Staley, J.T., Lege, D.J., Advances in aluminum alloy products for structural applications in transportation. 3rd European Conference on Advanced Materials and Processes, Paris, Jun 08–10, 1993.
Wang, S.C., Starink, M.J., Two types of S phase precipitates in Al–Cu–Mg alloys. Acta Mater. 55 (2006), 933–941.
Boag, A., Hughes, A.E., Wilson, N.C., Torpy, A., MacRae, C.M., Glenn, A.M., Muster, T.H., How complex is the microstructure of AA2024-T3. Corros. Sci. 51 (2009), 1565–1568.
Buchheit, R.G., Grant, R.P., Hlava, P.F., Mckenzie, B., Zender, G.L., Local dissolution phenomena associated with S phase (Al2CuMg) particles in aluminum alloy 2024-T3. J. Electrochem. Soc. 144:8 (1997), 2621–2628.
Hughes, A.E., Boag, A., Glenn, A.M., McCulloch, D., Muster, T.H., Ryan, C., Luo, C., Zhou, X., Thompson, G.E., Corrosion of AA2024-T3 part II: co-operative corrosion. Corros. Sci. 53 (2011), 27–39.
Zhou, X., Luo, C., Hashimoto, T., Hughes, A.E., Thompson, G.E., Study of localized corrosion in AA 2024 aluminium alloy using electron tomography. Corros. Sci. 58 (2012), 299–306.
Starke, E.A. Jr., Staley, J.T., Application of modern aluminum alloys to aircraft. Prog. Aerosp. Sci. 32 (1996), 131–172.
Yang, Y., Zhan, L., Li, J., Constitutive modeling and springback simulation for 2524 aluminum alloy in creep age forming. Trans. Nonferrous Metals Soc. China 25 (2015), 3048–3055.
Chen, Y.Q., Pan, S.P., Zhou, M.Z., Yi, D.Q., Xu, D.Z., Xu, Y.F., Effects of inclusions, grain boundaries and grain orientations on the fatigue crack initiation and propagation behavior of 2524-T3 Al alloy. Mater. Sci. Eng. A 580 (2013), 150–158.
Cervantes, R.L., Murr, L., Earrowood, R.M., Copper nucleation and growth during the corrosion of aluminum alloy 2524 in sodium chloride solutions. J. Mater. Sci. 36 (2011), 4079–4088.
DeBartolo, E.A., Hillberry, B.M., A model of initial flaw sizes in aluminum alloys. Int. J. Fatigue 23 (2001), S79–S86.
Moreto, J.A., Gamboni, O., Ruchert, C.O.F.T., Romagnoli, F., Moreira, M., Beneduce, F.F., Bose Filho, W.W., Corrosion and fatigue of new Al alloys. Procedia Engineering 10 (2011), 1521–1526.
Thompson, G.E., Habazaki, H., Shimizu, K., Sakairi, M., Skeldon, P., Zhou, X., Wood, G.C., Anodizing of aluminium alloys. Aircraft Engineering and Aerospace Technology 71 (1999), 228–238.
Garcia-Vergara, S.J., El Khazmi, K., Skeldon, P., Thompson, G.E., Influence of copper on the morphology of porous anodic alumina. Corros. Sci. 48 (2006), 2937–2946.
Diggle, J.W., Downie, T.C., Goulding, C.W., Anodic oxide films on aluminum. Chem. Rev. 69:3 (1969), 365–405.
Whelan, M., Cassidy, J., Duffy, B., Sol–gel sealing characteristics for corrosion resistance of anodised aluminium. Surf. Coat. Technol. 235 (2013), 86–96.
Aerts, T., Dimogerontakis, Th., De Graeve, I., Fransaer, J., Terryn, H., Influence of the anodizing temperature on the porosity and the mechanical properties of the porous anodic oxide film. Surf. Coat. Technol. 201 (2007), 7310–7317.
Theohari, S., Kontogeorgou, Ch., Effect of temperature on the anodizing process of aluminum alloy AA 5052. Appl. Surf. Sci. 284 (2013), 611–618.
Brevnov, D.A., Rao, G.V.R., López, G.P., Atanassov, P.B., Dynamics and temperature dependence of etching processes of porous and barrier aluminum oxide layers. Electrochim. Acta 49 (2004), 2487–2494.
Lee, W., Park, S.-J., Porous anodic aluminum oxide: anodization and templated synthesis of functional nanostructures. Chem. Rev. 114 (2014), 7487–7556.
Grieshop, S.N., Buchheit, R.G., Comparison of the Corrosion Behavior of High Strength Aluminum Alloys after Exposure to ASTM B117 Environment. http://hdl.handle.net/1811/60362, 2014 (accessed 08.08.2016).
Donley, M.S., Mantz, R.A., Khramov, A.N., Balbyshev, V.N., Kasten, L.S., Gaspar, D.J., The self-assembled nanophase particle (SNAP) process: a nanoscience approach to coatings. Prog. Org. Coat. 47 (2003), 401–415.
García-Rubio, M., Ocón, P., Curioni, M., Thompson, G.E., Skeldon, P., Lavía, A., García, I., Degradation of the corrosion resistance of anodic oxide films through immersion in the anodising electrolyte. Corros. Sci. 52 (2010), 2219–2227.
García-Rubio, M., de Lara, M.P., Ocón, P., Diekhoff, S., Beneke, M., Lavía, A., García, I., Effect of postreatment on the corrosion behaviour of tartaric–sulphuric anodic films. Electrochim. Acta 54 (2009), 4789–4800.
Capelossi, V.R., Poelmanc, M., Recloux, I., Hernandez, R.P.B., de Melo, H.G., Olivier, M.G., Corrosion protection of clad 2024 aluminum alloy anodized in tartaric-sulfuric acid bath and protected with hybrid sol–gel coating. Electrochim. Acta 124 (2014), 69–79.
Zemanová, M., Chovancová, M., Fellner, P., Prekopp, K., Corrosion resistance and quality of sealed porous alumina coatings. Chem. Pap. 52:3 (1998), 152–155.
González, J., Morcillo, M., Escudero, E., López, V., Otero, E., Atmospheric corrosion of bare and anodized aluminium in a wide range of environmental conditions. Part I: visual observations and gravimetric results. Surf. Coat. Technol. 153 (2002), 225–234.
Druart, M.-E., Richir, J.-B., Poirier, C., Maseri, F., Godeau, N., Langer, L., Olivier, M., Influence of sol–gel application conditions on metallic substrate for optical applications. Corros. Eng. Sci. Technol. 46:6 (2011), 677–684.
Balbyshev, V.N., Anderson, K.L., Sinsawat, A., Farmer, B.L., Donley, M.S., Modeling of nano-sized macromolecules in silane-based self-assembled nano-phase particle coatings. Prog. Org. Coat. 47 (2003), 337–341.
ASTM, ASTM B117-11 Standard Practice for Operating Salt-spray (Fog) Apparatus. 2012, American Society for Testing of Materials.
Le Coz, F., Arurault, L., Datas, L., Chemical analysis of a single basic cell of porous anodic aluminium oxide templates. Mater. Charact. 61 (2010), 283–288.
Ono, S., Saito, M., Asoh, H., Self-ordering of anodic porous alumina formed in organic acid electrolytes. Electrochim. Acta 51 (2005), 827–833.
Fratila-Apachitei, L.E., Duszczyk, J., Katgerman, L., Voltage transients and morphology of AlSi(Cu) anodic oxide layers formed in H2SO4 at low temperature. Surf. Coat. Technol. 157 (2002), 80–94.
Ma, Y., Zhou, X., Thompson, G.E., Curioni, M., Zhong, X., Koroleva, E., Skeldon, P., Thomson, P., Fowles, M., Discontinuities in the porous anodic film formed on AA2099-T8 aluminium alloy. Corros. Sci. 53 (2011), 4141–4151.
Jessensky, O., Müller, F., Gösele, U., Self-organized formation of hexagonal pore structures in anodic alumina. J. Electrochem. Soc. 145:11 (1998), 3735–3740.
Voon, C.H., Derman, M.N., Hashim, U., Foo, K.L., Adam, T., Effect of anodizing voltage on the morphology and growth kinetics of porous anodic alumina on Al-0.5 wt% Mn alloys. Adv. Mater. Res. 832 (2014), 101–106.
Garcia-Vergara, S.J., Skeldon, P., Thompson, G.E., Habazaki, H., Stress generated porosity in anodic alumina formed in sulphuric acid electrolyte. Corros. Sci. 49 (2007), 3772–3782.
Chahrour, K.M., Ahmed, N.M., Hashim, M.R., Elfadill, N.G., Maryam, W., Ahmad, M.A., Bououdina, M., Effects of the voltage and time of anodization on modulation of the pore dimensions of AAO films for nanomaterials synthesis. Superlattice. Microst. 88 (2015), 489–500.
Safrany, J.S., Anodisation de l'aluminium et de ses alliages. Techniques de l'ingénieur, traité Matériaux métalliques M1630:v5 (2008), 1–22.
Hirai, S., Shimakage, K., Aizawa, S., Wada, K., Alkaline corrosion resistance of anodized aluminum coated with zirconium oxide by a sol-gel process. J. Am. Ceram. Soc. 81 (1998), 3087–3092.
Liu, T., Zhang, F., Xue, C., Li, L., Yin, Y., Structure stability and corrosion resistance of nano-TiO2 coatings on aluminum in seawater by a vacuum dip-coating method. Surf. Coat. Technol. 205 (2010), 2335–2339.
Miao, Z., Xu, D., Ouyang, J., Guo, G., Zhao, X., Tang, Y., Electrochemically induced sol-gel preparation of single-crystalline TiO2nanowires. Nano Lett. 2:7 (2002), 717–720.
Xu, D., Yu, Y., Zheng, M., Guo, G., Tang, Y., Electrochemical fabrication of one-dimensional silica nanostructures. Electrochem. Commun. 5 (2003), 673–676.
Kosmulski, M., Isoelectric points and points of zero charge of metal (hydr)oxides: 50 years after Parks'review. Adv. Colloid Interf. Sci. 238 (2016), 1–61.
González, J.A., Lopez, V., Bautista, A., Otero, E., Characterization of porous aluminium oxide films from a.c. impedance measurements. J. Appl. Electrochem. 29 (1999), 229–238.
Bonora, P.L., Deflorian, F., Fedrizzi, L., Electrochemical impedance spectroscopy as a tool for investigating underpaint corrosion. Electrochim. Acta 41 (1996), 1073–1082.
Boisier, G., Pébère, N., Druez, C., Villatte, M., Suel, S., FESEM and EIS study of sealed AA2024 T3 anodized in sulfuric acid electrolytes: Influence of tartaric acid. J. Electrochem. Soc. 155:11 (2008), C521–C529.
Boisier, G., Lamure, A., Pébère, N., Portail, N., Villatte, M., Corrosion protection of AA2024 sealed anodic layers using the hydrophobic properties of carboxylicacids. Surf. Coat. Technol. 203 (2009), 3420–3426.
Deflorian, F., Rossi, S., Fedrizzi, L., Silane pre-treatments on copper and aluminium. Electrochim. Acta 51 (2006), 6097–6103.
Wang, H., Akid, R., A room temperature cured sol–gel anticorrosion pre-treatment for Al 2024-T3 alloys. Corros. Sci. 49 (2007), 4491–4503.
Zhou, F., Mohamed Al-Zenati, A.K., Baron-Wiecheć, A., Curioni, M., Garcia-Vergara, S.J., Habazaki, H., Skeldon, P., Thompson, G.E., Volume expansion factor and growth efficiency of anodic alumina formed in sulphuric acid. J. Electrochem. Soc. 158 (2011), C202–C214.
Mínguez-Bacho, I., Rodríguez-López, S., Climent, A., Fichou, D., Vázquez, M., Hernández-Vélez, M., Influence of sulfur incorporation into nanoporous anodic alumina on the volume expansion and self-ordering degree. J. Phys. Chem. C 119 (2015), 27392–27400.
Patermarakis, G., Chandrinos, J., Moussoutzanis, K., Interface physicochemical processes controlling sulphate anion incorporation in porous anodic alumina and their dependence on the thermodynamic and transport properties of cations. J. Electroanal. Chem. 510 (2001), 59–66.
Mansfeld, F., Kendig, M.W., Evaluation of anodized aluminum surfaces with electrochemical impedance spectroscopy. J. Electrochem. Soc. 135:4 (1988), 828–833.
