  | Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 May 2021). On the selection of an empirical material constitutive model for the finite element modeling of Ti6Al4V orthogonal cutting, including the segmented chip formation. International Journal of Material Forming, 4 (3), 361 - 374. doi:10.1007/s12289-020-01535-2  Peer reviewed vérifié par ORBi |
Leroy, C., Rivière, E., Ducobu, F., Lavernhe, S., Tournier, C., & Filippi, E. (02 July 2019). Performance simulation of different toolpaths in 2D1/2 pocket milling. AIP Conference Proceedings, 2113. doi:10.1063/1.5112609 Peer reviewed vérifié par ORBi |
Roland, F., Filippi, E., & Bette, S. (2019). Pecha Kucha Night IoT : Fab-IoT-Lab. |
  | Demarbaix, A., Rivière, E., Ducobu, F., Filippi, E., Petit, F., & Juste, E. (2019). Calibration method of hybrid machining process in the green ceramic combining micro-milling and laser machining. European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019, 76-77. Peer reviewed |
Leroy, C., Rivière, E., Ducobu, F., Lavernhe, S., Tournier, C., & Filippi, E. (08 May 2019). Performance simulation of different toolpaths in 2D1/2 pocket milling [Paper presentation]. 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019. |
 | Roland, F., Filippi, E., Moeyaert, V., & Bette, S. (2019). Fab-IoT-Lab: Technological Expertise Guidance and Prototyping Skills in a Single Place [Paper presentation]. World Forum on Internet of Things, Limerick, Ireland. |
 | Demarbaix, A., & Filippi, E. (2019). Au pays des 'fablabs': A Mons, on veut susciter l'intérêt pour l'Internet des objets. Journal la Libre. |
Demarbaix, A., Dehombreux, P., & Filippi, E. (15 March 2019). FabLab Mons: Un outil pédagogique [Poster presentation]. 3ème Journée des Enseignants de l'UMONS, Mons, Belgium. |
 | Roland, F., Debauche, O., Filippi, E., & Bette, S. (05 March 2019). Geolocation of Tools on Construction Sites and LoRa Performance [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium. |
 | Demarbaix, A., Dehombreux, P., & Filippi, E. (05 March 2019). FabLab Mons: Un outil à la recherche [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium. |
 | Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (03 July 2018). Hybrid machining of Ceramic: Combination sequential milling and laser machining [Poster presentation]. The 5th Researchers' Workshop of the Materials Research Institute, Mons, Belgium. |
 | Roland, F., Bette, S., & Filippi, E. (03 July 2018). Fab-IoT-Lab: a Fab-IoT-Lab to support IoT projects of industries and entrepreneurs [Poster presentation]. Journée IIoT, Strasbourg, France. |
Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (2018). Functionalization of Electron BeamMelting parts in order to guide finishing operations [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/23478 |
 | Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (07 February 2018). Behaviour of pre-sintered Y-TZP during machining operations: Determination of recommended cutting parameters. Journal of Manufacturing Processes, 32, 85-92. doi:10.1016/j.jmapro.2018.01.020 Peer reviewed |
 | Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (16 October 2017). Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters. AIP Conference Proceedings, 1896. doi:10.1063/1.5008036 Peer reviewed |
 | Ducobu, F., Rivière, E., & Filippi, E. (05 September 2017). Reduction of the mesh size influence on the results of a lagrangian finite element machining model. Proceedings of the 14th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2017, 2017, 226-234. Peer reviewed |
Ducobu, F., Rivière, E., & Filippi, E. (01 September 2017). REDUCTION OF THE MESH SIZE INFLUENCE ON THE RESULTS OF A LAGRANGIAN FINITE ELEMENT MACHINING MODEL [Paper presentation]. XIV International Conference on Computational Plasticity. Fundamentals and Applications, Barcelone, Spain. |
 | Ducobu, F., Rivière, E., & Filippi, E. (04 July 2017). Lagrangian Finite Element Machining Model with Damage: a Question of Size [Poster presentation]. The 4th Researchers' Workshop of the Materials Research Institute, Mons, Belgium. |
Ozcan, A., Rivière, E., Huynh, H., Ducobu, F., Filippi, E., & Verlinden, O. (04 July 2017). Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs [Poster presentation]. The 4th Researchers' Workshop of the Materials Research Institute, Mons, Belgium. |
 | Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 June 2017). Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters [Paper presentation]. workshop additive manufacturing, Louvain-la-Neuve, UCL, Belgium. Peer reviewed |
 | Ducobu, F., Pedro, A., Rivière, E., Ortiz De Zarate, G., Madariaga, A., & Filippi, E. (16 June 2017). The CEL method as an alternative to the current modelling approaches for Ti6Al4V orthogonal cutting simulation. Procedia CIRP, 58, 245-250. doi:10.1016/j.procir.2017.03.188 Peer reviewed vérifié par ORBi |
 | Ozcan, A., Rivière, E., Huynh, H., Ducobu, F., Verlinden, O., & Filippi, E. (15 June 2017). Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs. Procedia CIRP, 58, 239-244. doi:10.1016/j.procir.2017.03.187 Peer reviewed vérifié par ORBi |
Ozcan, A., Rivière, E., Huynh, H. N., Ducobu, F., Verlinden, O., & Filippi, E. (15 June 2017). Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs [Paper presentation]. 16th CIRP Conference on Modelling of Machining Operations, CIRP CMMO 2017. |
 | Ducobu, F., Rivière, E., & Filippi, E. (01 June 2017). Mesh influence in orthogonal cutting modelling with the Coupled Eulerian-Lagrangian (CEL) method. European Journal of Mechanics. A, Solids, 65, 324-335. doi:10.1016/j.euromechsol.2017.05.007 Peer reviewed vérifié par ORBi |
Ducobu, F., Arrazola, P., Rivière, E., Ortiz De Zarate, G., Madariaga, A., & Filippi, E. (01 June 2017). The CEL method as an alternative to the current modelling approaches for Ti6Al4V orthogonal cutting simulation [Paper presentation]. 16th CIRP Conference on Modelling of Machining Operations, Cluny, France. |
 | Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (30 May 2017). The Hybrid Machining of Ceramic The choice of production stage [Poster presentation]. euspen's 17th International Conference & Exhibition, Hanovre, Germany. |
 | Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., & Petit, F. (2017). The Hybrid Machining of Ceramic: The choice of production stage. Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, 111-112. Peer reviewed |
 | Ducobu, F., Rivière, E., & Filippi, E. (28 May 2017). Finite element modelling of 3D orthogonal cutting experimental tests with the Coupled Eulerian-Lagrangian (CEL) formulation. Finite Elements in Analysis and Design, 134, 27-40. doi:10.1016/j.finel.2017.05.010 Peer reviewed vérifié par ORBi |
 | Ducobu, F., Rivière, E., & Filippi, E. (01 May 2017). Experimental and numerical investigation of the uncut chip thickness reduction in Ti6Al4V orthogonal cutting. Meccanica, 52, 1577-1592. doi:10.1007/s11012-016-0499-7 Peer reviewed |
Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (26 April 2017). Influence on surface characteristics of electron beam melting process (EBM) by varying the process parameters [Paper presentation]. 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. |
Ozcan, A., Rivière, E., Ducobu, F., Filippi, E., Verlinden, O., & Huynh, H. (07 March 2017). Modélisation macroscopique d'usinage de poche en tenant compte des efforts de coupe et du contrôle [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium. |
 | Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (07 March 2017). Influence of process parameters on surface roughness of EBM [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgique, 2017, Mons, Belgium. |
Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (07 March 2017). The Hybrid Machining of Ceramic: The choice of production stage [Poster presentation]. 8e édition montoise du MdC2017, Mons, Belgium. |
 | Ducobu, F., Rivière, E., & Filippi, E. (07 March 2017). Lagrangian Finite Element Machining Model with Damage: a Question of Size [Poster presentation]. Mardi des Chercheurs (MdC2017), Mons, Belgium. |
 | Wattiaux, D., Verlinden, O., & Filippi, E. (07 March 2017). Utilisation du Prototypage virtuel et rapide dans le cadre du cours de Mécanique Rationnelle [Poster presentation]. Mardi des Chercheurs (MdC2017), Mons, Belgium. |
 | Ducobu, F., Rivière, E., & Filippi, E. (07 January 2017). On the importance of the choice of the parameters of the Johnson-Cook constitutive model and their influence on the results of a Ti6Al4V orthogonal cutting model. International Journal of Mechanical Sciences, 122, 143-155. doi:10.1016/j.ijmecsci.2017.01.004 Peer reviewed vérifié par ORBi |
 | Rivière, E., Letot, C., Ducobu, F., Dehombreux, P., & Filippi, E. (01 January 2017). Dynamic simulation of milling operations with small diameter milling cutters: effect of material heterogeneity on the cutting force model. Meccanica, 52 (1-2), 35-44. doi:s11012-016-0398-y Peer reviewed |
 | Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (19 October 2016). Effect of HIPping (Hot Isostatic Pressing) on Electron Beam Melting Ti6Al4V parts after machining. AIP Conference Proceedings, 1769. doi:10.1063/1.4963616 Peer reviewed |
Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2016). La nuit des chercheurs: L'usinage hybride: Combinaison séquentielle fraisage et usinage laser. |
 | Ducobu, F., Rivière, E., & Filippi, E. (01 September 2016). Application of the Coupled Eulerian-Lagrangian (CEL) method to the modeling of orthogonal cutting. European Journal of Mechanics. A, Solids, 59, 58-66. doi:10.1016/j.euromechsol.2016.03.008 Peer reviewed vérifié par ORBi |
 | Leroy, C., Rivière, E., & Filippi, E. (05 July 2016). Trajectoires curvilinéaires optimisées en longueur pour l'usinage de cavité avec îlot [Poster presentation]. 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium. |
Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (05 July 2016). Study of the functionalization of electron beam melting part through machining [Paper presentation]. 3rd Researcher's Day of the Materials Research Institute, University of Mons, Belgium. |
 | Ducobu, F., Rivière, E., & Filippi, E. (05 July 2016). CEL Modelling of Ti6Al4V Orthogonal Cutting [Poster presentation]. 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium. |
 | Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (05 July 2016). Hybrid machining on the Y-TZP ceramic: Combination of the milling and the laser machining [Poster presentation]. 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium. |
 | Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (2016). Characterization of electron beam melting process (EBM) : Capability approach. Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing. Peer reviewed |
Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 June 2016). Characterization of electron beam melting process (EBM) : Capability approach [Paper presentation]. ASPE/euspen 2016 Summer Topical Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing. |
Leroy, C., Rivière, E., & Filippi, E. (09 June 2016). Généralisation de la méthode de Bieterman aux cavités 2D1/2 avec îlots [Paper presentation]. MUGV 2016, Tours, France. |
 | Leroy, C., Rivière, E., & Filippi, E. (2016). Généralisation de la méthode de Bieterman aux cavités 2D1/2 avec îlots [Paper presentation]. MUGV 2016, Tours, France. |
 | Ozcan, A., Rivière, E., Filippi, E., Verlinden, O., & Huynh, H. (2016). Modélisation du mouvement dynamique d'une machine-outil à l'aide d'un logiciel de simulation dynamique multi-corps - Première approche [Paper presentation]. MUGV 2016, Tours, France. |
 | Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., Petit, F., & Preux, N. (2016). Development of the hybrid sequential machining: laser machining and milling. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. Peer reviewed |
Demarbaix, A., Rivière, E., Ducobu, F., Filippi, E., Petit, F., & Preux, N. (30 May 2016). Development of the hybrid sequential machining: Laser machining and milling [Poster presentation]. 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. |
 | Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 May 2016). Functionalization of Electron beam melting parts by Machining [Paper presentation]. workshop sur l'additive manufacturing, ULB (Bruxelles), Belgium. |
 | Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (18 May 2016). Concept of the hybrid machining: the laser machining and milling [Poster presentation]. Matinée des chercheurs, Université de Valenciennes et du Hainaut-Cambrésis, France. |
 | Dolimont, A., Rivière, E., & Filippi, E. (18 May 2016). Study of the functionalization of electron beam melting part through machining [Poster presentation]. Matinée des chercheurs, Valenciennes, Université de Valenciennes et du Hainaut Cambrésis, France. |
Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 April 2016). Effect of HIPping (Hot Isostatic Pressing) on electron beam melting Ti6Al4V parts after machining [Paper presentation]. 19th International ESAFORM Conference on Material Forming, ESAFORM 2016. |
 | Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2016). Ma thèse en 180 secondes: L'usinage hybride : Combinaison de deux procédés de fabrication par enlèvement de matière. |
 | Ducobu, F., Rivière, E., & Filippi, E. (01 March 2016). Material constitutive model and chip separation criterion influence on the modeling of Ti6Al4V machining with experimental validation in strictly orthogonal cutting condition. International Journal of Mechanical Sciences, 107, 136-149. doi:10.1016/j.ijmecsci.2016.01.008 Peer reviewed vérifié par ORBi |
 | Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (31 January 2016). Characterisation of electron beam melting process on Ti6Al4V in order to guide finishing operation. International Journal of Rapid Manufacturing, 5 (3/4). Peer reviewed |
 | Dolimont, A., Michotte, S., De Formanoir, C., Rivière, E., Ducobu, F., Godet, S., & Filippi, E. (02 December 2015). L'impact des traitements thermiques et CIC sur la microstructure et les propriétés mécaniques des pièces en TA6V par EBM et contrôle géométrique du procédé pour guider l'usinage [Paper presentation]. A3TS: POST FABRICATION ADDITIVE : QUELS TRAITEMENTS DE FINITION ?, UTBM Sevenans (90), France. |
 | Ducobu, F., Rivière, E., & Filippi, E. (27 July 2015). Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine. International Journal of Material Forming, 8 (3), 455-468. doi:10.1007/s12289-014-1189-4 Peer reviewed vérifié par ORBi |
 | Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (30 June 2015). A first step to study numerically the tool wear influence in Ti6Al4V orthogonal cutting [Poster presentation]. 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium. |
Dolimont, A., Rivière, E., & Filippi, E. (30 June 2015). Metrological analysis of electron beam melting process (EBM) [Poster presentation]. 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium. |
Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (30 June 2015). LAMAC: Usinage laser sur de la céramique « crue » [Poster presentation]. The 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium. |
 | Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (11 June 2015). Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining. Procedia CIRP, 31, 124-129. doi:10.1016/j.procir.2015.03.056 Peer reviewed vérifié par ORBi |
Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 June 2015). Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining [Paper presentation]. 15th CIRP Conference on Modelling of Machining Operations, Karlsruhe, Germany. |
Filippi, E., & Lesage, A. (2015). Conception d'un nouveau véhicule de 3e génération 'Urban Concept' - Concours Shell Eco-Marathon, Reportage Journal Télévision RTL-TVI. |
Filippi, E., & Lesage, A. (2015). Conception d'un nouveau véhicule de 3e génération 'Urban Concept' - Concours Shell Eco-Marathon, Reportage Journal Télévisé de la RTBF. |
Filippi, E., Verlinden, O., & Chariot, C. (2015). 'Eurobot 2015: Robomovies - Ultime répétition des robots, Reportage Journal Télévision RTBF. |
 | Rivière, E., Letot, C., Ducobu, F., & Filippi, E. (17 April 2015). Uncertainty management of cutting forces parameters and its effects on machining stability. Key Engineering Materials, 651-653, 1165-1170. doi:10.4028/www.scientific.net/KEM.651-653.116 Peer reviewed vérifié par ORBi |
Filippi, E., Verlinden, O., & Chariot, C. (2015). Eurobot 2015: Robomovies - Ultime répétition des robots, RTBF Info Régions. |
Filippi, E., Verlinden, O., & Chariot, C. (2015). Eurobot 2015: Robomovies - Ultime répétition des robots, Reportage Journal Télévisé TéléMB'. |
 | Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (15 April 2015). Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling. Key Engineering Materials, 651-653, 1197-1203. doi:10.4028/www.scientific.net/KEM.651-653.1197 Peer reviewed vérifié par ORBi |
Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 April 2015). Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling [Paper presentation]. Esaform 2015, Graz, Austria. |
 | Ducobu, F., Rivière, E., & Filippi, E. (01 April 2015). On the introduction of adaptive mass scaling in a finite element model of Ti6Al4V orthogonal cutting. Simulation Modelling Practice and Theory, 53, 1-14. doi:10.1016/j.simpat.2015.02.003 Peer reviewed vérifié par ORBi |
Rivière, E., Letot, C., Ducobu, F., & Filippi, E. (01 April 2015). Uncertainty management of cutting forces parameters and its effects on machining stability [Paper presentation]. 18th International ESAFORM Conference on Material Forming, ESAFORM 2015. |
Leroy, C., Rivière, E., & Filippi, E. (10 March 2015). Résoudre l'équation de Poisson pour générer des trajectoires d'usinage fluides. Cas des cavités avec îlot [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium. |
Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2015). Les trajectoires en usinage laser: Modèle thermique pour controller le taux de matière ablaté. |
Dolimont, A., Rivière, E., & Filippi, E. (10 March 2015). Characterization of electron beam melting process (EBM) in order to enhance finishing operations [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium. |
 | Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (10 March 2015). Comparaison de deux technologies de fabrication dans la céramique dentaire : usinage laser et micro-fraisage [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium. |
 | Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (10 March 2015). A numerical model to study the tool wear influence in Ti6Al4V orthogonal cutting [Poster presentation]. Matinée des chercheurs (MDC2015), Mons, Belgium. |
Leroy, C., Rivière, E., & Filippi, E. (16 October 2014). Trajectoires curvilinéaires pour l'usinage de cavités avec îlot: une première approche [Paper presentation]. MUGV 2014, Clermont-Ferrand, France. |
 | Leroy, C., Rivière, E., & Filippi, E. (2014). TRAJECTOIRES CURVILINEAIRES POUR L'USINAGE DE CAVITES AVEC ÎLOT: UNE PREMIERE APPROCHE [Paper presentation]. MUGV 2014, Clermont-Ferrand, France. |
 | Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., Petit, F., & Preux, N. (2014). TRAJECTORIES IN LASER MACHINING CERAMICS: THERMAL MODEL TO CONTROL MATERIAL REMOVE RATE [Paper presentation]. Eleventh International Conference on High Speed Machining, Prague, Czechia. |
 | Dolimont, A., Rivière, E., & Filippi, E. (2014). ANALYSIS OF MACHINING CONFIGURATIONS WITH BALL-END MILLS IN ORDER TO FINISH PARTS MADE BY EBM AND COMPARISON WITH NUMERICAL MODEL. Proceedings of the eleventh international conference on high speed machining (HSM 2014). |
 | Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (02 July 2014). Modèle thermique par éléments finis de différentes trajectoires en usinage laser [Poster presentation]. 1st Researcher's Day of the Materials Research Institute, Mons, Belgium. |
Dolimont, A., Rivière, E., & Filippi, E. (02 July 2014). Analysis of machining configurations with ball-end mills in order to finish parts made by EBM and comparison with numerical model [Poster presentation]. 1st Researcher's Day of the Materials Research Institute, Mons, Belgium. |
 | Ducobu, F., Rivière, E., & Filippi, E. (02 July 2014). Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine [Poster presentation]. 1st Research Day of the Materials Research Institute, Mons, Belgium. |
 | Leroy, C., Rivière, E., & Filippi, E. (01 July 2014). Trajectoires curvilinéaires pour l'usinage de cavités avec îlot: une première approche [Poster presentation]. Journée des chercheurs de l'Institut Matériaux, Mons, Belgium. |
 | Rivière, E., Filippi, E., & Dehombreux, P. (2014). Construction des machines et procédés de fabrication : Notes de cours. |
 | Ducobu, F., Rivière, E., & Filippi, E. (01 April 2014). Numerical contribution to the comprehension of saw-toothed Ti6Al4V chip formation in orthogonal cutting. International Journal of Mechanical Sciences, 81, 77-87. doi:10.1016/j.ijmecsci.2014.02.017 Peer reviewed vérifié par ORBi |
 | Ducobu, F., Rivière, E., & Filippi, E. (26 September 2013). Experimental contribution to the comprehension of Ti6Al4V saw-toothed chip formation in orthogonal cutting [Poster presentation]. Tenth International Conference on High Speed Machining, Darmstadt, Germany. |
 | Ducobu, F., Rivière, E., & Filippi, E. (25 July 2013). Chip Formation in Micro-cutting. Journal of Mechanics Engineering and Automation, 3, 441-448. Peer reviewed |
Chariot, C., Filippi, E., & Verlinden, O. (2013). CPG tuning using sensory feedback for walking applications [Paper presentation]. ECCOMAS Multibody Dynamics 2013, Zagreb, Croatia. |
 | Ducobu, F., Rivière, E., & Filippi, E. (13 June 2013). Influence of the Material Behavior Law and Damage Value on the Results of an Orthogonal Cutting Finite Element Model of Ti6Al4V. Procedia CIRP, 8, 378-383. doi:10.1016/j.procir.2013.06.120 Peer reviewed vérifié par ORBi |
Ducobu, F., Rivière, E., & Filippi, E. (01 June 2013). Influence of the Material Behavior Law and Damage Value on the Results of an Orthogonal Cutting Finite Element Model of Ti6Al4V [Paper presentation]. CIRP Conference on Modeling of Machining Operations, Turin, Italy. |
 | Rivière, E., Filippi, E., & Dehombreux, P. (21 April 2013). Numerical simulation of machining operations on flexible parts. Key Engineering Materials, 554-557, 1984-1991. doi:10.4028/www.scientific.net/KEM.554-557.1984 Peer reviewed vérifié par ORBi |
Rivière, E., & Filippi, E. (18 April 2013). Approche macroscopique de l'usinage des métaux : techniques expérimentales et apport de la simulation [Paper presentation]. Journée thématique: 'L'usinage des matériaux: de la compréhension des mécanismes aux applications', Mons, Belgium. |
 | Ducobu, F., Rivière, E., & Filippi, E. (18 April 2013). Approche mésoscopique pour l'étude numérique et expérimentale des mécanismes de coupe macroscopique et microscopique [Paper presentation]. Journée thématique: 'L'usinage des matériaux: de la compréhension des mécanismes aux applications', Mons, Belgium. |
 | Ducobu, F., Rivière, E., & Filippi, E. (26 March 2013). A Lagrangian Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V [Paper presentation]. SIMULIA Academic Seminar 2013, Mons, Belgium. |
 | Leroy, C., Rivière, E., & Filippi, E. (12 March 2013). Optimisation de l'usinage de cavités par fraisage [Poster presentation]. Matinée des chercheurs ( MDC'2013), Mons, Belgium. |
Chariot, C., Filippi, E., & Verlinden, O. (12 March 2013). Mutlibody Simulation of Modular Robots with EasyDyn: Gait Tuning using sensory Feedback [Poster presentation]. Matinée des chercheurs, Mons, Belgium. |
Dolimont, A., Rivière, E., & Filippi, E. (12 March 2013). Finition des pièces mécaniques à la sortie d'une production additive [Poster presentation]. 7ème édition de la Matinée de Chercheurs, Mons, Belgium. |
 | Ducobu, F., Rivière, E., & Filippi, E. (06 March 2013). Experimental contribution to the comprehension of Ti6Al4V saw-toothed chip formation mechanisms in orthogonal cutting [Poster presentation]. Matinée des Chercheurs 2013, Mons, Belgium. |
 | Ducobu, F., Rivière, E., & Filippi, E. (2012). Chip Formation in Micro-cutting [Paper presentation]. 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium. |
 | Chariot, C., Filippi, E., & Verlinden, O. (2012). Simulation framework of modular robots using EasyDyn [Paper presentation]. 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium. |
Ducobu, F., Rivière, E., & Filippi, E. (01 May 2012). Chip Formation in Microcutting [Paper presentation]. 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium. |
 | Ducobu, F., Rivière, E., & Filippi, E. (15 March 2012). Dynamic simulation of the micro-milling process including minimum chip thickness. Key Engineering Materials, 504-506, 1269-1274. doi:10.4028/www.scientific.net/KEM.504-506.1269 Peer reviewed vérifié par ORBi |
Ducobu, F., Rivière, E., & Filippi, E. (14 March 2012). Dynamic simulation of the micro-milling process including minimum chip thickness [Paper presentation]. 15th Conference of the European Scientific Association on Material Forming, ESAFORM 2012. |
Chariot, C., Filippi, E., & Verlinden, O. (2011). Multibody Simulation of Modular Robots: Performances and feasibility of simplified 6-legged and caterpillar gaits [Paper presentation]. ECCOMAS Multibody Dynamics 2011, UCL, Brussels, Belgium. |
Ducobu, F., Rivière, E., & Filippi, E. (01 June 2011). A Lagrangian FEM Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V [Paper presentation]. CIRP conference on modelling of machining operations, Sintra, Portugal. |
 | Ducobu, F., Rivière, E., & Filippi, E. (12 May 2011). A Lagrangian FEM Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V. Advanced Materials Research, 223, 3-11. doi:10.4028/www.scientific.net/AMR.223.3 Peer reviewed |
Rivière, E., Filippi, E., & Dehombreux, P. (2011). Experimental investigation of parameter-dependent analytical cutting force models for the simulation of the milling process [Paper presentation]. Esaform 2011, Queen's University, Belfast, Unknown/unspecified. doi:10.1063/1.3589577 |
Rivière, E., Filippi, E., & Dehombreux, P. (07 April 2011). Experimental study of parameter-dependent analytical cutting force model [Paper presentation]. Matinée des chercheurs, UMONS, Belgium. |
Chariot, C., Filippi, E., & Verlinden, O. (22 March 2011). Locomotion Simulation of Self-Reconfigurable Robots [Poster presentation]. Matinée des Chercheurs, UMons, Belgium. |
 | Ducobu, F., Rivière, E., & Filippi, E. (22 March 2011). Simulation de la formation d'un copeau dentelé de Ti6Al4V en coupe orthogonale par la méthode aux éléments finis [Poster presentation]. 6ème édition de la Matinée des Chercheurs (MDC 2011), Mons, Belgium. |
 | Ducobu, F., Rivière, E., & Filippi, E. (2010). An ALE Model to Study the Depth of Cut Influence on Chip Formation in Orthogonal Cutting [Paper presentation]. Eighth International Conference on High Speed Machining, Metz, France. |
Ducobu, F., Rivière, E., & Filippi, E. (01 December 2010). An ALE Model to Study the Depth of Cut Influence on Chip Formation in Orthogonal Cutting [Paper presentation]. Eighth International Conference on High Speed Machining, Metz, France. |
Ducobu, F., Rivière, E., & Filippi, E. (15 March 2010). Orthogonal Cutting Simulations with Abaqus/Explicit - Current results [Paper presentation]. Simulia Academic Seminar 2010, Leuven, Belgium. |
 | Ducobu, F., Filippi, E., & Rivière, E. (17 February 2010). Simulation de la coupe orthogonale du Ti6Al4V par la méthode aux éléments finis [Poster presentation]. Matinée des Chercheurs, Bruxelles, Belgium. |
 | Basile, O., Dehombreux, P., & Filippi, E. (2009). On the Reliability of Mechanical Systems under Variable Constraints. In Recent Advances in Maintenance and Infrastructure Management (pp. 21-34). Springer. |
Ducobu, F., Rivière, E., & Filippi, E. (31 August 2009). Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale [Paper presentation]. 19ème Congrès Français de Mécanique, Marseille, France. |
 | Ducobu, F., Filippi, E., & Rivière, E. (2009). Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale [Paper presentation]. Congrès Français de mécanique, Marseille, France. |
 | Ducobu, F., Filippi, E., & Rivière, E. (2009). Investigations on chip formation in micro-milling. Laser Metrology and Machine Performance IX - 9th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2009, 327-336. Peer reviewed |
Ducobu, F., Filippi, E., & Rivière, E. (30 June 2009). Investigations on chip formation in micro-milling [Paper presentation]. International Conference and Exhibition on Laser metrology, machine tool, CMM and robotic performance (LAMDAMAP 2009), Teddington, United Kingdom. |
 | Ducobu, F., Filippi, E., & Rivière, E. (2009). Chip formation in micro-milling [Paper presentation]. National Congress of Theoretical and Applied Mechanics, VUB, Brussels, Belgium. |
 | Chariot, C., Filippi, E., & Verlinden, O. (2009). The interest of CPG's for locomotion control of self-reconfigurable robots [Paper presentation]. National Congress of Theoretical and Applied Mechanics, VUB, Brussels, Belgium. |
 | Ducobu, F., Filippi, E., & Rivière, E. (2009). Chip Formation and Minimum Chip Thickness in Micro-milling [Paper presentation]. CIRP conference on modelling of machining operations, San Sebastian, Spain. |
Ducobu, F., Filippi, E., & Rivière, E. (01 May 2009). Chip Formation in Micromilling [Paper presentation]. 8th National Congress on Theoretical and Applied Mechanics, Bruxelles, Belgium. |
Ducobu, F., Filippi, E., & Rivière, E. (01 May 2009). Chip Formation and Minimum Chip Thickness in Micro-milling [Poster presentation]. 12th CIRP conference on modelling of machining operations, San Sebastian, Spain. |
Rivière, E., Filippi, E., & Dehombreux, P. (15 April 2009). Identification de modèles d'efforts de coupe en fraisage [Poster presentation]. Lab' insight, Louvain-la-Neuve, Belgium. |
 | Ducobu, F., Filippi, E., & Rivière, E. (17 March 2009). Chip Formation and Minimum Chip Thickness in Micro-milling [Poster presentation]. Matinée des chercheurs 2009, Mons, Belgium. |
Chariot, C., Filippi, E., & Verlinden, O. (17 March 2009). The interest of CPG's for locomotion control of self-reconfigurable robots [Poster presentation]. Matinée des chercheurs 2009, Mons, Belgium. |
 | Rivière, E., & Filippi, E. (19 January 2009). Mechanistic cutting force model parameters evaluation in milling taking cutter radial runout into account. International Journal of Advanced Manufacturing Technology, 45 (1-2), 8-15. doi:10.1007/s00170-009-1943-9 Peer reviewed vérifié par ORBi |
Ducobu, F., Filippi, E., & Rivière, E. (05 November 2008). Phénomènes de coupe en micro-fraisage par enlèvement de copeaux [Paper presentation]. Les thématiques de recherche du Pôle Matériaux en usinage par outils de coupe, Mons, Belgium. |
 | Rivière, E., Barboza, J., Filippi, E., & D'Alvise, L. (2008). Cutting forces evaluation in milling using an analytical finite element mixed approach [Paper presentation]. 11th CIRP conference on modelling of machining operations, Gaithersburgh, United States. |
 | Ducobu, F., Filippi, E., & Rivière, E. (26 February 2008). Etude du phénomène de coupe en micro-fraisage par enlèvement de copeaux [Poster presentation]. Matinée des Chercheurs 2008, Bruxelles, Belgium. |
 | Rivière, E., de Arizon, J., Filippi, E., & Dehombreux, P. (2007). Cutting forces parameters evaluation in milling using genetic algorithm [Paper presentation]. 10th CIRP International Workshop on Modeling of Machining Operations, Scilla, Reggio Calabria, Italy. |
Rivière, E., Filippi, E., & Dehombreux, P. (12 March 2007). Etude et simulation des procédés d'usinage à grande vitesse [Poster presentation]. Matinée de Chercheurs de la Faculté Polytechnique de Mons, Mons, Belgium. |
 | Rivière, E., Filippi, E., & Dehombreux, P. (12 February 2007). Inverse method for cutting forces parameters evaluation. Engineering Mechanics: Journal for Theoretical and Applied Mechanics, 14 (5), 1-13. Peer reviewed |
 | Rivière, E., Filippi, E., & Dehombreux, P. (01 January 2007). Chatter prediction using dynamic simulation. International Review of Mechanical Engineering, 1 (1), 78-86. Peer reviewed vérifié par ORBi |
 | Rivière, E., Stalon, V., Vandenabeele, O., Filippi, E., & Dehombreux, P. (2006). Chatter detection using a microphone [Paper presentation]. NCTAM 2006 (mai), . |
 | Rivière, E., Filippi, E., & Dehombreux, P. (2006). Forces, vibrations and roughness prediction in milling using dynamic simulation [Paper presentation]. NCTAM 2006 (mai), . |
 | Wattiaux, D., Verlinden, O., Conti, C., Filippi, E., & Tamigniaux, P. (2006). Prediction of the dynamic behaviour of electromagnetic relays submitted to mechanical shocks [Paper presentation]. 7th National Congress on Theoretical and Applied Mechanics, Mons, Belgium. |
Rivière, E., Filippi, E., & Dehombreux, P. (16 May 2006). Forces, vibrations and roughness prediction in milling using dynamic simulation [Paper presentation]. 7th National Congress on theoretical and applied Mechanics (NCTAM 2006), Mons, Belgium. |
Rivière, E., Stalon, V., Vandenabeele, O., Filippi, E., & Dehombreux, P. (16 May 2006). Chatter detection using a microphone [Paper presentation]. 7th National Congress on theoretical and applied Mechanics (NCTAM 2006), Mons, Belgium. |
 | Rivière, E., Filippi, E., & Dehombreux, P. (2006). Forces, vibrations and roughness prediction in milling using dynamic simulation [Paper presentation]. Cinquième Conférence Internationale sur l'usinage à grande vitesse (HSM 2006), Metz, France. |
Kenda, R., Conti, C., Wu, Y., & Filippi, E. (1996). Updating methods applied to spatial electronic equipments [Paper presentation]. International Conference on Noise and Vibration Engineering, Leuven, Belgium. |
Kenda, R., Conti, C., Wu, Y., & Filippi, E. (1996). Updating methods applied to spatial electronic structures [Paper presentation]. Conference on Spacecraft Structures, Materials and Mechanical Testing, Noordwijck, Netherlands. |
Conti, C., Lybaert, P., & Filippi, E. (1995). Prise en compte de contraintes d'environnement d'ordre thermique et vibratoire sur la conception de matériel électronique embarqué [Paper presentation]. Congrès Sciences et Technologies d'environnement, Leuven, Belgium. |
Kenda, R., Wu, Y., Conti, C., & Filippi, E. (1995). Updating methods applied to electronic structures [Paper presentation]. International Congress MV2 on the New Advances in Modal Synthesis of Large Structures, Lyon, France. |