N. Murer, R. Oltra, B. Vuillemin, and O. Néel Numerical modelling of the galvanic coupling in aluminium alloys: a discussion on the application of local probe techniques Corros. Sci. 52 2010 130 139
A.-P. Romano, M.-G. Olivier, A. Nazarov, and D. Thierry Influence of crosslinking density of a cataphoretic coating on initiation and propagation of filiform corrosion of AA6016 Prog. Org. Coat. 66 2009 173 182
Geraint Williams, Andrew J. Coleman, and H. Neil McMurray Inhibition of Aluminium Alloy AA2024-T3 pitting corrosion by copper complexing compounds Electrochim. Acta 55 2010 5947 5958
E. Harscoet, and D. Froelich Use of LCA to evaluate the environmental benefits of substituting chromic acid anodizing (CAA) J. Clean. Prod. 16 2008 1294 1305
H.A. Katzman, G.M. Malouf, R. Bauer, and G.W. Stupian Corrosion-protective chromate coatings on aluminum Appl. Surf. Sci. 2 1979 416 432
P. Campestrini, E.P.M. van Westing, A. Hovestad, and J.H.W. de Wit Investigation of the chromate conversion coating on Alclad 2024 aluminium alloy: effect of the pH of the chromate bath Electrochim. Acta 47 2002 1097 1113
D. Wang, and G.P. Bierwagen Sol-gel coatings on metals for corrosion protection Prog. Org. Coat. 64 4 2009 327 338
M.E. Druart, J.B. Richir, C. Poirier, F. Maseri, N. Godeau, L. Langer, and M.-G. Olivier Influence of sol-gel application conditions on metallic substrate for optical applications Corros. Eng. Sci. Technol. 46 2011 677 684
A.-P. Romano, M. Fedel, F. Deflorian, and M.-G. Olivier Silane sol-gel film as pretreatment for improvement of barrier properties and filiform corrosion resistance of 6016 aluminium alloy covered by cataphoretic coating Prog. Org. Coat. 72 2011 695 702
J.B. Bajat, I. Milošev, Ž. Jovanović, R.M. Jančić-Heinemann, M. Dimitrijević, and V.B. Mišković-Stanković Corrosion protection of aluminium pretreated by vinyltriethoxysilane in sodium chloride solution Corros. Sci. 52 3 2010 1060 1069
I. Recloux, M. Debliquy, A. Baroni, Y. Paint, A. Lanzutti, L. Fedrizzi, and M.-G. Olivier Optimization of synthesis parameters of mesoporous silica sol-gel thin films for application on 2024 aluminum alloy substrates Appl. Surf. Sci. 277 2013 201 210
G.D. Sulka, and K.G. Parkoła Temperature influence on well-ordered nanoporestructures grown by anodization of aluminium in sulphuric acid Electrochim. Acta 52 2007 1880 1888
G. Boisier, N. Pébère, C. Druez, M. Villatte, and S. Suel FESEM and EIS study of sealedAA2024 T3 anodized in sulfuric acid electrolytes: influence of tartaric acid J. Electrochem. Soc. 155 2008 C521 C529
L. Domingues, J.C.S. Fernandes, M. Da Cunha Belo, M.G.S. Ferreira, and L. Guerra-Rosa Anodising of Al 2024-T3 in a modified sulphuric acid/boric acid bath for aeronautical applications Corros. Sci. 45 2002 149 160
G.D. Sulka, and W.J. Stepniowski Structural features of self-organized nanopore arrays formed by anodization of aluminum in oxalic acid at relatively high temperatures Electrochim. Acta 54 2009 3683 3691
F. Khelifa, M.-E. Druart, Y. Habibi, F. Bénard, Ph. Leclère, M.-G. Olivier, and Ph. Dubois Sol-gel incorporation of silica nanofillers for tuning the anti-corrosion protection of acrylate-based coatings Prog. Org. Coat. 76 5 2013 900 911
F. Khelifa, M.-E. Druart, Y. Habibi, R. Rioboo, M.-G. Olivier, J. De Coninck, and Ph. Dubois Effect of photo-crosslinking on the performance of silica nanoparticle-filled epoxidized acrylic copolymer coatings J. Mater. Chem. A 1 35 2016 10334 10344
V.B. Mišković-Stanković, M.R. Stanić, and D.M. Dražić Corrosion protection of aluminium by a cataphoretic epoxy coating Prog. Org. Coat. 36 1999 53 63
J. Singh-Beemat, J.O. Iroh, and L. Feng Mechanism of corrosion protection of aluminum alloy substrate by hybrid polymer nanocomposite coatings Prog. Org. Coat. 76 2013 1576 1580
A. Foyet, T.H. Wu, L. van der Ven, A. Kodentsov, G. de With, and R. van Benthem Influence of mixing ratio on the permeability of water and the corrosion performance of epoxy/amine coated un-pretreated Al-2024 evaluated by impedance spectroscopy Prog. Org. Coat. 64 2009 138 141
N.N.A.H. Meis, L.G.J. van der Ven, R.A.T.M. van Benthem, and G. de With Extreme wet adhesion of a novel epoxy-amine coating on aluminum alloy 2024-T3 Prog. Org. Coat. 77 2014 176 183
H. Ishida, and D. Allen Physical and mechanical characterization of near-zero shrinkage poly benzoxazines J. Polym. Sci. B: Polym. Phys. 34 1996 1019 1030
M.C. Tseng, and Y.L. Liu Self-assembled benzoxazine-bridged polysilsesquioxanes exhibiting ultralow-dielectric constants and yellow-light photoluminescent emission Polymer 51 2010 5565 5567
T. Takeichi, T. Kawauchi, and T. Agag High performance polybenzoxazines as a novel type of phenolic resin Polym. J. 40 2008 1121 1131
G. Lligadas, A. Tüzün, J.C. Ronda, M. Galià, and V. Càdiz Polybenzoxazines: new players in the bio-based polymer arena Polym. Chem. 5 2014 6636 6644
J. Escobar, M. Poorteman, L. Dumas, L. Bonnaud, Ph. Dubois, and M.-G. Olivier Thermal curing study of bisphenol A benzoxazine for barrier coating applications on 1050 aluminum alloy Prog. Org. Coat. 70 2013 53 61
H. Oie, A. Sudo, and T. Endo Acceleration effect of N-allyl group on thermally induced ring-opening polymerization of 1,3-benzoxazine J. Polym. Sci. Part A 96 2011 708 718
L. Dumas, L. Bonnaud, M.-G. Olivier, M. Poorteman, and Ph. Dubois High performance benzoxazine/CNT nanohybrid network - An easy and scalable way to combine attractive properties Eur. Polym. J. 58 2014 218 225
T. Agag, and T. Takeichi Synthesis and characterization of novel benzoxazine monomers containing allyl groups and their high performance thermosets Macromolecules 48 23 2010 5357 5363
T. Takeichi, Y. Guo, and S. Rimdusit Performance improvement of polybenzoxazine by alloying with polyimide: effect of preparation method on the properties Polymer 46 2005 4909 4916
L. Dumas, L. Bonnaud, M.-G. Olivier, M. Poorteman, and Ph. Dubois Facile preparation of a novel high performance benzoxazine - CNT based nano-hybrid network exhibiting outstanding thermo-mechanical properties Chem. Commun. 49 2013 9543 9545
A. Sudo, L.-C. Du, S. Hirayama, and T. Endo Substituent effects of N-alkyl groups on thermally induced polymerization behavior of 1,3-benzoxazines J. Polym. Sci. A: Polym. Chem. 48 2010 2777 2782
S. Bagherifam, T. Uyar, H. Ishida, and J. Hacaloglu The use of pyrolysis mass spectrometry to investigate polymerization and degradation processes of methyl amine-based benzoxazine Polym. Test. 29 2010 520 526
S. Bagherifam, T. Uyar, H. Ishida, and J. Hacaloglu Investigation of polymerization of benzoxazines and thermal degradation characteristics of polybenzoxazines via direct pyrolysis mass spectrometry Polym. Int. 61 2012 1532 1541
X. Wang, F. Chen, and Y. Gu Influence of electronic effects from bridging groups on synthetic reaction and thermally activated polymerization of bisphenol-based benzoxazines J. Polym. Sci. A: Polym. Chem. 49 2011 1443 1452
D. Allen, and H. Ishida Effect of phenol substitution on the network structure and properties of linear aliphatic diamine-based benzoxazines Polymer 50 2009 613 626
A. Sudo, R. Kudoh, H. Nakayama, K. Arima, and T. Endo Selective formation of poly (N,O-acetal) by polymerization of 1,3-benzoxazine and its main chain rearrangement Macromolecules 41 2008 9030 9034
P. Chutayothin, and H. Ishida Cationic ring-opening polymerization of 1,3-benzoxazines: mechanistic study using model compounds Macromolecules 43 2010 4562 4572
V.M. Russell, J. Koenig, H. Low, and H. Ishida Study of the characterization and curing of benzoxazines using 13C solid-state nuclear magnetic resonance J. Appl. Polym. Sci. 70 1998 1413 1425
C. Liu, D. Shen, R.-M. Sebastián, J. Marquet, and R. Schönfeld Mechanistic studies on ring-opening polymerization of benzoxazines: a mechanistically based catalyst design Macromolecules 44 2011 4616 4622
Friedrich Kremer, and Andreas Schönhals Broadband Dielectric Spectroscopy 2013 Springer 359
P. Zoltowski On the electrical capacitance of interfaces exhibiting constantphase element behaviour J. Electroanal. Chem. 443 1998 149 154
M. Dornbush, S. Kirsch, C. Henzel, C. Deschamps, S. Overmeyer, K. Cox, M. Wiedow, U. Tromsdorf, M. Dargatz, and U. Meisenburg Characterization of the water uptake and electrolyte uptake of organic coatings and the consequence by means of electrochemical impedance spectroscopy and UV-vis spectroscopy Prog. Org. Coat. 89 2015 332 343
Hongwei Shi, En-Hou Han, S.V. Lamaka, M.L. Zheludkevich, Fuchun Liu, and M.G.S. Ferreira Cerium cinnamate as an environmentally benign inhibitor pigment for epoxy coatings on AA 2024-T3 Prog. Org. Coat. 77 2014 765 773
D. Zhang, H. Qian, L. Wang, and X. Li Comparison of barrier properties for a superhydrophobic epoxy coating under different simulated corrosion environments Corros. Sci. 103 2016 230 241
F. Cotting, and I.V. Aoki Smart protection provided by epoxy clear coating doped with polystyrene microcapsules containing silanol and Ce(III) ions as corrosion inhibitors Surf. Coat. Technol. 2015 available online 22.11.15
Zongxue Yu, Haihui Di, Yu Ma, Liang Lv, Yang Pan, and Chunli Zhang Fabrication of graphene oxide-alumina hybrids to reinforce the anti-corrosion performance of composite epoxy coatings Appl. Surf. Sci. 351 2015 986 996
D.M. Brascher, and A.H. Kingsbury Electrical measurements in the study of immersed paint coatings on metal I. Comparison between capacitance and gravimetric methods of estimating water-uptake J. Appl. Chem 4 1954 62
A. Amirudin, and D. Thierry Application of electrochemical impedance spectroscopy to study the degradation of polymer-coated metals Prog. Org. Coat. 26 2 1995 1 28
S. Morsch, S. Lyon, and S.D. Smith Mapping water uptake in an epoxy-phenolic coating Prog. Org. Coat. 86 2015 173 180