Profil

Vitry Véronique

Université de Mons - UMONS > Faculté Polytechnique > Service de Métallurgie

Université de Mons - UMONS > Faculté Polytechnique > Métallurgie

ORCID
0000-0002-9155-7271

Main Referenced Co-authors
DELAUNOIS, Fabienne  (178)
Bonin, Luiza  (63)
STANCIU, Victor Ioan  (47)
MEGRET, Alexandre  (28)
Yunacti, Muslum  (18)
Main Referenced Keywords
SPS (4); WC-Co (4); Cemented carbides (3); cobalt (3); ferrous alloys (3);
Main Referenced Unit & Research Centers
CRIM - Ingénierie des matériaux (201)
AGIF - Algèbre, Géométrie et Interactions fondamentales (1)
URBAINE - Urbanisation Revitalisation Bâtiment Architecture Innovations Espaces (1)
Main Referenced Disciplines
Materials science & engineering (189)
Chemistry (132)
Mechanical engineering (74)
Physics (54)
Geological, petroleum & mining engineering (25)

Publications (total 277)

The most downloaded
42 downloads
Bonin, L., Vitry, V., & Delaunois, F. (15 November 2020). Inorganic salts stabilizers effect in electroless nickel-boron plating: Stabilization mechanism and microstructure modification. Surface and Coatings Technology, 401. https://hdl.handle.net/20.500.12907/24343
The most cited
92 citations (Scopus®)
Vitry, V., Delaunois, F., & Dumortier, C. (01 April 2008). Mechanical properties and scratch test resistance or nickel-boron coated aluminium alloy after heat treatments. Surface and Coatings Technology, 202 (14), 3316-3324. https://hdl.handle.net/20.500.12907/35307

Mégret, A., Vitry, V., & Delaunois, F. (February 2023). The effect of boron-doped cobalt additions on mechanical properties of a recycled WC-Co powder. International Journal of Refractory Metals and Hard Materials, 111, 106098. doi:10.1016/j.ijrmhm.2022.106098
Peer Reviewed verified by ORBi

Yazdani, S., Chapon, P., Dupont, V., & VITRY, V. (2023). Role of CTAB surfactant on electroless Ni–B deposition and its mechanical and corrosion behaviour. Surface Engineering, 1-11. doi:10.1080/02670844.2022.2162564
Peer Reviewed verified by ORBi

Vitry, V.* , Mégret, A., Khalid, H. A., Staia, M. H., Montagne, A., & Yunacti, M.*. (20 December 2022). Selection of New Heat Treatment Conditions for Novel Electroless Nickel-Boron Deposits and Characterization of Heat-Treated Coatings. Coatings, 13 (1), 1. doi:10.3390/coatings13010001
Peer Reviewed verified by ORBi

Vitry, V. (2022). Nickelage chimique, mécanismes et nouveaux développements. Paper presented at Journée technique A3TS France-Nord Belgique - le nickel dans les traitements de surface, LIège, Belgium.

Mégret, A., Vitry, V., & Delaunois, F. (26 October 2022). Etudes thermodynamique et mécanique de nouveaux liants pour les carbures de tungstène. Paper presented at Matériaux 2022, Lille, France.
Editorial reviewed

Vitry, V., Montagne, A., & staia mariana henriette. (05 October 2022). Tribocorrosion properties of electroless nickel-boron coatings from stabilizer-free bath. Paper presented at International Material and Metallurgical Engineering, Istanbul, Turkey.

Yunacti, M., Mégret, A., Montagne, A., & Vitry, V. (October 2022). Effets des traitements thermiques sur les propriétés mécaniques et tribologiques de revêtements chimiques nickel-bore innovants. Paper presented at Matériaux 2022, Lille, France.

Vitry, V. (October 2022). Lixiviation des métaux contenus dans les DEEE par des mélanges eutectiques profonds. Poster session presented at Matériaux 2022, Lille, France.

Vitry, V. (2022). La sidérurgie Wallonne - Passé, présent, futur. Paper presented at réunion mensuelle de septembre - Rotary de Mons, Mons, Belgium.

Vitry, V., Papanaoum, M., Mégret, A., & Delaunois, F. (13 September 2022). Even failure analysts can blow things up, it seems. Paper presented at IMAT 2022, New Orleans, United States - Louisiana.

Gratton, G., & Vitry, V. (13 September 2022). Unexpected failures modes, or how aeroplanes can bite in very mysterious ways. Paper presented at IMAT 2022, New Orleans, United States - Louisiana.

Delaunois, F., Mégret, A., & Vitry, V. (13 September 2022). Teaching good practices in Failure Analysis to students to help them react efficiently to damage in their professional career. Paper presented at IMAT2022, New Orleans, United States.
Editorial reviewed

Mégret, A., Leclef, A., Vitry, V., & Delaunois, F. (06 September 2022). Thermodynamic and mechanical investigations of novel binders for cemented carbides. Poster session presented at Mardi des Chercheurs 2022 (MdC2022), Mons, Belgium.

Yunacti, M., Vitry, V., & Montagne, A. (06 September 2022). Electroless nickel-boron coatings thickness measurement by means of Calo tester. Paper presented at Mardi des Chercheurs 11éme edition, mons, Belgium.

Yazdani, S., & Vitry, V. (September 2022). Effect of nanodiamonds on mechanical properties of electroless Ni-B-nanodiamond coating. Paper presented at Mardi des chercheurs 2022.

Akbarzadeh, S., Vitry, V., & Olivier, M.-G. (31 August 2022). Smart hybrid coating reinforced with modified clay nano reservoirs for the plasma electrolytic oxidation (PEO) layer on AA2024. Paper presented at EUROCORR2022.
Peer reviewed

Vitry, V., Yunacti, M., & Montagne, A. (30 August 2022). Effect of replenishment process on the properties of electroless nickel-boron deposits from a stabilizer-free bath. Paper presented at Eurocorr 2022, Berlin, Germany.

Yunacti, M., Vitry, V., & Montagne alex. (10 June 2022). Les propriétés mécaniques et tribologiques des revêtements du type Chrome VI, NiW électrolytique et revêtements chimique NiB. Paper presented at Journée LGCgE (Laboratoire de Génie et géoEnvironnement), Lille, France.

Mégret, A., Vitry, V., & Delaunois, F. (2022). The effect of boron-doped cobalt additions on mechanical properties of a recycled WC-Co powder. Proceeding of 20th Plansee Seminar.

Vitry, V. (2022). Les revêtements de nickel chimique. VOM info, (JUIN), p. 35-36.

Vitry, V. (2022). De l'hydrogène à l'acier vert. Paper presented at Assemblée générale de la section montoise de l'AIMs Polytech Mons alumni, Mons, Belgium.

Mégret, A., Vitry, V., & Delaunois, F. (01 April 2022). High-energy ball milling of WC-10Co: Effect of the milling medium and speed on the mechanical properties. International Journal of Refractory Metals and Hard Materials, 104. doi:https://doi.org/10.1016/j.ijrmhm.2021.105774
Peer Reviewed verified by ORBi

Akbarzadeh, S., Sopchenski, L., Vitry, V., Paint, Y., & Olivier, M.-G. (25 March 2022). Improvement of the corrosion performance of AA2024 alloy by a duplex PEO/clay modified sol-gel nanocomposite coating. Surface and Coatings Technology, 434, 128168. doi:10.1016/j.surfcoat.2022.128168
Peer Reviewed verified by ORBi

Vitry, V. (19 March 2022). improvements of electroless nickel-boron by heat/thermochemical treatments, duplex coatings and removal of toxic stabilizer. Paper presented at VIT-AP University webinar, India.

Domgue kamwa, L. I., Vitry, V., Malingraux, M., & Lhenry-Robert, L. (2022). PRACTICAL APPROACH FOR CHARACTERIZING THE PROJECTION OF STAINLESS-STEEL DROPLETS: VACUUM DECARBURIZATION PLANT. Materials and Manufacturing Processes, 1-9. doi:10.1080/10426914.2022.2157431
Peer Reviewed verified by ORBi

Yunacti, M., Montagne, A., Staia, M., & Vitry, V. (2022). Tribocorrosion properties of electroless nickel-boron coatings from stabilizer-free bath. Paper presented at International Metallurgy & Materials Congress, Turkey.

Konate, F., Ancia, P., Soma, F., Bougouma, M., Buess-Herman, C., Yonli, A., & Vitry, V. (16 December 2021). Waste electrical and electronic equipments as urban mines in Burkina Faso: Characterization and release of metal particles. Waste Management, 139, 17-24.
Peer Reviewed verified by ORBi

Vitry, V. (2021). Traitements de surfaces : Aperçu général.

Vitry, V., Hastir, J., Mégret, A., Yazdani, S., Yunacti, M., & Bonin, L. (24 November 2021). Recent advances in electroless nickel‑boron coatings. Surface and Coatings Technology, 429.
Peer Reviewed verified by ORBi

Yunacti, M., Vitry, V., & Montagne, A. (18 November 2021). Progress in the stabilizer-free electroless nickel-boron deposits. Paper presented at Parrainage d'AltCtrlTrans project.

Konate, F., Yonli, H. A., Bougouma, M., Buess-Herman, C., & Vitry, V. (15 November 2021). Récupération du cuivre dans les cartes de circuits imprimés par procédé de cémentation. Paper presented at Symposium international sur la science et la technologie - SIST 4ème édition 2021, Ouagadougou, Burkina Faso.

Vitry, V., & Voizieux, O. (2021). Comment la sidérurgie belge compte prendre le train de l'acier vert. Trends tendance.

Konate, F., Yonli, H. A., & Vitry, V. (14 October 2021). Copper recovery from printed circuit boards by precipitation process in a deep eutectic solvent. Poster session presented at Journée Scientifique SRC 2021, Bruxelles, Belgium.

Yunacti, M., Vitry, V., Mégret, A., Montagne, A., & Staia, M. H. (2021). Characterization of Electroless Nickel-Boron Deposit from Optimized Stabilizer-Free Bath. Coatings.
Peer reviewed

Yunacti, M., Vitry, V., Mégret, A., & Montagne, A. (23 September 2021). Effect of heat treatment on a novel tin-stabilized electroless nickel-boron coating. Paper presented at Virtual Eurocorr, Virtual, Hungary.

Sopchenski Santos, L., Akbarzadeh, S., Touzin, M., Vitry, V., & Olivier, M.-G. (22 September 2021). Investigation of the long-term corrosion protection of sol-gel sealed PEO. Paper presented at EUROCORR2021, Virtuel (Budapest), Hungary.

Akbarzadeh, S., Sopchenski Santos, L., Vitry, V., & Olivier, M.-G. (22 September 2021). Improvement of the corrosion performance of AA2024 by a duplex PEO/clay modified sol-gel nanocomposite coating. Paper presented at EUROCORR2021, Virtuel (Budapest), Hungary.

Yunacti, M., & Vitry, V. (15 September 2021). ALTernative au Chrome TRi et hexavaLent pour le secteur du TRANSport et de la TRANSformation (Alt Ctrl Trans). Paper presented at Eurofinish, Brabanthallen, Unknown/unspecified.

Vitry, V., Bonin, L., & Delaunois, F. (14 September 2021). Towards Lead-free electroless nickel-boron plating. Paper presented at Internatinal Materials, Applications & Technologies IMAT2021, Saint Louis, Missouri, United States.

Delaunois, F., Mégret, A., & Vitry, V. (13 September 2021). Interest in advanced microscopy for the failure analysis of metallic components. Paper presented at Internatinal Materials, Applications & Technologies IMAT2021, Saint Louis, Missouri, United States.

Delaunois, F., Mégret, A., & Vitry, V. (23 June 2021). Failure analysis of metallic components due to improper materials and fabrication method. Paper presented at ICEAF VI : Conference of Engineering Against Failure, Virtual, Greece.

Yunacti, M., Mégret, A., Montagne, A., & Vitry, V. (11 June 2021). Corrosion resistance of electroless NiB coatings synthesized in a bath free of stabilizing agent. Paper presented at International Metallurgy and Materials congress, Istanbul/Virtual, Turkey.

Vitry, V. (2021). Overview of surface treatments - principles and use.

Vitry, V., Bonin, L., Yunacti, M., Mégret, A., & Delaunois, F. (01 June 2021). Electroless nickel boron coatings, can it replace hard chrome? Paper presented at Thermec'2021, Graz, Austria.

Delaunois, F., Stanciu, V. I., Erauw, J.-P., & Vitry, V. (01 June 2021). The effect of the proportion of doped binder on the microstructure and properties of WC-Co composites. Paper presented at Thermec'2021, Graz, Austria.

Khoshnaw, F., Delaunois, F., & Vitry, V. (07 April 2021). Recovery of the microstructural changes of different duplex stainless steel alloys. Multidiscipline Modeling in Materials and Structures, 17 (3), 668-680.
Peer Reviewed verified by ORBi

Mégret, A., Sibille, T., Vitry, V., & Delaunois, F. (30 March 2021). Study of the stability of electroless cobalt boron baths - E-WC project. Poster session presented at Mardi des Chercheurs 2021, Valenciennes, France.

Yunacti, M., Vitry, V., Mégret, A., & Montagne, A. (30 March 2021). Selection of the reducing agent concentration in a stabilizer free electroless nickel boron deposit bath. Poster session presented at Mardi des chercheurs, Valenciennes, France.

Vitry, V. (2021). Comment les redox ont façonné notre monde ? : Histoire de la métallurgie et des techniques.

Jolly, A., Cobley, A., Vitry, V., Wu, L., & Danilova, S. (21 March 2021). Functional Nickel coatings obtained by Electrodeposition and Electroless deposition. Poster session presented at Mardi des Chercheurs, Virtual Meeting, Unknown/unspecified.

Mégret, A., Vitry, V., & Delaunois, F. (17 March 2021). Study of the Processing of a Recycled WC-Co Powder: Can It Compete with Conventional WC-Co Powders? Journal of Sustainable Metallurgy, 7, 448-458.
Peer Reviewed verified by ORBi

Yunacti, M., Vitry, V., & Montagne Alex. (2021). Corrosion resistance of electroless nickel-boron coating in a bath exempt from stabilizer. Paper presented at Corrosion and Materials Degradation Web Conference.

Konate, F., Vitry, V., & Yonli, H. A. (08 December 2020). Elimination du cuivre dans les cartes de circuits imprimés. Paper presented at IIe Journées scientifiques de l'Université de Ouahigouya, Ouahigouya, Burkina Faso.

Bonin, L., Vitry, V., & Delaunois, F. (15 November 2020). Inorganic salts stabilizers effect in electroless nickel-boron plating: Stabilization mechanism and microstructure modification. Surface and Coatings Technology, 401.
Peer Reviewed verified by ORBi

Vitry, V. (12 October 2020). Collaboration in CLIL: Alloying content and language teachers' efforts in CLIL classes. Paper presented at ICHLE Symposium 2020 - TRANSDISCIPLINARY COLLABORATION IN ICLHE AND EMI, Mons, Belgium.

Sopchenski Santos, L., Portier, A., Vitry, V., & Olivier, M.-G. (10 September 2020). Barrier properties of Sol-Gel layer applied on PEO porous coatings for AA2024 corrosion protection. Poster session presented at Virtual Eurocorr2020, Bruxelles, Belgium.

Yunacti, M., Mégret, A., Montagne, A., & Vitry, V. (07 September 2020). Development and characterization of electroless NiB coatings in a bath free of stabilizing agent. Paper presented at Virtual Eurocorr2020, Bruxelles, Belgium.

Vitry, V. (20 August 2020). Electroless plating. Paper presented at Metallurgy Around The Globe Conference, Suez (online), Egypt.

Vitry, V. (2020). Sommes-nous toujours à l'âge du fer ?

Bonin, L., Vitry, V., Olivier, M.-G., & Bertolucci Coelho, L. (09 June 2020). Covid-19: effect of disinfection on corrosion of surfaces. Corrosion Engineering, Science and Technology, 55:8, 693-695.
Peer Reviewed verified by ORBi

Bonin, L., Vitry, V., & Delaunois, F. (30 April 2020). Replacement of Lead stabilizer in electroless Nickel-Boron baths: Synthesis and characterization of coatings from bismuth stabilized bath. Sustainable Materials and Technologies, 23.
Peer reviewed

Stanciu, V. I., Vitry, V., & Delaunois, F. (20 April 2020). Influence of the milling parameters on the sintering behaviour of WC-Co composites. Materials and Manufacturing Processes, 35 (7), 811-816. doi:10.1080/10426914.2020.1743850
Peer Reviewed verified by ORBi

Vitry, V. (2020). EDITO. A3TS Sciences et techniques.

Vitry, V., Bonin, L., Yunacti, M., Mégret, A., & Delaunois, F. (07 March 2020). Electroless nickel-boron coatings, can it replace hard chrome? Paper presented at SIXTH ASIAN CONFERENCE ON HEAT TREAT AND SURFACE ENGINEERING, Chennai, India.

Vitry, V., Stanciu, V. I., & Delaunois, F. (06 March 2020). Second advice: how failure analysis of metallic components can bring very different results when carried out by different labs, while it should not. Paper presented at SIXTH ASIAN CONFERENCE ON HEAT TREAT AND SURFACE ENGINEERING, Chennai, India.

Stanciu, V. I., Vitry, V., & Delaunois, F. (01 February 2020). Study of the milling parameters optimization in the direct carburization of WO3 by mechanical alloying. International Journal of Refractory Metals and Hard Materials, 87, 51-60.
Peer Reviewed verified by ORBi

Khoshnaw, F., Vitry, V., & Delaunois, F. (05 January 2020). Feasibility Study of Using Thermal Simulator to Observe Metallurgical Aspects of Welded Duplex Stainless Steel. International Journal of Advances in Science Engineering and Technology, 7 (4), 50-55.
Peer reviewed

Vitry, V., & Bonin, L. (2019). Polyalloyed Electroless Nickel Plating. In F. Delaunois, L. Bonin, V. Vitry, S. Begum, A. Cobley, J. Castano, E. Correa, S. K. Das, F. Echeverría, E. García-Lecina, J. Sudagar, A. Salicio Paz, R. Muraliraja, P. Sahoo, A. Selvakumar, T. R. Tamilarasan, S. Udayakumar, M. Urgen, A. A. Zuleta Gil, F. Delaunois (Ed.), L. Bonin (Ed.), & V. Vitry (Ed.), Electroless Nickel Plating: Fundamentals to applications (pp. 303-330). CRC Press.

Delaunois, F., Bonin, L., Vitry, V., Begum, S., Cobley, A., Castano, J., Correa, E., Das, S. K., Echeverría, F., García-Lecina, E., Sudagar, J., Salicio Paz, A., Muraliraja, R., Sahoo, P., Selvakumar, A., Tamilarasan, T. R., Udayakumar, S., Urgen, M., Zuleta Gil, A. A., & Vitry, V. (Ed.). (2019). Electroless nickel plating: Fundamentals to applications. CRC Press.

Bonin, L., & Vitry, V. (2019). Applications of Electroless Nickel and Practical Aspects. In F. Delaunois, L. Bonin, V. Vitry, S. Begum, A. Cobley, J. Castano, E. Correa, S. K. Das, F. Echeverría, E. García-Lecina, J. Sudagar, A. Salicio Paz, R. Muraliraja, P. Sahoo, A. Selvakumar, T. R. Tamilarasan, S. Udayakumar, M. Urgen, A. A. Zuleta Gil, F. Delaunois (Ed.), L. Bonin (Ed.), & V. Vitry (Ed.), Electroless Nickel Plating: Fundamentals to applications (pp. 411-424). CRC Press.

Vitry, V. (2019). Electroless Nickel-Boron-Part B: Posttreatments for Electroless Nickel-Boron. In F. Delaunois, L. Bonin, V. Vitry, S. Begum, A. Cobley, J. Castano, E. Correa, S. K. Das, F. Echeverría, E. García-Lecina, J. Sudagar, A. Salicio Paz, R. Muraliraja, P. Sahoo, A. Selvakumar, T. R. Tamilarasan, S. Udayakumar, M. Urgen, A. A. Zuleta Gil, F. Delaunois (Ed.), L. Bonin (Ed.), & V. Vitry (Ed.), Electroless Nickel Plating: Fundamentals to applications (pp. 223-262). CRC Press.

Konate, F., Ancia, P., Bougouma, M., Buess-Hermann, C., Vitry, V., & Yonli, H. A. (21 November 2019). Les déchets d'équipements électriques et électroniques (DEEE), Mines urbaines au Burkina Faso- Concentration des métaux. Paper presented at Colloque International en Sciences et Technologies (CIST 2019) 1ère édition, Koudougou , Burkina Faso.

Konate, F., Bougouma, M., Buess-Herman, C., Vitry, V., & Yonli, H. A. (14 November 2019). Déchets d'Equipements Électriques et Electroniques (D3E) au BURKINA FASO : Enjeux Environnemental et Economique. Poster session presented at Symposium international sur la Science et la Technologie (SIST-2019, 3e édition), Ouagadougou, Burkina Faso.

Mégret, A., Vitry, V., & Delaunois, F. (2019). Impact of the Amount of Recycled Cemented Carbide Powder on the Sintering Behavior of WC-Co Parts. Paper presented at Euro PM2019 Congress & Exhibition, Maastricht, Netherlands.

Delaunois, F., DENIL, E., Marchal, Y., & Vitry, V. (2019). Contribution to the study of portevin-le chatelier effect in aluminum alloy 2024. Paper presented at MS&T2019, Portland, United States - Oregon.

Vitry, V., & Delaunois, F. (30 September 2019). Doomed ! Parts that have made it through quality control and shouldn't have. Paper presented at MS&T2019, Portland, United States - Oregon.

Vitry, V., & Bonin, L. (30 September 2019). Effect of temperature on ultrasound-assisted electroless nickel-boron plating. Ultrasonics Sonochemistry, 56 (327-336).
Peer Reviewed verified by ORBi

Vitry, V., Bonin, L., & Delaunois, F. (13 September 2019). Corrosion resistance of electroless Ni-B-Sn alloys. Paper presented at Eurocorr 2019, Sevilla, Spain.

Vitry, V., Bonin, L., & Delaunois, F. (21 August 2019). BONICOAT.

Vitry, V., Mégret, A., & Bonin, L. (29 June 2019). Characterization and heat treatment of purely binary nickel-boron alloys deposited by electroless plating. Paper presented at SMT33, Naples, Italy.

Firrao, D., Dupont, P., Matteis, P., Pinasco, M. R., Ienco, G., Delaunois, F., & Vitry, V. (13 June 2019). Failure analysis of a large extrusion gearbox An International FAS Network Analysis. Paper presented at IGF25 - 25th International Conference - Fracture and Structural Integrity, Catania, Italy.

Stanciu, V. I., Vitry, V., Boilet, L., Erauw, J.-P., & Delaunois, F. (22 May 2019). Influence d'un liant dopé sur les propriétés mécaniques des alliages WC Co. Poster session presented at Poudres 2019 - Matériaux frittés et fabrication additive, Grenoble, France.

Stanciu, V. I., Erauw, J.-P., Vitry, V., & Delaunois, F. (09 April 2019). Amélioration des propriétés mécaniques des alliages WC-Co par l'utilisation d'un liant dopé et frittage SPS. Paper presented at Colloque Réseau National de la Métallurgie La Métallurgie, quel Avenir !, Nancy, France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (25 March 2019). Study of the milling parameters optimization in the direct carburization of WO3 by mechanical alloying. Poster session presented at 11th International Conference on the Science of Hard Materials (ICSHM11), Khao Lak, Thailand.

Konate, F., Chenoy, L., Ancia, P., Yonli, H. A., & Vitry, V. (05 March 2019). Determination of metals content in Printed Circuit Boards according to the particle size. Poster session presented at Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.

Mégret, A., Vitry, V., & Delaunois, F. (05 March 2019). Study of the sinterability of a recycled tungsten carbide powder. Poster session presented at Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (05 March 2019). Influence du pré-broyage de la poudre de WC sur la frittabilité des composites WC-Co. Poster session presented at Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.

Montagne, A., Vitry, V., Bonin, L., Mughal, M. Z., Sebastiani, M., Bemporad, E., Iost, A., & Staia, M. (30 January 2019). Contraintes résiduelles et comportement mécanique de revêtements nickel-bore. Matériaux et Techniques, 107 (2), 205.
Peer Reviewed verified by ORBi

Habraken, A., Mertens, A., Vitry, V., Colla, M.-S., & Le Bourhis, E. (30 January 2019). Indentation: techniques expérimentales et modélisation multiéchelle. Matériaux et Techniques, 107 (2), 204.
Peer Reviewed verified by ORBi

Bonin, L., Vitry, V., & Delaunois, F. (01 January 2019). The tin stabilization effect on the microstructure, corrosion and wear resistance of electroless NiB coatings. Surface and Coatings Technology, 357, 353-363.
Peer Reviewed verified by ORBi

Bonin, L., Delaunois, F., & Vitry, V. (2018). Revêtements chimiques de nickel-bore. In Techniques de l'Ingénieur - Paris (pp. 1-19). Techniques de l'Ingénieur.

Mégret, A., Thuault, A., Broeckmann, C., Sistla, S. K., Vitry, V., & Delaunois, F. (21 November 2018). Frittage des carbures de tungstène-cobalt recyclés. Paper presented at Matériaux 2018, Strasbourg, France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (20 November 2018). Nouvelle approche en vue d'introduire des inhibiteurs de croissance des grains dans les carbures cémentés. Paper presented at Matériaux 2018, Strasbourg, France.

Vitry, V., & Delaunois, F. (17 October 2018). Gamification of metallographic lab practice teaching by failure analysis. Paper presented at Materials Science and Technology 2018, Columbus, United States.

Vitry, V. (17 October 2018). Failure of galvanized steel water pipes: it's not always what you think. Paper presented at Materials Science and Technology 2018, Columbus, United States.

Dupont, P., Firrao, D., Vitry, V., & Delaunois, F. (16 October 2018). 'The Failure Analysis & Prevention of a Large and Critical Extrusion Gearbox Part 1/2 : The Case Study an Internationbal FAS Network Analysis'. Paper presented at Materials Science and Technology 2018, Columbus, United States.

Dupont, P., Firrao, D., Vitry, V., & Delaunois, F. (16 October 2018). 'The Failure Analysis & Prevention of a Large and Critical Extrusion Gearbox Part 2/2 : From Failure Analysis to Prevention, an International FAS Network Answer:'. Paper presented at Materials Science and Technology 2018, Columbus, United States.

Bonin, L., Castro, C., Vitry, V., Hantson, A.-L., & Delaunois, F. (16 October 2018). Optimization of electroless NiB deposition without stabilizer, based on surface roughness and plating rate. Journal of Alloys and Compounds, 767, 276-284.
Peer Reviewed verified by ORBi

Stanciu, V. I., Vitry, V., & Delaunois, F. (2018). Effect of doped binder on the microstructure of a WC-Co composite. Paper presented at Euro PM2018 Congress & Exhibition, Bilbao, Spain.

Mégret, A., Stanciu, V. I., Thuault, A., Broeckmann, C., Sistla, S. K., Vitry, V., & Delaunois, F. (2018). Unconventional Sintering of a Commercial Cemented WC-6Co Hardmetal. Paper presented at Euro PM2018 Congress & Exhibition, Bilbao, Spain.

Stanciu, V. I., Vitry, V., & Delaunois, F. (04 October 2018). Effect of doped binder on the microstructure of a WC-Co composite. Paper presented at Euro PM2018 Congress & Exhibition, Bilbao, Spain.

Vitry, V. (28 September 2018). Electro and electroless plating in defence applications. Paper presented at MET-2018 HTS-2018, Mumbai, India.

Stanciu, V. I., Vitry, V., & Delaunois, F. (18 September 2018). Impact of WC-Co powder preparation on the SPS sintering behavior. Paper presented at 2018 World Congress on Powder Metallurgy, Beijing, China.

Stanciu, V. I., Vitry, V., & Delaunois, F. (2018). Impact of WC-Co powder preparation on the SPS sintering behavior. Paper presented at 2018 World Congress on Powder Metallurgy, Beijing, China.

Montagne, A., Bonin, L., Mughal, M. Z., Sebastiani, M., Bemporad, E., Vitry, V., Iost, A., & Staia, M. (13 September 2018). Mechanical behavior of electroless nickel coatings. Poster session presented at Indentation 2018, Liège, Belgium.

Tosar, F., Delaunois, F., Vitry, V., & Groulard, F. (11 September 2018). Stainless steel corrosion in pharmaceutical industries: Rouging study in laboratory conditions. Paper presented at Eurocorr 2018, Krakow, Poland.

Vitry, V., Bonin, L., & Delaunois, F. (09 September 2018). Ultrasound assisted electroless deposition of nickel-boron coatings: Effect of ultrasonic frequency on the tribocorrosion behavior. Poster session presented at Eurocorr 2018, Krakow, Poland.

Konate, F., Soma, F., Bougouma, M., Buess-Herman, C., Vitry, V., & Yonli, H. A. (16 August 2018). Caractérisation de métaux précieux et de certains métaux d'intérêts dans les déchets d'équipements électriques et électroniques (DEEE). Paper presented at 19èmes Journées Scientifiques Annuelles de la SOACHIM, Lomé, Togo.

Vitry, V., Bonin, L., Bains, N., & Cobley, A. (09 July 2018). Ultrasound assisted electroless nickel-boron plating from alkaline borohydride bath. Paper presented at thermec 2018, Paris, France.

Bonin, L., Castro, C., Vitry, V., Hantson, A.-L., & Delaunois, F. (09 July 2018). Optimization of electroless NiB deposition without stabilizer, based on surface roughness and plating rate. Poster session presented at thermec 2018, Paris, France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (03 July 2018). Effet de l'utilisation d'un liant dopé sur la microstructure des composites WC-Co. Poster session presented at 9e Colloque Sciences et Technologie des Poudres, Compiègne, France.

Vitry, V., & Bonin, L. (29 June 2018). Enhancement of the mechanical properties of electroless nickel-boron. Paper presented at SMT32 - 32nd International Conference on Surface Modification Technologies, San Sebastian, Spain.

Bonin, L., Vitry, V., & Delaunois, F. (29 June 2018). Role of tin as a stabilizer in an electroless nickel-boron plating bath: Electroless NiB-Sn alloys properties. Paper presented at SMT32 - 32nd International Conference on Surface Modification Technologies, San Sebastian, Spain.

Montagne, A., Mughal, Z., Bonin, L., Sebastiani, M., Bemporad, E., Vitry, V., Iost, A., & Staia, M. (29 June 2018). Residual stresses in electroless nickel coatings. Poster session presented at SMT32 - 32nd International Conference on Surface Modification Technologies, San Sebastian, Spain.

Mégret, A., Stanciu, V. I., Thuault, A., Vitry, V., & Delaunois, F. (19 June 2018). Microwave sintering of cemented tungsten-cobalt carbides. Poster session presented at International Symposium on Inorganic and Environmental Materials, Gent, Belgium. doi:10.13140/RG.2.2.32962.89287

Delaunois, F., Roudet, F., & Vitry, V. (2018). Trends in heat treatment and surface engineering. Paper presented at 24th IFHTSE, Paris, France.

Vitry, V., Francq, E., & Bonin, L. (02 May 2018). Mechanical properties of heat-treated duplex electroless nickel coatings. Surface Engineering, 35 (2), 158-166.
Peer Reviewed verified by ORBi

Bonin, L., & Vitry, V. (16 April 2018). Electroless deposition of nickel-boron coatings using ultrasonic frequency to enable low temperature. Paper presented at 16th meeting of the european society of sonochemistry, Besançon, France.

Delaunois, F., & Vitry, V. (11 April 2018). The teaching of physical metallurgy based on the acquisition of soft-skills. Poster session presented at 10th International Materials Education Symposium, Cambridge, United Kingdom.

Mégret, A., Vitry, V., & Delaunois, F. (27 March 2018). Unconventional sintering of cemented WC-Co carbides. Poster session presented at Mardi des Chercheurs 2018, Valenciennes, France. doi:10.13140/RG.2.2.31795.94242

Konate, F., Ancia, P., Yonli, H. A., & Vitry, V. (27 March 2018). Procédé de libération des matériaux contenus dans les cartes électroniques. Poster session presented at Mardi des chercheurs, Valenciennes, France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (27 March 2018). Optimisation de l'homogénéisation des alliages WC-Co. Poster session presented at Mardi des Chercheurs (MdC2018), Valenciennes, France.

Bonin, L., Vitry, V., & Delaunois, F. (27 March 2018). Role of tin as a stabilizer in an electroless nickel-boron plating bath: Electroless NiB-Sn alloys properties. Poster session presented at Mardi des Chercheurs (MdC2018), Valenciennes, France.

Vitry, V., & Decker, M. (22 March 2018). Revêtements de nickel chimique anti usure. Paper presented at Journée Technique A3TS France-Nord/Belgique : Innovation en traitement de surface anti-usure, Université de Mons, Mons, Belgium.

Equeter, L., Tiberi, L., Boumazguida, K., Cauchie, D., De Lièvre, B., Deprince, E., Jandrain, T., Leclère, P., Lefevere, J., Marchal, C., Quenon, A., & Vitry, V. (07 March 2018). PhD Яevolution : la naissance d'une communauté de doctorants. Paper presented at Journée Doctorale Transfrontalière, Reims, France.

Bonin, L., Vitry, V., & Delaunois, F. (23 February 2018). Corrosion behaviour of electroless high boron-mid phosphorous nickel duplex coatings in the as-plated and heat-treated states in NaCl, H2SO4, NaOH and Na2SO4 media. Materials Chemistry and Physics, 208, 77-84.
Peer Reviewed verified by ORBi

Bonin, L., Bains, N., Vitry, V., & Cobley, A. (26 October 2017). Electroless deposition of nickel-boron coatings using low frequency ultrasonic agitation: Effect of ultrasonic frequency on the coatings properties and the deposition of electroless Ni-B composite. Paper presented at 3rd e-MINDS Workshop, Barcelona, Spain.

Bonin, L., Bains, N., Vitry, V., & Cobley, A. (25 October 2017). Electroless deposition of nickel-boron coatings using low frequency ultrasonic agitation: Effect of ultrasonic frequency on the coatings properties and the deposition of electroless Ni-B composite. Paper presented at 3rd e-MINDS Workshop, Barcelona, Spain.

Delaunois, F., & Vitry, V. (24 October 2017). Enseignement des alliages métalliques orienté compétences. Paper presented at Journées Annuelles SF2M 2017, Lyon, France.

Vitry, V., Stanciu, V. I., Dupont, P., & Delaunois, F. (12 October 2017). Failure of a helicopter rotor pinion. Paper presented at MS&T2017, Pittsburgh, United States.

Rachidi, R., El Kihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (04 October 2017). Wear Performance of Thermally Sprayed NiCrBSi and NiCrBSi - WC Coatings Under Two Different Wear Modes. Journal of Materials and Environmental Science, 8 (12), 4550 - 4559.
Peer Reviewed verified by ORBi

Stanciu, V. I., Vitry, V., & Delaunois, F. (2017). Optimization of the introduction of grain growth inhibitor in cemented carbides. Paper presented at Euro PM2017 Congress & Exhibition, Milano, Italy.

Stanciu, V. I., Vitry, V., & Delaunois, F. (02 October 2017). Optimization Of The Introduction Of Grain Growth Inhibitor In Cemented Carbides. Paper presented at Euro PM2017 Congress & Exhibition, Milano, Italy.

Stanciu, V. I., Vitry, V., & Delaunois, F. (19 September 2017). Influence of grinding speed and balls diameter on the microstructure of a WC-10% wt doped binder. Paper presented at RoPM&AM 2017, Cluj-Napoca, Romania.

Danilova, S., Graves, J., Bonin, L., Vitry, V., & Cobley, A. (12 September 2017). Electroless Ni-B plating in a gradient magnetic field. Paper presented at Electrochem 2017, Brimingham, Unknown/unspecified.

Vitry, V., Bonin, L., Bains, N., & Cobley, A. (07 September 2017). Corrosion behaviour of ultrasound assisted electroless nickel-boron coatings. Paper presented at EUROCORR2017, Prague, Unknown/unspecified.

Tosar, F., Vitry, V., Groulard, F., Mallet, L., & Delaunois, F. (05 September 2017). Study of stainless steel corrosion in pharmaceutical facilities: Initiation and development. Paper presented at EUROCORR2017, Prague, Unknown/unspecified.

Vitry, V., & Bonin, L. (20 July 2017). Formation and characterization of multilayers borohydride and hypophosphite reduced electroless nickel deposits. Electrochimica Acta, 243, 7-17.
Peer Reviewed verified by ORBi

Bonin, L., Vitry, V., & Delaunois, F. (06 July 2017). Properties of Electroless Nickel-Boron coatings stabilized by bismuth salts. Paper presented at SMT31 - International Conference on Surface Modification Technologies, Mons, Belgium.

Vitry, V., & Delaunois, F. (04 July 2017). Effect of SPS sintering on WC-Co powder densification. Poster session presented at 4ème Journée des Chercheurs de l'Institut Matériaux, UMONS, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (04 July 2017). Effect of SPS sintering on WC-Co powder densification. Poster session presented at 4ème Journée des Chercheurs de l'Institut Matériaux, UMONS, Belgium.

Bonin, L., Vitry, V., & Delaunois, F. (04 July 2017). Replacement of the lead stabilizer in electroless nickel-boron baths. Paper presented at The 4th researchers workshop of the materials research institute, Mons, Belgium.

Vitry, V., Bonin, L., & Delaunois, F. (28 June 2017). Elimination du plomb dans un bain de nickel-bore chimique. Paper presented at Congrès A3TS, Nice, France.

Delaunois, F., Bonin, L., & Vitry, V. (13 June 2017). Interest in composites formation to improve electroless nickel coatings properties. Paper presented at World Congress on Advanced Materials WCAM2017, Xi'an, China.

Avez, C., Coussement, G., Debailleux, L., Delaunois, F., Descamps, F., Ducobu, F., Dumont, E., Lupant, D., Rivière, E., & Vitry, V. (2017). Les techniques optiques de pointe au service de l'Ingénieur. Polytech-News, n°55.

Stanciu, V. I., Vitry, V., & Delaunois, F. (2017). Cobalt-inhibitor mixtures for cemented carbides. Paper presented at 19th Plansee Seminar 2017, Reutte, Austria.

Rachidi, R., Elkihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (11 May 2017). Non-destructive Testing of Adhesion Defects in Thick Composite Coating by Active Infrared Thermography Technique. Poster session presented at International Conference on Civil Engineering and Materials (ICCEM'2017), Al Hoceima, Morocco.

Rachidi, R., Elkihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (11 May 2017). Comparative Study of the Properties of WC Reinforced Ni-base Alloy Coatings Produced by Flame Spraying and by Laser Cladding. Paper presented at International Conference on Civil Engineering and Materials (ICCEM'2017), Al Hoceima, Morocco.

Vitry, V., Bonin, L., & Delaunois, F. (2017). Revêtements chimiques de nickel-bore, vers une formulation sans métaux lourds. Paper presented at Tricoat-Finishair 2017, Besançon, France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (04 May 2017). Influence de la vitesse de broyage et du diamètre de billes sur la microstructure d'un alliage WC-10%pds de cobalt dopé avec 1%pds de Cr3C2. Paper presented at PMF2017, Toulouse, France.

Bonin, L., Bains, N., Vitry, V., & Cobley, A. (01 May 2017). Ultrasound assisted electroless deposition of nickel-boron coatings: Effect of ultrasonic frequency on the coatings. Ultrasonics, 77, 61-68.
Peer Reviewed verified by ORBi

Vitry, V. (2017). Métaux, Incas et Carpes.

Vitry, V., Bonin, L., & Malet, L. (26 April 2017). Chemical and structural characterization of electroless duplex NiP/NiB coatings on steel. Surface Engineering, 34, 475-484.
Peer Reviewed verified by ORBi

Vitry, V. (2017). Turquie: la solidarité universitaire doit s'organiser. le soir+.

Rachidi, R., Elkihel, B., Delaunois, F., Vitry, V., & Deschuyteneer, D. (11 April 2017). Anti-wear performance of NiCrBSi/NiCrBSi-WC coatings produced by flame thermal spraying process. Poster session presented at 13ème congrès de mécanique (CMM2017), Meknès, Morocco.

Vitry, V. (2017). Un mardi par an, les chercheurs de l'UMONS font connaissance. L'Avenir.net, Mons-Centre Le fil d'actu.

Vitry, V. (2017). Rencontre annuelle pour les chercheurs de l'UMONS.

Bonin, L., Vitry, V., & Delaunois, F. (07 March 2017). Electroless Nickel-Boron bath stabilized by bismuth salts: Effect of bismuth salts on the coatings. Poster session presented at Mardi des Chercheurs (MdC2017), Mons, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (07 March 2017). Cobalt-inhibitors mixtures for cemented carbides. Poster session presented at Mardi des Chercheurs (MdC2017), Mons, Belgium.

Vitry, V., & Delaunois, F. (06 March 2017). Cobalt - inhibitors mixtures for cemented carbides. Poster session presented at Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.

Vitry, V., & Bonin, L. (15 February 2017). Increase of boron content in electroless nickel-boron coating by modification of plating conditions. Surface and Coatings Technology, 311, 164-171.
Peer Reviewed verified by ORBi

Bonin, L., Vitry, V., & Delaunois, F. (08 February 2017). Influence of the anionic part of the stabilizing agent on ENB coatings. Materials and Manufacturing Processes, 33 (2), 227-231. doi:10.1080/10426914.2017.1291949
Peer Reviewed verified by ORBi

Delaunois, F., Edwin, D., Marchal, Y., & Vitry, V. (01 January 2017). Accelerated aging and Portevin-Le Chatelier effect in AA 2024. Materials Science Forum, 879, 524-529.
Peer reviewed

Bonin, L., & Vitry, V. (15 December 2016). Mechanical and wear characterization of electroless nickel mono and bilayers and high boron-mid phosphorous electroless nickel duplex coatings. Surface and Coatings Technology, 307, 957-962.
Peer Reviewed verified by ORBi

Vitry, V., Bonin, L., & Malet, L. (06 December 2016). Morphological and microstructural observation of Duplex electroless coatings by TEM after sample selection by FIB. Paper presented at 2nd Caparica Christmas Conference on Sample Treatment, Caparica (Lisbonne), Portugal.

Rachidi, R., Elkihel, B., Delaunois, F., & Vitry, V. (01 December 2016). Microstructure and Microhardness Properties of Flame Thermal Sprayed NiCrBSi Alloy and NiCrBSi-WC Composite Coatings. Paper presented at 1st International Conference on Materials and Environmental Science (ICMES2016), Oujda, Morocco.

Vitry, V., Stanciu, V. I., & Delaunois, F. (26 October 2016). Some study on the milling parameters optimization in the direct carburization of WO3 by mechanical alloying. Paper presented at MS&T 2016, Salt Lake City, United States - Utah.

Delaunois, F., Stanciu, V. I., & Vitry, V. (26 October 2016). How different laboratories can obtain various results in the same case of failure ? Paper presented at MS&T 2016, Salt Lake City, United States - Utah.

Stanciu, V. I., Vitry, V., & Delaunois, F. (2016). Nanostructured Mix of Tungsten Carbide with Cobalt for Wear Parts. Paper presented at 2016 Powder Metallurgy World Congress, octobre 2016, Hamburg, Germany.

Bonin, L., & Vitry, V. (12 October 2016). THE INFLUENCE OF COATING THICKNESS AND SUBSTRATE HARDNESS ON SUPERFICIAL HARDNESS AND WEAR BEHAVIOR OF ELECTROLESS NICKEL-BORON COATINGS. Paper presented at Indentation 2016, Lille , France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (09 October 2016). Nanostructured mix of tungsten carbide with cobalt for wear parts. Poster session presented at 2016 Powder Metallurgy World Congress, octobre 2016, Hamburg, Germany.

Dawant, S., Daubie, E., Delaunois, F., Vitry, V., Colmant, S., & Stanciu, V. I. (2016). Etude de faisabilite de mesures d'epaisseur de nickel sur supports d'acier par fluorescence X.

Bonin, L., Francq, E., & Vitry, V. (15 September 2016). Corrosion behavior of electroless Ni-P/Ni-B Duplex Coatings. Paper presented at EUROCORR 2016, Montpellier, France.

Delaunois, F., Tshimombo, A., Stanciu, V. I., & Vitry, V. (10 September 2016). Contribution of acoustic emission to the monitoring of stress corrosion cracking of stainless steel: identification of the phases of the corrosion process and use of an accelerated test. Corrosion Science, 110, 273-283.
Peer Reviewed verified by ORBi

Vitry, V., & Bonin, L. (18 August 2016). Formation and characterization of multilayers borohydride and hypophosphite reduced electroless nickel deposits. Paper presented at 11th International Symposium on Electrochemical Micro & Nanosystem Technologies, Bruxelles, Belgium.

Bonin, L., Bains, N., Vitry, V., & Cobley, A. (18 August 2016). Properties of electroless Ni-B-WC composite coatings. Paper presented at 11th International Symposium on Electrochemical Micro & Nanosystem Technologies, Bruxelles, Belgium.

Bonin, L., Vitry, V., & Cobley, A. (05 July 2016). ultrasound assisted electroless deposition of nickel-boron coatings: effect of ultrasonic frequency on the coating. Poster session presented at 3ème Journée de l'Institut Matériaux, Mons, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (05 July 2016). Influence of the speed and size of balls on the temperature during tungsten carbide production (WC) by mechanical alloying. Poster session presented at 3ème Journée de l'Institut Matériaux, Mons, Belgium.

Bonin, L., Vitry, V., & Delaunois, F. (2016). Influence of the anionic part of the surfactant on electroless nickel-boron coatings. Paper presented at XXX International Conference on Surface Modification Technologies (SMT30), Milan, Italy.

Vitry, V., Bonin, L., & Delaunois, F. (31 May 2016). Can heat treatment improve duplex electroless nickel coatings? Paper presented at THERMEC'2016, Gratz, Austria.

Stanciu, V. I., Vitry, V., & Delaunois, F. (18 May 2016). Influence de la température sur la production de carbure de tungstène (WC) par mechanical alloying. Poster session presented at Matinée des Chercheurs 2016, Université de Valencienne, France.

Bonin, L., & Vitry, V. (18 May 2016). The use of the pin-on-disk tribology test method to study wear properties of electrolessNi-P/Ni-B duplex coatings. Poster session presented at 9ème édition de la Matinée des Chercheurs 2016 (MdC2016); Mons; Belgique; 2015, Valenciennes, France.

Vitry, V. (14 May 2016). Promise of Duplex Coatings and Challenges in Industrial Applications. Paper presented at 2 nd Heat Treatment & Surface Engineering Conference and Expo 2016, Chennai, India.

Vitry, V., & Delaunois, F. (15 December 2015). Initiation of borohydride-reduced nickel boron plating on steels with various carbon and nickel content. Applied Surface Science, 359, 692-703.
Peer Reviewed verified by ORBi

Delaunois, F., & Vitry, V. (2015). Electroless Nickel-Boron Coatings Process, Composition, Microstructure and Properties. In Encyclopedia of Iron, Steel, and Their Alloys. Taylor & Francis Group, London.

Stanciu, V. I., Vitry, V., & Delaunois, F. (29 October 2015). Production of tungsten carbide  nanopowders by mechanical alloying. Paper presented at 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (29 October 2015). Tungsten carbide powder obtained by direct carburization of tungsten trioxide using mechanical alloying method. Journal of Alloys and Compounds, 659, 302-308.
Peer Reviewed verified by ORBi

Stanciu, V. I., Vitry, V., & Delaunois, F. (28 October 2015). Direct Carburization Of Tungsten Trioxide By Mechanical Alloying. Advanced Materials Research, 1128, 51-57. doi:10.4028/www.scientific.net/AMR.1128.51
Peer reviewed

Bonin, L., Vitry, V., & Delaunois, F. (2015). Leaching of hexavalent chromium from stainless steelmaking slags and the pH influence on the chromium mobility. Paper presented at SIPS2015 - Sustainable Industrial Processing Summit, Antalya, Turkey.

Vitry, V., Tosar, F., Mallet, L., Bonin, L., & Delaunois, F. (08 October 2015). Characterization by XRD and TEM of various electroless nickel-boron deposits. Paper presented at Materials Science & Technology 2015, Columbus, United States.

Stanciu, V. I., Vitry, V., & Delaunois, F. (2015). Tungsten carbide nano powder obtained by mechanical alloying in high energy mill. Paper presented at SIPS2015 - Sustainable Industrial Processing Summit, Antalya, Turkey.

Delaunois, F., Stanciu, V. I., & Vitry, V. (08 October 2015). Analysis and technical diagnostics of various cases of failure of ferrous alloys components after use. Paper presented at Materials Science & Technology 2015, Columbus, United States.

Vitry, V. (07 October 2015). Un projet 'historique' : la réduction des oxydes de fer au bas fourneau. Polytech.News, 52.

Bonin, L., Vitry, V., & Delaunois, F. (11 September 2015). Damage of Ni-P/Ni-B duplex coatings, after diamond scratch tests. Poster session presented at BSM Annual Meeting 2015: When Materials Meet Biology, Mons, Unknown/unspecified.

Delaunois, F., Tosar, F., Vitry, V., & Hantson, A.-L. (2015). Incidence of microbial corrosion of metallic tubes in sanitary facilities. Paper presented at EUROCORR 2015, Graz, Austria.

Bonin, L., Vitry, V., & Delaunois, F. (07 September 2015). Electroless Ni-P/Ni-B Duplex Coatings: Microstructural and Mechanical Properties. Poster session presented at Mapping the Future of Materials Science, Paris, France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (2015). Broyage en milieu liquide d'un liant pour les carbures cémentés à base de cobalt dopé avec Cr3C2. Récents Progrès en Génie des Procédés, (107/2015).

Vitry, V., & Delaunois, F. (2015). Electroless nickel-phosphorous Vs electroless nickel-boron: comparison of hardness, abrasion resistance, scratch test response and corrosion behavior. In Comprehensive Guide for Nanocoatings Technology, Volume 1: Deposition and Mechanism (pp. 145-173). Nova Science Pub Inc.

Vitry, V., & Delaunois, F. (2015). Nanostructured Electroless nickel-boron deposition: initiation mechanism and formation, effect of bath chemistry modification. In Comprehensive Guide for Nanocoatings Technology: Volume 3: Properties and Development (pp. 283-308). Nova Science Pub Inc.

Vitry, V., Bonin, L., & Delaunois, F. (2015). Microstructural, mechanical and tribological properties of electroless duplex NiP/NiB coatings on steel. Paper presented at SMT29, Copenhagen, Denmark.

Vitry, V., Tosar, F., Bonin, L., & Delaunois, F. (09 June 2015). Microstructural and mechanical characterization of mono and bi-layer electroless nickel coatings. Paper presented at SurFin 2015, Rosemont, United States.

Bonin, L., Vitry, V., & Delaunois, F. (08 May 2015). Comparison of different batch leaching tests on steelmaking slags. Poster session presented at NANOWAL (The Wallonia Network for Nanotechnologies) and MAIN (The MAterials, Interfaces and Nanostructures Doctoral School) on Nanomaterials and Energy, Mons, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (08 April 2015). Broyage en milieu liquide d'un liant pour les carbures cémentés à base de cobalt dopée avec Cr3C2. Poster session presented at colloque STPMF 2015, Nancy, France.

Vitry, V. (08 April 2015). Teaching old tricks to new dogs : using the bloomery as a teaching tool for extractive metallurgy. Paper presented at 7th Materials Education Symposium, Cambridge, Unknown/unspecified.

Vitry, V. (19 March 2015). Traitements et modifications des surfaces : Principes généraux. Paper presented at Journée Technique A3TS France Nord-Belgique: protection et décoration des métaux, Fourmies, France.

Bonin, L., Vitry, V., & Delaunois, F. (18 March 2015). Comparison of different batch leaching tests on steelmaking slags. Paper presented at Recycling 2015, Metz, France.

Vitry, V. (10 March 2015). A modern version of the bloomery process. Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.

Bonin, L., Vitry, V., & Delaunois, F. (10 March 2015). Comparison of different batch leaching tests on steelmaking slags. Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (10 March 2015). Some aspects of the production of nano tungsten carbide powder (WC) by mechanical alloying. Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.

Stanciu, V. I., Vitry, V., & Delaunois, F. (06 March 2015). Direct Carburization Of Tungsten Trioxide By Mechanical Alloying. Paper presented at BRAMAT, Brasov, Romania.

Vitry, V., & Delaunois, F. (2014). Nanostructured electroless nickel-boron coatings for wear resistance. In Anti-Abrasive Nanocoatings: Current and future applications (pp. 157-200). Woodhead Publishing.

Delaunois, F., Stanciu, V. I., Mario, S., & Vitry, V. (28 November 2014). Caractérisation d'une fonte à haut chrome alliée au niobium pour des cylindres de laminoir. Paper presented at Matériaux 2014, Montpellier, France.

Rachidi, R., El Kihel, B., Delaunois, F., & Vitry, V. (26 November 2014). Etude microstructurale des revêtements WC-Co déposés par cladding laser sur l'acier avec différentes teneurs en Co. Paper presented at Matériaux 2014, Montpellier, France.

Stanciu, V. I., Vitry, V., & Delaunois, F. (25 November 2014). Broyage par voie humide d'une poudre de cobalt dopé avec Cr3C2 en tant que liant dans les carbures cémentés. Poster session presented at Matériaux 2014, Montpellier, France.

Vitry, V., Tosar, F., & Delaunois, F. (24 November 2014). Etude de l'initiation et de la formation de dépôts chimiques de nickel-bore sur divers substrats ferreux. Paper presented at Matériaux 2014, Montpellier, France.

Delaunois, F., Tshimombo, A., Stanciu, V. I., & Vitry, V. (14 October 2014). Contribution of acoustic emission to the monitoring of stress corrosion cracking of stainless steel: identification of the phases of the corrosion process and use of an accelerated test. Paper presented at Materials Science & Technology 2014, Pittsburgh, United States.

Vitry, V., Tosar, F., & Delaunois, F. (08 September 2014). Study of corrosion resistance of electroless duplex NiP/NiB coatings in different media by potentiodynamic polarisation and SEM observation. Paper presented at EUROCORR 2014, Pise, Italy.

Vitry, V., Steve, N., Breyer, J.-P., Sinnaeve, M., & Delaunois, F. (2014). Study of the microstructure of two centrifugal cast high speed steels destined for hot strip mills applications. Paper presented at Abrasion 2014, Stockholm, Sweden.

Delaunois, F., Tosar, F., & Vitry, V. (01 June 2014). Corrosion Behaviour and Biocorrosion of Galvanized Steel Water Distribution Systems. Bioelectrochemistry, 97 (c), 110-119.
Peer Reviewed verified by ORBi

Vitry, V. (30 May 2014). Valorisation énergétique des résidus de l'industrie agro-alimentaire. Paper presented at 2ème journée technique de la PFT2M de Oujda, Oujda, Morocco.

Stanciu, V. I., Vitry, V., & Delaunois, F. (2014). A ready to use Cr3C2 doped cobalt powder as binder in cemented carbides. Paper presented at Metal2014, Brno, Unknown/unspecified.

Vitry, V., & Delaunois, F. (2014). Corrosion protection of steel and aluminium alloys by electroless nickel-boron and duplex electroless NiP-NiB coatings. Paper presented at IMTCE 2014 - International Symposium on Corrosion & Materials Degradation 2014, Kuala Lumpur, Malaysia.

Vitry, V., Tosar, F., & Delaunois, F. (03 May 2014). Mechanical properties, wear and scratch test resistance of various electroless nickel deposits. Paper presented at ICMCTF, San Diego, United States - California.

Vitry, V., Sens, A., & Delaunois, F. (25 April 2014). Comparison of various electroless nickel coatings on steel: structure, hardness and abrasion resistance. Materials Science Forum, 783-786, 1405-1413.

Rachidi, R., El Kihel, B., & Vitry, V. (24 April 2014). Modélisation numérique de la flamme issue d'une torche de projection thermique - Etude de l'influence des paramètres opératoires. Paper presented at 5th International Symposium on Aircraft Materials, Marrakech, Morocco.

Vitry, V. (20 March 2014). Les traitements de surface en voie liquide, historique et principes, le choix du nickel. Paper presented at Journée Technique A3TS France Nord-Belgique: LES TRAITEMENTS SUPERFICIELS ANTICORROSION ET ANTI-USURE PAR VOIE HUMIDE, Maubeuge, France.

Tshimombo, A., Idrissi, H., Ahuka, A., Vitry, V., & Delaunois, F. (01 March 2014). 'Etude de l'influence de la contrainte appliquée à l'éprouvette en corrosion sous tension suivie par émission acoustique'. 'Congo Sciences Journal en Ligne de l'ACASTI et du CEDESURK ', 2 (1), 10-16.

Vitry, V., & Delaunois, F. (07 February 2014). Revêtements de nickel chimique: propriétés mécaniques et tribologiques des dépôts au bore et au phosphore. Paper presented at Journée Technique île de France et assemblée générale A3TS, Paris, France.

Vitry, V., Denollin, G., & Delaunois, F. (2013). Observation of the structure and defects of ASTM A387 grade 22 steel solidified by continuous casting. Paper presented at 19th IAS steel conference, Rosario, Argentina.

Delaunois, F., Sens, A., & Vitry, V. (01 September 2013). Do Nickel and Nickel Alloys Actually Passivate in Various Media? Paper presented at EUROCORR2013, Estoril, Portugal.

Delaunois, F., Sens, A., & Vitry, V. (03 June 2013). Evolution de la chimie d'un bain de nickel-bore en cours de dépôt. Paper presented at A3TS Marseille 2013 - TRAITEMENT DES MATERIAUX ET DES SURFACES - Perspectives 2020, Marseille, France.

Vitry, V., Aubert, A., & Delaunois, F. (04 April 2013). Implementing an evidence-based reform of a Material engineering curriculum. Poster session presented at 5th International Symposium on Materials Education, Cambridge, United Kingdom.

Vitry, V., Sens, A., & Delaunois, F. (01 April 2013). Experimental study on the formation of electroless nickel-boron coatings from borohydride-reduced bath on mild steel. Products Finishing, 77 (7), 14-15.
Peer reviewed

Vitry, V., Sens, A., & Delaunois, F. (12 March 2013). Abrasion resistance of steel coated with various chemical nickel deposit. Poster session presented at 7ième Matinée des Chercheurs, Mons, Belgium.

Vitry, V., Sens, A., Kanta, A. F., & Delaunois, F. (01 November 2012). Experimental study on the formation and growth of electroless nickel-boron coatings from borohydride-reduced bath on mild steel. Applied Surface Science, 263, 640-647.
Peer Reviewed verified by ORBi

Delaunois, F., Sens, A., & Vitry, V. (09 September 2012). Corrosion behaviour and Biocorrosion of Galvanized Steel Water Distribution Systems. Paper presented at EUROCORR 2012, Istanbul, Turkey.

Vitry, V., Sens, A., & Delaunois, F. (27 July 2012). Abrasion resistance of steel coated with various chemical nickel deposit. Poster session presented at Junior Euromat, Lausanne, Switzerland.

Vitry, V., Kanta, A. F., & Delaunois, F. (20 June 2012). Evolution of reactive concentration during borohydride-reduced electroless nickel-boron plating and design of a replenishment procedure. Industrial and Engineering Chemistry Research, 51 (27), 9227-9234.
Peer Reviewed verified by ORBi

Vitry, V., Sens, A., & Delaunois, F. (2012). Experimental study on the formation of electroless nickel-boron coatings from borohydride-reduced bath on mild steel. Paper presented at SurFin 2012, Las Vegas, United States - Nevada.

Vitry, V., Sens, A., & Delaunois, F. (08 June 2012). Surface reinforcement of steel substrate by electroless nickel-boron. Paper presented at 1st World Conference on Advanced Materials, Beijing, China.

Vitry, V., Sens, A., & Delaunois, F. (2012). Initial deposition of electroless nickel from borohydride-reduced bath on various ferrous alloys. Paper presented at Metal 2012, Brno, Unknown/unspecified.

Vitry, V., Sens, A., & Delaunois, F. (11 May 2012). Abrasive wear resistance of steel coated with various electroless nickel coatings. Poster session presented at Journées Internationales Francophones de Tribologie, Aix-en-Provence, France.

Delaunois, F., Aubert, A., & Vitry, V. (14 April 2012). Is there a future for teaching metallurgy in Belgium? Poster session presented at Materials Education Symposium, Cambridge, United Kingdom.

Delaunois, F., Stanciu, V. I., Denollin, G., & Vitry, V. (01 March 2012). Structure and defects of ASTM A387 grade 22 steel solidified by continuous casting. Poster session presented at La Matinée des chercheurs 2012, Bruxelles , Belgium.

Vitry, V., Kanta, A. F., & Delaunois, F. (28 February 2012). Application of nitriding to electroless nickel-boron coatings: Chemical and structural effects; Mechanical characterization; Corrosion resistance. Materials and Design, 39, 269-278.
Peer Reviewed verified by ORBi

Vitry, V., Kanta, A. F., Dille, J., & Delaunois, F. (11 February 2012). Structural state of electroless nickel-boron deposits (5 wt. % B): re-characterization by XRD and FIB-TEM. Surface and Coatings Technology, 206, 3444-3449.
Peer Reviewed verified by ORBi

Vitry, V., Sens, A., Kanta, A. F., & Delaunois, F. (11 February 2012). Wear and corrosion resistance of heat treated and as-plated Duplex NiP/NiB coatings on 2024 aluminium alloys. Surface and Coatings Technology, 206, 3421-3427.
Peer Reviewed verified by ORBi

Vitry, V., Nardone, S., Breyer, J.-P., Sinnaeve, M., & Delaunois, F. (01 February 2012). Microstructure of two centrifugal cast high speed steels for hot strip mills applications. Materials and Design, 34, 372-378.
Peer Reviewed verified by ORBi

Vitry, V., Kanta, A. F., Sens, A., & Delaunois, F. (01 January 2012). Tribological characterization of electroless nickel-boron coatings. Advanced Materials Research, 409, 808-813.

Vitry, V., Kanta, A. F., & Delaunois, F. (25 December 2011). Mechanical and wear characterization of electroless nickel-boron coatings. Surface and Coatings Technology, 206, 1879-1885.
Peer Reviewed verified by ORBi

Vitry, V., Kanta, A. F., & Delaunois, F. (13 September 2011). Synthesis of nanocrystalline Ni-B alloy by electroless deposition and effect of heat treatments on their structural state. Paper presented at Euromat 2011, Montpellier, France.

Sens, A., Kanta, A. F., Vitry, V., & Delaunois, F. (13 September 2011). Corrosion resistance of electroless Ni-B coatings in sodium chloride, and alkaline and acid media. Poster session presented at Euromat 2011, Montpellier, France.

Delaunois, F., Sinnaeve, M., Breyer, J.-P., & Vitry, V. (2011). Effects of Ti, V and Nb carbide on the properties of ICDP cast iron finishing rolls. Paper presented at Abrasion 2011, Liège, Belgium.

Vitry, V., Dagrain, F., Delaunois, F., & VanParys, L. (07 July 2011). Characterization of the consolidation effect of ethyl silicate on Maastricht limestone. Paper presented at ConserStone 2011 - Conservation of Stone Heritage, Orléans, France.

Vitry, V., Kanta, A. F., & Delaunois, F. (2011). Mechanical and wear characterization of electroless nickel-boron coatings. Paper presented at ICMCTF 2011, San Diego, United States - California.

Vitry, V., Kanta, A. F., & Delaunois, F. (15 December 2010). Initiation and formation of electroless nickel-boron coatings on mild steel: effect of substrate roughness. Materials Science and Engineering: B, Solid-State Materials for Advanced Technology, 175, 266-273.
Peer Reviewed verified by ORBi

Vitry, V., Kanta, A. F., & Delaunois, F. (01 October 2010). Influence of local composition on morphology of electroless nickel-boron deposits on mild steel. Praktische Metallographie, 42, 315-320.

Kanta, A. F., Poelman, M., Vitry, V., & Delaunois, F. (27 August 2010). Nickel-boron electrochemical properties investigations. Journal of Alloys and Compounds, 505 (1) (27), 151-156.
Peer Reviewed verified by ORBi

Kanta, A. F., Vitry, V., & Delaunois, F. (2010). Effect of wear and heat treatments on the corrosion resistance of electroless nickel-boron coated mild steel. Paper presented at Conference on Corrosion and Materials Protection, Prague, Czechia.

Vitry, V. (2010). Electroless Nickel-Boron deposits: Synthesis, formation and characterization; Effect of heat treatments; Analytical modeling of the structural state. Unpublished doctoral thesis, Université de Mons.
Jury: .

Kanta, A. F., Vitry, V., & Delaunois, F. (01 January 2010). Wear and Corrosion Resistance of Electroless Nickel-Boron Coated Mild Steel. Materials Science Forum, 638-642, 846-851.
Peer reviewed

Kanta, A. F., Vitry, V., & Delaunois, F. (31 December 2009). Effect of thermochemical and heat treatments on electroless nickel-boron. Materials Letters, 63 (30), 2662-2665.
Peer Reviewed verified by ORBi

Vitry, V., & Delaunois, F. (2009). How heat treatment can give better properties to electroless nickel-boron coatings. Metallurgia Italiana, (Avril 2009), 49-54.

Vitry, V., Kanta, A. F., & Delaunois, F. (17 March 2009). Initiation and formation of electroless nickel-boron deposits on steel. Poster session presented at Matinée des chercheurs 2009, Mons, Belgium.

Vitry, V., & Delaunois, F. (01 September 2008). How heat treatment can give better properties to electroless nickel-boron coatings. Paper presented at Journée des doctorants de l'Ecole Doctorale, Liège, Belgium.

Vitry, V., Delaunois, F., & Dumortier, C. (2008). How heat treatment can give better properties to electroless nickel-boron coatings. Paper presented at European Conference on Heat Treatment 2008, Vérone, Italy.

Vitry, V., & Delaunois, F. (2008). A study of mechanical and tribological properties of electroless nickel-boron deposits after heat and thermochemical treatments. Paper presented at Friction, wear and wear protection 2008, Aix-la-Chapelle, Germany.

Vitry, V., Delaunois, F., & Dumortier, C. (01 April 2008). Mechanical properties and scratch test resistance or nickel-boron coated aluminium alloy after heat treatments. Surface and Coatings Technology, 202 (14), 3316-3324.
Peer Reviewed verified by ORBi

Vitry, V., & Delaunois, F. (26 February 2008). Electroless Nickel-Boron(-Pb) coatings : study of deposition, properties and heat treatments. Paper presented at Matinée des Chercheurs 2008, Bruxelles, Belgium.

Vitry, V. (26 January 2008). Electroless Nickel-Boron(-Pb) coatings : study of deposition, properties and heat treatments. Paper presented at Journée Matériaux, FPMs, Mons, Belgium.

Vitry, V., & Delaunois, F. (01 April 2007). A study of mechanical and tribological properties of nickel-boron coated aluminium alloys. ATB Métallurgie, 45 (1-4), 353-358.
Peer reviewed

Vitry, V., Delaunois, F., & Dumortier, C. (01 April 2007). Improvement of hardness and mechanical properties of electroless nickel-boron deposits by thermochemical treatment. Journal of Applied Surface Finishing, 2 (2), 106-111.
Peer reviewed

Vitry, V., & Delaunois, F. (2006). Improvement of hardness and mechanical properties of electroless nickel-boron deposits by thermochemical treatment. Paper presented at Sur/fin 2006, Milwaukee, United States.

Vitry, V., & Delaunois, F. (02 May 2006). Study of hardness and mechanical properties of electroless nickel-boron coatings on various substrates after thermochemical treatment. Algerian Journal of Advanced Materials, 3, 111-115.

Vitry, V., & Delaunois, F. (2006). Nitridation treatments to improve the hardness and mechanical properties of electroless nickel-boron deposits. Paper presented at IFHTSE 15 and SMT20 (International Federation of Heat Treating and Surface Finishing 15 and Surface Modification Treatments 20 Congress), Vienne, Austria.

Vitry, V., Renaux, F., Gouttebaron, R., Dauchot, J.-P., & Hecq, M. (2006). Preparation and characterisation of gasochromic thin films. Thin Solid Films, (502), 265-269.
Peer Reviewed verified by ORBi

Vitry, V. (2003). Préparation et caractérisation de matériaux pour l'effet gasochrome. Unpublished master thesis, Université de Mons.
Jury: Hecq, M. (Promotor).

Contact ORBi