 | Stanciu, V. I., Erauw, J.-P., Boilet, L., Vitry, V., & Delaunois, F. (April 2023). WC-Co composite made with doped binder: The effect of binder proportion on microstructure and mechanical properties. International Journal of Refractory Metals and Hard Materials, 112, 106161. doi:10.1016/j.ijrmhm.2023.106161  Peer Reviewed verified by ORBi |
 | Mégret, A., Vitry, V., & Delaunois, F. (February 2023). The effect of boron-doped cobalt additions on mechanical properties of a recycled WC-Co powder. International Journal of Refractory Metals and Hard Materials, 111, 106098. doi:10.1016/j.ijrmhm.2022.106098 Peer Reviewed verified by ORBi |
| Melik, W., Boumerzoug, Z., & Delaunois, F. (31 December 2022). Fabrication and welding of aluminum composite. The International Journal of Materials and Engineering Technology, 5 (2), 71-74. Peer reviewed |
| Bossu, J., Delaunois, F., Spitaels, L., Ducobu, F., & Rivière, E. (08 December 2022). HYbrid PROduction of Pellets-based (PIM-MIM-CIM) Additive Manufactured parts - HyProPAM. Paper presented at Conférence méca, Mons, Belgium. |
| Boumerzoug, Z., Delaunois, F., Beziou, O., & Hamdi, I. (21 November 2022). Investigation of the heat affected zone by thermal cycle simulation technique. The International Journal of Materials and Engineering Technology, 5 (2), 80-83. Peer reviewed |
Delaunois, F. (2022). Le petit singe de la Grand'Place de Mons a subi une série de tests à l'UMons (RTL-TVI - RTL Info). Belgium: RTL-TVI - RTL Info. |
Delaunois, F. (2022). Le singe de Mons de passage dans les locaux de l’UMons afin de passer une série de tests (La Libre Belgique). Belgium: La Libre Belgique. |
| Delaunois, F. (2022). Le Singe du Grand’Garde passe des examens de santé (Sud Presse). Belgium: Sud Presse. |
Delaunois, F. (2022). Mons : le petit singe fétiche autopsié (VivaCité - RTBF La Première - RTBF - La Une). Belgium: VivaCité - Journal Parlé - Ed. nationale 17h00. |
Delaunois, F. (2022). Mons - Les mystères du singe bientôt élucidés ? (Télé MB). Belgium: Télé MB. |
Mégret, A., Vitry, V., & Delaunois, F. (26 October 2022). Etudes thermodynamique et mécanique de nouveaux liants pour les carbures de tungstène. Paper presented at Matériaux 2022, Lille, France. Editorial reviewed |
| Bossu, J., Delaunois, F., Martic, G., Delmotte, C., Spitaels, L., Ducobu, F., & Rivière, E. (24 October 2022). Pellets Additive Manufacturing of dense Tosoh black zirconia parts. Poster session presented at Conférence internationale Matériaux 2022, Lille, France. |
| Delaunois, F. (October 2022). Importance de la vitesse de trempe en traitement thermique : théorie et cas pratique. VOM info, 05, 24-25. |
Vitry, V., Papanaoum, M., Mégret, A., & Delaunois, F. (13 September 2022). Even failure analysts can blow things up, it seems. Paper presented at IMAT 2022, New Orleans, United States - Louisiana. |
Delaunois, F., Mégret, A., & Vitry, V. (13 September 2022). Teaching good practices in Failure Analysis to students to help them react efficiently to damage in their professional career. Paper presented at IMAT2022, New Orleans, United States. Editorial reviewed |
| Boumerzoug, Z., & Delaunois, F. (09 September 2022). Effect of Heat Treatment on Dissimilar 316l And 316 Austenitic Stainless Steel TIG Welded Joints. SunText Review of Material Science, 3 (1), 116-122. Peer reviewed |
| Mégret, A., Leclef, A., Vitry, V., & Delaunois, F. (06 September 2022). Thermodynamic and mechanical investigations of novel binders for cemented carbides. Poster session presented at Mardi des Chercheurs 2022 (MdC2022), Mons, Belgium. |
| Bossu, J., Delaunois, F., Spitaels, L., Ducobu, F., & Rivière, E. (06 September 2022). Production hybride de pièces fabriquées par additif à base de granulés (PIM-MIM-CIM) (Win²Wal – HyProPAM). Poster session presented at Mardi des chercheurs, Mons, Belgium. |
| Boumerzoug, Z., Gheriani, Y., & Delaunois, F. (25 August 2022). Effect of Heat Treatment on Microstructural Evolution and Mechanical Properties of a Welded Pipeline A970 Duplex Stainless Steel. Research & Development in Material science, 17 (4), 1998-2003. doi:10.31031/RDMS.2022.17.000920 Peer reviewed |
| Mégret, A., Vitry, V., & Delaunois, F. (2022). The effect of boron-doped cobalt additions on mechanical properties of a recycled WC-Co powder. Proceeding of 20th Plansee Seminar. |
| Mégret, A., Vitry, V., & Delaunois, F. (01 April 2022). High-energy ball milling of WC-10Co: Effect of the milling medium and speed on the mechanical properties. International Journal of Refractory Metals and Hard Materials, 104. doi:https://doi.org/10.1016/j.ijrmhm.2021.105774 Peer Reviewed verified by ORBi |
| Delaunois, F., Stanciu, V. I., Mégret, A., & Sinnaeve, M. (March 2022). Oxidation and wear behavior of high-speed steel and semi-high-speed steel used in hot strip mill. The International Journal of Advanced Manufacturing Technology, 119 (1-2), 677-689. doi:10.1007/s00170-021-08031-0 Peer Reviewed verified by ORBi |
| Bedjaoui, W., Boumerzoug, Z., & Delaunois, F. (2022). Solid-State Diffusion Welding of Commercial Aluminum Alloy with Pure Copper. International Journal of Automotive and Mechanical Engineering, 19 (2), 9734 - 9746. doi:10.15282/ijame.19.2.2022.09.0751 Peer Reviewed verified by ORBi |
Delaunois, F. (2022). Le Singe de la ville de Mons subit quelques tests. Belgium: RTL-TVI - RTL Info Bienvenue. |
| Melik, W., Boumerzoug, Z., & Delaunois, F. (04 December 2021). Solide State Diffusion Bonding of Al6061-SiC Nanocomposites. International Journal of Automotive and Mechanical Engineering, 18 (4), 9305-9311. Peer Reviewed verified by ORBi |
Vitry, V., Bonin, L., & Delaunois, F. (14 September 2021). Towards Lead-free electroless nickel-boron plating. Paper presented at Internatinal Materials, Applications & Technologies IMAT2021, Saint Louis, Missouri, United States. |
| Delaunois, F., Mégret, A., & Vitry, V. (13 September 2021). Interest in advanced microscopy for the failure analysis of metallic components. Paper presented at Internatinal Materials, Applications & Technologies IMAT2021, Saint Louis, Missouri, United States. |
| Boumerzoug, Z., Hamdi, I., Bedjaoui, W., Baghdadi, L., Chettah, M., & Delaunois, F. (31 August 2021). Microstructures of Dissimilar Materials Welded by Solid State Diffusion Bonding Process. Aspects in Mining & Mineral Science, 7 (2), 808-810. Peer reviewed |
| Delaunois, F., Mégret, A., & Vitry, V. (23 June 2021). Failure analysis of metallic components due to improper materials and fabrication method. Paper presented at ICEAF VI : Conference of Engineering Against Failure, Virtual, Greece. |
Vitry, V., Bonin, L., Yunacti, M., Mégret, A., & Delaunois, F. (01 June 2021). Electroless nickel boron coatings, can it replace hard chrome? Paper presented at Thermec'2021, Graz, Austria. |
Delaunois, F., Stanciu, V. I., Erauw, J.-P., & Vitry, V. (01 June 2021). The effect of the proportion of doped binder on the microstructure and properties of WC-Co composites. Paper presented at Thermec'2021, Graz, Austria. |
| Khoshnaw, F., Delaunois, F., & Vitry, V. (07 April 2021). Recovery of the microstructural changes of different duplex stainless steel alloys. Multidiscipline Modeling in Materials and Structures, 17 (3), 668-680. Peer Reviewed verified by ORBi |
| Mégret, A., Sibille, T., Vitry, V., & Delaunois, F. (30 March 2021). Study of the stability of electroless cobalt boron baths - E-WC project. Poster session presented at Mardi des Chercheurs 2021, Valenciennes, France. |
| Mégret, A., Vitry, V., & Delaunois, F. (17 March 2021). Study of the Processing of a Recycled WC-Co Powder: Can It Compete with Conventional WC-Co Powders? Journal of Sustainable Metallurgy, 7, 448-458. Peer Reviewed verified by ORBi |
| Bonin, L., Vitry, V., & Delaunois, F. (15 November 2020). Inorganic salts stabilizers effect in electroless nickel-boron plating: Stabilization mechanism and microstructure modification. Surface and Coatings Technology, 401. Peer Reviewed verified by ORBi |
Delaunois, F. (2020). Mons-Borinage: Une terre fertile pour les champs photovoltaïques. |
| Hamdi, I., Boumerzoug, Z., & Delaunois, F. (24 August 2020). Simulation of Heat Affected Zone in X60 Steel. Insights in Mining Science & Technology, 6, 52-58. Peer reviewed |
| Raouache, E., Boumerzoug, Z., Delaunois, F., & Khalfallah, F. (01 May 2020). Investigation by Thermal Cycle Simulation of Heat Affected Zone in Welded AA2014 Aluminum Alloy. Research & Development in Material science, 13 (3), 1407-1411. doi:10.31031/RDMS.2020.13.000812 Peer reviewed |
| Bonin, L., Vitry, V., & Delaunois, F. (30 April 2020). Replacement of Lead stabilizer in electroless Nickel-Boron baths: Synthesis and characterization of coatings from bismuth stabilized bath. Sustainable Materials and Technologies, 23. Peer reviewed |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (20 April 2020). Influence of the milling parameters on the sintering behaviour of WC-Co composites. Materials and Manufacturing Processes, 35 (7), 811-816. doi:10.1080/10426914.2020.1743850 Peer Reviewed verified by ORBi |
| Vitry, V., Bonin, L., Yunacti, M., Mégret, A., & Delaunois, F. (07 March 2020). Electroless nickel-boron coatings, can it replace hard chrome? Paper presented at SIXTH ASIAN CONFERENCE ON HEAT TREAT AND SURFACE ENGINEERING, Chennai, India. |
| Vitry, V., Stanciu, V. I., & Delaunois, F. (06 March 2020). Second advice: how failure analysis of metallic components can bring very different results when carried out by different labs, while it should not. Paper presented at SIXTH ASIAN CONFERENCE ON HEAT TREAT AND SURFACE ENGINEERING, Chennai, India. |
| Mdehheb, Z., El Kihel, B., Bouamama, M., Hammouti, B., & Delaunois, F. (20 February 2020). The environmental management system and its application impacts on the business economy in the eastern region of morocco. Caspian Journal of Environmental Sciences, 18 (1), 13-20. Peer Reviewed verified by ORBi |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (01 February 2020). Study of the milling parameters optimization in the direct carburization of WO3 by mechanical alloying. International Journal of Refractory Metals and Hard Materials, 87, 51-60. Peer Reviewed verified by ORBi |
| Khoshnaw, F., Vitry, V., & Delaunois, F. (05 January 2020). Feasibility Study of Using Thermal Simulator to Observe Metallurgical Aspects of Welded Duplex Stainless Steel. International Journal of Advances in Science Engineering and Technology, 7 (4), 50-55. Peer reviewed |
| Khathyri, F., Elkihel, B., & Delaunois, F. (01 December 2019). Review of damages prediction in a composite material at low velocity impact. Global Journal of Engineering and Technology Advances, 1 (1), 27-42. Peer reviewed |
Delaunois, F., Bonin, L., Vitry, V., Begum, S., Cobley, A., Castano, J., Correa, E., Das, S. K., Echeverría, F., García-Lecina, E., Sudagar, J., Salicio Paz, A., Muraliraja, R., Sahoo, P., Selvakumar, A., Tamilarasan, T. R., Udayakumar, S., Urgen, M., Zuleta Gil, A. A., ... Vitry, V. (Ed.). (2019). Electroless nickel plating: Fundamentals to applications. CRC Press. |
| Mégret, A., Vitry, V., & Delaunois, F. (2019). Impact of the Amount of Recycled Cemented Carbide Powder on the Sintering Behavior of WC-Co Parts. Paper presented at Euro PM2019 Congress & Exhibition, Maastricht, Netherlands. |
Delaunois, F. (2019). Electroless Nickel-Boron - Part A: As-Plated Electroless Nickel-Boron. In F. Delaunois, L. Bonin, V. Vitry, S. Begum, A. Cobley, J. Castano, E. Correa, S. K. Das, F. Echeverría, E. García-Lecina, J. Sudagar, A. Salicio Paz, R. Muraliraja, P. Sahoo, A. Selvakumar, T. R. Tamilarasan, S. Udayakumar, M. Urgen, A. A. Zuleta Gil, F. Delaunois (Ed.), L. Bonin (Ed.), ... V. Vitry (Ed.), Electroless Nickel Plating: Fundamentals to applications (pp. 173-222). CRC Press. |
| Delaunois, F., DENIL, E., Marchal, Y., & Vitry, V. (2019). Contribution to the study of portevin-le chatelier effect in aluminum alloy 2024. Paper presented at MS&T2019, Portland, United States - Oregon. |
Vitry, V., & Delaunois, F. (30 September 2019). Doomed ! Parts that have made it through quality control and shouldn't have. Paper presented at MS&T2019, Portland, United States - Oregon. |
| HAMZA, S., Boumerzoug, Z., Raouache, E., & Delaunois, F. (16 September 2019). Simulated heat affected zone in welded stainless steel 304L. Acta Metallurgica Slovaca, 25 (3), 142-149. Peer Reviewed verified by ORBi |
Vitry, V., Bonin, L., & Delaunois, F. (13 September 2019). Corrosion resistance of electroless Ni-B-Sn alloys. Paper presented at Eurocorr 2019, Sevilla, Spain. |
| Bakdid, A., El Kihel, B., Nougaoui, A., & Delaunois, F. (25 August 2019). Three-Dimensional Characterization of Weld Defects in a Steel Material. Journal of Engineering and Applied Sciences, 14 (6), 1928 - 1932. doi:10.36478/jeasci.2019.1928.1932 Peer reviewed |
Vitry, V., Bonin, L., & Delaunois, F. (21 August 2019). BONICOAT. |
Geelkens, M., & Delaunois, F. (2019). Les failles du recyclage. LE VIF Numéro 26. |
| Firrao, D., Dupont, P., Matteis, P., Pinasco, M. R., Ienco, G., Delaunois, F., & Vitry, V. (13 June 2019). Failure analysis of a large extrusion gearbox An International FAS Network Analysis. Paper presented at IGF25 - 25th International Conference - Fracture and Structural Integrity, Catania, Italy. |
| Stanciu, V. I., Vitry, V., Boilet, L., Erauw, J.-P., & Delaunois, F. (22 May 2019). Influence d'un liant dopé sur les propriétés mécaniques des alliages WC Co. Poster session presented at Poudres 2019 - Matériaux frittés et fabrication additive, Grenoble, France. |
Stanciu, V. I., Erauw, J.-P., Vitry, V., & Delaunois, F. (09 April 2019). Amélioration des propriétés mécaniques des alliages WC-Co par l'utilisation d'un liant dopé et frittage SPS. Paper presented at Colloque Réseau National de la Métallurgie La Métallurgie, quel Avenir !, Nancy, France. |
Stanciu, V. I., Vitry, V., & Delaunois, F. (25 March 2019). Study of the milling parameters optimization in the direct carburization of WO3 by mechanical alloying. Poster session presented at 11th International Conference on the Science of Hard Materials (ICSHM11), Khao Lak, Thailand. |
| Mégret, A., Vitry, V., & Delaunois, F. (05 March 2019). Study of the sinterability of a recycled tungsten carbide powder. Poster session presented at Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium. |
Stanciu, V. I., Vitry, V., & Delaunois, F. (05 March 2019). Influence du pré-broyage de la poudre de WC sur la frittabilité des composites WC-Co. Poster session presented at Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium. |
| Rachidi, R., Elkihel, B., & Delaunois, F. (01 February 2019). Microstructure and mechanical characterization of NiCrBSi alloy and NiCrBSi-WC composite coatings produced by flame spraying. Materials Science and Engineering: B, Solid-State Materials for Advanced Technology, 241, 13-21. Peer Reviewed verified by ORBi |
| Rachidi, R., Elkihel, B., Delaunois, F., & Deschuyteneer, D. (01 January 2019). Effectiveness of phased array focused ultrasound and active infrared thermography methods as a nondestructive testing of Ni-WC coating adhesion. Nondestructive Testing and Evaluation, 35 (2), 205-220. Peer Reviewed verified by ORBi |
| Regad, Y., Elkihel, B., & Delaunois, F. (2019). Modeling Approach of the Experiment: Waste Reuse of the Jerada Thermal Power Plant (Morocco). Paper presented at ICEERE 2018, Saidia, Morocco. |
| Bonin, L., Vitry, V., & Delaunois, F. (01 January 2019). The tin stabilization effect on the microstructure, corrosion and wear resistance of electroless NiB coatings. Surface and Coatings Technology, 357, 353-363. Peer Reviewed verified by ORBi |
| Bonin, L., Delaunois, F., & Vitry, V. (2018). Revêtements chimiques de nickel-bore. In Techniques de l'Ingénieur - Paris (pp. 1-19). Techniques de l'Ingénieur. |
| Khathyri, F., Elkihel, B., & Delaunois, F. (01 December 2018). Non-Destructive Testing by Ultrasonic and Thermal Techniques of an Impacted Composite Material. International Journal on Advanced Science, Engineering and Information Technology, 8 (6), 2360-2366. Peer reviewed |
Mégret, A., Thuault, A., Broeckmann, C., Sistla, S. K., Vitry, V., & Delaunois, F. (21 November 2018). Frittage des carbures de tungstène-cobalt recyclés. Paper presented at Matériaux 2018, Strasbourg, France. |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (20 November 2018). Nouvelle approche en vue d'introduire des inhibiteurs de croissance des grains dans les carbures cémentés. Paper presented at Matériaux 2018, Strasbourg, France. |
Vitry, V., & Delaunois, F. (17 October 2018). Gamification of metallographic lab practice teaching by failure analysis. Paper presented at Materials Science and Technology 2018, Columbus, United States. |
Dupont, P., Firrao, D., Vitry, V., & Delaunois, F. (16 October 2018). 'The Failure Analysis & Prevention of a Large and Critical Extrusion Gearbox Part 2/2 : From Failure Analysis to Prevention, an International FAS Network Answer:'. Paper presented at Materials Science and Technology 2018, Columbus, United States. |
Dupont, P., Firrao, D., Vitry, V., & Delaunois, F. (16 October 2018). 'The Failure Analysis & Prevention of a Large and Critical Extrusion Gearbox Part 1/2 : The Case Study an Internationbal FAS Network Analysis'. Paper presented at Materials Science and Technology 2018, Columbus, United States. |
| Bonin, L., Castro, C., Vitry, V., Hantson, A.-L., & Delaunois, F. (16 October 2018). Optimization of electroless NiB deposition without stabilizer, based on surface roughness and plating rate. Journal of Alloys and Compounds, 767, 276-284. Peer Reviewed verified by ORBi |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (2018). Effect of doped binder on the microstructure of a WC-Co composite. Paper presented at Euro PM2018 Congress & Exhibition, Bilbao, Spain. |
| Mégret, A., Stanciu, V. I., Thuault, A., Broeckmann, C., Sistla, S. K., Vitry, V., & Delaunois, F. (2018). Unconventional Sintering of a Commercial Cemented WC-6Co Hardmetal. Paper presented at Euro PM2018 Congress & Exhibition, Bilbao, Spain. |
Stanciu, V. I., Vitry, V., & Delaunois, F. (04 October 2018). Effect of doped binder on the microstructure of a WC-Co composite. Paper presented at Euro PM2018 Congress & Exhibition, Bilbao, Spain. |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (18 September 2018). Impact of WC-Co powder preparation on the SPS sintering behavior. Paper presented at 2018 World Congress on Powder Metallurgy, Beijing, China. |
Stanciu, V. I., Vitry, V., & Delaunois, F. (2018). Impact of WC-Co powder preparation on the SPS sintering behavior. Paper presented at 2018 World Congress on Powder Metallurgy, Beijing, China. |
Tosar, F., Delaunois, F., Vitry, V., & Groulard, F. (11 September 2018). Stainless steel corrosion in pharmaceutical industries: Rouging study in laboratory conditions. Paper presented at Eurocorr 2018, Krakow, Poland. |
Vitry, V., Bonin, L., & Delaunois, F. (09 September 2018). Ultrasound assisted electroless deposition of nickel-boron coatings: Effect of ultrasonic frequency on the tribocorrosion behavior. Poster session presented at Eurocorr 2018, Krakow, Poland. |
| Delaunois, F., Blanchard, P., Rigot, O., & Kairet, T. (11 July 2018). Microstructure and porosity of Ti-6Al-4V samples produced by Electron Beam Melting. Paper presented at thermec 2018, Paris, France. |
Bonin, L., Castro, C., Vitry, V., Hantson, A.-L., & Delaunois, F. (09 July 2018). Optimization of electroless NiB deposition without stabilizer, based on surface roughness and plating rate. Poster session presented at thermec 2018, Paris, France. |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (03 July 2018). Effet de l'utilisation d'un liant dopé sur la microstructure des composites WC-Co. Poster session presented at 9e Colloque Sciences et Technologie des Poudres, Compiègne, France. |
Bonin, L., Vitry, V., & Delaunois, F. (29 June 2018). Role of tin as a stabilizer in an electroless nickel-boron plating bath: Electroless NiB-Sn alloys properties. Paper presented at SMT32 - 32nd International Conference on Surface Modification Technologies, San Sebastian, Spain. |
| Mégret, A., Stanciu, V. I., Thuault, A., Vitry, V., & Delaunois, F. (19 June 2018). Microwave sintering of cemented tungsten-cobalt carbides. Poster session presented at International Symposium on Inorganic and Environmental Materials, Gent, Belgium. doi:10.13140/RG.2.2.32962.89287 |
| Delaunois, F., Roudet, F., & Vitry, V. (2018). Trends in heat treatment and surface engineering. Paper presented at 24th IFHTSE, Paris, France. |
| Delaunois, F., & Vitry, V. (11 April 2018). The teaching of physical metallurgy based on the acquisition of soft-skills. Poster session presented at 10th International Materials Education Symposium, Cambridge, United Kingdom. |
| Mégret, A., Vitry, V., & Delaunois, F. (27 March 2018). Unconventional sintering of cemented WC-Co carbides. Poster session presented at Mardi des Chercheurs 2018, Valenciennes, France. doi:10.13140/RG.2.2.31795.94242 |
Bonin, L., Vitry, V., & Delaunois, F. (27 March 2018). Role of tin as a stabilizer in an electroless nickel-boron plating bath: Electroless NiB-Sn alloys properties. Poster session presented at Mardi des Chercheurs (MdC2018), Valenciennes, France. |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (27 March 2018). Optimisation de l'homogénéisation des alliages WC-Co. Poster session presented at Mardi des Chercheurs (MdC2018), Valenciennes, France. |
| Delaunois, F., Stanciu, V. I., & Mario, S. (01 March 2018). Resistance to high-temperature oxidation and wear of various ferrous alloys used in rolling mills. Metallurgical and Materials Transactions. Part A, 49 (3), 822-835. Peer Reviewed verified by ORBi |
Bonin, L., Vitry, V., & Delaunois, F. (23 February 2018). Corrosion behaviour of electroless high boron-mid phosphorous nickel duplex coatings in the as-plated and heat-treated states in NaCl, H2SO4, NaOH and Na2SO4 media. Materials Chemistry and Physics, 208, 77-84. Peer Reviewed verified by ORBi |
| Delaunois, F., & Vitry, V. (24 October 2017). Enseignement des alliages métalliques orienté compétences. Paper presented at Journées Annuelles SF2M 2017, Lyon, France. |
Vitry, V., Stanciu, V. I., Dupont, P., & Delaunois, F. (12 October 2017). Failure of a helicopter rotor pinion. Paper presented at MS&T2017, Pittsburgh, United States. |
| Rachidi, R., El Kihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (04 October 2017). Wear Performance of Thermally Sprayed NiCrBSi and NiCrBSi - WC Coatings Under Two Different Wear Modes. Journal of Materials and Environmental Science, 8 (12), 4550 - 4559. Peer Reviewed verified by ORBi |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (2017). Optimization of the introduction of grain growth inhibitor in cemented carbides. Paper presented at Euro PM2017 Congress & Exhibition, Milano, Italy. |
Stanciu, V. I., Vitry, V., & Delaunois, F. (02 October 2017). Optimization Of The Introduction Of Grain Growth Inhibitor In Cemented Carbides. Paper presented at Euro PM2017 Congress & Exhibition, Milano, Italy. |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (19 September 2017). Influence of grinding speed and balls diameter on the microstructure of a WC-10% wt doped binder. Paper presented at RoPM&AM 2017, Cluj-Napoca, Romania. |
| Tosar, F., Vitry, V., Groulard, F., Mallet, L., & Delaunois, F. (05 September 2017). Study of stainless steel corrosion in pharmaceutical facilities: Initiation and development. Paper presented at EUROCORR2017, Prague, Unknown/unspecified. |
| Regad, Y., Elkihel, B., & Delaunois, F. (01 August 2017). Valorization and characterization of CCRs of the Jerada thermal power plant in the northeast of Morocco. International Journal of Engineering and Technology, 9 (4), 3292-3309. Peer reviewed |
| Bonin, L., Vitry, V., & Delaunois, F. (06 July 2017). Properties of Electroless Nickel-Boron coatings stabilized by bismuth salts. Paper presented at SMT31 - International Conference on Surface Modification Technologies, Mons, Belgium. |
Vitry, V., & Delaunois, F. (04 July 2017). Effect of SPS sintering on WC-Co powder densification. Poster session presented at 4ème Journée des Chercheurs de l'Institut Matériaux, UMONS, Belgium. |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (04 July 2017). Effect of SPS sintering on WC-Co powder densification. Poster session presented at 4ème Journée des Chercheurs de l'Institut Matériaux, UMONS, Belgium. |
Bonin, L., Vitry, V., & Delaunois, F. (04 July 2017). Replacement of the lead stabilizer in electroless nickel-boron baths. Paper presented at The 4th researchers workshop of the materials research institute, Mons, Belgium. |
| Delaunois, F., & Mario, S. (28 June 2017). Effects of sub-critical and heat treatments on microstructure and hardness evolution of various grades of wear resistant cast iron. Paper presented at IFHTSE17 (European Conference on Heat Treatment and Surface Engineering), Nice, Belgium. |
Vitry, V., Bonin, L., & Delaunois, F. (28 June 2017). Elimination du plomb dans un bain de nickel-bore chimique. Paper presented at Congrès A3TS, Nice, France. |
| Delaunois, F., & Mario, S. (27 June 2017). Effects of sub-critical and heat treatments on microstructure and hardness evolution of various grades of wear resistant cast iron. Paper presented at IFHTSE17 (European Conference on Heat Treatment and Surface Engineering), Nice, Belgium. |
| Delaunois, F., Bonin, L., & Vitry, V. (13 June 2017). Interest in composites formation to improve electroless nickel coatings properties. Paper presented at World Congress on Advanced Materials WCAM2017, Xi'an, China. |
| Bakdid, A., Bakari, D., Rrhioua, A., Elkihel, B., Nougaoui, A., & Delaunois, F. (01 June 2017). Welding control using ultrasonic multi-elements method. Journal of Materials and Environmental Science, 8 (10), 3483-3489. Peer Reviewed verified by ORBi |
| Avez, C., Coussement, G., Debailleux, L., Delaunois, F., Descamps, F., Ducobu, F., Dumont, E., Lupant, D., Rivière, E., & Vitry, V. (01 June 2017). Les techniques optiques de pointe au service de l'Ingénieur. Polytech.News, 55. |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (2017). Cobalt-inhibitor mixtures for cemented carbides. Paper presented at 19th Plansee Seminar 2017, Reutte, Austria. |
Rachidi, R., Elkihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (11 May 2017). Non-destructive Testing of Adhesion Defects in Thick Composite Coating by Active Infrared Thermography Technique. Poster session presented at International Conference on Civil Engineering and Materials (ICCEM'2017), Al Hoceima, Morocco. |
Rachidi, R., Elkihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (11 May 2017). Comparative Study of the Properties of WC Reinforced Ni-base Alloy Coatings Produced by Flame Spraying and by Laser Cladding. Paper presented at International Conference on Civil Engineering and Materials (ICCEM'2017), Al Hoceima, Morocco. |
| Vitry, V., Bonin, L., & Delaunois, F. (2017). Revêtements chimiques de nickel-bore, vers une formulation sans métaux lourds. Paper presented at Tricoat-Finishair 2017, Besançon, France. |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (04 May 2017). Influence de la vitesse de broyage et du diamètre de billes sur la microstructure d'un alliage WC-10%pds de cobalt dopé avec 1%pds de Cr3C2. Paper presented at PMF2017, Toulouse, France. |
Rachidi, R., Elkihel, B., & Delaunois, F. (11 April 2017). Influence of reinforcement particles in MMC coatings made by flame thermal spray technology. Poster session presented at 13ème congrès de mécanique (CMM2017), Meknès, Morocco. |
| Rachidi, R., Elkihel, B., Delaunois, F., & Deschuyteneer, D. (11 April 2017). Non-destructive testing of adhesion defects in Ni-WC coating by focused ultrasound using phased array probe and active infrared thermography methods. Paper presented at 7th International Conference on Industrial Engineering and Operations Management (IEOM), Rabat, Morocco. |
| Rachidi, R., Elkihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (11 April 2017). Anti-wear performance of NiCrBSi/NiCrBSi-WC coatings produced by flame thermal spraying process. Poster session presented at 13ème congrès de mécanique (CMM2017), Meknès, Morocco. |
| El Anouar, B. A., Elamrani, M., Elkihel, B., & Delaunois, F. (11 April 2017). Fault diagnosis of Rotating Machinery using Vibration Measurement: Application of the Wavelet Transform. Paper presented at International Conference on Industrial Engineering and Operations Management, Rabat, Morocco. |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (07 March 2017). Cobalt-inhibitors mixtures for cemented carbides. Poster session presented at Mardi des Chercheurs (MdC2017), Mons, Belgium. |
| Bonin, L., Vitry, V., & Delaunois, F. (07 March 2017). Electroless Nickel-Boron bath stabilized by bismuth salts: Effect of bismuth salts on the coatings. Poster session presented at Mardi des Chercheurs (MdC2017), Mons, Belgium. |
| Vitry, V., & Delaunois, F. (06 March 2017). Cobalt - inhibitors mixtures for cemented carbides. Poster session presented at Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium. |
| Bonin, L., Vitry, V., & Delaunois, F. (08 February 2017). Influence of the anionic part of the stabilizing agent on ENB coatings. Materials and Manufacturing Processes, 33 (2), 227-231. doi:10.1080/10426914.2017.1291949 Peer Reviewed verified by ORBi |
| Delaunois, F., Edwin, D., Marchal, Y., & Vitry, V. (01 January 2017). Accelerated aging and Portevin-Le Chatelier effect in AA 2024. Materials Science Forum, 879, 524-529. Peer reviewed |
Rachidi, R., Elkihel, B., Delaunois, F., & Vitry, V. (01 December 2016). Microstructure and Microhardness Properties of Flame Thermal Sprayed NiCrBSi Alloy and NiCrBSi-WC Composite Coatings. Paper presented at 1st International Conference on Materials and Environmental Science (ICMES2016), Oujda, Morocco. |
Vitry, V., Stanciu, V. I., & Delaunois, F. (26 October 2016). Some study on the milling parameters optimization in the direct carburization of WO3 by mechanical alloying. Paper presented at MS&T 2016, Salt Lake City, United States - Utah. |
Delaunois, F., Tosar, F., & Groulard, F. (2016). Study of the stainless steel corrosion in pharmaceutical facilities: development and incidence. Paper presented at MS&T 2016, Salt Lake City, United States - Utah. |
Delaunois, F., Stanciu, V. I., & Vitry, V. (26 October 2016). How different laboratories can obtain various results in the same case of failure ? Paper presented at MS&T 2016, Salt Lake City, United States - Utah. |
Jeffali, F., El Kihel, B., Nougaoui, A., & Delaunois, F. (19 October 2016). Surveillance et Diagnostic du Désalignement d'un Moteur Asynchrone par la Technique Thermographie Infrarouge. Paper presented at Colloque International sur le Monitoring des Systèmes Industriels, Fès, Morocco. |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (2016). Nanostructured Mix of Tungsten Carbide with Cobalt for Wear Parts. Paper presented at 2016 Powder Metallurgy World Congress, octobre 2016, Hamburg, Germany. |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (09 October 2016). Nanostructured mix of tungsten carbide with cobalt for wear parts. Poster session presented at 2016 Powder Metallurgy World Congress, octobre 2016, Hamburg, Germany. |
| Dawant, S., Daubie, E., Delaunois, F., Vitry, V., Colmant, S., & Stanciu, V. I. (2016). Etude de faisabilite de mesures d'epaisseur de nickel sur supports d'acier par fluorescence X. |
| Delaunois, F., Tshimombo, A., Stanciu, V. I., & Vitry, V. (10 September 2016). Contribution of acoustic emission to the monitoring of stress corrosion cracking of stainless steel: identification of the phases of the corrosion process and use of an accelerated test. Corrosion Science, 110, 273-283. Peer Reviewed verified by ORBi |
Stanciu, V. I., Vitry, V., & Delaunois, F. (05 July 2016). Influence of the speed and size of balls on the temperature during tungsten carbide production (WC) by mechanical alloying. Poster session presented at 3ème Journée de l'Institut Matériaux, Mons, Belgium. |
| Bonin, L., Vitry, V., & Delaunois, F. (2016). Influence of the anionic part of the surfactant on electroless nickel-boron coatings. Paper presented at XXX International Conference on Surface Modification Technologies (SMT30), Milan, Italy. |
Vitry, V., Bonin, L., & Delaunois, F. (31 May 2016). Can heat treatment improve duplex electroless nickel coatings? Paper presented at THERMEC'2016, Gratz, Austria. |
Jeffali, F., El Kihel, B., Nougaoui, A., Kerkour-El Miad, A., & Delaunois, F. (31 May 2016). Correction of influences on thermographic measurements for non-contact temperature measurement using infrared thermography. Journal of Theoretical and Applied Information Technology, 87 (3), 388-395. Peer reviewed |
Stanciu, V. I., Vitry, V., & Delaunois, F. (18 May 2016). Influence de la température sur la production de carbure de tungstène (WC) par mechanical alloying. Poster session presented at Matinée des Chercheurs 2016, Université de Valencienne, France. |
| Rrhioua, A., Bakari, D., El Kihel, B., Delaunois, F., & Manssouri, I. (2016). Nondestructive diagnosis of a particule accelerator for medical use. International journal of engineering sciences & research technology, 208-212. Peer reviewed |
Delaunois, F. (21 April 2016). Various cases of failure of ferrous alloys components after use. Paper presented at Les matériaux innovants et leurs applications, Oujda, Morocco. |
| Vitry, V., & Delaunois, F. (15 December 2015). Initiation of borohydride-reduced nickel boron plating on steels with various carbon and nickel content. Applied Surface Science, 359, 692-703. Peer Reviewed verified by ORBi |
Delaunois, F., & Vitry, V. (2015). Electroless Nickel-Boron Coatings Process, Composition, Microstructure and Properties. In Encyclopedia of Iron, Steel, and Their Alloys. Taylor & Francis Group, London. |
| Bakdid, A., El Kihel, B., Delaunois, F., & Nougaoui, A. (2015). Technique de Contrôle de la Soudure par la Méthode d'Ultrason Multi-éléments. Paper presented at CPI 2015 (Xème Conférence Internationale : Conception et Production Intégrées), Tanger, Morocco. |
Stanciu, V. I., Vitry, V., & Delaunois, F. (29 October 2015). Production of tungsten carbide nanopowders by mechanical alloying. Paper presented at 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium. |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (29 October 2015). Tungsten carbide powder obtained by direct carburization of tungsten trioxide using mechanical alloying method. Journal of Alloys and Compounds, 659, 302-308. Peer Reviewed verified by ORBi |
Stanciu, V. I., Vitry, V., & Delaunois, F. (28 October 2015). Direct Carburization Of Tungsten Trioxide By Mechanical Alloying. Advanced Materials Research, 1128, 51-57. doi:10.4028/www.scientific.net/AMR.1128.51 Peer reviewed |
Vitry, V., Tosar, F., Mallet, L., Bonin, L., & Delaunois, F. (08 October 2015). Characterization by XRD and TEM of various electroless nickel-boron deposits. Paper presented at Materials Science & Technology 2015, Columbus, United States. |
| Bonin, L., Vitry, V., & Delaunois, F. (2015). Leaching of hexavalent chromium from stainless steelmaking slags and the pH influence on the chromium mobility. Paper presented at SIPS2015 - Sustainable Industrial Processing Summit, Antalya, Turkey. |
Stanciu, V. I., Vitry, V., & Delaunois, F. (2015). Tungsten carbide nano powder obtained by mechanical alloying in high energy mill. Paper presented at SIPS2015 - Sustainable Industrial Processing Summit, Antalya, Turkey. |
Delaunois, F., Stanciu, V. I., & Vitry, V. (08 October 2015). Analysis and technical diagnostics of various cases of failure of ferrous alloys components after use. Paper presented at Materials Science & Technology 2015, Columbus, United States. |
Bonin, L., Vitry, V., & Delaunois, F. (11 September 2015). Damage of Ni-P/Ni-B duplex coatings, after diamond scratch tests. Poster session presented at BSM Annual Meeting 2015: When Materials Meet Biology, Mons, Unknown/unspecified. |
| Delaunois, F., Tosar, F., Vitry, V., & Hantson, A.-L. (2015). Incidence of microbial corrosion of metallic tubes in sanitary facilities. Paper presented at EUROCORR 2015, Graz, Austria. |
| Bonin, L., Vitry, V., & Delaunois, F. (07 September 2015). Electroless Ni-P/Ni-B Duplex Coatings: Microstructural and Mechanical Properties. Poster session presented at Mapping the Future of Materials Science, Paris, France. |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (2015). Broyage en milieu liquide d'un liant pour les carbures cémentés à base de cobalt dopé avec Cr3C2. Récents Progrès en Génie des Procédés, (107/2015). |
| Jeffali, F., El Kihel, B., Nougaoui, A., & Delaunois, F. (01 July 2015). Monitoring and diagnostic misalignment of asynchronous machines by infrared thermography. Journal of Materials and Environmental Science, 6 (4), 1192-1199. Peer Reviewed verified by ORBi |
Vitry, V., & Delaunois, F. (2015). Electroless nickel-phosphorous Vs electroless nickel-boron: comparison of hardness, abrasion resistance, scratch test response and corrosion behavior. In Comprehensive Guide for Nanocoatings Technology, Volume 1: Deposition and Mechanism (pp. 145-173). Nova Science Pub Inc. |
Vitry, V., & Delaunois, F. (2015). Nanostructured Electroless nickel-boron deposition: initiation mechanism and formation, effect of bath chemistry modification. In Comprehensive Guide for Nanocoatings Technology: Volume 3: Properties and Development (pp. 283-308). Nova Science Pub Inc. |
Vitry, V., Bonin, L., & Delaunois, F. (2015). Microstructural, mechanical and tribological properties of electroless duplex NiP/NiB coatings on steel. Paper presented at SMT29, Copenhagen, Denmark. |
Vitry, V., Tosar, F., Bonin, L., & Delaunois, F. (09 June 2015). Microstructural and mechanical characterization of mono and bi-layer electroless nickel coatings. Paper presented at SurFin 2015, Rosemont, United States. |
Regad, Y., El Kihel, B., & Delaunois, F. (2015). Valorisation et caractérisation des déchets du Charbon : Application pour la centrale thermique de JERADA-Maroc. Paper presented at Congrès International de Génie Industriel et Management des Systèmes 2015 (CIGIMS'2015), Fès, Morocco. |
Benbouaza, A., El Kihel, B., & Delaunois, F. (2015). Diagnostic des défauts d'engrenage par analyse vibratoire. Paper presented at Congrès International de Génie Industriel et Management des Systèmes 2015 (CIGIMS'2015), Fès, Morocco. |
Jeffali, F., El Kihel, B., Nougaoui, A., & Delaunois, F. (2015). Diagnostic de la Machine Asynchrone Triphasée par la Technique Thermographie Infrarouge. Paper presented at Congrès International de Génie Industriel et Management des Systèmes 2015 (CIGIMS'2015), Fès, Morocco. |
Rrhioua, A., El Kihel, B., Bakari, D., & Delaunois, F. (2015). Diagnostic non destructif d'un accélérateur de particules à vocation médicale. Paper presented at Congrès International de Génie Industriel et Management des Systèmes 2015 (CIGIMS'2015), Fès, Morocco. |
| Bonin, L., Vitry, V., & Delaunois, F. (08 May 2015). Comparison of different batch leaching tests on steelmaking slags. Poster session presented at NANOWAL (The Wallonia Network for Nanotechnologies) and MAIN (The MAterials, Interfaces and Nanostructures Doctoral School) on Nanomaterials and Energy, Mons, Belgium. |
Stanciu, V. I., Vitry, V., & Delaunois, F. (08 April 2015). Broyage en milieu liquide d'un liant pour les carbures cémentés à base de cobalt dopée avec Cr3C2. Poster session presented at colloque STPMF 2015, Nancy, France. |
Jeffali, F., El Kihel, B., Nougaoui, A., & Delaunois, F. (29 March 2015). Mise en évidence de la consommation d'énergie d'un moteur asynchrone triphasée en introduisant de défauts d'alignement. Poster session presented at 1st International Conference on Applied Automation and Industrial Diagnostics, Djelfa, Algeria. |
Bonin, L., Vitry, V., & Delaunois, F. (18 March 2015). Comparison of different batch leaching tests on steelmaking slags. Paper presented at Recycling 2015, Metz, France. |
| Stanciu, V. I., Vitry, V., & Delaunois, F. (10 March 2015). Some aspects of the production of nano tungsten carbide powder (WC) by mechanical alloying. Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium. |
| Bonin, L., Vitry, V., & Delaunois, F. (10 March 2015). Comparison of different batch leaching tests on steelmaking slags. Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium. |
Stanciu, V. I., Vitry, V., & Delaunois, F. (06 March 2015). Direct Carburization Of Tungsten Trioxide By Mechanical Alloying. Paper presented at BRAMAT, Brasov, Romania. |
Delaunois, F. (2015). La canette de boisson a 80 ans. |
Boumerzoug, Z., Remli, F., & Delaunois, F. (01 January 2015). Effect of cutting speed during turning of low carbon steel on mechanical properties and surface roughness. Advanced Materials Research, 1096, 340-345. |
Vitry, V., & Delaunois, F. (2014). Nanostructured electroless nickel-boron coatings for wear resistance. In Anti-Abrasive Nanocoatings: Current and future applications (pp. 157-200). Woodhead Publishing. |
Delaunois, F., Stanciu, V. I., Mario, S., & Vitry, V. (28 November 2014). Caractérisation d'une fonte à haut chrome alliée au niobium pour des cylindres de laminoir. Paper presented at Matériaux 2014, Montpellier, France. |
Rachidi, R., El Kihel, B., Delaunois, F., & Vitry, V. (26 November 2014). Etude microstructurale des revêtements WC-Co déposés par cladding laser sur l'acier avec différentes teneurs en Co. Paper presented at Matériaux 2014, Montpellier, France. |
Stanciu, V. I., Vitry, V., & Delaunois, F. (25 November 2014). Broyage par voie humide d'une poudre de cobalt dopé avec Cr3C2 en tant que liant dans les carbures cémentés. Poster session presented at Matériaux 2014, Montpellier, France. |
Tosar, F., Delaunois, F., & Hantson, A.-L. (25 November 2014). Etudes bioélectrochimiques de la corrosion des aciers galvanisés employés dans les systèmes de distribution d'eau sanitaire. Poster session presented at Matériaux 2014, Montpellier, France. |
Vitry, V., Tosar, F., & Delaunois, F. (24 November 2014). Etude de l'initiation et de la formation de dépôts chimiques de nickel-bore sur divers substrats ferreux. Paper presented at Matériaux 2014, Montpellier, France. |
Delaunois, F., Tshimombo, A., Stanciu, V. I., & Vitry, V. (14 October 2014). Contribution of acoustic emission to the monitoring of stress corrosion cracking of stainless steel: identification of the phases of the corrosion process and use of an accelerated test. Paper presented at Materials Science & Technology 2014, Pittsburgh, United States. |
Vitry, V., Tosar, F., & Delaunois, F. (08 September 2014). Study of corrosion resistance of electroless duplex NiP/NiB coatings in different media by potentiodynamic polarisation and SEM observation. Paper presented at EUROCORR 2014, Pise, Italy. |
Vitry, V., Steve, N., Breyer, J.-P., Sinnaeve, M., & Delaunois, F. (2014). Study of the microstructure of two centrifugal cast high speed steels destined for hot strip mills applications. Paper presented at Abrasion 2014, Stockholm, Sweden. |
Delaunois, F. (12 June 2014). Comprendre les aciers inoxydables, leurs structures, leurs propriétés. Paper presented at Journée d'étude VOM-PROMOSURF, Le Roeulx, Belgium. |
| Delaunois, F., Tosar, F., & Vitry, V. (01 June 2014). Corrosion Behaviour and Biocorrosion of Galvanized Steel Water Distribution Systems. Bioelectrochemistry, 97 (c), 110-119. Peer Reviewed verified by ORBi |
Stanciu, V. I., Vitry, V., & Delaunois, F. (2014). A ready to use Cr3C2 doped cobalt powder as binder in cemented carbides. Paper presented at Metal2014, Brno, Unknown/unspecified. |
| Vitry, V., & Delaunois, F. (2014). Corrosion protection of steel and aluminium alloys by electroless nickel-boron and duplex electroless NiP-NiB coatings. Paper presented at IMTCE 2014 - International Symposium on Corrosion & Materials Degradation 2014, Kuala Lumpur, Malaysia. |
Vitry, V., Tosar, F., & Delaunois, F. (03 May 2014). Mechanical properties, wear and scratch test resistance of various electroless nickel deposits. Paper presented at ICMCTF, San Diego, United States - California. |
| Vitry, V., Sens, A., & Delaunois, F. (25 April 2014). Comparison of various electroless nickel coatings on steel: structure, hardness and abrasion resistance. Materials Science Forum, 783-786, 1405-1413. |
Tshimombo, A., Idrissi, H., Ahuka, A., Vitry, V., & Delaunois, F. (01 March 2014). 'Etude de l'influence de la contrainte appliquée à l'éprouvette en corrosion sous tension suivie par émission acoustique'. 'Congo Sciences Journal en Ligne de l'ACASTI et du CEDESURK ', 2 (1), 10-16. |
| Vitry, V., & Delaunois, F. (07 February 2014). Revêtements de nickel chimique: propriétés mécaniques et tribologiques des dépôts au bore et au phosphore. Paper presented at Journée Technique île de France et assemblée générale A3TS, Paris, France. |
| Elmaati, H., Benbouaza, A., Elkihel, B., & Delaunois, F. (01 December 2013). Implementation of a Vibration monitoring system of a steam turbine for optimization of the maintenance. International Journal of Emerging Trends & Technology in Computer Science, 2 (6), 240-245. Peer reviewed |
| Vitry, V., Denollin, G., & Delaunois, F. (2013). Observation of the structure and defects of ASTM A387 grade 22 steel solidified by continuous casting. Paper presented at 19th IAS steel conference, Rosario, Argentina. |
Delaunois, F. (2013). La bleusaille à la Polytech de l'UMONS. |
Delaunois, F., Sens, A., & Vitry, V. (01 September 2013). Do Nickel and Nickel Alloys Actually Passivate in Various Media? Paper presented at EUROCORR2013, Estoril, Portugal. |
Delaunois, F., Sens, A., & Vitry, V. (03 June 2013). Evolution de la chimie d'un bain de nickel-bore en cours de dépôt. Paper presented at A3TS Marseille 2013 - TRAITEMENT DES MATERIAUX ET DES SURFACES - Perspectives 2020, Marseille, France. |
| Elmaati, H., Benbouaza, A., Elkihel, B., & Delaunois, F. (01 June 2013). Development of a vibration monitoring system for optimization of the electrical energy production. International Journal on Computer Science and Engineering, 5 (6), 578-589. Peer reviewed |
Regad, Y., Elkihel, B., Benbouazza, A., Azzaoui, H., Delaunois, F., & Dagrain, F. (2013). Quantification de la résistance à l'usure abrasive des pastilles en diamant. Paper presented at 11ème Congrès de Mécanique, Agadir, Morocco. |
Vitry, V., Aubert, A., & Delaunois, F. (04 April 2013). Implementing an evidence-based reform of a Material engineering curriculum. Poster session presented at 5th International Symposium on Materials Education, Cambridge, United Kingdom. |
| Vitry, V., Sens, A., & Delaunois, F. (01 April 2013). Experimental study on the formation of electroless nickel-boron coatings from borohydride-reduced bath on mild steel. Products Finishing, 77 (7), 14-15. Peer reviewed |
| Benbouaza, A., El Kihel, B., & Delaunois, F. (01 April 2013). Analysis and diagnosis of the different defects of asynchronous machines by vibration analysis. International Journal on Computer Science and Engineering, 5 (4), 258-269. Peer reviewed |
Demelenne, M., Scaillet, J.-C., Bossiroy, D., Hayen, R., VanParys, L., Descamps, T., Noël, J., Sens, A., & Delaunois, F. (12 March 2013). Experimenting a medieval kiln for outlining specificities in the properties of ancient limes. Poster session presented at Matinée des chercheurs ( MDC'2013), Mons, Belgium. |
Vitry, V., Sens, A., & Delaunois, F. (12 March 2013). Abrasion resistance of steel coated with various chemical nickel deposit. Poster session presented at 7ième Matinée des Chercheurs, Mons, Belgium. |
| Stanciu, V. I., & Delaunois, F. (12 March 2013). The production of hard alloys by mechanical synthesis and SPS : To develop nanocrystallinecomposites based on WC-Co with a grain size <100 nmThe. Poster session presented at 7ième Matinée des Chercheurs, Mons, Belgium. |
| Benbouaza, A., El Kihel, B., & Delaunois, F. (01 December 2012). Comparison of different methods for the detection bearing faults. Journal of computer science and engineering, 16 (2), 1-6. Peer reviewed |
| Vitry, V., Sens, A., Kanta, A. F., & Delaunois, F. (01 November 2012). Experimental study on the formation and growth of electroless nickel-boron coatings from borohydride-reduced bath on mild steel. Applied Surface Science, 263, 640-647. Peer Reviewed verified by ORBi |
Delaunois, F., Sens, A., & Vitry, V. (09 September 2012). Corrosion behaviour and Biocorrosion of Galvanized Steel Water Distribution Systems. Paper presented at EUROCORR 2012, Istanbul, Turkey. |
Vitry, V., Sens, A., & Delaunois, F. (27 July 2012). Abrasion resistance of steel coated with various chemical nickel deposit. Poster session presented at Junior Euromat, Lausanne, Switzerland. |
Vitry, V., Kanta, A. F., & Delaunois, F. (20 June 2012). Evolution of reactive concentration during borohydride-reduced electroless nickel-boron plating and design of a replenishment procedure. Industrial and Engineering Chemistry Research, 51 (27), 9227-9234. Peer Reviewed verified by ORBi |
| Vitry, V., Sens, A., & Delaunois, F. (2012). Experimental study on the formation of electroless nickel-boron coatings from borohydride-reduced bath on mild steel. Paper presented at SurFin 2012, Las Vegas, United States - Nevada. |
Vitry, V., Sens, A., & Delaunois, F. (08 June 2012). Surface reinforcement of steel substrate by electroless nickel-boron. Paper presented at 1st World Conference on Advanced Materials, Beijing, China. |
| Vitry, V., Sens, A., & Delaunois, F. (2012). Initial deposition of electroless nickel from borohydride-reduced bath on various ferrous alloys. Paper presented at Metal 2012, Brno, Unknown/unspecified. |
Benbouaza, A., El Kihel, B., & Delaunois, F. (25 May 2012). Analysis and diagnosis of the different defects of the bearings and gearings by vibration analysis. Poster session presented at 2SCS'12 (nternational Symposium on Security and Safety of Complex Systems), Agadir, Morocco. |
Vitry, V., Sens, A., & Delaunois, F. (11 May 2012). Abrasive wear resistance of steel coated with various electroless nickel coatings. Poster session presented at Journées Internationales Francophones de Tribologie, Aix-en-Provence, France. |
Benbouaza, A., El Kihel, B., & Delaunois, F. (01 May 2012). Analysis and diagnosis of the different defects of the bearings and gearings by vibration analysis. Journal of computer science and engineering, 13 (1), 29-34. Peer reviewed |
| Benbouaza, A., El Kihel, B., & Delaunois, F. (2012). Analyse et diagnostic des différents défauts des roulements et engrenages par analyse vibratoire. Paper presented at CIGIMS 2012 (Congrès International en Génie Industriel et Management des Systèmes), Fès, Morocco. |
Delaunois, F., Aubert, A., & Vitry, V. (14 April 2012). Is there a future for teaching metallurgy in Belgium? Poster session presented at Materials Education Symposium, Cambridge, United Kingdom. |
| Delaunois, F., Stanciu, V. I., Denollin, G., & Vitry, V. (01 March 2012). Structure and defects of ASTM A387 grade 22 steel solidified by continuous casting. Poster session presented at La Matinée des chercheurs 2012, Bruxelles , Belgium. |
| Vitry, V., Kanta, A. F., & Delaunois, F. (28 February 2012). Application of nitriding to electroless nickel-boron coatings: Chemical and structural effects; Mechanical characterization; Corrosion resistance. Materials and Design, 39, 269-278. Peer Reviewed verified by ORBi |
| Vitry, V., Kanta, A. F., Dille, J., & Delaunois, F. (11 February 2012). Structural state of electroless nickel-boron deposits (5 wt. % B): re-characterization by XRD and FIB-TEM. Surface and Coatings Technology, 206, 3444-3449. Peer Reviewed verified by ORBi |
| Vitry, V., Sens, A., Kanta, A. F., & Delaunois, F. (11 February 2012). Wear and corrosion resistance of heat treated and as-plated Duplex NiP/NiB coatings on 2024 aluminium alloys. Surface and Coatings Technology, 206, 3421-3427. Peer Reviewed verified by ORBi |
| Vitry, V., Nardone, S., Breyer, J.-P., Sinnaeve, M., & Delaunois, F. (01 February 2012). Microstructure of two centrifugal cast high speed steels for hot strip mills applications. Materials and Design, 34, 372-378. Peer Reviewed verified by ORBi |
| Vitry, V., Kanta, A. F., Sens, A., & Delaunois, F. (01 January 2012). Tribological characterization of electroless nickel-boron coatings. Advanced Materials Research, 409, 808-813. |
| Vitry, V., Kanta, A. F., & Delaunois, F. (25 December 2011). Mechanical and wear characterization of electroless nickel-boron coatings. Surface and Coatings Technology, 206, 1879-1885. Peer Reviewed verified by ORBi |
| Idrissi, B., El Kihel, B., & Delaunois, F. (2011). La contribution du facteur humain dans la prise de décision au sein du système de la gestion de maintenance. Paper presented at CPI 2011 (Conférence Internationale de Conception et Production Intégrée), Oujda, Morocco. |
| louhib, S., El Kihel, B., & Delaunois, F. (2011). Modélisation des structures soumises au séisme. Paper presented at CPI 2011 (Conférence Internationale de Conception et Production Intégrée), Oujda, Morocco. |
Mdehheb, Z., El Kihel, B., Lahsini, M., Bouamama, R., & Delaunois, F. (2011). Impact de l'implantation du système de management environnemental sur les performances économiques de l'entreprise. Paper presented at CPI 2011 (Conférence Internationale de Conception et Production Intégrée), Oujda, Morocco. |
| Benbouaza, A., El Kihel, B., & Delaunois, F. (2011). Diagnostic des défauts des roulements par analyse vibratoire. Paper presented at CPI 2011 (Conférence Internationale de Conception et Production Intégrée), Oujda, Morocco. |
Delaunois, F. (2011). RTL/TVI : journal parlé de 13h et de 19h : Fin de la phase à chaud à ArcelorMittal Liège. |
| Boumerzoug, Z., Raouache, E., & Delaunois, F. (01 October 2011). Thermal cycle simulation of welding process in low carbon steel. Materials Science & Engineering : A, 530, 191-195. Peer reviewed |
| Vitry, V., Kanta, A. F., & Delaunois, F. (13 September 2011). Synthesis of nanocrystalline Ni-B alloy by electroless deposition and effect of heat treatments on their structural state. Paper presented at Euromat 2011, Montpellier, France. |
| Sens, A., Kanta, A. F., Vitry, V., & Delaunois, F. (13 September 2011). Corrosion resistance of electroless Ni-B coatings in sodium chloride, and alkaline and acid media. Poster session presented at Euromat 2011, Montpellier, France. |
Delaunois, F., Sinnaeve, M., Breyer, J.-P., & Vitry, V. (2011). Effects of Ti, V and Nb carbide on the properties of ICDP cast iron finishing rolls. Paper presented at Abrasion 2011, Liège, Belgium. |
Vitry, V., Dagrain, F., Delaunois, F., & VanParys, L. (07 July 2011). Characterization of the consolidation effect of ethyl silicate on Maastricht limestone. Paper presented at ConserStone 2011 - Conservation of Stone Heritage, Orléans, France. |
| Vitry, V., Kanta, A. F., & Delaunois, F. (2011). Mechanical and wear characterization of electroless nickel-boron coatings. Paper presented at ICMCTF 2011, San Diego, United States - California. |
| Vitry, V., Kanta, A. F., & Delaunois, F. (15 December 2010). Initiation and formation of electroless nickel-boron coatings on mild steel: effect of substrate roughness. Materials Science and Engineering: B, Solid-State Materials for Advanced Technology, 175, 266-273. Peer Reviewed verified by ORBi |
Sens, A., & Delaunois, F. (01 November 2010). Inverse chill in cast iron. Poster session presented at Ecole doctorale MAIN, Mons, Belgium. |
| Vitry, V., Kanta, A. F., & Delaunois, F. (01 October 2010). Influence of local composition on morphology of electroless nickel-boron deposits on mild steel. Praktische Metallographie, 42, 315-320. |
| Kanta, A. F., Poelman, M., Vitry, V., & Delaunois, F. (27 August 2010). Nickel-boron electrochemical properties investigations. Journal of Alloys and Compounds, 505 (1) (27), 151-156. Peer Reviewed verified by ORBi |
| Kanta, A. F., Vitry, V., & Delaunois, F. (2010). Effect of wear and heat treatments on the corrosion resistance of electroless nickel-boron coated mild steel. Paper presented at Conference on Corrosion and Materials Protection, Prague, Czechia. |
| Delaunois, F., Quoirin, G., & Richeux, G. (2010). Corrosion and Biocorrosion of Galvanized Steel Tubes Used in Water Distribution Systems. Paper presented at Conference on Corrosion and Materials Protection, Prague, Czechia. |
| Kanta, A. F., Vitry, V., & Delaunois, F. (01 January 2010). Wear and Corrosion Resistance of Electroless Nickel-Boron Coated Mild Steel. Materials Science Forum, 638-642, 846-851. Peer reviewed |
| Kanta, A. F., Vitry, V., & Delaunois, F. (31 December 2009). Effect of thermochemical and heat treatments on electroless nickel-boron. Materials Letters, 63 (30), 2662-2665. Peer Reviewed verified by ORBi |
| Vitry, V., & Delaunois, F. (2009). How heat treatment can give better properties to electroless nickel-boron coatings. Metallurgia Italiana, (Avril 2009), 49-54. |
Vitry, V., Kanta, A. F., & Delaunois, F. (17 March 2009). Initiation and formation of electroless nickel-boron deposits on steel. Poster session presented at Matinée des chercheurs 2009, Mons, Belgium. |
Vitry, V., & Delaunois, F. (01 September 2008). How heat treatment can give better properties to electroless nickel-boron coatings. Paper presented at Journée des doctorants de l'Ecole Doctorale, Liège, Belgium. |
| Delaunois, F., & Guerlement, G. (2008). Etude de la corrosion de tuyaux en acier galvanisé utilisés en sanitaire. VOM Info, 8-12. |
| Vitry, V., Delaunois, F., & Dumortier, C. (2008). How heat treatment can give better properties to electroless nickel-boron coatings. Paper presented at European Conference on Heat Treatment 2008, Vérone, Italy. |
| Vitry, V., Delaunois, F., & Dumortier, C. (01 April 2008). Mechanical properties and scratch test resistance or nickel-boron coated aluminium alloy after heat treatments. Surface and Coatings Technology, 202 (14), 3316-3324. Peer Reviewed verified by ORBi |
| Vitry, V., & Delaunois, F. (2008). A study of mechanical and tribological properties of electroless nickel-boron deposits after heat and thermochemical treatments. Paper presented at Friction, wear and wear protection 2008, Aix-la-Chapelle, Germany. |
| Delaunois, F., & Guerlement, G. (2008). Study of the Corrosion of Galvanized Steel Tubes Used in Water Distribution Systems. Chimie Nouvelle, (numéro spécial SRC-info 2008), 15-20. Peer reviewed |
Vitry, V., & Delaunois, F. (26 February 2008). Electroless Nickel-Boron(-Pb) coatings : study of deposition, properties and heat treatments. Paper presented at Matinée des Chercheurs 2008, Bruxelles, Belgium. |
Delaunois, F., De Longueville, T., & Marchal, Y. (26 February 2008). Intergranular corrosion susceptibility of AlMg alloys exposed at medium temperatures. Paper presented at Matinée des Chercheurs 2008, Bruxelles, Belgium. |
| Delaunois, F., & Guerlement, G. (2007). Installations sanitaires ; l'acier galvanisé à chaud au trempé dévoile ses atouts. Galvano Organo, Traitements de Surface, (771), 26-29. |
| Gobert, C., D'Alfonso, A., Delaunois, F., & Dumortier, C. (2007). Evolution of ferrite content of continuously cast slabs of 2205 duplex stainless steel. Paper presented at Duplex 2007, Grado, Italy. |
| Lecomte-Beckers, J., Delaunois, F., Breyer, J.-P., & Tchoufang Tchuindjang, J. (2007). Metallurgical assessment of two HSS rolls grades for Hot Strip Mill. Paper presented at AISTech 2007 Conference, Indianapolis, United States - Indiana. |
Vitry, V., & Delaunois, F. (01 April 2007). A study of mechanical and tribological properties of nickel-boron coated aluminium alloys. ATB Métallurgie, 45 (1-4), 353-358. Peer reviewed |
| Vitry, V., Delaunois, F., & Dumortier, C. (01 April 2007). Improvement of hardness and mechanical properties of electroless nickel-boron deposits by thermochemical treatment. Journal of Applied Surface Finishing, 2 (2), 106-111. Peer reviewed |
| Gobert, C., D'Alfonso, A., Delaunois, F., & Dumortier, C. (2006). Oxydation à haute température des aciers inxoydables. Effet de l'état de surface sur le comportement à l'oxydation. Paper presented at Matériaux 2006, Dijon, France. |
| Vitry, V., & Delaunois, F. (2006). Improvement of hardness and mechanical properties of electroless nickel-boron deposits by thermochemical treatment. Paper presented at Sur/fin 2006, Milwaukee, United States. |
| Vitry, V., & Delaunois, F. (02 May 2006). Study of hardness and mechanical properties of electroless nickel-boron coatings on various substrates after thermochemical treatment. Algerian Journal of Advanced Materials, 3, 111-115. |
| Vitry, V., & Delaunois, F. (2006). Nitridation treatments to improve the hardness and mechanical properties of electroless nickel-boron deposits. Paper presented at IFHTSE 15 and SMT20 (International Federation of Heat Treating and Surface Finishing 15 and Surface Modification Treatments 20 Congress), Vienne, Austria. |
Dumortier, C., D'Alfonso, A., & Delaunois, F. (2005). Characterisation and control of mould fluxes used for the continuous casting of steel. Paper presented at 15th IAS Steelmaking Conferences, San Nicolas, Argentina. |
Dumortier, C., Riquier, Y., Lehert, P., Delaunois, F., & D'Alfonso, A. (2005). Elaboration des métaux : Bases théoriques, exercices et applications informatiques. Editions ACCO LEUVEN. |
| Delaunois, F. (01 January 2004). Influence de la découpe laser CO2 sur les alliages d'aluminium utilisés en aéronautique: 2ème partie. ATB Métallurgie, 44 (1-2), 23-31. |
| Delaunois, F. (01 January 2004). Influence de la découpe laser CO2 sur les alliages d'aluminium utilisés en aéronautique: 1ère partie. ATB Métallurgie, 44 (1-2), 18-22. |
| Delaunois, F., Liénard, P., & Petitjean, J.-P. (2003). Autocatalytic electroless nickel-boron plating on aluminium alloys. Paper presented at Aluminium Two Thousand 5th World Congress, Rome, Italy. |
Delaunois, F. (2002). Les dépôts chimiques de nickel-bore sur alliages d'aluminium. Unpublished doctoral thesis, Université de Mons. Jury: . |
| Delaunois, F., & Liénard, P. (2002). Heat treatments for electroless nickel-boron plating on aluminium alloys. Surface and Coatings Technology, (160), 239-248. Peer Reviewed verified by ORBi |
Delaunois, F. (2001). Les dépôts chimiques auto-catalytiques de nickel-bore sur alliages d'aluminium. Paper presented at Les nickels chimiques, revêtements anticorrosion et anti-usure, Gosselies, Belgium. |
| Delaunois, F. (2001). Autocatalytic electroless nockel-boron plaing on light alloys. Paper presented at PhD Student's Day - VITO, . |
| Delaunois, F., Jacob-Dulière, M., Liénard, P., & Petitjean, J.-P. (2000). Autocatalytic electroless nickel-boron platin of light alloys. Surface and Coatings Technology, (124), 201-209. Peer Reviewed verified by ORBi |
| Delaunois, F. (01 January 1999). Importance des dépôts chimiques autocatalytiques de nickel-bore. ATB Métallurgie, 39 (1-2), 27-34. |
| Delaunois, F., Poulain, V., & Petitjean, J.-P. (1997). A pretreatment against localized and filiform corrosion applied to aluminium alloys : the trivalent chromium pretreatment. Paper presented at International Symposium on Aluminium Surface Science and Technology, Anvers, Belgium. |
| Delaunois, F., Poulain, V., & Petitjean, J.-P. (02 May 1997). The trivalent chromium pretreatment applied to aluminium 1050. Materials Science Forum, 242, 213-218. |
| Delaunois, F., Poulain, V., & Petitjean, J.-P. (01 May 1997). Le prétraitement au chrome trivalent appliqué aux alliages d'aluminium. Galvano Organo, Traitements de Surface, 676, 423-426. |
| Delaunois, F., Poulain, V., & Petitjean, J.-P. (1996). The trivalent chromium pretreatment applied to aluminium alloys. Paper presented at EUROCORR 1996, Nice, France. |
| Delaunois, F., Poulain, V., & Petitjean, J.-P. (1996). The trivalent chromium pretreatment applied to aluminium 1050. Paper presented at 5th International Conference on Aluminium Alloys ICAA5, Grenoble, France. |
