Severa, G., Bethune, K., Rocheleau, R., Higgins, S., SO2 sorption by activated carbon supported ionic liquids under simulated atmospheric conditions. Chem. Eng. J. 265 (2015), 249–258, 10.1016/j.cej.2014.12.051.
Feng, W., Kwon, S., Borguet, E., Vidic, R., Adsorption of Hydrogen sulfide onto activated carbon fibers: effect of pore structure and surface chemistry. Environ. Sci. Technol. 39 (2005), 9744–9749, 10.1021/es0507158.
Arcibar-Orozco, J.A., Rangel-Mendez, J.R., Bandosz, T.J., Reactive adsorption of SO2 on activated carbons with deposited iron nanoparticles. J. Hazard. Mater. 246–247 (2013), 300–309, 10.1016/j.jhazmat.2012.12.001.
Fang, H., Zhao, J., Fang, Y., Huang, J., Wang, Y., Selective oxidation of hydrogen sulfide to sulfur over activated carbon-supported metal oxides. Fuel 108 (2013), 143–148, 10.1016/j.fuel.2011.05.030.
Balsamo, M., Cimino, S., de Falco, G., Erto, A., Lisi, L., ZnO-CuO supported on activated carbon for H2S removal at room temperature. Chem. Eng. J. 304 (2016), 399–407, 10.1016/j.cej.2016.06.085.
de Falco, G., Montagnaro, F., Balsamo, M., Erto, A., Deorsola, F.A., Lisi, L., Cimino, S., Synergic effect of Zn and Cu oxides dispersed on activated carbon during reactive adsorption of H2S at room temperature. Micropor. Mesopor. Mater. 257 (2018), 135–146, 10.1016/j.micromeso.2017.08.025.
Pani, F., Gaunand, A., Richon, D., Cadours, R., Bouallou, C., Absorption of H2S by an aqueous methyldiethanolamine solution at 296 and 343 K. J. Chem. Eng. Data 42:5 (1997), 865–870, 10.1021/je970062d.
Taheri, M., Mohebbi, A., Hashemipour, H., Rashidi, A.M., Simultaneous absorption of carbon dioxide (CO2) and hydrogen sulfide (H2S) from CO2–H2S–CH4 gas mixture using amine-based nanofluids in a wetted wall column. J. Nat. Gas Sci. Eng. 28 (2016), 410–417, 10.1016/j.jngse.2015.12.014.
Karatepe, N., Orbak, I., Yavuzb, R., Özyuğuran, A., Sulfur dioxide adsorption by activated carbons having different and chemical properties. Fuel 87 (2008), 3207–3215, 10.1016/j.fuel.2008.06.002.
Ozekmekci, M., Salkic, G., Fellah, M.F., Use of zeolites for the removal of H2S: a mini-review. Fuel Process. Technol. 139 (2015), 49–60, 10.1016/j.fuproc.2015.08.015.
Sun, W., Lin, L.C., Peng, X., Smit, B., Computational screening of porous metal-organic frameworks and zeolites for the removal of SO2 and NOx from flue gases. AIChE 60 (2014), 2314–2323, 10.1002/aic.14467.
Mabayoje, O., Seredych, M., Bandosz, T.J., Enhanced reactive adsorption of hydrogen sulfide on the composites of graphene/graphite oxide with copper (hydr)oxychlorides. Appl. Mater. Interfaces 4:6 (2012), 3316–3324, 10.1021/am300702a.
Zhu, Y., Gao, J., Li, Y., Sun, F., Gao, J., Wu, S., Qin, Y., Preparation of activated carbons for SO2 adsorption by CO2 and steam activation. J. Taiwan Inst. Chem. Eng. 43 (2012), 112–119, 10.1016/j.jtice.2011.06.009.
Mochizuki, T., Kubota, M., Matsuda, H., Camacho, L.D.F., Adsorption behaviors of ammonia and hydrogen sulfide on activated carbon prepared from petroleum coke by KOH chemical activation. Fuel Process. Technol. 144 (2016), 164–169, 10.1016/j.fuproc.2015.12.012.
Naijing, B., Jun, W., Rui, M., Myongil, C., Qiang, Z., Characterization of activated carbon-13x zeolite composite and its adsorption mechanism on SO2. J. Nanosci. Nanotechnol. 16 (2016), 8839–8845, 10.1166/jnn.2016.11754.
Hamon, L., Serre, C., Devic, T., Loiseau, T., Millange, F., Férey, G., De Weireld, G., Comparative study of hydrogen sulfide adsorption in the MIL-53(Al, Cr, Fe), MIL-47(V), MIL-100(Cr), and MIL-101(Cr) Metal−Organic Frameworks at room temperature. J. Am. Chem. Soc. 25 (2009), 8775–8777, 10.1021/ja901587t.
Wu, C., Song, M., Jin, B., Wu, Y., Zhong, Z., Huang, Y., Adsorption of sulfur dioxide using nickel oxide/carbon adsorbents produced by one-step pyrolysis method. J. Anal. Appl. Pyrol. 99 (2013), 137–142, 10.1016/j.jaap.2012.10.011.
Boudou, J.P., Chehimi, M., Broniek, E., Siemieniewska, T., Bimer, J., Adsorption of H2S or SO2 on an activated carbon cloth modified by ammonia treatment. Carbon. 41 (2003), 1999–2007, 10.1016/S0008-6223(03)00210-0.
Sitthikhankaew, R., Chadwick, D., Assabumrungrat, S., Laosiripojana, N., Performance of sodium-impregnated activated carbons toward low and high temperature H2S adsorption. Chem. Eng. Comm. 201 (2014), 257–271, 10.1080/00986445.2013.767799.
Sitthikhankaew, R., Predapitakkun, S., Kiattikomol, R.W., Pumhiran, S., Assabumrungrat, S., Laosiripojana, N., Comparative study of hydrogen sulfide adsorption by using alkaline impregnated activated carbons for hot fuel gas purification. Energy Procedia 9 (2011), 15–24, 10.1016/j.egypro.2011.09.003.
Tsai, C.Y., Chiu, C.H., Chuang, M.W., His, H.C., Influences of copper(II) chloride impregnation on activated carbon for low-concentration elemental mercury adsorption from simulated coal combustion flue gas. Aerosol Air Qual. Res. 17 (2017), 1637–1648, 10.4209/aaqr.2016.10.0435.
Liu, B., Gu, J., Zhou, J., High surface area rice husk-based activated carbon prepared by chemical activation with ZnCl2-CuCl2 composite activator. Environ. Prog. Sustain. Energy. 35 (2015), 133–140, 10.1002/ep.12215.
Wu, L.C., Chung, Y.C., Replacement of hazardous chromium impregnating agent from silver/copper/chromium-impregnated active carbon using triethylenediamine to remove hydrogen sulfide, trichloromethane, ammonia, and sulfur dioxide. J. Air Waste Manag. Assoc. 59 (2009), 258–265, 10.3155/1047-3289.59.3.258.
Lodewyckx, P., Adsorption of chemical warfare agents. Bandosz, T.J., (eds.) Activated Carbon Surfaces in Environmental Remediation, 2006, Elsevier Ltd, London, 475–528.
Tseng, H.H., Wey, M.Y., Study of SO2 adsorption and thermal regeneration over activated carbon-supported copper oxide catalysts. Carbon 42 (2004), 2269–2278, 10.1016/j.carbon.2004.05.004.
Boutillara, Y., Velasco, L.F., Lodewyckx, P., De Weireld, G., Textural and functional modifications of activated carbons subjected to severe storing conditions. Adsorption 24 (2018), 601–612, 10.1007/s10450-018-9979-5.
(ISO), International Organization for Standardization. Quality Assurance Requirements for Measuring Equipments: Part 1, Metrological Confirmation System for measuring Equipment (ISO 10012-1). Geneva, Switzerland, 1992.
Committee, CEN - European Normalization, European Norm EN 14387: Resperatory Protective devices – Gas filters and combined filters – Requirements, testing, marking, 2004.
Rouquerol, J., Rouquerol, F., Llewellyn, P., Maurin, G., Sing, K., Adsorption by powders and porous solids. Principles, Methodology and Applications, second ed., 2014, Academic Press, Oxford.
Kütahyalı, C., Eral, M., Sorption studies of uranium and thorium on activated carbon prepared from olive stones: kinetic and thermodynamic aspects. J. Nucl. Mater. 396 (2010), 251–256, 10.1016/j.jnucmat.2009.11.018.
Garba, A., Basri, H., Nasri, N.S., Preparation and characterization of green porous palm shell based activated carbon by two step chemical activation Using KOH. Appl. Mech. Mater. 773-774 (2015), 1127–1132, 10.4028/www.scientific.net/AMM.773-774.1127.
Pagketanang, T., Wongwicha, P., Thabuot, M., Characteristics of activated carbon produced from rubber seed shell by using different methods of chemical activation with KOH. Appl. Mech. Mater. 781 (2015), 659–662, 10.4028/www.scientific.net/AMM.781.659.
Gaya, U.I., Otene, E., Abdullah, A.H., Adsorption of aqueous Cd(II) and Pb(II) on activated carbon nanopores prepared by chemical activation of doum palm shell. Springerplus. 4:1 (2015), 1–18, 10.1186/s40064-015-1256-4.
Wu, F.C., Tseng, R.L., Preparation of highly porous carbon from fir wood by KOH etching and CO2 gasification for adsorption of dyes and phenols from water. J. Colloid Interface Sci. 294 (2006), 21–30, 10.1016/j.jcis.2005.06.084.
Molina-Sabio, M., Gonzalez, M.T., Rodriguez-Reinoso, F., Sepiijlveda, A., Escribano effect of steam and carbon dioxide activation in the micropore size distribution of activated carbon. Carbon 34:4 (1996), 505–509, 10.1016/0008-6223(96)00006-1.
Lodewyckx, P., Raymundo-Pinero, E., Vaclavikova, M., Berezovska, I., Suggested improvements in the parameters used for describing the low relative pressure region of the water vapour isotherms of activated carbons. Carbon 60 (2013), 556–558, 10.1016/j.carbon.2013.04.006.
Szymański, G.S., Karpinski, Z., Biniak, S., Swiatkowski, A., The effect of the gradual thermal decomposition of surface oxygen species on the chemical and catalytic properties of oxidized activated carbon. Carbon 40 (2002), 2627–2639, 10.1016/S0008-6223(02)00188-4.
Ehrburger, P., Henlin, J.M., Lahaye, J., Aging of cupric oxide supported on activated carbon. J. Catal. 100 (1986), 429–436, 10.1016/0021-9517(86)90109-0.
Ehrburger, P., Lahaye, J., Dziedzinl, P., Fangeat, R., Effect of aging on the behavior of copper-chromium compounds supported on activated carbon. Carbon. 29 (1991), 297–303, 10.1016/0008-6223(91)90197-Q.
Nowicki, P., Kazmierczak, J., Pietrzak, R., Comparison of physicochemical and sorption properties of activated carbons prepared by physical and chemical activation of cherry stones. Powder Technol. 269 (2015), 312–319, 10.1016/j.powtec.2014.09.023.
Guo, Y., Li, Y., Zhu, T., Ye, M., Investigation of SO2 and NO adsorption species on activated carbon and the mechanism of NO promotion effect on SO2. Fuel 143 (2015), 536–542, 10.1016/j.fuel.2014.11.084.
Bashkova, S., Bagreev, A., Locke, D.C., Bandosz, T.J., Adsorption of SO2 on sewage sludge-derived materials. Environ. Sci. Technol. 35:15 (2001), 3263–3269, 10.1021/es010557u.
Bagreev, A., Bandosz, T.J., A role of sodium hydroxide in the process of hydrogen sulfide adsorption/oxidation on caustic-impregnated activated carbons. Ind. Eng. Chem. Res. 41 (2002), 672–679, 10.1021/ie010599r.
Huang, C.C., Chen, C.H., Chu, S.M., Effect of moisture on H2S adsorption by copper impregnated activated carbon. J. Hazard. Mater. 136:3 (2006), 866–873, 10.1016/j.jhazmat.2006.01.025.
