Sun S., Zheng Q., Li D., Wen J. Long-term atmospheric corrosion behaviour of aluminium alloys 2024 and 7075 in urban, coastal and industrial environments. Corros. Sci. 2009, 51:719-727.
Cui F., Preseul-Moreno F.J., Kelly R.G. Experimental and computational evaluation of the protection provided by an aluminum cladding to AA2024-T3 exposed at a seacoast environment. Corrosion 2006, 62:251-263.
Garcia-Garcia F.J., Skeldon P., Thompson G.E., Smith G.C. The effect of nickel on alloy microstructure and electrochemical behaviour of AA1050 aluminium alloy in acid and alkaline solutions. Electrochim. Acta 2012, 75:229-238.
Amor M.P., Ball J. The mechanism of electrograining aluminium sheet in nitric/boric acid electrolyte. Corros. Sci. 1998, 40:2155-2172.
Schneider M., Galle K. Investigation of the initial stage of crevice corrosion on Al99.5 by electrochemical noise analysis. Mater. Corros. 2007, 58:983-991.
Birbilis N., Bucheit R.G. Electrochemical characteristics of intermetallics phases in aluminium alloys. experimental survey and discussion. J. Electrochem. Soc. 2005, 152:B140-B151.
Andreatta F., Druart M.-E., Lanzutti A., Lekka M., Cossement D., Olivier M.-G., Fedrizzi L. Localized corrosion inhibition by cerium species on clad AA2024 aluminium alloy investigated by means of electrochemical micro-cell. Corros. Sci. 2012, 65:376-386.
Yasakau K.A., Zheludkevich M.L., Lamaka S.V., Ferreira M.G.S. Mechanism of corrosion inhibition of AA2024 by rare earth compounds. J. Phys. Chem. B 2006, 110:5515-5528.
Yasakau K.A., Zheludkevich M.L., Karavai O.V., Ferreira M.G.S. Influence of inhibitor addition on the corrosion protection performance of sol-gel coatings on AA2024. Prog. Org. Coat. 2008, 63:352-361.
Cabral A.M., Trabelsi W., Serra R., Montemor M.F., Zheludkevich M.L., Ferreira M.G.S. The corrosion resistance of hot dip galvanised steel and AA2024-T3 pre-treated with bis-[triethoxysilylpropyl]tetrasulfide solutions doped with Ce(NO3)3. Corros. Sci. 2006, 48:3740-3758.
Tamborim S.M., Maisonnave A.P.Z., Azambuja D.S., Englert G.E. An electrochemical and superficial assessment of the corrosion behavior of AA2024-T3 treated with metacryloxypropylmethoxysilane and cerium nitrate. Surf. Coat. Technol. 2008, 202:5991-6001.
Davenport A.J., Isaacs H.S., Kending M.W. XANES investigation of the role of cerium compounds as corrosion inhibitors for aluminum. Corros. Sci. 1991, 32:653-663.
Garcia S.J., Muster T.H., Ozkanat O., Sherman N., Hughes A.E., Terryn H. The influence of pH on corrosion inhibitor selection for 2024-T3 aluminium alloy assessed by high-throughput multielectrode and potentiodynamic testing. Electrochim. Acta 2010, 55:2457-2465.
Rosero-Navarro N.C., Curioni M., Bingham R., Duran A., Aparicio M., Cottis R.A., Thompson G.E. Electrochemical techniques for practical evaluation of corrosion inhibitor effectiveness. Performance of cerium nitrate as corrosion inhibitor for AA2024-T3 alloy. Corros. Sci. 2010, 52:3356-3366.
Muster T.H., Sullivan H., Lau D., Alexander D.L.J., Sherman N., Garcia S.J., Harvey T.G., Markley T.A., Hughes A.E., Corrigan P.A., Glenn A.M., White P.A., Hardin S.G., Mardel J., Mol J.M.C. A combinatorial matrix of rare earth chloride mixtures as corrosion inhibitors of AA2024-T3: optimisation using potentiodynamic polarisation and EIS. Electrochim. Acta 2012, 67:95-103.
Yasakau K.A., Zheludkevich M.L., Ferreira M.G.S. Lanthanide salts as corrosion inhibitors for AA5083. corrosion inhibition. J. Electrochem. Soc. 2008, 155:C169-C177.
Yasakau K.A., Tedim J., Zheludkevich M.L., Drumm R., Shem M., Wittmar M., Veith M. Cerium molybdate nanowires for active corrosion protection of aluminium alloys. Corros. Sci. 2012, 58:41-51.
Paussa L., Andreatta F., De Felicis D., Bemporad E., Fedrizzi L. Investigation of AA2024-T3 surfaces modified by cerium compounds: a localized approach. Corros. Sci. 2014, 78:215-222.
Catubig R., Hughes A.E., Cole I.S., Hinton B.R.W., Forsyth M. The use of cerium and praseodymium mercaptoacetate as thiol-containing inhibitors for AA2024-T3. Corros. Sci. 2014, 81:45-53.
Karavai O.V., Bastos A.C., Zheludkevich M.L., Taryba M.G., Lamaka S.V., Ferreira M.G.S. Localized electrochemical study of corrosion inhibition in microdefects on coated AZ31 magnesium alloy. Electrochim. Acta 2010, 55:5401-5406.
Bohm S., McMurray H.N., Powell S.M., Worsley D.A. Photoelectrochemical investigation of corrosion using scanning electrochemical techniques. Electrochim. Acta 2000, 45:2165-2174.
Williams G., McMurray H.N., Grace R. Inhibition of magnesium localised corrosion in chloride containing electrolyte. Electrochim. Acta 2010, 55:7824-7833.
Aldykewicz A.J., Isaacs H.S., Davenport A.J. The investigation of cerium as a cathodic inhibitor for aluminium-copper alloys. J. Electrochem. Soc. 1995, 142:3342-3350.
Ogle K., Baudu V., Garrigues L., Pilippe X. Localized electrochemical methods applied to cut edge corrosion. J. Electrochem. Soc. 2000, 147:3654-3660.
Hamlaoui Y., Pedraza F., Remazeilles C., Cohendoz S., Rebere C., Tifouti L., Creus J. Cathodic electrodeposition of cerium-based oxides on carbon steel from concentrated cerium nitrate solutions Part I. Electrochemical and analytical characterisation. Mater. Chem. Phys. 2009, 113:650-657.
Matter E.A., Kozhukharov S., Machkova M., Kozhukharov V. Comparaison between the inhibition efficiencies of Ce(III) and Ce(IV) ammonium nitrates against corrosion of AA2024 aluminium alloy in solutions of low chloride concentration. Corros. Sci. 2012, 62:22-33.
Machkova M., Matter E.A., Kozhukharov S., Kozhukharov V. Effect of the anionic part of various Ce(III) salts on the corrosion inhibition efficiency of AA2024 aluminium alloy. Corros. Sci. 2013, 69:396-405.
Mishra A.K., Balasubramaniam R. Corrosion inhibition of aluminium by rare earth chlorides. Mater. Chem. Phys. 2007, 103:385-393.
Bethencourt M., Botana F.J., Calvino J.J., Marcos M., Rodriguez-Chacon M.A. Lanthanide compounds as environmentally-friendly corrosion inhibitors of aluminium alloys: a review. Corros. Sci. 1998, 40:1803-1819.
Bastos A.C., Zheludkevich M.L., Ferreira M.G.S. Concerning the efficiency of corrosion inhibitors as given by SVET. Portugaliae Electrochim. Acta 2008, 26:47-54.
Isaacs H.S. The effect of height on the current distribution measured with a vibrating electrode probe. J. Electrochem. Soc. 1991, 138:722-728.
Zlatev R., Valdez B., Stoytcheva M., Ramos R., Kiyota S. Solution conductivity influence on pitting corrosion studies by SVET. Int. J. Electrochem. Sci. 2011, 6:2746-2757.
Hayase M., Hatsuzawa T., Fukuizumi A. Electric field analysis in a dilute solution for the vibrating electrode technique. J. Electroanal. Chem. 2002, 537:173-181.
Wilson B.J., Searle J.R., Yliniemi K., Worsley D.A., McMurray H.N. Effect of probe tip inclination on the response of the scanning vibrating electrode technique to an idealised pit-like feature. Electrochim. Acta 2012, 66:52-60.
Akid R., Garma M. Scanning vibrating reference electrode technique: a calibration study to evaluate the optimum operating parameters for maximum signal detection of point source activity. Electrochim. Acta 2004, 49:2871-2879.
McMurray H.N., Williams D., Worsley D.A. Artifacts induced by large amplitude probe vibrations in localized corrosion measured by svet. J. Electrochem. Soc. 2003, 150:B567-B573.
Suter T., Alkire R.C. Microelectrochemical studies of pit initiation at single inclusions in Al2024-T3. J. Electrochem. Soc. 2001, 148:B36-B42.
Andreatta F., Lohrengel M.M., Terryn H., de Wit J.H.W. Electrochemical characterisation of aluminium AA7075-T6 and solution heat treated AA7075 using a micro-capillary cell. Electrochim. Acta 2003, 48:3239-3247.
Andreatta F., Terryn H., de Wit J.H.W. Corrosion behaviour of different tempers of AA7075 aluminium alloy. Electrochim. Acta 2004, 49:2851-2862.
Birbilis N., Bucheit R.G. Investigation and discussion of characteristics for intermetallic phases common to aluminum alloys as a function of solution pH. J. Electrochem. Soc. 2008, 155:C117-C126.
Eckermann F., Suter T., Uggowitzer P.J., Afseth A., Schmutz P. The influence of MgSi particle reactivity and dissolution processes on corrosion in Al-Mg-Si alloys. Electrochim. Acta 2008, 54:844-855.
Ralston K.D., Young T.L., Bucheit R.G. Electrochemical evaluation of constituent intermetallics in aluminium alloy 2024-T3 exposed to aqueous vanadate inhibitors. J. Electrochem. Soc. 2009, 156:C135-C146.
Birbilis N., Buchheit R.G., Ho D.L., Forsyth M. Inhibition of AA2024-T3 on a phase-by-phase basis using an environmentally benign inhibitor, cerium dibutyl phosphate. Electrochem. Solid Sate Lett. 2005, 8:C180-C183.
Paussa L., Andretta F., Rosero-Navarro N.C., Duran A., Fedrizzi L. Study of the effect of cerium nitrate on AA2024-T3 by means of electrochemical micro-cell technique. Electrochim. Acta 2012, 70:25-33.
Mouanga M., Puiggali M., Tribollet B., Vivier V., Pebere N., Devos O. Galvanic corrosion between zinc and carbon steel investigated by local electrochemical impedance spectroscopy. Electrochim. Acta 2013, 88:6-14.
Lacroix L., Blanc C., Pebere N., Tribollet B., Vivier V. Localized approach to galvanic coupling in an aluminium-magnesium system. J. Electrochem. Soc. 2009, 158:C259-C265.
Jorcin J.B., Blanc C., Pebere N., Tribollet B., Vivier V. Galvanic coupling between pure copper and pure aluminium: experimental approach and mathematical model. J. Electrochem. Soc. 2008, 155:C46-C51.
Olivier M., Lanzutti A., Motte C., Fedrizzi L. Influence of oxidizing ability of the medium on the growth of lanthanide layers on galvanized steel. Corros. Sci. 2010, 52:1428-1439.
Vuillemin B., Philippe X., Oltra R., Vignal V., Coudreuse L., Dufour L.C., Finot E. SVET, AFM and AES study of pitting corrosion initiated on MnS inclusions by microinjection. Corros. Sci. 2003, 45:1143-1159.
Thebault F., Vuillemin B., Oltra R., Allely C., Ogle K. Reliability of numerical models for simulating galvanic corrosion processes. Electrochim. Acta 2012, 82:349-355.
Thebault F., Vuillemin B., Oltra R., Ogle K., Allely C. Investigations of self-healing mechanism on galvanized steels cut edges by coupling SVET and numerical modeling. Electrochim. Acta 2008, 53:5226-5234.
Yan M., Gelling V.J., Hinderliter B.R., Battocchi D., Tallman D.E. SVET method for characterizing anti-corrosion performance of metal-rich coatings. Corros. Sci. 2010, 52:2636-2642.
Deshpande K.B. Effect of aluminium spacer on galvanic corrosion between magnesium and mild steel using numerical model and SVET experiments. Corros. Sci. 2012, 62:184-191.
Deshpande K.B. Experimental investigation of galvanic corrosion: comparison between SVET and immersion techniques. Corros. Sci. 2010, 52:2819-2826.
Trinh D., Ducharme P.D., Tefashe U.M., Kish J.R., Mauzeroll J. Influence of edge effects on local corrosion rate of magnesium alloy/mild steel galvanic couple. Anal. Chem. 2012, 84:9899-9906.
Fix D., Skorb E.V., Shchukin D.G., Mohwald H. Quantitative analysis of scanning electric current density and pH-value observations in corrosion studies. Meas. Sci. Technol. 2011, 22(075704):1-6.
Souto R.M., Gonzalez-Garcia Y., Bastos A.C., Simoes A.M. Investigating corrosion processes in the micrometric range: a SVET study of the galvanic corrosion of zinc coupled with iron. Corros. Sci. 2007, 49:4568-4580.
Alvarez-Pampliega A., Lamaka S.V., Taryba M.G., Madani M., De Strycker J., Tourwe E. Cut-edge corrosion study on painted aluminum rich metallic coated steel by scanning vibrating electrode and micro-potentiometric techniques. Electrochim. Acta 2012, 61:107-117.
Williams G., McMurray H.N. Localized corrosion of magnesium in chloride-containing electrolyte studied by a scanning vibrating electrode technique. J. Electrochem. Soc. 2008, 155:C340-C349.
Williams G., ap Llwyd Dafydd H., Grace R. The localised corrosion of Mg alloy AZ31 in chloride containing electrolyte studied by a scanning vibrating electrode technique. Electrochim. Acta 2013, 109:489-501.
Hinton B.R.W., Wilson L. The corrosion inhibition of zinc with cerous chloride. Corros. Sci. 1989, 29:967-985.
Allachi H., Chaouket F., Draoui K. Protection against corrosion in marine environments of AA6060 aluminium alloy bt cerium chlorides. J. Alloys Compd. 2010, 491:223-229.
Markley T.A., Forsyth M., Hughes A.E. Corrosion protection of AA2024-T3 using rare earth diphenylphosphates. Electrochim. Acta 2007, 52:4024-4031.
Ho D., Brack N., Scully J., Markley T., Forsyth M., Hinton B. Cerium dibutylphosphate as a corrosion inhibitor for AA2024-T3 aluminium alloys. J. Electrochem. Soc. 2006, 153:B392-B401.
