[en] The failures in diagnostics for monitoring condition of rotation machinery in the industry are very important to ensure production efficiency and safety. Moreover, these failures can cause serious malfunctioning to the machine and therefore a large lack in production. In this domain, infrared thermography is a technique that has been used frequently as a predictive tool for the maintenance of electrical installations. In fact, the most important installation faults lead to an increase of temperature in specific areas. This work presents a methodology based on thermographic image for fault detection in induction motors and the repercussion of these faults along the production chain, but due to the type of mechanical failure caused by misalignment in infrared technology there is a heating of rotating machine.
Siyambalapitiya D. J. T. and Mclaren P. G., "Reliability improvement and economic benefits of on-line monitoring systems for large induction machines," IEEE Trans. Ind. Applicat., 26 (1990) 1018-1025.
Prieto M.D., Cirrincione G., Espinosa A.G., Ortega J.A., Henao H., Bearingfault detection by a novel condition-monitoring scheme based on statistical-time features and neural networks, IEEE Trans. Ind. Electron. 66 (2013) 3398-3407.
Rai V.K., Mohanty A.R., Bearing fault diagnosis using FFT of intrinsic mode functions in Hilbert-Huang transform, Mech. Syst. Signal Process. 21 (2007) 2607-2615.
Kia S.H., Henao H., Capolino G.A., Diagnosis of broken-bar fault in induction machines using discrete wavelet transform without slip estimation, IEEE Trans.Ind. Appl. 45 (2009) 1395-1404.
Kral C., Habetler T.G., Detection of mechanical imbalances of induction machines without spectral analysis of time-domain signals, IEEE Trans. Ind. Appl. 40 (2004) 1101-1106.
Kral C., Kapeller H., Gragger J.V., Pirker F., Pascoli G., Detection of mechanical imbalances during transient torque operating conditions, IEEE Inter. Symp. Diagn. Electr. Mach. Power Electron. Drives (2005) 1-4.
Bossio J.M., Bossio G.R., De Angelo C.H., Angular misalignment in induction motors with flexible with flexible coupling, in: IEEE 35th Annu. Conf. of Ind. Electron, 2009, pp. 1033-1038.
Patel T.H., Darpe A.K., Experimental investigations on vibration response of misaligned rotors, Mech. Syst. Signal Process. 23, (2009) 2236-2252.
Estupiflan E., Espinoza D. and Fuentes A., "Energy losses caused by misalignment in rotating machinery : A theoretical, experimental and industrial approach", International Journal of COMADEM, 11 no. 2, (2008) 12-18.
Benbouaza A., Elkihel B., and Delaunois F., "Analysis and diagnosis of the different defects of asynchronous machines by vibration analysis", International Journal on Computer Science and Engineering, 5, issue 4, (2013) 258-269.
Picazo-Rodenas M.J., Royo R., Antonino-Daviu J., Roger-Folch J., Use of theinfrared data for heating curve computation in induction motors: applicationto fault diagnosis, Eng. Fail. Anal. 35 (2013) 178-192.
Holst G.C., Common Sense Approach to Thermal Imaging, PM86, SPIE pressmonograph, Winter Park, Florida, 2000.
Taib S., Jadin M.S., Kabir S., in: R.V. Prakash (Ed.), Thermal Imaging for Enhancing Inspection Reliability: Detection and Characterization, ISBN: 978-953-51-0242-7, InTech, Rijeka, Croatia, 2012, pp. 209-236.
Maldague X., Theory and Practice of Infrared Technology for Nondestructive Testing. J. Wiley & Sons, ISBN: 978-0-471-18190-3, Canada (2001).
Fokaides PA, Kalogirou SA. Application of infrared thermography for the determination of the overall heat transfer coefficient (U-Value) in building envelopes. Appl. Energy 88 (2011) 4358-65.
Zhang P., Du Y., Habetler T.G., Lu B., A survey of condition monitoring and protection methods for medium-voltage induction motors, IEEE Trans. Ind. Appl. 47 (2011) 34-46.
Manés F. Cabanas, Manuel G. Melero, Javier G. Aleixandre, J. Solares, "Shaft misalignment diagnosis of induction motors using current spectral analysis: a theoretical approach" International Conference on Electric Machines, ICEM 96, Vigo 10-12 September 1996.
Hines J. W., Jesse S., Kuropatwinski J., Carley T., Kueck J., Nower D., and Hale F., "Motor Shaft Alignment Versus Efficiency Analysis", published in P/PM Technology, October 1997, pp 10-13, and presented at the P/PM Technology Conference, Dec. 1-4, 1997, Dallas, TX