яevolution : la naissance d'une communauté de doctorants [Paper presentation]. Journée Doctorale Transfrontalière, Reims, France.

Bonin, L., Vitry, V., & Delaunois, F. (23 February 2018). Corrosion behaviour of electroless high boron-mid phosphorous nickel duplex coatings in the as-plated and heat-treated states in NaCl, H2SO4, NaOH and Na2SO4 media. Materials Chemistry and Physics, 208, 77-84.
Peer reviewed vérifié par ORBi

Bonin, L., Bains, N., Vitry, V., & Cobley, A. (26 October 2017). Electroless deposition of nickel-boron coatings using low frequency ultrasonic agitation: Effect of ultrasonic frequency on the coatings properties and the deposition of electroless Ni-B composite [Paper presentation]. 3rd e-MINDS Workshop, Barcelona, Spain.

Bonin, L., Bains, N., Vitry, V., & Cobley, A. (25 October 2017). Electroless deposition of nickel-boron coatings using low frequency ultrasonic agitation: Effect of ultrasonic frequency on the coatings properties and the deposition of electroless Ni-B composite [Paper presentation]. 3rd e-MINDS Workshop, Barcelona, Spain.

Delaunois, F., & Vitry, V. (24 October 2017). Enseignement des alliages métalliques orienté compétences [Paper presentation]. Journées Annuelles SF2M 2017, Lyon, France.

Vitry, V., Stanciu, V. I., Dupont, P., & Delaunois, F. (12 October 2017). Failure of a helicopter rotor pinion [Paper presentation]. MS&T2017, Pittsburgh, United States.

Rachidi, R., El Kihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (04 October 2017). Wear Performance of Thermally Sprayed NiCrBSi and NiCrBSi - WC Coatings Under Two Different Wear Modes. Journal of Materials and Environmental Science, 8 (12), 4550 - 4559.
Peer reviewed vérifié par ORBi

Stanciu, V. I., Vitry, V., & Delaunois, F. (2017). Optimization of the introduction of grain growth inhibitor in cemented carbides [Paper presentation]. Euro PM2017 Congress & Exhibition, Milano, Italy.

Stanciu, V. I., Vitry, V., & Delaunois, F. (02 October 2017). Optimization Of The Introduction Of Grain Growth Inhibitor In Cemented Carbides [Paper presentation]. Euro PM2017 Congress & Exhibition, Milano, Italy.

Stanciu, V. I., Vitry, V., & Delaunois, F. (19 September 2017). Influence of grinding speed and balls diameter on the microstructure of a WC-10% wt doped binder [Paper presentation]. RoPM&AM 2017, Cluj-Napoca, Romania.

Danilova, S., Graves, J., Bonin, L., Vitry, V., & Cobley, A. (12 September 2017). Electroless Ni-B plating in a gradient magnetic field [Paper presentation]. Electrochem 2017, Brimingham, Unknown/unspecified.

Vitry, V., Bonin, L., Bains, N., & Cobley, A. (07 September 2017). Corrosion behaviour of ultrasound assisted electroless nickel-boron coatings [Paper presentation]. EUROCORR2017, Prague, Unknown/unspecified.

Tosar, F., Vitry, V., Groulard, F., Mallet, L., & Delaunois, F. (05 September 2017). Study of stainless steel corrosion in pharmaceutical facilities: Initiation and development [Paper presentation]. EUROCORR2017, Prague, Unknown/unspecified.

Vitry, V., & Bonin, L. (20 July 2017). Formation and characterization of multilayers borohydride and hypophosphite reduced electroless nickel deposits. Electrochimica Acta, 243, 7-17.
Peer reviewed vérifié par ORBi

Bonin, L., Vitry, V., & Delaunois, F. (06 July 2017). Properties of Electroless Nickel-Boron coatings stabilized by bismuth salts [Paper presentation]. SMT31 - International Conference on Surface Modification Technologies, Mons, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (04 July 2017). Effect of SPS sintering on WC-Co powder densification [Poster presentation]. 4ème Journée des Chercheurs de l'Institut Matériaux, UMONS, Belgium.

Vitry, V., & Delaunois, F. (04 July 2017). Effect of SPS sintering on WC-Co powder densification [Poster presentation]. 4ème Journée des Chercheurs de l'Institut Matériaux, UMONS, Belgium.

Bonin, L., Vitry, V., & Delaunois, F. (04 July 2017). Replacement of the lead stabilizer in electroless nickel-boron baths [Paper presentation]. The 4th researchers workshop of the materials research institute, Mons, Belgium.

Vitry, V., Bonin, L., & Delaunois, F. (28 June 2017). Elimination du plomb dans un bain de nickel-bore chimique [Paper presentation]. Congrès A3TS, Nice, France.

Delaunois, F., Bonin, L., & Vitry, V. (13 June 2017). Interest in composites formation to improve electroless nickel coatings properties [Paper presentation]. World Congress on Advanced Materials WCAM2017, Xi'an, China.

Avez, C., Coussement, G., Debailleux, L., Delaunois, F., Descamps, F., Ducobu, F., Dumont, E., Lupant, D., Rivière, E., & Vitry, V. (01 June 2017). Les techniques optiques de pointe au service de l'Ingénieur. Polytech.News, 55.

Stanciu, V. I., Vitry, V., & Delaunois, F. (2017). Cobalt-inhibitor mixtures for cemented carbides [Paper presentation]. 19th Plansee Seminar 2017, Reutte, Austria.

Rachidi, R., Elkihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (11 May 2017). Non-destructive Testing of Adhesion Defects in Thick Composite Coating by Active Infrared Thermography Technique [Poster presentation]. International Conference on Civil Engineering and Materials (ICCEM'2017), Al Hoceima, Morocco.

Rachidi, R., Elkihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (11 May 2017). Comparative Study of the Properties of WC Reinforced Ni-base Alloy Coatings Produced by Flame Spraying and by Laser Cladding [Paper presentation]. International Conference on Civil Engineering and Materials (ICCEM'2017), Al Hoceima, Morocco.

Vitry, V., Bonin, L., & Delaunois, F. (2017). Revêtements chimiques de nickel-bore, vers une formulation sans métaux lourds [Paper presentation]. Tricoat-Finishair 2017, Besançon, France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (04 May 2017). Influence de la vitesse de broyage et du diamètre de billes sur la microstructure d'un alliage WC-10%pds de cobalt dopé avec 1%pds de Cr3C2 [Paper presentation]. PMF2017, Toulouse, France.

Bonin, L., Bains, N., Vitry, V., & Cobley, A. (01 May 2017). Ultrasound assisted electroless deposition of nickel-boron coatings: Effect of ultrasonic frequency on the coatings. Ultrasonics, 77, 61-68.
Peer reviewed vérifié par ORBi

Vitry, V. (2017). Métaux, Incas et Carpes.

Vitry, V., Bonin, L., & Malet, L. (26 April 2017). Chemical and structural characterization of electroless duplex NiP/NiB coatings on steel. Surface Engineering, 34, 475-484.
Peer reviewed vérifié par ORBi

Vitry, V. (2017). Turquie: la solidarité universitaire doit s'organiser. le soir+.

Rachidi, R., Elkihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (11 April 2017). Anti-wear performance of NiCrBSi/NiCrBSi-WC coatings produced by flame thermal spraying process [Poster presentation]. 13ème congrès de mécanique (CMM2017), Meknès, Morocco.

Vitry, V. (2017). Un mardi par an, les chercheurs de l'UMONS font connaissance. L'Avenir.net, Mons-Centre Le fil d'actu.

Vitry, V. (2017). Rencontre annuelle pour les chercheurs de l'UMONS.

Bonin, L., Vitry, V., & Delaunois, F. (07 March 2017). Electroless Nickel-Boron bath stabilized by bismuth salts: Effect of bismuth salts on the coatings [Poster presentation]. Mardi des Chercheurs (MdC2017), Mons, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (07 March 2017). Cobalt-inhibitors mixtures for cemented carbides [Poster presentation]. Mardi des Chercheurs (MdC2017), Mons, Belgium.

Vitry, V., & Delaunois, F. (06 March 2017). Cobalt - inhibitors mixtures for cemented carbides [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.

Vitry, V., & Bonin, L. (15 February 2017). Increase of boron content in electroless nickel-boron coating by modification of plating conditions. Surface and Coatings Technology, 311, 164-171.
Peer reviewed vérifié par ORBi

Bonin, L., Vitry, V., & Delaunois, F. (08 February 2017). Influence of the anionic part of the stabilizing agent on ENB coatings. Materials and Manufacturing Processes, 33 (2), 227-231. doi:10.1080/10426914.2017.1291949
Peer reviewed vérifié par ORBi

Delaunois, F., Edwin, D., Marchal, Y., & Vitry, V. (01 January 2017). Accelerated aging and Portevin-Le Chatelier effect in AA 2024. Materials Science Forum, 879, 524-529.
Peer reviewed

Bonin, L., & Vitry, V. (15 December 2016). Mechanical and wear characterization of electroless nickel mono and bilayers and high boron-mid phosphorous electroless nickel duplex coatings. Surface and Coatings Technology, 307, 957-962.
Peer reviewed vérifié par ORBi

Vitry, V., Bonin, L., & Malet, L. (06 December 2016). Morphological and microstructural observation of Duplex electroless coatings by TEM after sample selection by FIB [Paper presentation]. 2nd Caparica Christmas Conference on Sample Treatment, Caparica (Lisbonne), Portugal.

Rachidi, R., Elkihel, B., Delaunois, F., & Vitry, V. (01 December 2016). Microstructure and Microhardness Properties of Flame Thermal Sprayed NiCrBSi Alloy and NiCrBSi-WC Composite Coatings [Paper presentation]. 1st International Conference on Materials and Environmental Science (ICMES2016), Oujda, Morocco.

Vitry, V., Stanciu, V. I., & Delaunois, F. (26 October 2016). Some study on the milling parameters optimization in the direct carburization of WO3 by mechanical alloying [Paper presentation]. MS&T 2016, Salt Lake City, United States - Utah.

Delaunois, F., Stanciu, V. I., & Vitry, V. (26 October 2016). How different laboratories can obtain various results in the same case of failure ? [Paper presentation]. MS&T 2016, Salt Lake City, United States - Utah.

Stanciu, V. I., Vitry, V., & Delaunois, F. (2016). Nanostructured Mix of Tungsten Carbide with Cobalt for Wear Parts [Paper presentation]. 2016 Powder Metallurgy World Congress, octobre 2016, Hamburg, Germany.

Bonin, L., & Vitry, V. (12 October 2016). THE INFLUENCE OF COATING THICKNESS AND SUBSTRATE HARDNESS ON SUPERFICIAL HARDNESS AND WEAR BEHAVIOR OF ELECTROLESS NICKEL-BORON COATINGS [Paper presentation]. Indentation 2016, Lille , France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (09 October 2016). Nanostructured mix of tungsten carbide with cobalt for wear parts [Poster presentation]. 2016 Powder Metallurgy World Congress, octobre 2016, Hamburg, Germany.

Dawant, S., Daubie, E., Delaunois, F., Vitry, V., Colmant, S., & Stanciu, V. I. (2016). Etude de faisabilite de mesures d'epaisseur de nickel sur supports d'acier par fluorescence X.

Bonin, L., Francq, E., & Vitry, V. (15 September 2016). Corrosion behavior of electroless Ni-P/Ni-B Duplex Coatings [Paper presentation]. EUROCORR 2016, Montpellier, France.

Delaunois, F., Tshimombo, A., Stanciu, V. I., & Vitry, V. (10 September 2016). Contribution of acoustic emission to the monitoring of stress corrosion cracking of stainless steel: identification of the phases of the corrosion process and use of an accelerated test. Corrosion Science, 110, 273-283.
Peer reviewed vérifié par ORBi

Vitry, V., & Bonin, L. (18 August 2016). Formation and characterization of multilayers borohydride and hypophosphite reduced electroless nickel deposits [Paper presentation]. 11th International Symposium on Electrochemical Micro & Nanosystem Technologies, Bruxelles, Belgium.

Bonin, L., Bains, N., Vitry, V., & Cobley, A. (18 August 2016). Properties of electroless Ni-B-WC composite coatings [Paper presentation]. 11th International Symposium on Electrochemical Micro & Nanosystem Technologies, Bruxelles, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (05 July 2016). Influence of the speed and size of balls on the temperature during tungsten carbide production (WC) by mechanical alloying [Poster presentation]. 3ème Journée de l'Institut Matériaux, Mons, Belgium.

Bonin, L., Vitry, V., & Cobley, A. (05 July 2016). ultrasound assisted electroless deposition of nickel-boron coatings: effect of ultrasonic frequency on the coating [Poster presentation]. 3ème Journée de l'Institut Matériaux, Mons, Belgium.

Bonin, L., Vitry, V., & Delaunois, F. (2016). Influence of the anionic part of the surfactant on electroless nickel-boron coatings [Paper presentation]. XXX International Conference on Surface Modification Technologies (SMT30), Milan, Italy.

Vitry, V., Bonin, L., & Delaunois, F. (31 May 2016). Can heat treatment improve duplex electroless nickel coatings? [Paper presentation]. THERMEC'2016, Gratz, Austria.

Stanciu, V. I., Vitry, V., & Delaunois, F. (18 May 2016). Influence de la température sur la production de carbure de tungstène (WC) par mechanical alloying [Poster presentation]. Matinée des Chercheurs 2016, Université de Valencienne, France.

Bonin, L., & Vitry, V. (18 May 2016). The use of the pin-on-disk tribology test method to study wear properties of electrolessNi-P/Ni-B duplex coatings [Poster presentation]. 9ème édition de la Matinée des Chercheurs 2016 (MdC2016); Mons; Belgique; 2015, Valenciennes, France.

Vitry, V. (14 May 2016). Promise of Duplex Coatings and Challenges in Industrial Applications [Paper presentation]. 2 nd Heat Treatment & Surface Engineering Conference and Expo 2016, Chennai, India.

Vitry, V., & Delaunois, F. (15 December 2015). Initiation of borohydride-reduced nickel boron plating on steels with various carbon and nickel content. Applied Surface Science, 359, 692-703.
Peer reviewed vérifié par ORBi

Delaunois, F., & Vitry, V. (2015). Electroless Nickel-Boron Coatings Process, Composition, Microstructure and Properties. In Encyclopedia of Iron, Steel, and Their Alloys. Taylor & Francis Group, London.

Stanciu, V. I., Vitry, V., & Delaunois, F. (29 October 2015). Production of tungsten carbide  nanopowders by mechanical alloying [Paper presentation]. 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (29 October 2015). Tungsten carbide powder obtained by direct carburization of tungsten trioxide using mechanical alloying method. Journal of Alloys and Compounds, 659, 302-308.
Peer reviewed vérifié par ORBi

Stanciu, V. I., Vitry, V., & Delaunois, F. (28 October 2015). Direct Carburization Of Tungsten Trioxide By Mechanical Alloying. Advanced Materials Research, 1128, 51-57. doi:10.4028/www.scientific.net/AMR.1128.51
Peer reviewed

Vitry, V., Tosar, F., Mallet, L., Bonin, L., & Delaunois, F. (08 October 2015). Characterization by XRD and TEM of various electroless nickel-boron deposits [Paper presentation]. Materials Science & Technology 2015, Columbus, United States.

Bonin, L., Vitry, V., & Delaunois, F. (2015). Leaching of hexavalent chromium from stainless steelmaking slags and the pH influence on the chromium mobility [Paper presentation]. SIPS2015 - Sustainable Industrial Processing Summit, Antalya, Turkey.

Stanciu, V. I., Vitry, V., & Delaunois, F. (2015). Tungsten carbide nano powder obtained by mechanical alloying in high energy mill [Paper presentation]. SIPS2015 - Sustainable Industrial Processing Summit, Antalya, Turkey.

Delaunois, F., Stanciu, V. I., & Vitry, V. (08 October 2015). Analysis and technical diagnostics of various cases of failure of ferrous alloys components after use [Paper presentation]. Materials Science & Technology 2015, Columbus, United States.

Vitry, V. (07 October 2015). Un projet 'historique' : la réduction des oxydes de fer au bas fourneau. Polytech.News, 52.

Bonin, L., Vitry, V., & Delaunois, F. (11 September 2015). Damage of Ni-P/Ni-B duplex coatings, after diamond scratch tests [Poster presentation]. BSM Annual Meeting 2015: When Materials Meet Biology, Mons, Unknown/unspecified.

Delaunois, F., Tosar, F., Vitry, V., & Hantson, A.-L. (2015). Incidence of microbial corrosion of metallic tubes in sanitary facilities [Paper presentation]. EUROCORR 2015, Graz, Austria.

Bonin, L., Vitry, V., & Delaunois, F. (07 September 2015). Electroless Ni-P/Ni-B Duplex Coatings: Microstructural and Mechanical Properties [Poster presentation]. Mapping the Future of Materials Science, Paris, France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (2015). Broyage en milieu liquide d'un liant pour les carbures cémentés à base de cobalt dopé avec Cr3C2. Récents Progrès en Génie des Procédés, (107/2015).

Vitry, V., & Delaunois, F. (2015). Electroless nickel-phosphorous Vs electroless nickel-boron: comparison of hardness, abrasion resistance, scratch test response and corrosion behavior. In Comprehensive Guide for Nanocoatings Technology, Volume 1: Deposition and Mechanism (pp. 145-173). Nova Science Pub Inc.

Vitry, V., & Delaunois, F. (2015). Nanostructured Electroless nickel-boron deposition: initiation mechanism and formation, effect of bath chemistry modification. In Comprehensive Guide for Nanocoatings Technology: Volume 3: Properties and Development (pp. 283-308). Nova Science Pub Inc.

Vitry, V., Bonin, L., & Delaunois, F. (2015). Microstructural, mechanical and tribological properties of electroless duplex NiP/NiB coatings on steel [Paper presentation]. SMT29, Copenhagen, Denmark.

Vitry, V., Tosar, F., Bonin, L., & Delaunois, F. (09 June 2015). Microstructural and mechanical characterization of mono and bi-layer electroless nickel coatings [Paper presentation]. SurFin 2015, Rosemont, United States.

Bonin, L., Vitry, V., & Delaunois, F. (08 May 2015). Comparison of different batch leaching tests on steelmaking slags [Poster presentation]. NANOWAL (The Wallonia Network for Nanotechnologies) and MAIN (The MAterials, Interfaces and Nanostructures Doctoral School) on Nanomaterials and Energy, Mons, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (08 April 2015). Broyage en milieu liquide d'un liant pour les carbures cémentés à base de cobalt dopée avec Cr3C2 [Poster presentation]. colloque STPMF 2015, Nancy, France.

Vitry, V. (08 April 2015). Teaching old tricks to new dogs : using the bloomery as a teaching tool for extractive metallurgy [Paper presentation]. 7th Materials Education Symposium, Cambridge, Unknown/unspecified.

Vitry, V. (19 March 2015). Traitements et modifications des surfaces : Principes généraux [Paper presentation]. Journée Technique A3TS France Nord-Belgique: protection et décoration des métaux, Fourmies, France.

Bonin, L., Vitry, V., & Delaunois, F. (18 March 2015). Comparison of different batch leaching tests on steelmaking slags [Paper presentation]. Recycling 2015, Metz, France.

Vitry, V. (10 March 2015). A modern version of the bloomery process [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (10 March 2015). Some aspects of the production of nano tungsten carbide powder (WC) by mechanical alloying [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.

Bonin, L., Vitry, V., & Delaunois, F. (10 March 2015). Comparison of different batch leaching tests on steelmaking slags [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (06 March 2015). Direct Carburization Of Tungsten Trioxide By Mechanical Alloying [Paper presentation]. BRAMAT, Brasov, Romania.

Vitry, V., & Delaunois, F. (2014). Nanostructured electroless nickel-boron coatings for wear resistance. In Anti-Abrasive Nanocoatings: Current and future applications (pp. 157-200). Woodhead Publishing.

Delaunois, F., Stanciu, V. I., Mario, S., & Vitry, V. (28 November 2014). Caractérisation d'une fonte à haut chrome alliée au niobium pour des cylindres de laminoir [Paper presentation]. Matériaux 2014, Montpellier, France.

Rachidi, R., El Kihel, B., Delaunois, F., & Vitry, V. (26 November 2014). Etude microstructurale des revêtements WC-Co déposés par cladding laser sur l'acier avec différentes teneurs en Co [Paper presentation]. Matériaux 2014, Montpellier, France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (25 November 2014). Broyage par voie humide d'une poudre de cobalt dopé avec Cr3C2 en tant que liant dans les carbures cémentés [Poster presentation]. Matériaux 2014, Montpellier, France.

Vitry, V., Tosar, F., & Delaunois, F. (24 November 2014). Etude de l'initiation et de la formation de dépôts chimiques de nickel-bore sur divers substrats ferreux [Paper presentation]. Matériaux 2014, Montpellier, France.

Delaunois, F., Tshimombo, A., Stanciu, V. I., & Vitry, V. (14 October 2014). Contribution of acoustic emission to the monitoring of stress corrosion cracking of stainless steel: identification of the phases of the corrosion process and use of an accelerated test [Paper presentation]. Materials Science & Technology 2014, Pittsburgh, United States.

Vitry, V., Tosar, F., & Delaunois, F. (08 September 2014). Study of corrosion resistance of electroless duplex NiP/NiB coatings in different media by potentiodynamic polarisation and SEM observation [Paper presentation]. EUROCORR 2014, Pise, Italy.

Vitry, V., Steve, N., Breyer, J.-P., Sinnaeve, M., & Delaunois, F. (2014). Study of the microstructure of two centrifugal cast high speed steels destined for hot strip mills applications [Paper presentation]. Abrasion 2014, Stockholm, Sweden.

Delaunois, F., Tosar, F., & Vitry, V. (01 June 2014). Corrosion Behaviour and Biocorrosion of Galvanized Steel Water Distribution Systems. Bioelectrochemistry, 97 (c), 110-119.
Peer reviewed vérifié par ORBi

Vitry, V. (30 May 2014). Valorisation énergétique des résidus de l'industrie agro-alimentaire [Paper presentation]. 2ème journée technique de la PFT2M de Oujda, Oujda, Morocco.

Stanciu, V. I., Vitry, V., & Delaunois, F. (2014). A ready to use Cr3C2 doped cobalt powder as binder in cemented carbides [Paper presentation]. Metal2014, Brno, Unknown/unspecified.

Vitry, V., & Delaunois, F. (2014). Corrosion protection of steel and aluminium alloys by electroless nickel-boron and duplex electroless NiP-NiB coatings [Paper presentation]. IMTCE 2014 - International Symposium on Corrosion & Materials Degradation 2014, Kuala Lumpur, Malaysia.

Vitry, V., Tosar, F., & Delaunois, F. (03 May 2014). Mechanical properties, wear and scratch test resistance of various electroless nickel deposits [Paper presentation]. ICMCTF, San Diego, United States - California.

Vitry, V., Sens, A., & Delaunois, F. (25 April 2014). Comparison of various electroless nickel coatings on steel: structure, hardness and abrasion resistance. Materials Science Forum, 783-786, 1405-1413.

Rachidi, R., El Kihel, B., & Vitry, V. (24 April 2014). Modélisation numérique de la flamme issue d'une torche de projection thermique - Etude de l'influence des paramètres opératoires [Paper presentation]. 5th International Symposium on Aircraft Materials, Marrakech, Morocco.

Vitry, V. (20 March 2014). Les traitements de surface en voie liquide, historique et principes, le choix du nickel [Paper presentation]. Journée Technique A3TS France Nord-Belgique: LES TRAITEMENTS SUPERFICIELS ANTICORROSION ET ANTI-USURE PAR VOIE HUMIDE, Maubeuge, France.

Tshimombo, A., Idrissi, H., Ahuka, A., Vitry, V., & Delaunois, F. (01 March 2014). 'Etude de l'influence de la contrainte appliquée à l'éprouvette en corrosion sous tension suivie par émission acoustique'. Congo Sciences, 2 (1), 10-16.

Vitry, V., & Delaunois, F. (07 February 2014). Revêtements de nickel chimique: propriétés mécaniques et tribologiques des dépôts au bore et au phosphore [Paper presentation]. Journée Technique île de France et assemblée générale A3TS, Paris, France.

Vitry, V., Denollin, G., & Delaunois, F. (2013). Observation of the structure and defects of ASTM A387 grade 22 steel solidified by continuous casting [Paper presentation]. 19th IAS steel conference, Rosario, Argentina.

Delaunois, F., Sens, A., & Vitry, V. (01 September 2013). Do Nickel and Nickel Alloys Actually Passivate in Various Media? [Paper presentation]. EUROCORR2013, Estoril, Portugal.

Delaunois, F., Sens, A., & Vitry, V. (03 June 2013). Evolution de la chimie d'un bain de nickel-bore en cours de dépôt [Paper presentation]. A3TS Marseille 2013 - TRAITEMENT DES MATERIAUX ET DES SURFACES - Perspectives 2020, Marseille, France.

Vitry, V., Aubert, A., & Delaunois, F. (04 April 2013). Implementing an evidence-based reform of a Material engineering curriculum [Poster presentation]. 5th International Symposium on Materials Education, Cambridge, United Kingdom.

Vitry, V., Sens, A., & Delaunois, F. (01 April 2013). Experimental study on the formation of electroless nickel-boron coatings from borohydride-reduced bath on mild steel. Products Finishing, 77 (7), 14-15.
Peer reviewed

Vitry, V., Sens, A., & Delaunois, F. (12 March 2013). Abrasion resistance of steel coated with various chemical nickel deposit [Poster presentation]. 7ième Matinée des Chercheurs, Mons, Belgium.

Vitry, V., Sens, A., Kanta, A. F., & Delaunois, F. (01 November 2012). Experimental study on the formation and growth of electroless nickel-boron coatings from borohydride-reduced bath on mild steel. Applied Surface Science, 263, 640-647.
Peer reviewed vérifié par ORBi

Delaunois, F., Sens, A., & Vitry, V. (09 September 2012). Corrosion behaviour and Biocorrosion of Galvanized Steel Water Distribution Systems [Paper presentation]. EUROCORR 2012, Istanbul, Turkey.

Vitry, V., Sens, A., & Delaunois, F. (27 July 2012). Abrasion resistance of steel coated with various chemical nickel deposit [Poster presentation]. Junior Euromat, Lausanne, Switzerland.

Vitry, V., Kanta, A. F., & Delaunois, F. (20 June 2012). Evolution of reactive concentration during borohydride-reduced electroless nickel-boron plating and design of a replenishment procedure. Industrial and Engineering Chemistry Research, 51 (27), 9227-9234.
Peer reviewed vérifié par ORBi

Vitry, V., Sens, A., & Delaunois, F. (2012). Experimental study on the formation of electroless nickel-boron coatings from borohydride-reduced bath on mild steel [Paper presentation]. SurFin 2012, Las Vegas, United States - Nevada.

Vitry, V., Sens, A., & Delaunois, F. (08 June 2012). Surface reinforcement of steel substrate by electroless nickel-boron [Paper presentation]. 1st World Conference on Advanced Materials, Beijing, China.

Vitry, V., Sens, A., & Delaunois, F. (2012). Initial deposition of electroless nickel from borohydride-reduced bath on various ferrous alloys [Paper presentation]. Metal 2012, Brno, Unknown/unspecified.

Vitry, V., Sens, A., & Delaunois, F. (11 May 2012). Abrasive wear resistance of steel coated with various electroless nickel coatings [Poster presentation]. Journées Internationales Francophones de Tribologie, Aix-en-Provence, France.

Delaunois, F., Aubert, A., & Vitry, V. (14 April 2012). Is there a future for teaching metallurgy in Belgium? [Poster presentation]. Materials Education Symposium, Cambridge, United Kingdom.

Delaunois, F., Stanciu, V. I., Denollin, G., & Vitry, V. (01 March 2012). Structure and defects of ASTM A387 grade 22 steel solidified by continuous casting [Poster presentation]. La Matinée des chercheurs 2012, Bruxelles , Belgium.

Vitry, V., Kanta, A. F., & Delaunois, F. (28 February 2012). Application of nitriding to electroless nickel-boron coatings: Chemical and structural effects; Mechanical characterization; Corrosion resistance. Materials and Design, 39, 269-278.
Peer reviewed vérifié par ORBi

Vitry, V., Sens, A., Kanta, A. F., & Delaunois, F. (11 February 2012). Wear and corrosion resistance of heat treated and as-plated Duplex NiP/NiB coatings on 2024 aluminium alloys. Surface and Coatings Technology, 206, 3421-3427.
Peer reviewed vérifié par ORBi

Vitry, V., Kanta, A. F., Dille, J., & Delaunois, F. (11 February 2012). Structural state of electroless nickel-boron deposits (5 wt. % B): re-characterization by XRD and FIB-TEM. Surface and Coatings Technology, 206, 3444-3449.
Peer reviewed vérifié par ORBi

Vitry, V., Nardone, S., Breyer, J.-P., Sinnaeve, M., & Delaunois, F. (01 February 2012). Microstructure of two centrifugal cast high speed steels for hot strip mills applications. Materials and Design, 34, 372-378.
Peer reviewed vérifié par ORBi

Vitry, V., Kanta, A. F., Sens, A., & Delaunois, F. (01 January 2012). Tribological characterization of electroless nickel-boron coatings. Advanced Materials Research, 409, 808-813.

Vitry, V., Kanta, A. F., & Delaunois, F. (25 December 2011). Mechanical and wear characterization of electroless nickel-boron coatings. Surface and Coatings Technology, 206, 1879-1885.
Peer reviewed vérifié par ORBi

Vitry, V., Kanta, A. F., & Delaunois, F. (13 September 2011). Synthesis of nanocrystalline Ni-B alloy by electroless deposition and effect of heat treatments on their structural state [Paper presentation]. Euromat 2011, Montpellier, France.

Sens, A., Kanta, A. F., Vitry, V., & Delaunois, F. (13 September 2011). Corrosion resistance of electroless Ni-B coatings in sodium chloride, and alkaline and acid media [Poster presentation]. Euromat 2011, Montpellier, France.

Delaunois, F., Sinnaeve, M., Breyer, J.-P., & Vitry, V. (2011). Effects of Ti, V and Nb carbide on the properties of ICDP cast iron finishing rolls [Paper presentation]. Abrasion 2011, Liège, Belgium.

Vitry, V., Dagrain, F., Delaunois, F., & VanParys, L. (07 July 2011). Characterization of the consolidation effect of ethyl silicate on Maastricht limestone [Paper presentation]. ConserStone 2011 - Conservation of Stone Heritage, Orléans, France.

Vitry, V., Kanta, A. F., & Delaunois, F. (2011). Mechanical and wear characterization of electroless nickel-boron coatings [Paper presentation]. ICMCTF 2011, San Diego, United States - California.

Vitry, V., Kanta, A. F., & Delaunois, F. (15 December 2010). Initiation and formation of electroless nickel-boron coatings on mild steel: effect of substrate roughness. Materials Science and Engineering: B, Solid-State Materials for Advanced Technology, 175, 266-273.
Peer reviewed vérifié par ORBi

Vitry, V., Kanta, A. F., & Delaunois, F. (01 October 2010). Influence of local composition on morphology of electroless nickel-boron deposits on mild steel. Praktische Metallographie, 42, 315-320.

Kanta, A. F., Poelman, M., Vitry, V., & Delaunois, F. (27 August 2010). Nickel-boron electrochemical properties investigations. Journal of Alloys and Compounds, 505 (1) (27), 151-156.
Peer reviewed vérifié par ORBi

Kanta, A. F., Vitry, V., & Delaunois, F. (2010). Effect of wear and heat treatments on the corrosion resistance of electroless nickel-boron coated mild steel [Paper presentation]. Conference on Corrosion and Materials Protection, Prague, Czechia.

Vitry, V. (2010). Electroless Nickel-Boron deposits: Synthesis, formation and characterization; Effect of heat treatments; Analytical modeling of the structural state [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/6007

Kanta, A. F., Vitry, V., & Delaunois, F. (01 January 2010). Wear and Corrosion Resistance of Electroless Nickel-Boron Coated Mild Steel. Materials Science Forum, 638-642, 846-851.
Peer reviewed

Kanta, A. F., Vitry, V., & Delaunois, F. (31 December 2009). Effect of thermochemical and heat treatments on electroless nickel-boron. Materials Letters, 63 (30), 2662-2665.
Peer reviewed vérifié par ORBi

Vitry, V., & Delaunois, F. (2009). How heat treatment can give better properties to electroless nickel-boron coatings. Metallurgia Italiana, (Avril 2009), 49-54.

Vitry, V., Kanta, A. F., & Delaunois, F. (17 March 2009). Initiation and formation of electroless nickel-boron deposits on steel [Poster presentation]. Matinée des chercheurs 2009, Mons, Belgium.

Vitry, V., & Delaunois, F. (01 September 2008). How heat treatment can give better properties to electroless nickel-boron coatings [Paper presentation]. Journée des doctorants de l'Ecole Doctorale, Liège, Belgium.

Vitry, V., Delaunois, F., & Dumortier, C. (2008). How heat treatment can give better properties to electroless nickel-boron coatings [Paper presentation]. European Conference on Heat Treatment 2008, Vérone, Italy.

Vitry, V., & Delaunois, F. (2008). A study of mechanical and tribological properties of electroless nickel-boron deposits after heat and thermochemical treatments [Paper presentation]. Friction, wear and wear protection 2008, Aix-la-Chapelle, Germany.

Vitry, V., Delaunois, F., & Dumortier, C. (01 April 2008). Mechanical properties and scratch test resistance or nickel-boron coated aluminium alloy after heat treatments. Surface and Coatings Technology, 202 (14), 3316-3324.
Peer reviewed vérifié par ORBi

Vitry, V., & Delaunois, F. (26 February 2008). Electroless Nickel-Boron(-Pb) coatings : study of deposition, properties and heat treatments [Paper presentation]. Matinée des Chercheurs 2008, Bruxelles, Belgium.

Vitry, V. (26 January 2008). Electroless Nickel-Boron(-Pb) coatings : study of deposition, properties and heat treatments [Paper presentation]. Journée Matériaux, FPMs, Mons, Belgium.

Vitry, V., & Delaunois, F. (01 April 2007). A study of mechanical and tribological properties of nickel-boron coated aluminium alloys. ATB Métallurgie, 45 (1-4), 353-358.
Peer reviewed

Vitry, V., Delaunois, F., & Dumortier, C. (01 April 2007). Improvement of hardness and mechanical properties of electroless nickel-boron deposits by thermochemical treatment. Journal of Applied Surface Finishing, 2 (2), 106-111.
Peer reviewed

Vitry, V., & Delaunois, F. (2006). Improvement of hardness and mechanical properties of electroless nickel-boron deposits by thermochemical treatment [Paper presentation]. Sur/fin 2006, Milwaukee, United States.

Vitry, V., & Delaunois, F. (02 May 2006). Study of hardness and mechanical properties of electroless nickel-boron coatings on various substrates after thermochemical treatment. Algerian Journal of Advanced Materials, 3, 111-115.

Vitry, V., & Delaunois, F. (2006). Nitridation treatments to improve the hardness and mechanical properties of electroless nickel-boron deposits [Paper presentation]. IFHTSE 15 and SMT20 (International Federation of Heat Treating and Surface Finishing 15 and Surface Modification Treatments 20 Congress), Vienne, Austria.

Vitry, V., Renaux, F., Gouttebaron, R., Dauchot, J.-P., & Hecq, M. (2006). Preparation and characterisation of gasochromic thin films. Thin Solid Films, (502), 265-269.
Peer reviewed vérifié par ORBi

Vitry, V. (2003). Préparation et caractérisation de matériaux pour l'effet gasochrome [Master’s dissertation, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/7441

Contacter ORBi UMONS