J. Zhou, A.V. Ellis and N.H. Voelcker, Recent developments in PDMS surface modification for microfluidic devices, Electrophoresis, 31, 2-16 (2010).
J. Zhou, D. A. Khodakov, A.V. Ellis and N. H. Voelcker, Surface modification for PDMS-based microfluidic devices, Electrophoresis, 33, 89-104 (2012).
J.C. McDonald, D.C. Duffy, J.R. Anderson, D.T. Chiu, H. Wu, O.J. Schueller and G.M. Whitesides, Fabrication of microfluidic systems in poly(dimethylsiloxane), Electrophoresis, 21, 27-40 (2000).
Y. Hongbin, Z. Guangya, C.F. Siong, W. Shouhua and L. Feiwen, Novel polydimethylsilox- ane (PDMS) based microchannel fabrication method for lab-on-a-chip application, Sensors Actuators, B 137, 754-761 (2009).
F. Abbasi, H. Mirzadeh and A.-A. Katbab, Modification of polysiloxane polymers for biomedical applications: A review, Polym. Int., 50, 1279-1287 (2001).
M.C. Belanger and Y. Marois, Hemocompatibility, biocompatibility, inflammatory and in vivo studies of primary reference materials low-density polyethylene and polydimethylsiloxane: A review, J. Biomed. Mater. Res. A, 58, 467-477 (2001).
G.D. Friends, J.F. Kunzler and R.M. Ozark, Recent advances in the design of polymers for contact lenses, Macromol. Symp., 98, 619-631 (1995).
V. Compan, A. Lopez-Alemany, E. Riande and M.F. Refojo. Biological oxygen apparent trans- missibility of hydrogel contact lenses with and without organosilicon moieties, Biomaterials, 25, 359-365 (2003).
S.S Lateef, S.B Boateng, T. J. Hartman and L. Hanley, GRGDSP peptide bound silicone membranes withstand mechanical flexing in vitro and display enhanced fibroblast adhesion, Biomaterials, 23, 3159-3168 (2002).
C.A Malpass, K.W. Millsap, H. Sidhu and L.B. Gower, Immobilization of an oxalate-degrading enzyme on silicone elastomer, J. Biomed. Mater. Res., 63, 822-829 (2002).
W.R. Childs, M.J. Motala, K.J. Lee and R.G. Nuzzo, Masterless soft lithography: Patterning UV/ozone-induced adhesion on poly(dimethylsiloxane) surfaces, Langmuir, 21, 10096-10105 (2005).
R. Anderson, B. Arkles and G.L. Larson, Silicon Compounds, Register and Review, Petrarch Systems, Bristol, PA, USA (1987).
H. Meynen, M.V. Blucke, M. Gonzalez, B. Harkness, G. Gardner, J. Sudbury-Holtschlag, B. Vandevelde, C. Winters and E. Beyne, Ultra low stress and low temperature patternable silicone materials for applications within microelectronics, Microelectronic Eng., 76, 212-218 (2004).
V.M. Graubner and D. Clemens, Neutron reflectometry and spectroscopic ellipsometry studies of cross-linked poly(dimethylsiloxane) after irradiation at 172 nm, Langmuir, 21, 8940-8946 (2005).
T. Meyer, H. Hedler, L. Larson and M. Kunselman: A new approach to wafer-level packaging employs spin-on and printable silicones, Chip Scale Review, 8, 65-71 (2004).
J. Roth, V. Albercht, M. Nitschke, C. Bellmann, F. Simon, S. Zchoche, S. Michel, C. Luhmann, K. Grundke and B. Voit, Surface functionalization of silicone rubber for permanent adhesion improvement, Langmuir, 24, 12603-12611 (2008).
K.L. Mittal, The role of the interface in adhesion phenomena, Polym. Eng. Sci., 17, 467-473 (1977).
H. Makamba, J.H. Kim, K. Lim, N. Park and J.H. Hahn, Surface modification of poly(dimethylsiloxane) microchannels, Electrophoresis, 24, 3607-3619 (2003).
I. Wong and C.M. Ho, Surface molecular property modifications for poly(dimethylsiloxane) (PDMS) based microfluidic devices, Microfluidics Nanofluidics, 7, 291-306 (2009).
F. de Buyl, Silicones sealants and structural adhesives, Int. J. Adhesion Adhesives, 21, 411-422 (2001).
G. Heinrich and M. Kluppel, Recent advances in the theory of filler networking in elastomers, Adv. Polym. Sci., 160, 1-44 (2002).
A. Colas and J. Curtis, B-Silicones, in: Biomaterials Science. An Introduction to Materials in Medicine (Third Edition), Section 1.2 Classes of materials used in medicine, B.D. Ratner, A.S. Hoffman, F.J. Schoen and J.E. Lemons (Eds), pp. 82-91, Elsevier, Oxford (2013).
A.J. Chalk and J.F Harrod, Homogeneous Catalysis. II. The mechanism of the hydrosilation of olefins catalyzed by group VIII metal complexes, J. Am. Chem. Soc., 87, 16-21 (1965).
C. Chen J. Wang and Z. Chen, Surface restructuring behavior of various types of poly(dimethylsiloxane) in water detected by SFG, Langmuir, 20, 10186-10193 (2004).
A. Carlos, C.A. Barrios, Q. Xu, T. Cutright and B.Z. Newby, Incorporating zosteric acid into silicone coatings to achieve its slow release while reducing fresh water bacterial attachment, Colloids Surfaces B, 41, 83-93 (2005).
A. Beigbeder, M. Jeusette, R. Mincheva, M. Claes, P. Brocorens, R. Lazzaroni and Ph. Dubois, On the effect of carbon nanotubes on the wettability and surface morphology of hydrosilylation-curing silicone coatings, J. Nanostruct. Polym. Nanocomposites, 5, 37-43 (2009).
M.J. Owen, Siloxane surface activity, in: Silicon Based Polymer Science: A Comprehensive Resource, J.M. Zeigler and F.W.G. Fearon (Eds), pp. 705-739, American Chemical Society, Washington, D.C. (1990).
A. Beigbeder, P. Degee, S.L. Conlan, R.J. Mutton, A.S. Clare, M.E. Pettitt, M.E. Callow, J.A. Callow and P. Dubois, Preparation and characterisation of silicone-based coatings filled with carbon nanotubes and natural sepiolite and their application as marine fouling-release coatings, Biofouling, 24, 291-302 (2008).
A. Beigbeder, C. Labruyere, P. Viville, M.E. Pettitt, M.E. Callow, J.A. Callow, L. Bonnaud, R. Lazzaroni and P. Dubois. Surface and fouling-release properties of silicone/organ omodified montmorillonite coatings, J. Adhesion Sci. Technol., 25, 1689-1700 (2011).
E. Martinelli, M. Suffredini, G. Galli, A. Glisenti, M.E. Pettitt, M.E. Callow, J.A. Callow, D.J. Williams and G. Lyall, Amphiphilic block copolymer/poly(dimethylsiloxane) (PDMS) blends and nanocomposites for improved fouling-release, Biofouling, 27, 529-541 (2011).
D.T. Eddington, J.P. Puccinelli and D.J. Beebe, Thermal aging and reduced hydrophobic recovery of polydimethylsiloxane, Sensors Actuators B, 114, 170-172 (2006).
J.A. Vickers, M.M. Caulum and C.S. Henry, Generation of hydrophilic poly (dimethylsiloxane) for high-performance microchip electrophoresis, Anal. Chem., 78, 7446-7452 (2006).
S.H. Tan, N.T. Nguyen, Y.C. Chua and T.G. Kang, Oxygen plasma treatment for reducing hydro- phobicity of a sealed polydimethylsiloxane (PDMS) microchannel, Biomicrofluidics, 4, 032204 (2010).
L. Lavielle and J. Schultz, Surface properties of graft polyethylene in contact with water: I. Orientation phenomena, J. Colloid Interface Sci., 106, 438-445 (1985).
L.H. Zhao, J. Lee and P.N. Sen, Long-term retention of hydrophilic behavior of plasma treated polydimethylsiloxane (PDMS) surfaces stored under water and Luria-Bertani broth, Sensors Actuators A, 181, 33- 42 (2012).
K. Chau, B. Millare, A. Lin, S. Upadhyayula, V. Nunez, H. Xu and V.I. Vullev, Dependence of the quality of adhesion between poly(dimethylsiloxane) and glass surfaces on the composition of the oxidizing plasma, Microfluidics Nanofluidics, 10, 907-917 (2011).
D. Fuard, T. Tzvetkova-Chevolleau, S. Decossas, P. Tracqui and P. Schiavone, Optimization of poly-di-methyl-siloxane (PDMS) substrates for studying cellular adhesion and motility, Microelectronic Eng., 85, 1289-1293 (2008).
P. Bodo and J.E. Sundgren, Titanium deposition onto ion-bombarded and plasma-treated polydimethylsiloxane: Surface modification, interface and adhesion, Thin Solid Films, 136, 147-159 (1986).
V. Anand, S. Ghosh, M. Ghosh, G Mohan Rao, R. Railkar and R.R. Dighe, Surface modification of PDMS using atmospheric glow discharge polymerization of tetrafluoroethane for immobilization of biomolecules, Appl. Surface Sci., 257, 8378-8384 (2011).
M.E. Vlachopoulou, P.S. Petrou, S.E. Kakabakos, A. Tserepi, K. Beltsios and E. Gogolides, Effect of surface nanostructuring of PDMS on wetting properties, hydrophobic recovery and protein adsorption, Microelectronic Eng., 86, 1321-1324 (2009).
H.T. Kim and O.C. Jeong, PDMS surface modification using atmospheric pressure plasma, Microelectronic Eng., 88, 2281-2285 (2011).
D. Lee and S. Yang, Surface modification of PDMS by atmospheric-pressure plasma-enhanced chemical vapor deposition and analysis of long-lasting surface hydrophilicity, Sensors Actuators B, 162, 425-434 (2012).
C. Jensen, L. Gurevich, A. Patriciu, J. Struijk, V. Zachar and C.P. Pennisi, Stable hydrophilic poly- dimethylsiloxane surfaces produced by plasma treatment for enhanced cell adhesion. In: IFMBE Proceedings, 15th Nordic-Baltic Conference on Biomedical Engineering and Medical Physics, pp 105-108 (2011).
K. Haubert, T. Drier and D. Beebe, PDMS bonding by means of a portable, low-cost corona system, Lab Chip., 6, 1548-1549 (2006).
M. Meincken, T.A. Berhane and P.E. Mallon, Tracking the hydrophobicity recovery of PDMS compounds using the adhesive force determined by AFM force distance measurements, Polymer, 46, 203-208 (2005).
K. Efimenko, WE. Wallace and J. Genzer, Surface modification of Sylgard-184 poly(dimethyl siloxane) networks by ultraviolet and ultraviolet/ozone treatment, J. Colloid Interface Sci., 254, 306-315 (2002).
A. Olah, H. Hillborg and G.J. Vancso, Hydrophobic recovery of UV/ozone treated poly(dimethylsiloxane): Adhesion studies by contact mechanics and mechanism of surface modification, Appl. Surface Sci., 239, 410-423 (2005).
Y. Berdichevsky, J. Khandurina, A. Guttman and Y.-H. Lo, UV/ozone modification of poly(dimethylsiloxane) microfluidic channels, Sensors Actuators B, 97, 402-408, (2004).
K. Ma, J. Rivera, G. J. Hirasaki and S.L. Biswal, Wettability control and patterning of PDMS using UV-ozone and water immersion, J. Colloid Interface Sci., 363, 371-378 (2011).
M.T. Khorasani and H. Mirzadeh, BHK cells behaviour on laser treated polydimethylsiloxane surface, Colloids Surfaces B, 35, 67-71(2004).
J.J. Cunningham, J. Nikolovski, J.J. Linderman and D.J. Mooney, Quantification of fibronectin adsorption to silicone-rubber cell culture substrates, BioTechniques, 32, 876-887 (2002).
L.M. Pakstis, J.P. Dunkers, A. Zheng, T.V. Vorburger, T.P. Quinn and M.T. Cicerone, Evaluation of polydimethylsiloxane modification methods for cell response, J. Biomed. Mater. Res. A, 92, 604-614 (2010).
C.Y. Gao, Y.Y. Guo, J. He, M. Wu, Y. Liu, Z.L. Chen, WS. Cai, Y.L. Yang, C. Wang and X.Z. Feng, L-3,4 dihydroxyphenylalanine-collagen modified PDMS surface for controlled cell culture, J. Mater. Chem., 22, 10763-10770 (2012).
Z. Wu and K. Hjort, Surface modification of PDMS by gradient-induced migration of embedded Pluronic, Lab Chip., 9, 1500-1503 (2009).
B. Han, Y. Xu, L. Zhang, X. Yang and E. Wang, Surface modification of poly(dimethylsiloxane) microchips using a double-chained cationic surfactant for efficiently resolving fluorescent dye adsorption, Talanta, 79, 959-962 (2009).
K. Fukazawa and K. Ishihara, Simple surface treatment using amphiphilic phospholipid polymers to obtain wetting and lubricity on polydimethylsiloxane-based substrates, Colloids Surfaces B, 97, 70- 76 (2012).
G. Decher, J.D. Hong and J. Schmitt, Buildup of ultrathin multilayer films by a self-assembly process: III. Consecutively alternating adsorption of anionic and cationic polyelectrolytes on charged surfaces, Thin Solid Films, 210/211, 831-835 (1992).
WB. Stockton and M.F. Rubner, Molecular-level processing of conjugated polymers. 4. Layer- by-Layer manipulation of polyaniline via hydrogen-bonding interactions, Macromolecules, 30, 2717-2725 (1997).
E. Kharlampieva, V. Kozlovskaya and S.A. Sukhishvili, Layer-by-layer hydrogen-bonded polymer films: From fundamentals to applications, Adv. Mater., 21, 3053-3065 (2009).
G.K. Such, J.F. Quinn, A. Quinn, E. Tjipto and F. Caruso, Assembly of ultrathin polymer multilayer films by click chemistry, J. Am. Chem. Soc., 128, 9318-9319 (2006).
F. Wang, N. Ma, Q. Chen, W Wang and L. Wang, Halogen bonding as a new driving force for layer-by-layer assembly, Langmuir, 23, 9540-9542 (2007).
H.M. Xiong, M.H. Cheng, Z. Zhou, X. Zhang and J.C. Shen, A new approach to the fabrication of a self-organizing film of heterostructured polymer/Cu2S nanoparticles, Adv. Mater., 10, 529-532 (1998).
Y. Shimazaki, M. Mitsuishi, S. Ito and M. Yamamoto, Preparation of the layer-by-layer deposited ultrathin film based on the charge-transfer interaction, Langmuir, 13, 1385-1387 (1997).
T. Tang, J. Qu, K. Müllen and S.E. Webber, Molecular layer-by-layer self-assembly of water-soluble perylene diimides through n-n and electrostatic interactions, Langmuir, 22, 26-28 (2006).
Y. Ogawa, Y. Arikawa, T Kida and M. Akashi, Fabrication of novel layer-by-layer assembly films composed of poly(lactic acid) and polylysine through cation-dipole interactions, Langmuir, 24, 8606-8609 (2008).
M. Li, H. Ai, D.K. Mills, Y.M. Lvov, M.J. McShane and B.K. Gale, Using microfabrication and electrostatic layer-by-layer (LbL) self-assembly technologies to improve the growth and alignment of smooth muscle cells. in: Proc. 2nd Annual International IEEE-EMBS Special Topic Conference on Microtechnologies in Medicine and Biology 109-114 (2002).
H. Ai, Y.M. Lvov, D.K. Mills, H. Meng, X. Qiao, J.S. Alexander and S.A. Jones, Coating bio-nanofilm on PDMS through layer-by-layer self-assembly. in: Proc. Annual International Conference of the IEEE Engineering in Medicine and Biology Society - EMBC 1, 608-609 (2002).
J.S. Park, S.M. Cho, G.Y. Han, S.J. Sim, J. Park and PJ. Yoo, Phase controllable transfer printing of patterned polyelectrolyte multilayers, Langmuir, 25, 2575-2581 (2009).
G. Mehta, M.J. Kiel, J.W Lee, N. Kotov, J.J. Linderman and S. Takayama, Polyelectrolyte-clay- protein layer films on microfluidic PDMS bioreactor surfaces for primary murine bone marrow culture, Adv. Funct. Mater., 17, 2701-2709 (2007).
G.T. Roman and C.T. Culbertson, Surface engineering of poly(dimethylsiloxane) microfluidic devices using transition metal sol-gel chemistry, Langmuir, 22, 4445-4451 (2006).
S. Duo, M. Li, M. Zhua and Y. Zhoua, Polydimethylsiloxane/silica hybrid coatings protecting Kapton from atomic oxygen attack, Mater. Chem. Phys., 112, 1093-1098 (2008).
D. Maji, S.K. Lahiri and S. Das, Study of hydrophilicity and stability of chemically modified PDMS surface using piranha and KOH solution, Surface Interface Anal., 44, 62-69 (2012).
J.Y. Park, D. Ahn, Y.Y. Choi, C.M. Hwang, S. Takayama, S.H. Lee and S.H. Lee, Surface chemistry modification of PDMS elastomers with boiling water improves cellular adhesion, Sensors Actuators B, 173, 765-771 (2012).
N. Völcker, D. Klee, H. Höcker and S. Langefeld, Functionalization of silicone rubber for the covalent immobilization of fibronectin, J. Mater. Sci. Mater. Med., 12, 111-119 (2001).
T Okada and Y. Ikada, In vitro and in vivo digestion of collagen covalently immobilized onto the silicone surface, J. Biomed. Mater. Res., 26, 1569-1581 (1992).
T Okada and Y. Ikada, Modification of silicone surface by graft polymerization of acrylamide with corona discharge, Makromol. Chem., 192, 1705-1713 (1991).
G.H. Hsiue, S.D. Lee, C.C. Wang, M.H. Shiue and P.C. Chang, Plasma-induced graft copolymerization of HEMA onto silicone rubber and TPX film improving rabbit cornea1 epithelial cell attachment and growth, Biomaterials, 15, 163-171(1994).
D.S. Bodas and C. Khan-Malek, Fabrication of long-term hydrophilic surfaces of poly(dimethyl siloxane) using 2-hydroxy ethyl methacrylate, Sensors Actuators B, 120, 719-723 (2007).
Z. Almutairi, C.L. Ren and L. Simon, Evaluation of polydimethylsiloxane (PDMS) surface modification approaches for microfluidic applications, Colloids Surfaces A, 415, 406-412 (2012).
S. Hemmila, J.V. Cauich-Rodriguez, J. Kreutzer and P. Kallio, Rapid, simple, and cost-effective treatments to achieve long-term hydrophilic PDMS surfaces, Appl. Surface Sci., 258, 9864-9875 (2012).
J. Li, M. Wang and Y. Shen, Chemical modification on top of nanotopography to enhance surface properties of PDMS, Surface Coat. Technol., 206, 2161-2167 (2012).
M.T. Khorasani, H. Mirzadeha and P.G. Sammes, Laser surface modification of polymers to improve biocompatibility: HEMA grafted PDMS, in vitro assay-III, Radiat. Phys. Chem., 55, 685-689 (1999).
M. T. Khorasani and H. Mirzadeh, In Vitro blood compatibility of modified PDMS surfaces as superhydrophobic and superhydrophilic materials, J. Appl. Polym. Sci., 91, 2042-2047 (2004).
H. Yang and Z. Hou, Homogeneous grafted poly(acrylic acid) brushes on ultra-flat polydimethylsiloxane (PDMS) films by UV irradiation, Nano Biomed. Eng., 3, 42-46 (2011).
H. Yang, Z. Hou and J. Hu, Surface modification of ultra-flat polydimethylsiloxane by UV-grafted poly(acrylic acid) brushes, J. Appl. Polym. Sci., 123, 2266-2271 (2012).
J.G. Alauzun, S. Young, R. D'Souza, L. Liu, M.A. Brook and H.D. Sheardown, Biocompatible, hyaluronic acid modified silicone elastomers, Biomaterials, 31 3471-3478 (2010).
H. Chen, M.A. Brook, H.D. Sheardown, Y. Chen and B. Klenkler, Generic bioaffinity silicone surfaces, Bioconjugate Chem., 17, 21-28 (2006).
T.C. Ngo, R. Kalinova, D. Cossement, E. Hennebert, R. Mincheva, R. Snyders, P. Flammang, P. Dubois, R. Lazzaroni and P. Leclère, Modification of the adhesive properties of silicone based- coatings by block copolymers, Langmuir, DOI: 10.1021/la403995q.
A. Beaussart, T.C. Ngo, S. Derclaye, R. Kalinova, R. Mincheva, P. Dubois, P. Leclère and Y.F. Dufrêne, Chemical force microscopy of stimuli-responsive adhesive copolymers, Nanoscale, 6, 565-571 (2014).
M. Yao and J. Fang, Hydrophilic PEO-PDMS for microfluidic applications, J. Micromech. Microeng., 22, 025012 (2012)
B. Li, J. Chen and J.H. Wang, RGD peptide-conjugated poly(dimethylsiloxane) promotes adhesion, proliferation, and collagen secretion of human fibroblasts, J. Biomed. Mater. Res. A, 79, 989-998 (2006).
