[en] Tungsten carbide is widely used in the production of cutting tools and parts with very good
resistance to wear. It is well known that the properties of sintered carbides are closely related
to the carbide particles size. Tungsten carbide production is a laborious process, which always
includes a milling step. This article aims to study the manufacturing of tungsten carbide by
carburizing tungsten trioxide using mechanical alloying (MA) method, thus concentrating the
process in one step. Experimental tests were performed with a Fritch planetary mill and
complete conversion of tungsten trioxide in carbide was observed after 30 hours of milling.
The average value of D50 for the synthetized WC is 6.73 0.62 μm.
G.E. Spriggs History of fine grained hardmetal Int. J. Refactory Metals Hard Mater. 13 1995 241 255
K. Friedrichs, and K. Moertl Development of new types of carbides with ultrafine and even finer tungsten carbide powders Proceedings of Powder Metallurgy World Congress, Orlando, U.S.A. 2002
L. Garen-Munginstein, S. Berger, and A. Rosen Sintering of Nanocrystalline WC Powder, 14th Plansee Seminar 97, Plansee Proceedings, v.2, Cemented Carbides and Hard Materials 1997 622 633
T. Taniuchi, K. Okada, and T. Tanase Sintering Behavior of VC Doped Micrograined Cemented Carbides, 14th Plansee Seminar 97, Plansee Proceedings, v.2, Cemented Carbides and Hard Materials 1997 644 657
L. Prakash Applications of fine grained tungsten carbide based cemented carbides Int. J. Refract. Metals Hard Mater. 13 2005 257 264
R. Porat, S. Berger, and A. Rosen Synthesis and Processing of Nanocrystalline WC/Co Powders, 14th Plansee Seminar 97, Plansee Proceedings, v.2, Cemented Carbides and Hard Materials 1997 582 595
B. Zeiler The Potential of Conventional Tungsten Carbide Powder Manufacturing, 14th Plansee Seminar 97, Plansee Proceedings, v.4, Cemented Carbides and Hard Materials 1997 265 276
J.S. Benjamin Mechanical alloying - A perspective Metal. Powder Rep. 45 2 1990 122 127
C. Suryanarayana Mechanical alloying and milling Prog. Mater. Sci. 46 2001 1-184
S.G. Huang, R.L. Liu, L. Li, O. Van der Biest, and J. Vleugels NbC as grain growth inhibitor and carbide in WC-Co hardmetals Int. J. of Refractory Metals and Hard Materials 26 5 2008 389 395
M. Razavi, M. Reza Rahimipour, and R. Yazdani-Rad A novel technique for production of nano-crystalline mono tungsten carbide single phase via mechanical alloying J. Alloys Compd. 509 23 2011 6683 6688
S. Bolokang, C. Banganayi, and M. Phasha Effect of C and milling parameters on the synthesis of WC powders by mechanical alloying Int. J. Refract. Metals Hard Mater. 28 2 2010 211 216
M.H. Enayati, G.R. Aryanpour, and A. Ebnonnasir Production of nanostructured WC-Co powder by ball milling Int. J. Refract. Metals Hard Mater. 27 1 2009 159 163
M. Sherif El-Eskandarany, Amir A. Mahday, and H.A. Ahmed Synthesis and characterizations of ball-milled nanocrystalline WC and nanocomposite WC-Co powders and subsequent consolidations J. Alloys Compd. 312 1-2 2000 315 325
M. Yusoff, R. Othman, and Z. Hussain Mechanical alloying and sintering of nanostructured tungsten carbide-reinforced copper composite and its characterization Mater. Des. 32 6 2011 3293 3298
Q. Yuan, Y. Zheng, and H. Yu Synthesis of nanocrystalline Ti(C,N) powders by mechanical alloying and influence of alloying elements on the reaction Int. J. Refract. Metals Hard Mater. 27 1 2009 121 125
X. Li, H. Xin, K. Hu, and Y. Li Microstructure and properties of ultra-fine tungsten heavy alloys prepared by mechanical alloying and electric current activated sintering Trans. Nonferrous Metals Soc. China 20 3 2010 443 449
M. Abdellaoui, and E. Gaffet Mechanical alloying in a planetary ball mill: kinematic description J. de Physique IV Colloque C3, Suppl. au J. de Physique III 4 1994
M.A. Xueming, and J.I. Gang Nanostructured WC-Co alloy prepared by mechanical alloying J. Alloys Compd. 245 1-2 1996 L30 L32
S. Mi, and T.H. Courtney Synthesis of WC and WC-Co cermets by mechanical alloying and subsequent hot isostatic pressing Scr. Mater. 38 1 1997 171 176
S. Liu, Z.L. Huang, G. Liu, and G.B. Yang Preparing nano-crystalline rare earth doped WC/Co powder by high energy ball milling Int. J. of Refractory Metals and Hard Materials 24 6 2006 461 464
Z. Qiao, X. Ma, W. Zhao, H. Tang, and B. Zhao Nanostructured novel cemented hard alloy obtained by mechanical alloying and hot-pressing sintering and its applications J. Alloys Compd. 462 1-2 2008 416 420
C.J. Choi Preparation of ultrafine TiC-Ni cermet powders by mechanical alloying J. Mater. Process. Technol. 104 1-2 2000 127 132
Z. Qiao, X. Ma, W. Zhao, H. Tang, S. Cai, and B. Zhao Fabrication, microstructure and mechanical properties of novel cemented hard alloy obtained by mechanical alloying and hot-pressing sintering Mater. Sci. Eng. 460-461 2007 46 49
National Institute of Standards and Technology, http://www.nist.gov/, may 2014.
F. Grønvold, S. Stølen, E.F. Westrum Jr., A.K. Labban, and B. Uhrenius Heat capacity and thermodynamic properties of ditungsten carbide Thermochim. Acta 129 1988 115 125