H. Gerrens, "Handbuch der technischen polymerchemie," Chem. Ingenieur Technik, vol. 66, no. 2, p. 239, 1994.
M. M. Crowley et al., "Pharmaceutical applications of hot-melt extrusion: Part I," Drug Develop. Ind. Pharmacy, vol. 33, no. 9, pp. 909-926, 2007.
J. R. Hughey, J. M. Keen, D. A. Miller, K. Kolter, N. Langley, and J. W. McGinity, "The use of inorganic salts to improve the dissolution characteristics of tablets containing soluplus-based solid dispersions," Eur. J. Pharmaceutical Sci., vol. 48, nos. 4-5, pp. 758-766, Mar. 2013.
M. A. Repka et al., "Pharmaceutical applications of hot-melt extrusion: Part II," Drug Develop. Ind. Pharmacy, vol. 33, no. 10, pp. 1043-1057, 2007.
A. L. Sarode, H. Sandhu, N. Shah, W. Malick, and H. Zia, "Hot melt extrusion (HME) for amorphous solid dispersions: Predictive tools for processing and impact of drug-polymer interactions on supersaturation," Eur. J. Pharmaceutical Sci., vol. 48, no. 3, pp. 371-384, Feb. 2013.
J. Thiry, F. Krier, and B. Evrard, "A review of pharmaceutical extrusion: Critical process parameters and scaling-up," Int. J. Pharmaceutics, vol. 479, no. 1, pp. 227-240, Feb. 2015.
J. Schlosburg, "Twin-screw food extrusion: Control case study," Rensselaer Polytech. Inst., Troy, NY, USA, Tech. Rep., 2005.
L. Wang, S. Smith, and C. Chessari, "Continuous-time model predictive control of food extruder," Control Eng. Pract., vol. 16, no. 10, pp. 1173-1183, Oct. 2008.
M. Trifkovic, M. Sheikhzadeh, K. Choo, and S. Rohani, "Model predictive control of a twin-screw extruder for thermoplastic vulcanizate (TPV) applications," Comput. Chem. Eng., vol. 36, pp. 247-254, Jan. 2012.
R. G. Moreira, A. K. Srivastava, and J. B. Gerrish, "Feedforward control model for a twin-screw food extruder," Food Control, vol. 1, no. 3, pp. 179-184, Jul. 1990.
P. Zhou, H. Liu, K. Tan, and C. Chen, "Application and research of fuzzy control simulation in twin screw extruder," Procedia Eng., vol. 29, pp. 542-546, 2012.
B. Singh and S. J. Mulvaney, "Modeling and process control of twinscrew cooking food extruders," J. Food Eng., vol. 23, no. 4, pp. 403-428, Jan. 1994.
M. Kulshreshtha and C. Zaror, "Unsteady state model for twin screw extruders," Food Bioproducts Process., Trans. Inst. Chem. Eng. C, vol. 70, no. 1, pp. 21-28, 1992.
S. E. Choulak, "Modélisation et commande d'un procédé d'extrusion reáctive," Ph.D. dissertation, Lab. d'Automatique Génie Procédés (LAGEP), Univ. Claude Bernard-Lyon I, Villeurbanne, France, 2004.
J. Grimard, L. Dewasme, J. Thiry, F. Krier, B. Evrard, and A. V. Wouwer, "Modeling, sensitivity analysis and parameter identification of a twin screw extruder," IFAC-PapersOnLine, vol. 49, no. 7, pp. 1127-1132, 2016.
C.-H. Li, "Modelling extrusion cooking," Math. Comput. Model., vol. 33, nos. 6-7, pp. 553-563, Mar. 2001.
R. Baron, P. Vauchel, R. Kaas, A. Arhaliass, and J. Legrand, "Dynamical modelling of a reactive extrusion process: Focus on residence time distribution in a fully intermeshing co-rotating twin-screw extruder and application to an alginate extraction process," Chem. Eng. Sci., vol. 65, no. 10, pp. 3313-3321, May 2010.
A. Eitzlmayr et al., "Mechanistic modeling of modular co-rotating twinscrew extruders," Int. J. Pharmaceutics, vol. 474, nos. 1-2, pp. 157-176, Oct. 2014.
J. Grimard, L. Dewasme, and A. V. Wouwer, "A review of dynamic models of hot-melt extrusion," Processes, vol. 4, no. 2, p. 19, Jun. 2016.
M. L. Booy, "Isothermal flow of viscous liquids in corotating twin screw devices," Polym. Eng. Sci., vol. 20, no. 18, pp. 1220-1228, Dec. 1980.
O. S. Carneiro, J. A. Covas, and B. Vergnes, "Experimental and theoretical study of twin-screw extrusion of polypropylene," J. Appl. Polym. Sci., vol. 78, no. 7, pp. 1419-1430, 2000.
A. Khalifeh and J.-R. Clermont, "Numerical simulations of nonisothermal three-dimensional flows in an extruder by a finite-volume method," J. Non-Newtonian Fluid Mech., vol. 126, no. 1, pp. 7-22, Feb. 2005.
W. Yacu, "Modeling a twin screw co-rotating extruder," J. Food Process Eng., vol. 8, no. 1, pp. 1-21, 1985.
M. Kulshreshtha, D. Jukes, and C. Zaror, "Generalized steady state model for twin screw extruders," Food Bioproducts Process., vol. 69, pp. 189-199, 1991.
A. V. Wouwer, P. Saucez, and C. Vilas, Simulation of Ode/Pde Models with MATLAB, OCTAVE and SCILAB: Scientific and Engineering Applications. Cham, Switzerland: Springer, 2014.
M. Diagne, V. Dos Santos Martins, F. Couenne, B. Maschke, and C. Jallut, "Modélisation d'un procédé d'extrusion par deux systèmes d'équations d'évolution couplés par une interface mobile," J. européen des systèmes automatisés, vol. 45, nos. 7-10, pp. 665-691, 2011.
E. Walter and L. Pronzato, Identification of Parametric Models: From Experimental Data (Communications and Control Engineering) vol. 8, 1st ed. London, U.K.: Springer-Verlag, 1997.
J. M. Lemos, R. Neves-Silva, and J. M. Igreja, Adaptive Control of Solar Energy Collector Systems, vol. 253. Cham, Switzerland: Springer, 2014.
L. Grüne and J. Pannek, Nonlinear Model Predictive Control. London, U.K.: Springer, 2011, pp. 43-66.
J. B. Rawlings and D. Q. Mayne, Model Predictive Control: Theory and Design. Portland, OR, USA: Nob Hill Publishing, 2009.
R. M. C. De Keyser and A. R. Van Cauwenberghe, "A self-tuning predictor as operator guide," IFAC Proc. Volumes, vol. 12, no. 8, pp. 1249-1256, Sep. 1979.
R. M. C. De Keyser and A. R. Van Cauwenberghe, "Self-tuning loadfollowing control of a nuclear power plant," IFAC Proc. Volumes, vol. 13, no. 8, pp. 227-234, 1980.
R. M. C. De Keyser, "Improved mould-level control in a continuous steel casting line," Control Eng. Pract., vol. 5, no. 2, pp. 231-237, Feb. 1997.
M. Gálvez-Carrillo, R. De Keyser, and C. Ionescu, "Nonlinear predictive control with dead-time compensator: Application to a solar power plant," Sol. Energy, vol. 83, no. 5, pp. 743-752, May 2009.
R. De Keyser, "Model based predictive control for linear systems," Control Syst., Robot. AutomatioN, Adv. Control Syst., vol. XI, p. 24, 2009.
C. M. Ionescu, C. I. Muresan, D. Copot, and R. De Keyser, "Constrained multivariable predictive control of a train of cryogenic 13C separation columns," IFAC-PapersOnLine, vol. 49, no. 7, pp. 1103-1108, 2016.