[1] Eichinger, E., Osborne, J., Van Cleave, T., Hexavalent chromium elimination: an aerospace industry progress report. Met. Finish. 95 (1997), 36–41.
[2] Regulation (EC) No 1907/2006, Official Journal of the European Union L 396 of 30 December 2006. (DOI), 2006.
[3] Zheludkevich, M.L., Poznyak, S.K., Rodrigues, L.M., Raps, D., Hack, T., Dick, L.F., Nunes, T., Ferreira, M.G.S., Active protection coatings with layered double hydroxide nanocontainers of corrosion inhibitor. Corros. Sci. 52 (2010), 602–611.
[4] González-García, Y., Mol, J.M.C., Muselle, T., De Graeve, I., Van Assche, G., Scheltjens, G., Van Mele, B., Terryn, H., SECM study of defect repair in self-healing polymer coatings on metals. Electrochem. Commun. 13 (2011), 169–173.
[5] Naderi, R., Fedel, M., Deflorian, F., Poelman, M., Olivier, M., Synergistic effect of clay nanoparticles and cerium component on the corrosion behavior of eco-friendly silane sol–gel layer applied on pure aluminum. Surf. Coat. Technol. 224 (2013), 93–100.
[6] Harvey, T.G., Hardin, S.G., Hughes, A.E., Muster, T.H., White, P.A., Markley, T.A., Corrigan, P.A., Mardel, J., Garcia, S.J., Mol, J.M.C., Glenn, A.M., The effect of inhibitor structure on the corrosion of AA2024 and AA7075. Corros. Sci. 53 (2011), 2184–2190.
[7] Birbilis, N., Buchheit, R.G., Inhibition of AA2024-T3 on a phase-by-phase basis using an environmentally benign inhibitor, cerium dibutyl phosphate. Electrochem. Solid-State Lett. 8 (2005), C180–C183.
[8] White, P.A., Hughes, A.E., Furman, S.A., High-throughput channel arrays for inhibitor testing: proof of concept for AA2024-T3. Corros. Sci. 51 (2009), 2279–2290.
[9] Muster, T.H., Hughes, A.E., Furman, S.A., A rapid screening multi-electrode method for the evaluation of corrosion inhibitors. Electrochim. Acta 54 (2009), 3402–3411.
[10] Markley, T.A., Forsyth, M., Hughes, A.E., Corrosion protection of AA2024-T3 using rare earth diphenyl phosphates. Electrochim. Acta 52 (2007), 4024–4031.
[11] Garcia-Heras, M., Jimenez-Morales, A., Casal, B., Galvan, J.C., Radzki, S., Villegas, M.A., Preparation and electrochemical study of cerium–silica sol–gel thin films. J. Alloys Compd. 380 (2004), 219–224.
[12] Trabelsi, W., Triki, E., Dhouibi, L., Ferreira, M.G.S., Zheludkevich, M.L., Montemor, M.F., The use of pre-treatments based on doped silane solutions for improved corrosion resistance of galvanised steel substrates. Surf. Coat. Technol. 200 (2006), 4240–4250.
[16] Trabelsi, W., Cecilio, P., Ferreira, M.G.S., Montemor, M.F., Electrochemical assessment of the self-healing properties of Ce-doped silane solutions for the pre-treatment of galvanised steel substrates. Prog. Org. Coat. 54 (2005), 276–284.
[17] Mardel, J., Garcia, S.J., Corrigan, P.A., The characterisation and performance of Ce (dbp) 3-inhibited epoxy coatings. Prog. Org. Coat. 70 (2011), 91–101.
[18] Borisova, D., Möhwald, H., Shchukin, D.G., Mesoporous silica nanoparticles for active corrosion protection. ACS Nano 5 (2011), 1939–1946.
[24] Fix, D., Andreeva, D.V., Lvov, Y.M., Shchukin, D.G., Möhwald, H., Application of inhibitor-loaded halloysite nanotubes in active anti-corrosive coatings. Adv. Funct. Mater. 19 (2009), 1720–1727.
[25] Shchukin, D.G., Lamaka, S.V., Yasakau, K.A., Zheludkevich, M.L., Ferreira, M.G.S., Mohwald, H., Active anticorrosion coatings with halloysite nanocontainers. J. Phys. Chem. C 112 (2008), 958–964.
[26] Abdullayev, E., Price, R., Shchukin, D., Lvov, Y., Halloysite tubes as nanocontainers for anticorrosion coating with benzotriazole. ACS Appl. Mater. Interfaces 1 (2009), 1437–1443.
[27] Dias, S.A.S., Lamaka, S.V., Nogueira, C.A., Diamantino, T.C., Ferreira, M.G.S., Sol–gel coatings modified with zeolite fillers for active corrosion protection of AA2024. Corros. Sci. 62 (2012), 153–162.
[28] Motte, C., Poelman, M., Roobroeck, A., Improvement of corrosion protection offered to galvanized steel by incorporation of lanthanide modified nanoclays in silane layer. Prog. Org. Coat. 74 (2012), 326–333.
[29] Montemor, M.F., Snihirova, D.V., Taryba, M.G., Self-healing ability in protective coatings modified with combinations of layered double hydroxides and cerium molibdate nanocontainers filled with corrosion inhibitors. Electrochim. Acta 60 (2012), 31–40.
[30] Tedim, J., Zheludkevich, M.L., Nanostructured LDH-container layer with active protection functionality. J. Mater. Chem. 21 (2011), 15464–15470.
[31] Ferreira, M.G.S., Duarte, R.G., Montemor, M.F., Simoes, A.M.P., Silanes and rare earth salts as chromate replacers for pre-treatments on galvanised steel. Electrochim. Acta 49 (2004), 2927–2935.
[32] Rosero-Navarro, N.C., Paussa, L., Andreatta, F., Castro, Y., Duran, A., Aparicio, M., Fedrizzi, L., Optimization of hybrid sol–gel coatings by combination of layers with complementary properties for corrosion protection of AA2024. Prog. Org. Coat. 69 (2010), 167–174.
[33] Lamaka, S., Zheludkevich, M., Yasakau, K., Serra, R., Poznyak, S., Ferreira, M., Nanoporous titania interlayer as reservoir of corrosion inhibitors for coatings with self-healing ability. Prog. Org. Coat. 58 (2007), 127–135.
[35] Khelifa, F., Druart, M.E., Habibi, Y., Bénard, F., Leclère, P., Olivier, M.-G., Dubois, Ph., Sol–gel incorporation of silica nanofillers for tuning the anti-corrosion protection of acrylate-based coatings. Prog. Org. Coat. 76 (2013), 900–911.
[36] Zheludkevich, M.L., Yasakau, K.A., Poznyak, S.K., Ferreira, M.G.S., Triazole and thiazole derivatives as corrosion inhibitors for AA2024 aluminium alloy. Corros. Sci. 47 (2005), 3368–3383.
[37] Palanivel, V., Huang, Y., van Ooij, W.J., Effects of addition of corrosion inhibitors to silane films on the performance of AA2024-T3 in a 0.5 M NaCl solution. Prog. Org. Coat. 53 (2005), 153–168.
[38] Balaskas, A.C., Curioni, M., Thompson, G.E., Effectiveness of 2-mercaptobenzothiazole, 8-hydroxyquinoline and benzotriazole as corrosion inhibitors on AA 2024-T3 assessed by electrochemical methods. Surf. Interface Anal., 2015 (DOI).
[39] Recloux, I., Mouanga, M., Druart, M.-E., Paint, Y., Olivier, M.-G., Silica mesoporous thin films as containers for benzotriazole for corrosion protection of 2024 aluminium alloys. Appl. Surf. Sci. 346 (2015), 124–133.
[40] González-García, Y., García, S.J., A combined redox-competition and negative-feedback SECM study of self-healing anticorrosive coatings. Electrochem. Commun. 13 (2011), 1094–1097.
[41] Bastos, A.C., Karavai, O.V., Zheludkevich, M.L., Yasakau, K.A., Ferreira, M.G.S., Localised measurements of pH and dissolved oxygen as complements to SVET in the investigation of corrosion at defects in coated aluminum alloy. Electroanalysis 22 (2010), 2009–2016.
[42] Souto, R.M., Fernández-Mérida, L., González, S., SECM imaging of interfacial processes in defective organic coatings applied on metallic substrates using oxygen as redox mediator. Electroanalysis 21 (2009), 2640–2646.
[43] Bastos, A.C., Simões, A.M., Application of the scanning electrochemical microscope to the examination of organic coatings on metallic substrates. Prog. Org. Coat. 53 (2005), 177–182.
[44] Souto, R.M., González-Garcıa, Y., Damage to paint coatings caused by electrolyte immersion as observed in situ by scanning electrochemical microscopy. Corros. Sci. 46 (2004), 2621–2628.
[45] Souto, R.M., González-Garcıa, Y., González, S., In situ monitoring of electroactive species by using the scanning electrochemical microscope. Application to the investigation of degradation processes at defective. Corros. Sci. 47 (2005), 3312–3323.
[46] Zheludkevich, M.L., Yasakau, K.A., Bastos, A.C., Karavai, O.V., Ferreira, M.G.S., On the application of electrochemical impedance spectroscopy to study the self-healing properties of protective coatings. Electrochem. Commun. 9 (2007), 2622–2628.
[47] Andreeva, D.V., Fix, D., Self-healing anticorrosion coatings based on pH-sensitive polyelectrolyte/inhibitor sandwichlike nanostructures. Adv. Mater. 20 (2008), 2789–2794.
[48] Shchukin, D.G., Zheludkevich, M., Layer-by-layer assembled nanocontainers for self-healing corrosion protection. Adv. Mater. 18 (2006), 1672–1678.
[49] Suter, T., Böhni, H., A new microelectrochemical method to study pit initiation on stainless steels. Electrochim. Acta 42 (1997), 3275–3280.
[50] Andreatta, F., Lohrengel, M.M., Terryn, H., Wit, J.H.W.D., Electrochemical characterisation of aluminium AA7075-T6 and solution heat treated AA7075 using a micro-capillary cell. Electrochim. Acta 48 (2003), 3239–3247.
[51] Andreatta, F., Terryn, H., Wit, J.H.W.D., Corrosion behaviour of different tempers of AA7075 aluminium alloy. Electrochim. Acta 49 (2004), 2851–2862.
[52] Birbilis, N., Buchheit, R.G., Investigation and discussion of characteristics for intermetallic phases common to aluminum alloys as a function of solution pH. J. Electrochem. Soc. 155 (2008), C117–C126.
[53] Paussa, L., Andreatta, F., De Felicis, D., Bemporad, E., Fedrizzi, L., Investigation of AA2024-T3 surfaces modified by cerium compounds: a localized approach. Corros. Sci. 78 (2014), 215–222.
[54] Andreatta, F., Druart, M.E., Lanzutti, A., Lekka, M., Cossement, D., Olivier, M.G., Fedrizzi, L., Localized corrosion inhibition by cerium species on clad AA2024 aluminium alloy investigated by means of electrochemical micro-cell. Corros. Sci. 65 (2012), 376–386.
[55] Ralston, K.D., Young, T.L., Buchheit, R.G., Electrochemical evaluation of constituent intermetallics in aluminum alloy 2024-T3 exposed to aqueous vanadate inhibitors. J. Electrochem. Soc. 156 (2009), C135–C146.
[56] Recloux, I., Debliquy, M., Baroni, A., Paint, Y., Lanzutti, A., Fedrizzi, L., Olivier, M.-G., Optimization of synthesis parameters of mesoporous silica sol–gel thin films for application on 2024 aluminum alloy substrates. Appl. Surf. Sci. 277 (2013), 201–210.
[57] Abodi, L.C., Gonzalez-Garcia, Y., Dolgikh, O., Dan, C., Deconinck, D., Mol, J.M.C., Terryn, H., Deconinck, J., Simulated and measured response of oxygen SECM-measurements in presence of a corrosion process. Electrochim. Acta 146 (2014), 556–563.
[58] Santana, J.J., González-Guzmán, J., Fernández-Mérida, L., González, S., Souto, R.M., Visualization of local degradation processes in coated metals by means of scanning electrochemical microscopy in the redox competition mode. Electrochim. Acta 55 (2010), 4488–4494.
[59] Izquierdo, J., Santana, J.J., González, S., Souto, R.M., Uses of scanning electrochemical microscopy for the characterization of thin inhibitor films on reactive metals: the protection of copper surfaces by benzotriazole. Electrochim. Acta 55 (2010), 8791–8800.
[60] Taryba, M.G., Bergh, K.V.d., Strycker, J.D., Novel use of a micro-optode in overcoming the negative influence of the amperometric micro-probe on localized corrosion measurements. Corros. Sci. 95 (2015), 36–41.
[61] Paussa, L., Andreatta, F., Rosero Navarro, N.C., Durán, A., Fedrizzi, L., Study of the effect of cerium nitrate on AA2024-T3 by means of electrochemical micro-cell technique. Electrochim. Acta 70 (2012), 25–33.
