Mode-division and spatial-division optical fiber sensors

Caucheteur, Christophe; Villatoro, Joel; Fu, Liu; Loyez, Médéric; Guo, Tuan; Albert, Jacques

Download

Article (Scientific journals)

Mode-division and spatial-division optical fiber sensors

Caucheteur, Christophe; Villatoro, Joel; Fu, Liu et al.

2022 • In Advances in Optics and Photonics

Peer reviewed

Permalink
https://hdl.handle.net/20.500.12907/42573

Files (1)Send to Details Statistics Bibliography Similar publications

Files

Full Text

AOP-2022_Paper.pdf

Publisher postprint (30.86 MB)

Download

All documents in ORBi UMONS are protected by a user license.

Send to

RIS BibTex APA Chicago Permalink X Linkedin

Details

Abstract :

[en] The aim of this paper is to provide a comprehensive review of mode-division and spatial-division optical fiber sensors, mainly encompassing interferometers and advanced fiber gratings. Compared with their single-mode counterparts, which have a very mature field with many highly successful commercial applications, multimodal configurations have developed more recently with advances in fiber device fabrication and novel mode control devices. Multimodal fiber sensors considerably widen the range of possible sensing modalities and provide opportunities for increased accuracy and performance in conventional fiber sensing applications. Recent progress in these areas is attested by sharp increases in the number of publications and a rise in technology readiness level. In this paper, we first review the fundamental operating principles of such multimodal optical fiber sensors. We then report on the theoretical formalism and simulation procedures that allow for the prediction of the spectral changes and sensing response of these sensors. Finally, we discuss some recent cutting-edge applications, mainly in the physical and (bio)chemical fields. This paper provides both a step-by-step guide relevant for non-specialists entering in the field and a comprehensive review of advanced techniques for more skilled practitioners.

Disciplines :

Biochemistry, biophysics & molecular biology
Physics

Author, co-author :

Caucheteur, Christophe ; Université de Mons > Faculté Polytechnique > Service d'Electromagnétisme et Télécommunications

Villatoro, Joel

Fu, Liu

Loyez, Médéric ; Université de Mons > Faculté des Sciences > Service de Protéomie et Microbiologie

Guo, Tuan

Albert, Jacques

Language :

English

Title :

Mode-division and spatial-division optical fiber sensors

Publication date :

31 March 2022

Journal title :

Advances in Optics and Photonics

ISSN :

1943-8206

Publisher :

The Optical Society, United States

Peer reviewed :

Peer reviewed

Research unit :

Protéomie et Microbiologie
Electromagnétisme et Télécommunications

Research institute :

Institut des Biosciences

Available on ORBi UMONS :

since 14 April 2022

Statistics

Number of views

52 (1 by UMONS)

Number of downloads

55 (0 by UMONS)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

Bibliography

D. A. Krohn, T. W. MacDougal, and A. Mendez, Fiber Optic Sensors: Fundamentals and Applications, 4th ed. (SPIE Digital Library, 2015).
I. Del Villar and I. R. Matias, Optical Fibre sensors: Fundamentals for Development of Optimized Devices (Wiley-IEEE Press, 2020).
Z. He and Q. Liu, “Optical fiber distributed acoustic sensors: a review,” J. Lightwave Technol. 39 , 3671–3686 (2021).
P. Lu, N. Lalam, M. Badar, B. Liu, B. T. Chorpening, M. P. Buric, and P. R. Ohodnicki, “Distributed optical fiber sensing: review and perspective,” Appl. Phys. Rev. 6, 041302 (2019).
I. Ashry, Y. Mao, A. Trichili, B. Wang, T. K. Ng, M.-S. Alouini, and B. S. Ooi, “A review of using few-mode fibers for optical sensing,” IEEE Access 8, 179592–179605 (2020).
S. Pevec and D. Donlagić, “Multiparameter fiber-optic sensors: a review,” Opt. Eng. 58 , 072009 (2019).
A. Urrutia, I. Del Villar, P. Zubiate, and C. R. Zamarreño, “A comprehensive review of optical fiber refractometers: toward a standard comparative criterion,” Laser Photonics Rev. 13 , 1900094 (2019).
C. Caucheteur, T. Guo, and J. Albert, “Review of plasmonic fiber optic biochemical sensors: improving the limit of detection,” Anal. Bioanal. Chem. 407, 3883–3897 (2015).
X. D. Wang and O. S. Wolfbeis, “Fiber-optic chemical sensors and biosensors (2015-2019),” Anal. Chem. 92, 397–430 (2020).
L. Wang and S. LaRochelle, “Design of eight-mode polarization-maintaining few-mode fiber for multiple-input multiple-output-free spatial division multiplexing,” Opt. Lett. 40, 5846–5849 (2015).
E. S. Manuylovich, V. V. Dvoyrin, and S. K. Turitsyn, “Fast mode decomposition in few-mode fibers,” Nat. Commun. 11, 5507 (2020).
M. K. Annuar Zaini, Y.-S. Lee, K.-S. Lim, N. A. Mohd Nazal, M. H. Zohari, and H. Ahmad, “Axial stress profiling for few-mode fiber Bragg grating based on resonant wavelength shifts during etching process,” J. Opt. Soc. Am. B 34 , 1894–1898 (2017).
F. Y. Chan, G. Mudhana, and P. Shum, “Comparison of bandwidth and sensitivity of long-period gratings in single-mode and few-mode fibers,” Appl. Opt. 54, 6558–6565 (2015).
X. Gao, T. Ning, C. Zhang, J. Xu, J. Zheng, H. Lin, J. Li, L. Pei, and H. You, “A dual-parameter fiber sensor based on few-mode fiber and fiber Bragg grating for strain and temperature sensing,” Opt. Commun. 454, 124441 (2020).
L. Grüner-Nielsen, N. M. Mathew, and K. Rottwitt, “Characterization of few mode fibers and devices,” Opt. Fiber Technol. 52, 101972 (2019).
S. A. Jacobs, “Failure of the weakly guiding approximation for few-mode fiber index profiles,” J. Lightwave Technol. 37, 5076–5082 (2019).
W. Jin, Y. Xu, Y. Jiang, Y. Wu, S. Yao, S. Xiao, Y. Qi, W. Ren, and S. Jian, “Strain and temperature characteristics of the LP11 mode based on a few-mode fiber Bragg grating and core-offset splicing,” Laser Phys. 28 , 025103 (2018).
X. Liang, Y. Li, Z. Geng, and Z. Liu, “Selective transverse mode operation of a fiber laser based on few-mode FBG for rotation sensing,” Opt. Express 27, 37964–37974 (2019).
Z. Luo, H. Yu, Y. Zheng, Z. Zheng, Y. Li, and X. Jiang, “Selective mode excitation in a few-mode photonic crystal fiber for strain sensing with restrained temperature response,” J. Lightwave Technol. 38, 4560–4571 (2020).
C. Wang, C. Pan, J. Xu, Z. Yang, J. Zhao, and Z. Huang, “Analysis of misalignment, twist, and bend in few-mode fibers using spatially and spectrally resolved imaging,” Opt. Fiber Technol. 56, 102205 (2020).
Y. Xu, G. Ren, Y. Jiang, Y. Gao, H. Li, W. Jin, Y. Wu, Y. Shen, and S. Jian, “Bending effect characterization of individual higher-order modes in few-mode fibers,” Opt. Lett. 42, 3343–3346 (2017).
M. Yang, J. Yang, C. Guan, M. Wang, P. Geng, Y. Shen, J. Zhang, J. Shi, J. Yang, and L. Yuan, “Refractive index sensor based on etched eccentric core few-mode fiber dual-mode interferometer,” Opt. Express 27, 28104–28113 (2019).
J. Zhao, J. Xu, C. Wang, Y. Liu, and Z. Yang, “Experimental demonstration of multi-parameter sensing based on polarized interference of polarization-maintaining few-mode fibers,” Opt. Express 28, 20372–20378 (2020).
Y. Zhao, C. Wang, G. Yin, B. Jiang, K. Zhou, C. Mou, Y. Liu, L. Zhang, and T. Wang, “Simultaneous directional curvature and temperature sensor based on a tilted few-mode fiber Bragg grating,” Appl. Opt. 57, 1671–1678 (2018).
M. C. Alonso-Murias, D. Monzon-Hernandez, O. Rodriguez-Quiroz, J. E. Antonio-Lopez, A. Schulzgen, R. Amezcua-Correa, and J. Villatoro, “Long-range multicore optical fiber displacement sensor,” Opt. Lett. 46, 2224–2227 (2021).
J. Amorebieta, A. Ortega-Gomez, G. Durana, R. Fernandez, E. Antonio-Lopez, A. Schulzgen, J. Zubia, R. Amezcua-Correa, and J. Villatoro, “Compact omnidirectional multicore fiber-based vector bending sensor,” Sci. Rep. 11, 5989 (2021).
B. J. Ávila, J. N. Hernández, S. M. Toxqui Rodríguez, and B. M. Rodríguez-Lara, “Symmetric supermodes in cyclic multicore fibers,” OSA Continuum 2 , 515–522 (2019).
D. Barrera, J. Madrigal, and S. Sales, “Tilted fiber Bragg gratings in multicore optical fibers for optical sensing,” Opt. Lett. 42, 1460–1463 (2017).
D. Barrera, J. Madrigal, and S. Sales, “Long period gratings in multicore optical fibers for directional curvature sensor implementation,” J. Lightwave Technol. 36, 1063–1068 (2018).
M. Becker, A. Lorenz, T. Elsmann, I. Latka, A. Schwuchow, S. Dochow, R. Spittel, J. Kobelke, J. Bierlich, K. Schuster, M. Rothhardt, and H. Bartelt, “Single-mode multicore fibers with integrated Bragg filters,” J. Lightwave Technol. 34, 4572–4578 (2016).
D. Budnicki, D. Budnicki, I. Parola, Ł Szostkiewicz, K. Markiewicz, Z. Hołdyński, G. Wojcik, M. Makara, K. Poturaj, M. Kuklińska, P. Mergo, M. Napierała, and T. Nasiłowski, “All-fiber vector bending sensor based on a multicore fiber with asymmetric air-hole structure,” J. Lightwave Technol. 38, 6685–6690 (2020).
G. Capilla-Gonzalez, D. A. May-Arrioja, D. Lopez-Cortes, and J. R. Guzman-Sepulveda, “Stress homogenization effect in multicore fiber optic bending sensors,” Appl. Opt. 56, 2273–2279 (2017).
J. Cui, H. Luo, J. Lu, X. Cheng, and H. Y. Tam, “Random forest assisted vector displacement sensor based on a multicore fiber,” Opt. Express 29, 15852–15864 (2021).
A. Fender, W. N. MacPherson, R. R. J. Maier, J. S. Barton, D. S. George, R. I. Howden, G. W. Smith, B. J. S. Jones, S. McCulloch, X. Chen, R. Suo, L. Zhang, and I. Bennion, “Two-axis temperature-insensitive accelerometer based on multicore fiber Bragg gratings,” IEEE Sens. J 8, 1292–1298 (2008).
L. Gan, R. Wang, D. Liu, L. Duan, S. Liu, S. Fu, B. Li, Z. Feng, H. Wei, W. Tong, P. Shum, and M. Tang, “Spatial-division multiplexed Mach–Zehnder interferometers in heterogeneous multicore fiber for multiparameter measurement,” IEEE Photonics J. 8, 1–8 (2016).
T. A. Goebel, J. Nold, C. Hupel, S. Kuhn, N. Haarlammert, T. Schreiber, C. Matzdorf, T. O. Imogore, R. G. Krämer, D. Richter, A. Tünnermann, and S. Nolte, “Ultrashort pulse written fiber Bragg gratings as narrowband filters in multicore fibers,” Appl. Opt. 60 , 43–51 (2021).
S. Guvenc Kilic, Y. Zhu, Q. Sheng, M. Naci Inci, and M. Han, “Refractometer with etched chirped fiber Bragg grating Fabry–Perot interferometer in multicore fiber,” IEEE Photonics Technol. Lett. 31, 575–578 (2019).
W. Hu, C. Li, S. Cheng, F. Mumtaz, C. Du, and M. Yang, “Etched multicore fiber Bragg gratings for refractive index sensing with temperature in-line compensation,” OSA Continuum 3 , 1058–1067 (2020).
P. Li, P. Tian, C. Guan, Z. Zhu, Y. Li, J. Yang, J. Shi, and L. Yuan, “Heterogeneous double period array multicore fiber and its application in Bragg grating sensor,” IEEE Sens. J. 19, 6193–6196 (2019).
Y. Liu, A. Zhou, and L. Yuan, “Gelatin-coated Michelson interferometric humidity sensor based on a multicore fiber with helical structure,” J. Lightwave Technol. 37, 2452–2457 (2019).
J. Madrigal, D. Barrera, and S. Sales, “Refractive index and temperature sensing using inter-core crosstalk in multicore fibers,” J. Lightwave Technol. 37, 4703–4709 (2019).
D. A. May-Arrioja and J. R. Guzman-Sepulveda, “Highly sensitive fiber optic refractive index sensor using multicore coupled structures,” J. Lightwave Technol. 35, 2695–2701 (2017).
F. Mumtaz, P. Cheng, C. Li, S. Cheng, C. Du, M. Yang, Y. Dai, and W. Hu, “A design of taper-like etched multicore fiber refractive index-insensitive a temperature highly sensitive Mach-Zehnder interferometer,” IEEE Sens. J. 20, 7074–7081 (2020).
A. V. Newkirk, J. E. Antonio-Lopez, A. Velazquez-Benitez, J. Albert, R. Amezcua-Correa, and A. Schulzgen, “Bending sensor combining multicore fiber with a mode-selective photonic lantern,” Opt. Lett. 40, 5188–5191 (2015).
D. Paloschi, K. A. Bronnikov, S. Korganbayev, A. A. Wolf, A. Dostovalov, and P. Saccomandi, “3D shape sensing with multicore optical fibers: transformation matrices versus Frenet-Serret equations for real-time application,” IEEE Sens. J. 21, 4599–4609 (2021).
T. Sakamoto, T. Mori, M. Wada, T. Yamamoto, F. Yamamoto, and K. Nakajima, “Fiber twisting- and bending-induced adiabatic/nonadiabatic super-mode transition in coupled multicore fiber,” J. Lightwave Technol. 34, 1228–1237 (2016).
A. Van Newkirk, J. E. Antonio-Lopez, G. Salceda-Delgado, M. U. Piracha, R. Amezcua-Correa, and A. Schulzgen, “Multicore fiber sensors for simultaneous measurement of force and temperature,” IEEE Photonics Technol. Lett. 27, 1523–1526 (2015).
J. Villatoro, E. Antonio-Lopez, A. Schulzgen, and R. Amezcua-Correa, “Miniature multicore optical fiber vibration sensor,” Opt. Lett. 42, 2022–2025 (2017).
R. Wang, M. Tang, S. Fu, Z. Feng, W. Tong, and D. Liu, “Spatially arrayed long period gratings in multicore fiber by programmable electrical arc discharge,” IEEE Photonics J. 9, 4500310 (2017).
P. S. Westbrook, T. Kremp, K. S. Feder, W. Ko, E. M. Monberg, H. Wu, D. A. Simoff, T. F. Taunay, and R. M. Ortiz, “Continuous multicore optical fiber grating arrays for distributed sensing applications,” J. Lightwave Technol. 35, 1248–1252 (2017).
S. Xiang, H. Xiongwei, Y. Luyun, D. Nengli, W. Jianjun, Z. Fangfang, P. Jingang, L. Haiqing, and L. Jinyan, “Helical long-period grating manufactured with a CO2 laser on multicore fiber,” Opt. Express 25, 10405–10412 (2017).
M. S. Yoon, S. B. Lee, and Y. G. Han, “In-line interferometer based on intermodal coupling of a multicore fiber,” Opt. Express 23, 18316–18322 (2015).
Z. Zhao, Z. Liu, M. Tang, S. Fu, L. Wang, N. Guo, C. Jin, H. Y. Tam, and C. Lu, “Robust in-fiber spatial interferometer using multicore fiber for vibration detection,” Opt. Express 26, 29629–29637 (2018).
D. Zheng, J. Madrigal, D. Barrera, S. Sales, and J. Capmany, “Microwave photonic filtering for interrogating FBG-based multicore fiber curvature sensor,” IEEE Photonics Technol. Lett. 29, 1707–1710 (2017).
R. Zhou, F. Chen, S. Li, R. Wang, and X. Qiao, “Three-dimensional vector accelerometer using a multicore fiber inscribed with three FBGs,” J. Lightwave Technol. 39, 3244–3250 (2021).
C. Tsao, Optical Fibre Waveguide Analysis (Oxford, 1992).
C.L. Chen, Foundations for Guided-Wave Optics (Wiley, 2007).
K. Okamoto, Fundamentals of Optical Waveguides, 2nd ed., (Academic Press, 2006).
A. W. Snyder and J. Love, Optical waveguide theory (Springer Science & Business Media, 2012).
W. Zhou, Y. Zhou, and J. Albert, “A true fiber optic refractometer,” Laser Photonics Rev. 11, 1600157 (2017).
C. Chen, P. Berini, D. Feng, S. Tanev, and V. Tzolov, “Efficient and accurate numerical analysis of multilayer planar optical waveguides in lossy anisotropic media,” Opt. Express 7, 260–272 (2000).
E. Anemogiannis and E. N. Glytsis, “Multilayer waveguides: efficient numerical analysis of general structures,” J. Lightwave Technol. 10, 1344–1351 (1992).
A. V. Lavrinenko, J. Laegsgaard, N. Gregersen, F. Schmidt, and T. Søndergaard, Numerical Methods in Photonics (CRC Press, 2017).
F. L. Teixeira and W. C. Chew, “PML-FDTD in cylindrical and spherical grids,” IEEE Microw. and Guided Waves Lett. 7 , 285–287 (1997).
Y.-C. Lu, L. Yang, W.-P. Huang, and S.-S. Jian, “Improved full-vector finite-difference complex mode solver for optical waveguides of circular symmetry,” J. Lightwave Technol. 26(13), 1868–1876 (2008).
Z. Zhu and T. G. Brown, “Full-vectorial finite-difference analysis of microstructured optical fibers,” Opt. Express 10, 853–864 (2002).
J. D. Joannopoulos, S. G. Johnson, J. N. Winn, and R. D. Meade, Photonic Crystals: Molding the Flow of Light, 2nd ed., Chap. 9 (Princeton U. Press, 2008) ISBN:9780691124568
I. Del Villar, F. J. Arregui, C. R. Zamarreño, J. M. Corres, C. Bariain, J. Goicoechea, C. Elosua, M. Hernaez, P. J. Rivero, A. B. Socorro, A. Urrutia, P. Sanchez, P. Zubiate, D. Lopez, N. De Acha, J. Ascorbe, and I. R. Matias, “Optical sensors based on lossy-mode resonances,” Sens. Actuators, B 240, 174–185 (2017).
Z. Li and H. Zhu, “Fiber-optic surface waveguide modes excited by inter/intra mode transition for refractometric sensitivity enhancement,” IEEE J. Sel. Top. Quantum Electron. 27, 5600308 (2021).
F. Liu, X. Zhang, T. Guo, and J. Albert, “Optical detection of the percolation threshold of nanoscale silver coatings with optical fiber gratings,” APL Photonics 5, 076101 (2020).
W. Zhou, D. J. Mandia, M. B. E. Griffiths, S. T. Barry, and J. Albert, “Effective permittivity of ultrathin chemical vapor deposited gold films on optical fibers at infrared wavelengths,” J. Phys. Chem. C 118, 670–678 (2014).
W. Zhou, D. J. Mandia, S. T. Barry, and J. Albert, “Anisotropic effective permittivity of an ultrathin gold coating on optical fiber in air, water and saline solutions,” Opt. Express 22, 31665–31676 (2014).
U. Kreibig and M. Vollmer, Optical Properties of Metal clusters, Vol. 25 of Springer Series in Materials Science (Springer, 1995)
J. U. Thomas, N. Jovanovic, R. G. Becker, G. D. Marshall, M. J. Withford, A. Tünnermann, S. Nolte, and M. J. Steel, “Cladding mode coupling in highly localized fiber Bragg gratings: modal properties and transmission spectra,” Opt. Express 19 , 325–341 (2011).
J. U. Thomas, N. Jovanovic, R. G. Krämer, G. D. Marshall, S. Nolte, and M. J. Steel, “Cladding mode coupling in highly localized fiber Bragg gratings II: complete vectorial analysis,” Opt. Express 20 , 21434–21449 (2012).
F. Shen and T. Zhang, “Numerical analyses of the polarization dependent cladding mode coupling in localized fiber Bragg gratings,” IEEE Access 9, 6689–6695 (2021).
Z. Yan, H. Wang, C. Wang, Z. Sun, G. Yin, K. Zhou, Y. Wang, W. Zhao, and L. Zhang, “Theoretical and experimental analysis of excessively tilted fiber gratings,” Opt. Express 24, 12107–12115 (2016).
J. Albert, L.-Y. Shao, and C. Caucheteur, “Tilted fiber Bragg grating sensors,” Laser Photonics Rev. 7, 83–108 (2013).
M. Z. Alam and J. Albert, “Selective excitation of radially and azimuthally polarized optical fiber cladding modes,” J. Lightwave Technol. 31, 3167–3175 (2013).
J. Bucaro and E. Carome, “Single fiber interferometric acoustic sensor,” Appl. Opt. 17, 330–331 (1978).
B. Y. Kim, J. N. Blake, S.-Y. Huang, and H. J. Shaw, “Use of highly elliptical core fibers for two-mode fiber devices,” Opt. Lett. 12, 729–731 (1987).
G. Salceda-Delgado, D. Monzon-Hernandez, A. Martinez-Rios, G. A. Cardenas-Sevilla, and J. Villatoro, “Optical microfiber mode interferometer for temperature-independent refractometric sensing,” Opt. Lett. 37, 1974–1976 (2012).
H. Luo, Q. Sun, X. Li, Z. Yan, Y. Li, D. Liu, and L. Zhang, “Refractive index sensitivity characteristics near the dispersion turning point of the multimode microfiber-based Mach-Zehnder interferometer,” Opt. Lett. 40, 5042–5045 (2015).
I. Hernández-Romano, D. Monzón-Hernández, C. Moreno-Hernández, D. Moreno-Hernandez, and J. Villatoro, “Highly sensitive temperature sensor based on a polymer-coated microfiber interferometer,” IEEE Photonics Techn. Lett. 27, 2591–2594 (2015).
M. Arjmand, H. Saghafifar, M. Alijanianzadeh, and M. Soltanolkotabi, “A sensitive tapered-fiber optic biosensor for the label-free detection of organophosphate pesticides,” Sens. Actuators B 249, 523–532 (2017).
A. D. D. Le, J. Hwang, M. Yusuf, K. H. Park, S. Park, and J. Kim, “Simultaneous measurement of humidity and temperature with CYTOP-reduced graphene oxide-overlaid two-mode optical fiber sensor,” Sens. Actuators B 298, 126841 (2019).
Y. Li, H. Ma, L. Gan, Q. Liu, Z. Yan, D. Liu, and Q. Sun, “Immobilized optical fiber microprobe for selective and high sensitive glucose detection,” Sens. Actuators B 255, 3004–3010 (2018).
D. Sun, S. Xu, Y. Fu, and J. Ma, “Fast response microfiber-optic pH sensor based on a polyaniline sensing layer,” Appl. Opt. 59, 11261–11265 (2020).
P. Wang, H. Zhao, X. Wang, G. Farrell, and G. Brambilla, “A review of multimode interference in tapered optical fibers and related applications,” Sensors 18, 858 (2018).
S. Korposh, S. W. James, S.-W. Lee, and R. P. Tatam, “Tapered optical fibre sensors: current trends and future perspectives,” Sensors 19, 2294 (2019).
P. R. Horche, M. López-Amo, M. A. Muriel, and J. A. Martin-Pereda, “Spectral behavior of a low-cost all-fiber component based on untapered multifiber unions,” IEEE Photonics Technol. Lett. 1, 184–187 (1989).
A. Kumar, R. K. Varshney, and P. Sharma, “Transmission characteristics of SMS fiber optic sensor structures,” Opt. Commun. 219, 215–219 (2003).
Y. Jung, S. Kim, D. Lee, and K. Oh, “Compact three segmented multimode fibre modal interferometer for high sensitivity refractive-index measurement,” Meas. Sci. Technol. 17, 1129 (2006).
Q. Wang, G. Farrell, and W. Yan, “Investigation on single-mode–multimode–singlemode fiber structure,” J. Lightwave Technol. 26, 512–519 (2008).
P. Wang, G. Brambilla, M. Ding, Y. Semenova, Q. Wu, and G. Farrell, “Investigation of single-mode–multimode–single-mode and single-mode–tapered-multimode–single-mode fiber structures and their application for refractive index sensing,” J. Opt. Soc. Am. B 28, 1180–1186 (2011).
J. Antonio-Lopez, D. May-Arrioja, and P. LiKamWa, “Optofluidic tuning of multimode interference fiber filters,” in Enabling Photonics Technologies for Defense, Security, and Aerospace Applications V (SPIE, 2009), p. 73390D .
Y. Zhao, J. Zhao, and Q. Zhao, “Review of no-core optical fiber sensor and applications,” Sens. Actuators, A 313, 112160 (2020).
K. Wang, X. Dong, M. H. Köhler, P. Kienle, Q. Bian, M. Jakobi, and A. W. Koch, “Advances in optical fiber sensors based on multimode interference (MMI): a review,” IEEE Sens. J. 21, 132–142 (2020).
Q. Wu, Y. Qu, J. Liu, J. Yuan, S.-P. Wan, T. Wu, X.-D. He, B. Liub, D. Liuc, and Y. Ma, “Singlemode-multimode-singlemode fiber structures for sensing applications – a review,” IEEE Sens. J. 21 , 12734–12751 (2021).
J. R. Guzmán-Sepúlveda, R. Guzmán-Cabrera, and A. A. Castillo-Guzmán, “Optical sensing using fiber-optic multimode interference devices: a review of nonconventional sensing schemes,” Sensors 21, 1862 (2021).
R. X. Gao, Q. Wang, F. Zhao, B. Meng, and S. L. Qu, “Optimal design and fabrication of SMS fiber temperature sensor for liquid,” Opt. Commun. 283, 3149–3152 (2010).
A. M. Hatta, Y. Semenova, G. Rajan, P. Wang, J. Zheng, and G. Farrell, “Analysis of temperature dependence for a ratiometric wavelength measurement system using SMS fiber structure based edge filters,” Opt. Commun. 283, 1291–1295 (2010).
Q. Wu, Y. Semenova, A. M. Hatta, P. Wang, and G. Farrell, “Bent SMS fibre structure for temperature measurement,” Electron. Lett. 46, 1129–1130 (2010).
A. M. Hatta, K. Indriawati, T. Bestariyan, T. Humada, and Sekartedjo, “SMS fiber structure for temperature measurement using an OTDR,” Photonic Sens. 3, 262–266 (2013).
Y. Zhang, X. Tian, L. Xue, Q. Zhang, L. Yang, and B. Zhu, “Super-high sensitivity of fiber temperature sensor based on leaky-mode bent SMS structure,” IEEE Photonics Technol. Lett. 25, 560–563 (2013).
M. Kumar, A. Kumar, and S. M. Tripathi, “A comparison of temperature sensing characteristics of SMS structures using step and graded index multimode fibers,” Opt. Commun. 312, 222–226 (2014).
X. Q. Lei, Y. T. Yu, W. J. Feng, B. J. Peng, and X. D. Li, “A novel fiber temperature sensor with liquid-crystal filled SM-NC-SM structure,” J. Optoelectron. Laser 26, 2278–2282 (2015).
Q. Wu, M. Yang, J. Yuan, H. P. Chan, Y. Ma, Y. Semenova, P. Wang, C. Yu, and G. Farrell, “The use of a bend singlemode-multimode-singlemode (SMS) fibre structure for vibration sensing,” Opt. Laser Technol. 63, 29–33 (2014).
J. W. Costa, M. A. R. Franco, V. A. Serrão, C. M. B. Cordeiro, and M. T. R. Giraldi, “Macrobending SMS fiber-optic anemometer and flow sensor,” Opt. Fiber Technol. 52, 101981 (2019).
Z. Shuo, D. Sifan, W. Zemin, S. Cuiting, C. Xudong, M. Yiwei, Z. Lei, L. Chunlian, G. Tao, Y. Wenlei, and Y. Libo, “A miniature SMS-LPG bending sensor with high sensitivity based on multimode fiber embedded-LPG,” Sens. Actuators, A 295, 31–36 (2019).
A. M. Hatta, H. E. Permana, H. Setijono, A. Kusumawardhani, and Sekartedjo, “Strain measurement based on SMS fiber structure sensor and OTDR,” Microw. Opt. Technol. Lett. 55, 2576–2578 (2013).
Y. Sun, D. Liu, P. Lu, Q. Sun, W. Yang, S. Wang, L. Liu, and W. Ni, “High sensitivity optical fiber strain sensor using twisted multimode fiber based on SMS structure,” Opt. Commun. 405, 416–420 (2017).
K. Saitoh and S. Matsuo, “Multicore fiber technology,” J. Lightwave Technol. 34, 55–66 (2016).
J. P. Moore and M. D. Rogge, “Shape sensing using multi-core fiber optic cable and parametric curve solutions,” Opt. Express 20, 2967–2973 (2012).
I. Floris, J. M. Adam, P. A. Calderón, and S. Sales, “Fiber optic shape sensors: a comprehensive review,” Opt. Lasers Eng. 139, 106508 (2021).
A. Azmi, A. Abdullah, M. M. Noor, M. Ibrahim, R. R. Ibrahim, T. Tan, and J. Zhang, “Dynamic bending and rotation sensing based on high coherence interferometry in multicore fiber,” Opt. Laser Technol. 135, 106716 (2021).
Z. Zhao, L. Shen, Y. Dang, C. Lu, and M. Tang, “Enabling long range distributed vibration sensing using multicore fiber interferometers,” Opt. Lett. 46, 3685–3688 (2021).
D. Yan, Z. Tian, N.-K. Chen, L. Zhang, Y. Yao, Y. Xie, P. P. Shum, K. T. Grattan, and D. Wang, “Observation of split evanescent field distributions in tapered multicore fibers for multiline nanoparticle trapping and microsensing,” Opt. Express 29, 9532–9543 (2021).
W. Chen, Y. Zhang, H. Yang, Y. Qiu, H. Li, Z. Chen, and C. Yu, “Non-invasive measurement of vital signs based on seven-core fiber interferometer,” IEEE Sens. J. 21, 10703–10710 (2021).
Z. Li, Y.-X. Zhang, W.-G. Zhang, L.-X. Kong, Y. Yue, and T.-Y. Yan, “Parallelized fiber Michelson interferometers with advanced curvature sensitivity plus abated temperature crosstalk,” Opt. Lett. 45, 4996–4999 (2020).
D. Guo, L. Wu, H. Yu, A. Zhou, Q. Li, F. Mumtaz, C. Du, and W. Hu, “Tapered multicore fiber interferometer for refractive index sensing with graphene enhancement,” Appl. Opt. 59, 3927–3932 (2020).
Y. Chunxia, D. Hui, D. Wei, and X. Chaowei, “Weakly-coupled multicore optical fiber taper-based high-temperature sensor,” Sens. Actuators A 280, 139–144 (2018).
C. Zhang, T. Ning, J. Li, L. Pei, C. Li, and H. Lin, “Refractive index sensor based on tapered multicore fiber,” Opt. Fiber Technol. 33, 71–76 (2017).
R. Zhou, X. Qiao, R. Wang, F. Chen, and W. Ma, “An optical fiber sensor based on lateral-offset spliced seven-core fiber for bending and stretching strain measurement,” IEEE Sens. J. 20, 5915–5920 (2020).
C. Zhang, T. Ning, J. Zheng, X. Gao, H. Lin, J. Li, L. Pei, and X. Wen, “Miniature optical fiber temperature sensor based on FMF-SCF structure,” Opt. Fiber Technol. 41, 217–221 (2018).
T. A. Birks, I. Gris-Sanchez, S. Yerolatsitis, S. G. Leon-Saval, and R. R. Thomsons, “The photonic lantern,” Adv. Opt. Photon. 7, 107–167 (2015).
S. Lacroix, F. Gonthier, and J. Bures, “Modeling of symmetric 2 × 2 fused-fiber couplers,” Appl. Opt. 33, 8361–8369 (1994).
A. Radosavljević, A. Daničić, J. Petrovic, A. Maluckov, and L. Hadžievski, “Coherent light propagation through multicore optical fibers with linearly coupled cores,” J. Opt. Soc. Am. B 32 , 2520–2527 (2015).
W. Ren, Z. Tan, and G. Ren, “Analytical formulation of supermodes in multicore fibers with hexagonally distributed cores,” IEEE Photon. J. 7, 7100311 (2015).
J. E. Antonio-Lopez, Z. S. Eznaveh, P. LiKamWa, A. Schülzgen, and R. Amezcua-Correa, “Multicore fiber sensor for high-temperature applications up to 1000 °C,” Opt. Lett. 39, 4309–4312 (2014).
J. A. Flores-Bravo, R. Fernández, E. A. Lopez, A. Schülzgen, A. Amezcua-Correa, and J. Villatoro, “Simultaneous sensing of refractive index and temperature with supermode interference,” J. Lightwave Technol. 39, 7351–7357 (2021)
J. Amorebieta, G. Durana, A. Ortega-Gomez, R. Fernández, J. Velasco, I. S. de Ocáriz, J. Zubia, J. E. Antonio-López, A. Schülzgen, and R. Amezcua-Correa, “Packaged multi-core fiber interferometer for high-temperature sensing,” J. Lightwave Technol. 37, 2328–2334 (2019).
J. Villatoro, A. Van Newkirk, E. Antonio-Lopez, J. Zubia, A. Schülzgen, and R. Amezcua-Correa, “Ultrasensitive vector bending sensor based on multicore optical fiber,” Opt. Lett. 41, 832–835 (2016).
J. Amorebieta, A. Ortega-Gomez, G. Durana, R. Fernández, E. Antonio-Lopez, A. Schülzgen, J. Zubia, R. Amezcua-Correa, and J. Villatoro, “Highly sensitive multicore fiber accelerometer for low frequency vibration sensing,” Sci. Rep. 10, 1–11 (2020).
N. Cuando-Espitia, M. A. Fuentes-Fuentes, D. A. May-Arrioja, I. Hernández-Romano, R. Martínez-Manuel, and M. Torres-Cisneros, “Dual-point refractive index measurements using coupled seven-core fibers,” J. Lightwave Technol. 39, 310–319 (2021).
Y. Geng, X. Li, X. Tan, Y. Deng, and Y. Yu, “In-line flat-top comb filter based on a cascaded all-solid photonic bandgap fiber intermodal interferometer,” Opt. Express 21, 17352–17358 (2013).
S. Dong, B. Dong, C. Yu, and Y. Guo, “High sensitivity optical fiber curvature sensor based on cascaded fiber interferometer,” J. Lightwave Technol. 36, 1125–1130 (2017).
T. Claes, W. Bogaerts, and P. Bienstman, “Experimental characterization of a silicon photonic biosensor consisting of two cascaded ring resonators based on the Vernier-effect and introduction of a curve fitting method for an improved detection limit,” Opt. Express 18 , 22747–22761 (2010).
F. Wei, D. Liu, Z. Wang, Z. Wang, G. Farrell, Q. Wu, G.-D. Peng, and Y. Semenova, “Enhancing the visibility of Vernier effect in a tri-microfiber coupler fiber loop interferometer for ultrasensitive refractive index and temperature sensing,” J. LightwaveTechnol. 39, 1523–1529 (2021).
J. Villatoro, “Phase-shifted modal interferometers for high-accuracy optical fiber sensing,” Opt. Lett. 45, 21–24 (2020).
J. Villatoro, J. Amorebieta, A. Ortega-Gomez, E. Antonio-Lopez, J. Zubia, A. Schülzgen, and R. Amezcua-Correa, “Composed multicore fiber structure for direction-sensitive curvature monitoring,” APL Photonics 5, 070801 (2020).
I. Del Villar, C. R. Zamarreno, M. Hernaez, F. J. Arregui, and I. R. Matias, “Lossy mode resonance generation with indium-tin-oxide-coated optical fibers for sensing applications,” J. Lightwave Technol. 28, 111–117 (2010).
E. I. Golant, A. B. Pashkovskii, and K. M. Golant, “Lossy mode resonance in an etched-out optical fiber taper covered by a thin ITO layer,” Appl. Opt. 59, 9254–9258 (2020).
F. Chiavaioli and D. Janner, “Fiber optic sensing with lossy mode resonances: applications and perspectives,” J. Lightwave Technol. 39 , 3855–3870 (2021).
F. Esposito, L. Sansone, A. Srivastava, F. Baldini, S. Campopiano, F. Chiavaioli, M. Giordano, A. Giannetti, and A. Iadicicco, “Long period grating in double cladding fiber coated with graphene oxide as high-performance optical platform for biosensing,” Biosens. Bioelectron. 172, 112747 (2021).
D. Villar, C. R. Zamarreño, P. Sanchez, M. Hernaez, C. F. Valdivielso, F. J. Arregui, and I. R. Matias, “Generation of lossy mode resonances by deposition of high-refractive-index coatings on uncladded multimode optical fibers,” J. Opt. 12, 095503 (2010).
A. Yariv and P. Yeh, Photonics: Optical Electronics in Modern Communications, 6th ed., (Oxford U. Press, 2006).
K. O. Hill, B. Malo, K. A. Vineberg, F. Bilodeau, D. C. Johnson, and I. Skinner, “Efficient mode conversion in telecommunication fibre using externally written gratings,” Electron. Lett. 26, 1270–1272 (1990).
A. M. Vengsarkar, P. J. Lemaire, J. B. Judkins, V. Bahtia, T. Erdogan, and J. E. Sipe, “Long-period fiber gratings as band-rejection filters,” J. Lightwave Technol. 14, 58–65 (1996).
K. O. Hill, Y. Fujii, D. C. Johnson, and B. S. Kawasaki, “Photosensitivity in optical fiber waveguides: application to reflection filter fabrication,” Appl. Phys. Lett. 32, 647–649 (1978).
G. Meltz, W. W. Morey, and W. H. Glenn, “Formation of Bragg gratings in optical fibers by a transverse holographic method,” Opt. Lett. 15, 823–825 (1989).
K. O. Hill and G. Meltz, “Fiber Bragg grating technology fundamentals and overview,” J. Lightwave Technol. 15, 1263–1276 (1997).
Z. Xiong, G. D. Peng, B. Wu, and P. L. Chu, “Highly tunable Bragg gratings in single-mode polymer optical fibers,” IEEE Photon. Technol. Lett. 11, 352–354 (1999).
A. Theodosiou, A. Lacraz, A. Stassis, C. Koutsides, M. Komodromos, and K. Kalli, “Plane-by-plane femtosecond laser inscription method for single-peak Bragg gratings in multimode CYTOP polymer optical fiber,” J. Lightwave Technol. 35, 5404–5410 (2017).
I. P. Johnson, W. Yuan, A. Stefani, K. Nielsen, H. K. Rasmussen, L. Khan, D. J. Webb, K. Kalli, and O. Bang, “Optical fibre Bragg grating recorded in TOPAS cyclic olefin copolymer,” Electron. Lett. 47, 271–272 (2011).
G. Woyessa, A. Fasano, C. Markos, A. Stefani, H. K. Rasmussen, and O. Bang, “Zeonex microstructured polymer optical fiber: fabrication friendly fibers for high temperature and humidity insensitive Bragg grating sensing,” Opt. Mater. Express 7, 286–295 (2017).
T. Guo, Á González-vila, M. Loyez, and C. Caucheteur, “Plasmonic optical fiber grating immunosensing: a review,” Sensors 17, 1–19 (2017).
P. J. Lemaire, R. M. Atkins, V. Mizrahi, and W. A. Reed, “High pressure H2 loading as a technique for achieving ultrahigh UV photosensitivity and thermal sensitivity in GeO2 doped optical fibres,” Electron. Lett. 29, 1191–1193 (1993).
C. L. Liou, L. A. Wang, M. C. Shih, and T. J. Chuang, “Characteristics of hydrogenated fiber Bragg gratings,” Appl. Phys. A 64, 191–197 (1997).
K. Hill, B. Malo, F. Bilodeau, D. C. Johnson, and J. Albert, “Bragg gratings fabricated in monomode photosensitive optical fiber by UV exposure through a phase mask,” Appl. Phys. Lett. 62, 1035–1037 (1993).
C. G. Askins, M. A. Putnam, G. M. Williams, and E. J. Friebele, “Stepped-wavelength optical-fiber Bragg grating arrays fabricated in line on a draw tower,” Opt. Lett. 19, 147–149 (1994).
K. Oi, F. Barnier, and M. Obara, “Fabrication of fiber Bragg grating by femtosecond laser interferometry,” in 14th Annual Meeting of the IEEE Lasers and Electro-Optics Society (IEEE/OSA, 2001), pp. 776–777 .
A. Dragomir, D. N. Nikogosyan, K. A. Zagorulko, P. G. Kryukov, and E. M. Dianov, “Inscription of fiber Bragg gratings by ultraviolet femtosecond radiation,” Opt. Lett. 28, 2171–2173 (2003).
S. J. Mihailov, C. W. Smelser, P. Lu, R. B. Walker, D. G. H. Ding, G. Henderson, and J. Unruh, “Fiber Bragg gratings made with a phase mask and 800-nm femtosecond radiation,” Opt. Lett. 28, 995–997 (2003).
A. Martinez, M. Dubov, I. Khrushchev, and I. Bennion, “Direct writing of fibre Bragg gratings by femtosecond laser,” Electron. Lett. 40 , 1170–1172 (2004).
A. D. Kersey, M. A. Davis, H. J. Patrick, M. Leblanc, K. P. Koo, C. G. Askins, M. A. Putnam, and E. J. Friebele, “Fiber grating sensors,” J. Lightwave Technol. 15 , 1442–1463 (1997).
J. Canning, “Fibre gratings and devices for sensors and lasers,” Laser Photon. Rev. 2, 275–289 (2008).
J. L. Archambault, L. Reekie, and P. S. J. Russell, “100% reflectivity Bragg reflectors produced in optical fibres by single excimer laser pulses,” Electron. Lett. 29(5), 453–455 (1993).
B. Sutapun, M. Tabib-Azar, and A. Kazemi, “Pd-coated elastooptic fiber optic Bragg grating sensors for multiplexed hydrogen sensing,” Sens. Actuators B 60, 27–34 (1999).
C. Caucheteur, M. Debliquy, D. Lahem, and P. Mégret, “Hybrid fiber gratings coated with a catalytic sensitive layer for hydrogen sensing in air,” Opt. Express 16, 16854–16859 (2008).
V. Bhatia and A. M. Vengsarkar, “Optical fiber long-period grating sensors,” Opt. Lett. 21, 692–694 (1996).
V. Bhatia, “Applications of long-period gratings to single and multi-parameter sensing,” Opt. Express 4, 457–466 (1999).
T. Erdogan and V. Mizrahi, “Characterization of UV-induced birefringence in photosensitive Ge-doped silica optical fibers,” J. Opt. Soc. Am. B 11, 2100–2105 (1994).
C. Caucheteur, S. Bette, R. Garcia-Olcina, M. Wuilpart, S. Sales, J. Capmany, and P. Mégret, “Transverse strain measurements using the birefringence effect in fiber Bragg gratings,” Photon. Technol. Lett. 19 , 966–968 (2007).
X. Shu, L. Zhang, and I. Bennion, “Sensitivity characteristics of long-period fiber gratings,” J. Lightwave Technol. 20, 255–266 (2002).
K. Zhou, L. Zhang, X. Chen, and I. Bennion, “Low thermal sensitivity grating devices based on ex-45° tilting structure capable of forward-propagating cladding modes coupling,” J. Lightwave Technol. 24, 5087–5094 (2006).
Z. Yan, Q. Sun, C. Wang, Z. Sun, C. Mou, K. Zhou, D. Liu, and L. Zhang, “Refractive index and temperature sensitivity characterization of excessively tilted fiber grating,” Opt. Express 25, 3336–3346 (2017).
E. Anemogiannis, E. N. Glytsis, and T. K. Gaylord, “Transmission characteristics of long-period fiber gratings having arbitrary azimuthal/radial refractive index variations,” J. Light.Technol. 21 , 218–227 (2003).
W. Zhou, D. J. Mandia, S. T. Barry, and J. Albert, “Absolute near-infrared refractometry with a calibrated tilted fiber Bragg grating,” Opt. Lett. 40, 1713 (2015).
C. Caucheteur, T. Guo, F. Liu, B.-O. Guan, and J. Albert, “Ultrasensitive plasmonic sensing in air using optical fibre spectral combs,” Nat. Commun. 7, 13371 (2016).
D. Feng, J. Albert, Y. Jiang, C. Liu, B. Jiang, H. Wang, and J. Zhao, “Symmetry selective cladding modes coupling in ultrafast-written fiber Bragg gratings in two-mode fiber,” Opt. Express 27, 18410–18420 (2019).
A. Ioannou, A. Theodosiou, C. Caucheteur, and K. Kalli, “Femtosecond laser inscribed tilted gratings for leaky mode excitation in optical fibers,” J. Lightwave Technol. 38 , 1921–1928 (2020).
J. W. Fleming, “Dispersion in GeO2 -SiO2 glasses,” Appl. Opt. 23(24), 4486–4493 (1984).
J. Albert, “Permanent photoinduced refractive-index changes for Bragg gratings in silicate glass waveguides and fiber,” MRS Bull. 23 , 36–41 (1998).
X. Zhang, S. Cai, F. Liu, H. Chen, P. Yan, Y. Yuan, T. Guo, and J. Albert, “In situ determination of the complex permittivity of ultrathin H2-infused palladium coatings for plasmonic fiber optic sensors in the near infrared,” J. Mater. Chem. C 6, 5161–5170 (2018).
F. Liu and J. Albert, “40 GHz-rate all-optical cross-modulation of core-guided near infrared light in single mode fiber by surface plasmons on gold-coated tilted fiber Bragg gratings,” APL Photonics 4, 126104 (2019).
F. Liu, X. Zhang, K. Li, T. Guo, A. Ianoul, and J. Albert, “Discrimination of bulk and surface refractive index change in plasmonic sensors with narrow bandwidth resonance combs,” ACS Sens. 6, 3013–3023 (2021).
A. Ivanov, “Multi-parameter fiber optic sensors for structural health monitoring,” M.A.Sc. thesis (Carleton University, 2008).
Commercial literature from Ibsen Photonics, https://ibsen.com/products/interrogation-monitors/i-mon-usb/i-mon-256-512-usb/.
S. D. Dyer, P. A. Williams, R. J. Espejo, J. D. Kofler, and S. M. Etzel, “Fundamental limits in fiber Bragg grating peak wavelength measurements (invited paper),” Proc. SPIE 5855, 88–93 (2005).
F. Liu, X. Tong, C. Zhang, C. Deng, Q. Xiong, Z. Zheng, and P. Wang, “Multipeak detection algorithm based on the Hilbert transform for optical FBG sensing,” Opt. Fiber Technol. 45, 47–52 (2018).
Y. Yang, J. Wu, M. Wang, Q. Wang, Q. Yu, and K. P. Chen, “Fast demodulation of fiber Bragg grating wavelength from low-resolution spectral measurements using Buneman frequency estimation,” J. Lightwave Technol. 38, 5142–5148 (2020).
D. Ganziy, B. Rose, and O. Bang, “Compact multichannel high-resolution microelectro-mechanical systems-based interrogator for Fiber Bragg grating sensing,” Appl. Opt. 56, 3622–3627 (2017).
M. P. Fernandez, L. A. Bulus Rossini, J. L. Cruz, M. V. Andres, and P. A. Costanzo Caso, “High-speed and high-resolution interrogation of FBG sensors using wavelength-to-time mapping and gaussian filters,” Opt. Express 27, 36815–36823 (2019).
J. Wang, T. Huang, F. Duan, Q. Cheng, F. Zhang, and X. Qu, “Fast peak-tracking method for FBG reflection spectrum and nonlinear error compensation,” Opt. Lett. 45, 451–454 (2020).
M. Shaimerdenova, A. Bekmurzayeva, M. Sypabekova, and D. Tosi, “Interrogation of coarsely sampled tilted fiber Bragg grating (TFBG) sensors with KLT,” Opt. Express 25, 33487–33496 (2017).
F. Ouellette, J. Li, Z. Ou, and J. Albert, “High-resolution interrogation of tilted fiber Bragg gratings using an extended range dual wavelength differential detection,” Opt. Express 28, 14662–14676 (2020).
K. A. Tomyshev, D. K. Tazhetdinova, E. S. Manuilovich, and O. V. Butov, “High-resolution fiber optic surface plasmon resonance sensor for biomedical applications,” J. Appl. Phys. 124, 113106 (2018).
K. A. Tomyshev, E. S. Manuilovich, D. K. Tazhetdinova, E. I. Dolzhenko, and O. V. Butov, “High-precision data analysis for TFBG-assisted refractometer,” Sens. Act. A 308, 112016 (2020).
T. Gang, F. Liu, M. Hu, and J. Albert, “Integrated differential area method for variable sensitivity interrogation of tilted fiber Bragg grating sensors,” J. Lightwave Technol. 37, 4531–4536 (2019).
L. Fazzi and R. M. Groves, “Demodulation of a tilted fibre Bragg grating transmission signal using α-shape modified Delaunay triangulation,” Measurement 166, 108197 (2020).
M. Lobry, M. Loyez, K. Chah, E. M. Hassan, E. Goormaghtigh, M. C. DeRosa, R. Wattiez, and C. Caucheteur, “HER2 biosensing through SPR-envelope tracking in plasmonic optical fiber gratings,” Biomed. Opt. Express 11, 4862–4871 (2020).
W. Yuan, Q. Zhao, L. Li, Y. Wang, and C. Yu, “Simultaneous measurement of temperature and curvature using ring-core fiber-based Mach-Zehnder interferometer,” Opt. Express 29, 17915–17925 (2021).
Q. Chen, D. N. Wang, and F. Gao, “Simultaneous refractive index and temperature sensing based on a fiber surface waveguide and fiber Bragg gratings,” Opt. Lett. 46, 1209–1212 (2021).
T. Osuch, T. Jurek, K. Markowski, and K. Jedrzejewski, “Simultaneous measurement of liquid level and temperature using tilted fiber Bragg grating,” IEEE Sens. J. 16, 1205–1209 (2016).
P. Kisala, D. Harasim, and J. Mroczka, “Temperature-insensitive simultaneous rotation and displacement (bending) sensor based on tilted fiber Bragg grating,” Opt. Express 24, 29922–29929 (2016).
S. Upendar, M. A. Schmidt, and T. Weiss, “What optical fiber modes reveal: group velocity and effective index for external perturbations,” J. Opt. Soc. Am. B 38, 1097–1103 (2021).
J. Jin, Y. Zhang, Y. Zhu, D. Zhang, and H. Zhang, “Analysis and correction method of axial strain error in multi-core fiber shape sensing,” IEEE Sensors J. 20, 12716–12722 (2020).
S. Bandyopadhyay, L. shao, M. Smietana, C. Wang, J. Hu, G. Wang, W. He, G. Gu, and Y. Yang, “Employing higher order cladding modes of fiber Bragg grating for analysis of refractive index change in volume and at the surface,” IEEE Photonics J. 12, 7100313 (2020).
H. J. W. M. Hoekstra and M. Hammer, “General relation for group delay and the relevance of group delay for refractometric sensing,” J. Opt. Soc. Am. B 31, 1561–1567 (2014).
M. Cavillon, M. Lancry, B. Poumellec, Y. Wang, J. Canning, K. Cook, T. Hawkins, P. Dragic, and J. Ballato, “Overview of high temperature fibre Bragg gratings and potential improvement using highly doped aluminosilicate glass optical fibres,” J. Phys.: Photonics 1, 042001 (2019).
C. Zhu, D. Alla, and J. Huang, “High-temperature stable FBGs fabricated by a point-by-point femtosecond laser inscription for multi-parameter sensing,” OSA Continuum 4, 355–363 (2021).
N. Safari-Yazd, K. Chah, C. Caucheteur, and P. Mégret, “Thermal regeneration of tilted Bragg gratings UV photo-inscribed in hydrogen-loaded standard optical fibers,” J. Lightwave Technol. 39, 3582–3590 (2021).
X. Rosello-Mecho, M. Delgado-Pinar, A. Diez, and M. V. Andres, “Measurement of Pockels’ coefficients and demonstration of the anisotropy of the elasto-optic effect in optical fibers under axial strain,” Opt. Lett. 41, 2934–2937 (2016).
J. Villatoro, O. Arrizabalaga, G. Durana, I. Sáez de Ocáriz, E. Antonio-Lopez, J. Zubia, A. Schülzgen, and R. Amezcua-Correa, “Accurate strain sensing based on super-mode interference in strongly coupled multi-core optical fibres,” Sci. Rep. 7, 4451 (2017).
V. Voisin, C. Caucheteur, P. Mégret, and J. Albert, “Anomalous effective strain-optic constants of nonparaxial optical fiber mode,” Opt. Lett. 39, 578 (2014).
F. Khan, A. Denasi, D. Barrera, J. Madrigal, S. Sales, and S. Misra, “Multicore optical fibers with Bragg gratings as shape sensor for flexible medical instruments,” IEEE Sens. J. 19, 5878–5884 (2019).
T. Kissinger, E. Chehura, S. E. Staines, S. W. James, and R. P. Tatam, “Dynamic fiber-optic shape sensing using fiber segment interferometry,” J. Lightwave Technol. 36, 917–925 (2018).
R. T. Schermer and J. H. Cole, “Improved bend loss formula verified for optical fiber by simulation and experiment,” IEEE J. Quantum Electron. 43, 899–909 (2007).
L. Shao, L. Xiong, C. Chen, A. Laronche, and J. Albert, “Directional bend sensor based on re-grown tilted fiber Bragg grating,” J. Lightwave Technol. 28 , 2681–2687 (2010).
D. Feng, J. Albert, Y. Hou, B. Jiang, Y. Jiang, Y. Ma, and J. Zhao, “Co-located angularly offset fiber Bragg grating pair for temperature-compensated unambiguous 3D shape sensing,” Appl. Opt. 60 , 4185–4189 (2021).
D. Feng, X. Qiao, and J. Albert, “Off-axis ultraviolet-written fiber Bragg gratings for directional bending measurements,” Opt. Lett. 41, 1201–1204 (2016).
D. Feng, W. Zhou, X. Qiao, and J. Albert, “Compact optical fiber 3D shape sensor based on a pair of orthogonal tilted fiber Bragg gratings,” Sci. Rep. 5, 17415 (2015).
H. Fan, L. Chen, and X. Bao, “Fiber-optic ultrasound transmitter based on multimode interference in curved adhesive waveguide,” IEEE Photon. Technol. Lett. 32, 325–328 (2020).
H. Fan, L. Zhang, S. Gao, L. Chen, and X. Bao, “Ultrasound sensing based on an in-fiber dual-cavity Fabry-Pérot interferometer,” Opt. Lett. 44, 3606–3609 (2020).
H. Fan, L. Chen, and X. Bao, “Chalcogenide microfiber-assisted silica microfiber for ultrasound detection,” Opt. Lett. 45, 1128–1131 (2020).
H. Fan, W. Ma, L. Chen, and X. Bao, “Ultracompact twisted silica taper for 20 kHz to 94 MHz ultrasound sensing,” Opt. Lett. 45, 3889–3892 (2020).
B. Gu, W. Qi, Y. Zhou, Z. Wu, P. P. Shum, and F. Luan, “Reflective liquid level sensor based on modes conversion in thin-core fiber incorporating tilted fiber Bragg grating,” Opt. Express 22, 11834–11839 (2014).
C. Shen, X. Lian, V. Kavungal, C. Zhong, D. Liu, Y. Semenova, G. Farrell, J. Albert, and J. F. Donegan, “Optical spectral sweep comb liquid flow rate sensor,” Opt. Lett. 43, 751–754 (2018).
C. Shen, D. Liu, X. Lian, T. Lang, C. Zhao, Y. Semenova, and J. Albert, “Microfluidic flow direction and rate vector sensor based on a partially gold-coated TFBG,” Opt. Lett. 45, 2776–2779 (2020).
C. Shen, C. Zhong, D. Liu, X. Xian, J. Zheng, J. Wang, Y. Semenova, G. Farrell, J. Albert, and J. F. Donegan, “Measurements of milli-Newton surface tension forces with tilted fiber Bragg gratings,” Opt. Lett. 43, 2–5 (2018).
A. Sihvola, Electromagnetic Mixing Formulas and Applications (IEEE Press,, 1999).
C. Shen, W. Zhou, and J. Albert, “Polarization-resolved evanescent wave scattering from gold-coated tilted fiber gratings,” Opt. Express 22, 5277 (2014).
C. Shen, L. Xiong, A. Bialiayeu, Y. Zhang, and J. Albert, “Polarization-resolved near- and far-field radiation from near-infrared tilted fiber Bragg gratings,” J. Lightwave Technol. 32, 2157–2162 (2014).
J.-M. Renoirt, M. Debliquy, J. Albert, A. Ianoul, and C. Caucheteur, “Surface plasmon resonances in oriented silver nanowire coatings on optical fibers,” J. Phys. Chem. C 118, 11035–11042 (2014).
D. J. Mandia, W. Zhou, J. Albert, and S. T. Barry, “CVD on optical fibers: tilted fiber Bragg gratings as real-time sensing platforms,” Chem. Vap. Depos. 21, 4–20 (2015).
Y. Yuan, T. Guo, X. Qiu, J. Tang, Y. Huang, L. Zhuang, S. Zhou, Z. Li, B. Guan, X. Zhang, and J. Albert, “Electrochemical surface plasmon resonance fiber-optic sensor: in-situ detection of electroactive biofilms,” Anal. Chem. 88, 7609–7616 (2016).
A. Bialiayeu, C. Caucheteur, N. Ahamad, A. Ianoul, and J. Albert, “Self-optimized metal coating for fiber plasmonics by electroless deposition,” Opt. Express 19, 18742–18753 (2011).
W. Zhou, D. J. Mandia, M. B. E. Griffiths, A. Bialiayeu, Y. Zhang, P. G. Gordon, S. T. Barry, and J. Albert, “Polarization-dependent properties of the cladding modes of single mode fiber covered with gold nanoparticles,” Opt. Express 21, 245–255 (2013).
D. J. Mandia, M. B. E. Griffiths, W. Zhou, P. G. Gordon, J. Albert, and S. T. Barry, “In situ deposition monitoring by a tilted fiber Bragg grating optical probe: probing nucleation in chemical vapour deposition of gold,” Phys. Procedia 46, 12–20 (2013).
L. Y. Shao, J. P. Coyle, S. T. Barry, and J. Albert, “Anomalous permittivity and plasmon resonances of copper nanoparticle conformal coatings on optical fibers,” Opt. Mater. Express 1, 128–137 (2011).
A. Bialiayeu, A. Bottomley, D. Prezgot, A. Ianoul, and J. Albert, “Plasmon-enhanced refractometry using silver nanowire coating on tilted fiber Bragg gratings,” Nanotechnology 23, 444012 (2012).
J. M. Renoirt, C. Zhang, M. Debliquy, M. G. Olivier, P. Megret, and C. Caucheteur, “High-refractive-index transparent coatings enhance the optical fiber cladding modes refractometric sensitivity,” Opt. Express 21, 29073–29082 (2013).
S. Lepinay, A. Staff, A. Ianoul, and J. Albert, “Improved detection limits of protein optical fiber biosensors coated with gold nanoparticles,” Biosens. Bioelectron. 52, 337–344 (2014).
D. J. Mandia, W. Zhou, M. J. Ward, H. Joress, J. J. Sims, J. B. Giorgi, J. Albert, and S. T. Barry, “The effect of ALD-grown Al2O3 on the refractive index sensitivity of CVD gold-coated optical fiber sensors,” Nanotechnology 26, 434002 (2015).
Y. Si, J. Lao, X. Zhang, Y. Liu, S. Cai, A. G. Vila, K. Li, Y. Huang, Y. Yuan, C. Caucheteur, and T. Guo, “Electrochemical plasmonic fiber-optic sensors for ultra-sensitive heavy metal detection,” J. Lightwave Technol. 37, 3495–3502 (2019).
M. Śmietana, T. Drażewski, P. Firek, P. Mikulic, and W. J. Bock, “Comparison of Al2O3 nano-overlays deposited with magnetron sputtering and atomic layer deposition on optical fibers for sensing purpose,” in Micro/Nano Materials, Devices, and Systems (SPIE, 2013), p. 89231G .
Y. Chen, F. Tang, Y. Bao, Y. Tang, and G. Chen, “A Fe-C coated long-period fiber grating sensor for corrosion-induced mass loss measurement,” Opt. Lett. 41, 2306–2309 (2016).
Y. Chen, F. Tang, Y. Tang, M. J. O’Keefe, and G. Chen, “Mechanism and sensitivity of Fe-C coated long period fiber grating sensors for steel corrosion monitoring of RC structures,” Corros. Sci. 127, 70–81 (2017).
F. Tang, Z. Li, Y. Chen, H. N. Li, J. Huang, and M. J. O’Keefe, “Monitoring passive film growth on steel using Fe-C coated long period grating fiber sensor,” IEEE Sens. J. 19, 6748–6755 (2019).
R. Wang, Z. Li, X. Chen, N. Hu, Y. Xiao, K. Li, and T. Guo, “Mode Splitting in ITO-nanocoated tilted fiber Bragg gratings for vector twist measurement,” J. Lightwave Technol 39 , 4151–4157 (2021).
A. Czapla, W. J. Bock, T. R. Wolinski, P. Mikulic, E. Nowinowski-Kruszelnicki, and R. Dabrowski, “Improving the electric field sensing capabilities of the long-period fiber grating coated with a liquid crystal layer,” Opt. Express 24, 5662–5673 (2016).
S. Mathews, G. Farrell, and Y. Semenova, “Liquid crystal infiltrated photonic crystal fibers for electric field intensity measurements,” Appl. Opt. 50, 2628–2635 (2011).
M. M. Tefelska, T. R. Wolinski, S. Ertman, K. Milenko, R. Laczkowski, A. Siarkowska, and A. W. Domanski, “Electric field sensing with photonic liquid crystal fibers based on micro-electrodes systems,” J. Lightwave Technol. 33, 2405–2411 (2015).
L. Gao, T. Zhu, M. Deng, K. S. Chiang, X. Sun, X. Dong, and Y. Hou, “Long-period fiber grating within D-shaped fiber using magnetic fluid for magnetic-field detection,” IEEE Photonics J. 4 , 2095–2104 (2012).
Y. Miao, K. Zhang, B. Liu, W. Lin, H. Zhang, Y. Lu, and J. Yao, “Ferrofluidinfiltrated microstructured optical fiber long-period grating,” IEEE Photonics Technol. Lett. 25 , 306–309 (2012).
Z. Zhang, T. Guo, X. Zhang, J. Xu, W. Xie, M. Nie, Q. Wu, B. O. Guan, and J. Albert, “Plasmonic fiber-optic vector magnetometer,” Appl. Phys. Lett. 108 , 101105 (2016).
W. Lin, Y. Miao, H. Zhang, B. Liu, Y. Liu, B. Song, and J. Wu, “Two-dimensional magnetic field vector sensor based on tilted fiber Bragg grating and magnetic fluid,” J. Lightwave Technol. 31 , 2599–2605 (2013).
D. Yang, L. Du, Z. Xu, Y. Jiang, J. Xu, M. Wang, Y. Bai, and H. Wang, “Magnetic field sensing based on tilted fiber Bragg grating coated with nanoparticle magnetic fluid,” Appl. Phys. Lett. 104 , 061903 (2014).
Z. Zhang, F. Liu, Q. Ma, L. Li, and T. Guo, “Vector magnetometer based on localized scattering between optical fiber spectral combs and magnetic nanoparticles,” J. Lightwave Technol. 39 , 6599–6605 (2021).
X. Chen, F. Du, T. Guo, J. Lao, X. Zhang, Z. Zhang, F. Liu, J. Li, C. Chen, and B.-O. Guan, “Liquid crystal-embedded tilted fiber grating electric field intensity sensor,” J. Lightwave Technol. 35 , 3347–3353 (2017).
F. Shi, X. Bai, F. Wang, F. Pang, S. Pu, and X. Zeng, “All-fiber magnetic field sensor based on hollow optical fiber and magnetic fluid,” IEEE Sens. J. 17 , 619–622 (2016).
J. Yin, S. Ruan, T. Liu, J. Jiang, S. Wang, H. Wei, and P. Yan, “All-fiber-optic vector magnetometer based on nano-magnetic fluids filled double-clad photonic crystal fiber,” Sens. Actuators B 238, 518–524 (2017).
J. Yin, P. Yan, H. Chen, L. Yu, J. Jiang, M. Zhang, and S. Ruan, “All-fiber-optic vector magnetometer based on anisotropic magnetism-manipulation of ferromagnetism nanoparticles,” Appl. Phys. Lett. 110 , 231104 (2017).
M. Ma, H. Chen, S. Li, X. Jing, W. Zhang, and M. Wang, “Analysis of a magnetic field sensor based on a Sagnac interferometer using a magnetic fluid-filled birefringent photonic crystal fiber,” IEEE Photonics J. 11 , 1–10 (2019).
W. Lin, Y. Miao, H. Zhang, B. Liu, Y. Liu, and B. Song, “Fiber-optic in-line magnetic field sensor based on the magnetic fluid and multimode interference effects,” Appl. Phys. Lett. 103(15), 151101 (2013).
S. Dong, S. Pu, and H. Wang, “Magnetic field sensing based on magnetic-fluid-clad fiber-optic structure with taper-like and lateral-offset fusion splicing,” Opt. Express 22 , 19108–19116 (2014).
A. Layeghi and H. Latifi, “Magnetic field vector sensor by a nonadiabatic tapered Hi-Bi fiber and ferrofluid nanoparticles,” Opt. Laser Technol. 102, 184–190 (2018).
R. Q. Lv, Y. Zhao, D. Wang, and Q. Wang, “Magnetic fluid-filled optical fiber Fabry-Pérot sensor for magnetic field measurement,” IEEE Photonics Technol. Lett. 26 , 217–219 (2013).
Y. Chen, W. Sun, Y. Zhang, G. Liu, Y. Luo, J. Dong, Y. Zhong, W. Zhu, J. Yu, and Z. Chen, “Magnetic nanoparticles functionalized few-mode-fiber-based plasmonic vector magnetometer,” Nanomaterials 9 , 785 (2019).
Y. Chen, Y. Hu, H. Cheng, F. Yan, Q. Lin, Y. Chen, P. Wu, L. Chen, G. Liu, G. Peng, Y. Luo, and Z. Chen, “Side-polished single-mode-multimode-single-mode fiber structure for the vector magnetic field sensing,” J. Lightwave Technol. 38 , 5837–5843 (2020).
C. P. Grey and J. M. Tarascon, “Sustainability and in situ monitoring in battery development,” Nat. Mater. 16, 45–56 (2017).
G. Yang, C. Leitão, Y. Li, J. Pinto, and X. Jiang, “Real-time temperature measurement with fiber Bragg sensors in lithium batteries for safety usage,” Measurement 46 , 3166–3172 (2013).
L. H. J. Raijmakers, D. L. Danilov, R. A. Eichel, and P. H. L. Notten, “A review on various temperature-indication methods for Li-ion batteries,” Appl. Energy 240, 918–945 (2019).
X. Cheng and M. Pecht, “In situ stress measurement techniques on Li-ion battery electrodes: a review,” Energies 10, 591 (2017).
J. Peng, X. Zhou, S. Jia, Y. Jin, S. Xu, and J. Chen, “High precision strain monitoring for lithium ion batteries based on fiber Bragg grating sensors,” J. Power Sources 443, 226692 (2019).
A. Fortier, M. Tsao, N. D. Williard, Y. Xing, and M. G. Pecht, “Preliminary study on integration of fiber optic Bragg grating sensors in li-ion batteries and in situ strain and temperature monitoring of battery cells,” Energies 10 , 838 (2017).
M. Nascimento, T. Paixão, M. S. Ferreira, and J. Pinto, “Thermal mapping of a lithium polymer batteries pack with FBGs network,” Batteries 4 , 67 (2018).
S. Novais, M. Nascimento, L. Grande, M. F. Domingues, P. Antunes, N. Alberto, C. Leitao, R. Oliveira, S. Koch, G. T. Kim, S. Passerini, and J. Pinto, “Internal and external temperature monitoring of a Li-ion battery with fiber Bragg grating sensors,” Sensors 16 , 1394 (2016).
A. Raghavan, P. Kiesel, L. W. Sommer, J. Schwartz, A. Lochbaum, A. Hegyi, A. Schuh, K. Arakaki, B. Saha, A. Ganguli, K. H. Kim, C. Kim, H. J. Hah, S. kim, G.-O. Hwang, G.-C. Chung, B. Choi, and M. Alamgir, “Embedded fiber-optic sensing for accurate internal monitoring of cell state in advanced battery management systems part 1: cell embedding method and performance,” J. Power Sources 341, 466–473 (2017).
A. Ganguli, B. Saha, A. Raghavan, P. Kiesel, K. Arakaki, A. Schuh, J. Schwartz, A. Hegyi, L. W. Sommer, A. Lochbaum, S. Sahu, and M. Alamgir, “Embedded fiber-optic sensing for accurate internal monitoring of cell state in advanced battery management systems part 2: internal cell signals and utility for state estimation,” J. Power Sources 341, 474–482 (2017).
A. R. Ghannoum, P. Nieva, A. Yu, and A. Khajepour, “Development of embedded fiber-optic evanescent wave sensors for optical characterization of graphite anodes in lithium-ion batteries,” ACS Appl. Mater. Interfaces 9 , 41284–41290 (2017).
M. Nascimento, M. S. Ferreira, and J. L. Pinto, “Simultaneous sensing of temperature and bi-directional strain in a prismatic Li-ion battery,” Batteries 4 , 23 (2018).
M. Nascimento, S. Movais, M. Ding, M. S. Ferreira, S. Koch, S. Passerini, and J. Pinto, “Internal strain and temperature discrimination with optical fiber hybrid sensors in Li-ion batteries,” J. Power Sources 410, 1–9 (2019).
T. Yamanaka, H. Nakagawa, S. Tsubouchi, Y. Domi, T. Doi, T. Abe, and Z. Ogumi, “In situ Raman spectroscopic studies on concentration of electrolyte salt in lithium ion batteries by using ultrafine multifiber probes,” ChemSusChem 10 , 855–861 (2017).
J. Huang, L. A. Blanquer, J. Bonefacino, E. R. Logan, D. A. D. Corte, C. Delacourt, B. M. Gallant, S. T. Boles, J. R. Dhan, H.-Y. Tam, and J.-M. Tarascon, “Operando decoding of chemical and thermal events in commercial Na (Li)-ion cells via optical sensors,” Nat. Energy 5 , 674–683 (2020).
J. Lao, P. Sun, F. Liu, X. Zhang, C. Zhao, W. Mai, T. Guo, G. Xiao, and J. Albert, “In situ plasmonic optical fiber detection of the state of charge of supercapacitors for renewable energy storage,” Light: Sci. Appl. 7, 1–12 (2018).
F. Chiavaioli, C. A. J. Gouveia, P. A. S. Jorge, and F. Baldini, “Towards a uniform metrological assessment of grating-based optical fiber sensors: from refractometers to biosensors,” Biosensors 7, 23 (2017).
Y. Liu and J. Yu, “Oriented immobilization of proteins on solid supports for use in biosensors and biochips: a review,” Microchim. Acta 183, 1–19 (2016).
G. Ramsay, “DNA chips: State-of-the art,” Nat. Biotechnol. 16, 40–44 (1998).
J. R. Crowther, The ELISA Guidebook, 2nd ed., (Springer International Publishing, 2009).
M. M. Bilek and D. R. McKenzie, “Plasma modified surfaces for covalent immobilization of functional biomolecules in the absence of chemical linkers: towards better biosensors and a new generation of medical implants,” Biophys. Rev. 2, 55–65 (2010).
E. Makhneva, L. Barillas, Z. Farka, M. Pastucha, P. Skládal, K.-D. Weltmann, and K. Fricke, “Functional plasma polymerized surfaces for biosensing,” ACS Appl. Mater. Interfaces 12, 17100–17112 (2020).
M. Oliverio, S. Perotto, G. C. Messina, L. Lovato, and F. De Angelis, “Chemical functionalization of plasmonic surface biosensors: A tutorial review on issues, strategies, and costs,” ACS Appl. Mater. Interfaces 9, 29394–29411 (2017).
M. L. Sham, J. Li, P. C. Ma, and J. K. Kim, “Cleaning and functionalization of polymer surfaces and nanoscale carbon fillers by UV/ozone treatment: a review,” J. Compos. Mater. 43, 1537–1564 (2009).
M. Asal, Ö Özen, M. Şahinler, and İ Polatoğlu, “Recent developments in enzyme, DNA and immuno-based biosensors,” Sensors 18 , 1924 (2018).
A. Zamora-Gálvez, E. Morales-Narváez, C. C. Mayorga-Martinez, and A. Merkoçi, “Nanomaterials connected to antibodies and molecularly imprinted polymers as bio/receptors for bio/sensor applications,” Appl. Mater. Today 9, 387–401 (2017).
M. Loyez, J. Albert, C. Caucheteur, and R. Wattiez, “Cytokeratins biosensing using tilted fiber gratings,” Biosensors 8, 1–8 (2018).
A. Shakeri, N. A. Jarad, A. Leung, L. Soleymani, and T. F. Didar, “Biofunctionalization of glass- and paper-based microfluidic devices: a review,” Adv. Mater. Interfaces 6, 1–16 (2019).
A. K. Trilling, J. Beekwilder, and H. Zuilhof, “Antibody orientation on biosensor surfaces: a minireview,” Analyst 138, 1619–1627 (2013).
M. Loyez, M. Lobry, R. Wattiez, and C. Caucheteur, “Optical fiber gratings immunoassays,” Sensors 19, 2595 (2019).
D. Santano, A. Urrutia, C. R. Zamarreno, and I. Del Villar, “Advances in fiber optic DNA-based sensors: A Review,” IEEE Sens. J. 21, 12679–12691 (2021).
S. Lépinay, A. Ianoul, and J. Albert, “Molecular imprinted polymer-coated optical fiber sensor for the identification of low molecular weight molecules,” Talanta 128, 401–407 (2014).
M. Janczuk-Richter, M. Dominik, E. Roźniecka, M. Koba, P. Mikulic, W. J. Bock, M. Łoś, M. Śmietana, and J. Niedziółka-Jönsson, “Long-period fiber grating sensor for detection of viruses,” Sens. Act. B 250, 32–38 (2017).
M. Sypabekova, S. Korganbayev, Á González-Vila, C. Caucheteur, M. Shaimerdenova, T. Ayupova, A. Bekmurzayeva, L. Vangelista, and D. Tosi, “Functionalized etched tilted fiber Bragg grating aptasensor for label-free protein detection,” Biosens. Bioelectron. 146, 111765 (2019).
A. Bekmurzayeva, K. Dukenbayev, M. Shaimerdenova, I. Bekniyazov, T. Ayupova, M. Sypabekova, C. Molardi, and D. Tosi, “Etched fiber Bragg grating biosensor functionalized with aptamers for detection of thrombin,” Sensors 18 , 4298 (2018).
A. Celebanska, Y. Chiniforooshan, M. Janik, P. Mikulic, B. Sellamuthu, R. Walsh, J. Perreault, and W. J. Bock, “Label-free cocaine aptasensor based on a long-period fiber grating,” Opt. Lett. 44, 2482 (2019).
A. Baliyan, S. Sital, U. Tiwari, R. Gupta, and E. K. Sharma, “Long period fiber grating based sensor for the detection of triacylglycerides,” Biosens. Bioelectron. 79, 693–700 (2016).
F. Esposito, L. Sansone, C. Taddei, S. Campopiano, M. Giordano, and A. Iadicicco, “Ultrasensitive biosensor based on long period grating coated with polycarbonate-graphene oxide multilayer,” Sens. Act. B 274, 517–526 (2018).
J. Yang, L. Zhou, J. Huang, C. Tao, X. Li, and W. Chen, “Sensitivity enhancing of transition mode long-period fiber grating as methane sensor using high refractive index polycarbonate/cryptophane A overlay deposition,” Sens. Act B 207, 477–480 (2015).
S. Barrias, J. R. Fernandes, J. E. Eiras-Dias, J. Brazão, and P. Martins-Lopes, “Label free DNA-based optical biosensor as a potential system for wine authenticity,” Food Chem. 270, 299–304 (2019).
B. Luo, Z. Yan, Z. Sun, Y. Liu, M. Zhao, and L. Zhang, “Biosensor based on excessively tilted fiber grating in thin-cladding optical fiber for sensitive and selective detection of low glucose concentration,” Opt. Express 23, 32429 (2015).
Y. Zhao, R.-J. Tong, F. Xia, and Y. Peng, “Current status of optical fiber biosensor based on surface plasmon resonance,” Biosens. Bioelectron. 142, 111505 (2019).
B.D. Gupta, A.M. Shrivastav, and S.P. Usha, Optical Sensors for Biomedical Diagnostics and Environmental Monitoring, 1st ed. (CRC Press,, 2017).
B. Peeters, S. Safdar, D. Daems, P. Goos, D. Spasic, and J. Lammertyn, “Solid-phase PCR-amplified DNAzyme activity for real-time FO-SPR detection of the MCR-2 gene,” Anal. Chem. 92 , 10783–10791 (2020).
N. A. M. Zainuddin, M. M. Ariannejad, P. T. Arasu, S. W. Harun, and R. Zakaria, “Investigation of cladding thicknesses on silver SPR based side-polished optical fiber refractive-index sensor,” Results Phys. 13, 102255 (2019).
K. Shah, N. K. Sharma, and V. Sajal, “SPR based fiber optic sensor with bi layers of indium tin oxide and platinum: a theoretical evaluation,” Optik 135, 50–56 (2017).
J. Homola, S. S. Yee, and G. Gauglitz, “Surface plasmon resonance sensors: review,” Sens. Act. B 54, 3–15 (1999).
Y. V. Stebunov, D. I. Yakubovsky, D. Y. Fedyanin, A. V. Arsenin, and V. S. Volkov, “Superior sensitivity of copper-based plasmonic biosensors,” Langmuir 34, 4681–4687 (2018).
K. J. Huang, Y. J. Liu, H. B. Wang, T. Gan, Y. M. Liu, and L. L. Wang, “Signal amplification for electrochemical DNA biosensor based on two-dimensional graphene analogue tungsten sulfide-graphene composites and gold nanoparticles,” Sens. Act. B 191, 828–836 (2014).
M. Loyez, C. Ribaut, C. Caucheteur, and R. Wattiez, “Functionalized gold electroless-plated optical fiber gratings for reliable surface biosensing,” Sens. Act B 280, 54–61 (2019).
J. M. M. M. de Almeida, H. Vasconcelos, P. A. S. Jorge, and L. Coelho, “Plasmonic optical fiber sensor based on double step growth of gold nano-islands,” Sensors 18 , 1–13 (2018).
I. Antohe, K. Schouteden, P. Goos, F. Delport, D. Spasic, and J. Lammertyn, “Thermal annealing of gold coated fiber optic surfaces for improved plasmonic biosensing,” Sens. Actu. B 229, 678–685 (2016).
D. Daems, B. Peeters, F. Delport, T. Remans, J. Lammertyn, and D. Spasic, “Identification and quantification of celery allergens using fiber optic surface plasmon resonance PCR,” Sensors 17 , 1754 (2017).
F. Wang, Y. Zhang, M. Lu, Y. Du, M. Chen, S. Meng, W. Ji, C. Sun, and W. Peng, “Near-infrared band gold nanoparticles-Au film “hot spot” model based label-free ultratrace lead (II) ions detection via fiber SPR DNAzyme biosensor,” Sens. Act. B 337, 129816 (2021).
S. M. Tripathi, K. Dandapat, W. J. Bock, P. Mikulic, J. Perreault, and B. Sellamuthu, “Gold coated dual-resonance long-period fiber gratings (DR-LPFG) based aptasensor for cyanobacterial toxin detection,” Sens. Bio-Sensing Res. 25, 100289 (2019).
F. Chiavaioli, P. Biswas, C. Trono, S. Jana, S. Bandyopadhyay, N. Basumallick, A. Giannetti, S. Tombelli, S. Bera, A. Mallick, and F. Baldini, “Sol-gel-based titania-silica thin film overlay for long period fiber grating-based biosensors,” Anal. Chem. 87, 12024–12031 (2015).
L. L. Liu, L. Marques, R. Correia, S. P. Morgan, S. W. Lee, P. Tighe, L. Fairclough, and S. Korposh, “Highly sensitive label-free antibody detection using a long period fibre grating sensor,” Sens. Act. B 271, 24–32 (2018).
R. Wang, Z. Ren, D. Kong, B. Hu, and Z. He, “Highly sensitive label-free biosensor based on graphene-oxide functionalized micro-tapered long period fiber grating,” Opt. Mater. (Amst) 109, 110253 (2020).
G. Quero, M. Consales, R. Severino, P. Vaiano, A. Boniello, A. Sandomenico, M. Ruvo, A. Borriello, L. Diodato, S. Zuppolini, M. Giordano, I. C. Nettore, C. Mazzarella, A. Colao, P. E. Macchia, F. Santorelli, A. Cutolo, and A. Cusano, “Long period fiber grating nano-optrode for cancer biomarker detection,” Biosens. Bioelectron. 80, 590–600 (2016).
W. Hu, Y. Huang, C. Chen, Y. Liu, T. Guo, and B. O. Guan, “Highly sensitive detection of dopamine using a graphene functionalized plasmonic fiber-optic sensor with aptamer conformational amplification,” Sens. Act. B 264, 440–447 (2018).
B. Jiang, K. Zhou, C. Wang, Q. Sun, G. Yin, Z. Tai, K. Wilson, J. Zhao, and L. Zhang, “Label-free glucose biosensor based on enzymatic graphene oxide-functionalized tilted fiber grating,” Sens. Act. B. 254, 1033–1039 (2018).
B. Luo, Y. Xu, S. Wu, M. Zhao, P. Jiang, S. Shi, Z. Zhang, Y. Wang, L. Wang, and Y. Liu, “A novel immunosensor based on excessively tilted fiber grating coated with gold nanospheres improves the detection limit of Newcastle disease virus,” Biosens. Bioelectron. 100, 169–175 (2018).
M. Lobry, D. Lahem, M. Loyez, M. Debliquy, K. Chah, M. David, and C. Caucheteur, “Non-enzymatic D-glucose plasmonic optical fiber grating biosensor,” Biosens. Bioelectron. 142, 111506 (2019).
Y. Zhang, F. Wang, S. Qian, Z. Liu, Q. Wang, Y. Gu, Z. Wu, Z. Jing, C. Sun, and W. Peng, “A novel fiber optic surface plasmon resonance biosensors with special boronic acid derivative to detect glycoprotein,” Sensors 17, 2259 (2017).
C. Ribaut, M. Loyez, J. Larrieu, S. Chevineau, P. Lambert, M. Remmelink, R. Wattiez, and C. Caucheteur, “Cancer biomarker sensing using packaged plasmonic optical fiber gratings: towards in vivo diagnosis,” Biosens. Bioelectron. 92, 449–456 (2017).
C. Ribaut, V. Voisin, V. Malachovská, V. Dubois, P. Mégret, R. Wattiez, and C. Caucheteur, “Small biomolecule immunosensing with plasmonic optical fiber grating sensor,” Biosens. Bioelectron. 77, 315–322 (2016).
V. Voisin, J. Pilate, P. Damman, P. Mégret, and C. Caucheteur, “Highly sensitive detection of molecular interactions with plasmonic optical fiber grating sensors,” Biosens. Bioelectron. 51, 249–254 (2014).
J. Lao, L. Han, Z. Wu, X. Zhang, Y. Huang, Y. Tang, and T. Guo, “Gold nanoparticle-functionalized surface plasmon resonance optical fiber biosensor: in situ detection of thrombin with 1 nM detection limit,” J. Lightwave Technol. 37, 2748–2755 (2019).
M. Lobry, M. Loyez, E. M. Hassan, K. Chah, M. C. DeRosa, E. Goormaghtigh, R. Wattiez, and C. Caucheteur, “Multimodal plasmonic optical fiber grating aptasensor,” Opt. Express 28, 7539 (2020).
M. Loyez, E. M. Hassan, M. Lobry, F. Liu, C. Caucheteur, R. Wattiez, M. C. DeRosa, W. G. Willmore, and J. Albert, “Rapid detection of circulating breast cancer cells using a multiresonant optical fiber aptasensor with plasmonic amplification,” ACS Sens. 5, 454–463 (2020).
Y. Shevchenko, T. J. Francis, D. A. D. Blair, R. Walsh, M. C. DeRosa, and J. Albert, “In situ biosensing with a surface plasmon resonance fiber grating aptasensor,” Anal. Chem. 83, 7027–7034 (2011).
L. Liu, X. Zhang, Q. Zhu, K. Li, Y. Lu, X. Zhou, and T. Guo, “Ultrasensitive detection of endocrine disruptors via superfine plasmonic spectral combs,” Light Sci. Appl. 10, 181 (2021).
S. E. Hosseini and M. A. Wahid, “Hydrogen production from renewable and sustainable energy resources: promising green energy carrier for clean development,” Renew. Sustain. Energy Rev. 57, 850–866 (2016).
P. Dimitriou and T. Tsujimura, “A review of hydrogen as a compression ignition engine fuel,” Int. J. Hydrogen Energy 42 , 24470–24486 (2017).
A. M. Abdalla, S. Hossain, O. B. Nisfindy, A. T. Azad, M. Dawood, and A. K. Azad, “Hydrogen production, storage, transportation and key challenges with applications: a review,” Energy Convers. Manage. 165, 602–627 (2018).
J. Nakayama, N. Y. Kasai, T. Shibutani, and A. Miyake, “Security risk analysis of a hydrogen fueling station with an on-site hydrogen production system involving methylcyclohexane,” Int. J. Hydrogen Energy 44 , 9110–9119 (2018).
T. Hübert, L. Boon-Brett, G. Black, and U. Banach, “Hydrogen sensors - a review,” Sens. Act. B 157 , 329–352 (2011).
W. J. Buttner, M. B. Post, R. Burgess, and C. Rivkin, “An overview of hydrogen safety sensors and requirements,” Int. J. Hydrogen Energy 36 , 2462–2470 (2011).
Y. N. Zhang, H. Peng, X. Qian, Y. Zhang, G. An, and Y. Zhao, “Recent advancements in optical fiber hydrogen sensors,” Sens. Actuators, B 244, 393–416 (2017).
H. E. Joe, H. Yun, S.-H. Jo, M. B. G. Jun, and B. K. Min, “A review on optical fiber sensors for environmental monitoring,” Int. J. Precis. Eng. Manuf. Technol. 5 , 173–191 (2018).
J. X. Dai, L. Zhu, G. P. Wang, F. Xiang, Y. H. Qin, M. Wang, and M. H. Yang, “Optical fiber grating hydrogen sensors: a review,” Sensors 17 , 577 (2017).
Z. P. Yu, L. Jin, L. H. Chen, J. Li, Y. Ran, and B. O. Guan, “Microfiber Bragg grating hydrogen sensors,” IEEE Photonics Technol. Lett. 27 , 2575–2578 (2015).
S. Silva, L. Coelho, J. M. Almeida, O. Frazao, J. L. Santos, F. X. Malcata, M. Becker, M. Rothhardt, and H. Bartelt, “H2 sensing based on a Pd-coated tapered-FBG fabricated by DUV femtosecond laser technique,” IEEE Photon. Technol. Lett. 25 , 401–403 (2013).
L. Coelho, J. M. M. M. de Almeida, J. L. Santos, and D. Viegas, “Fiber optic hydrogen sensor based on an etched Bragg grating coated with palladium,” Appl. Opt. 54 , 10342–10348 (2015).
Y. H. Yang, F. L. Yang, H. Wang, W. Yang, and W. Jin, “Temperature-insensitive hydrogen sensor with polarization-maintaining photonic crystal fiber-based Sagnac interferometer,” J. Light. Technol 33 , 2566–2571 (2015).
C. Perrotton, R. J. Westerwaal, N. Javahiraly, M. Slaman, H. Schreuders, B. Dam, and P. Meyrueis, “A reliable, sensitive and fast optical fiber hydrogen sensor based on surface plasmon resonance,” Opt. Express 21 , 382–390 (2013).
A. Hosoki, M. Nishiyama, H. Igawa, A. Seki, and K. Watanabe, “A hydrogen curing effect on surface plasmon resonance fiber optic hydrogen sensors using an annealed Au/Ta2O5/Pd multi-layers film,” Opt. Express 22 , 18556–18563 (2014).
R. Tabassum and B. D. Gupta, “Fiber optic hydrogen gas sensor utilizing surface plasmon resonance and native defects of zinc oxide by palladium,” J. Opt. 18 , 015004 (2016).
S. S. Cai, Á González-Vila, X. J. Zhang, T. Guo, and C. Caucheteur, “Palladium-coated plasmonic optical fiber gratings for hydrogen detection,” Opt. Lett. 44 , 4483–4486 (2019).
S. S. Cai, F. Liu, R. L. Wang, Y. G. Xiao, K. W. Li, C. Caucheteur, and T. Guo, “Narrow bandwidth fiber-optic spectral combs for renewable hydrogen detection,” Sci. China Inf. Sci. 63 , 222401 (2020).
Y. Shevchenko, G. Camci-Unal, D. F. Cuttica, M. R. Dokmeci, J. Albert, and A. Khademhosseini, “Surface plasmon resonance fiber sensor for real-time and label-free monitoring of cellular behavior,” Biosens. Bioelectron. 56, 359–367 (2014).
M. Loyez, J. Larrieu, S. Chevineau, M. Remmelink, D. Leduc, B. Bondue, P. Lambert, J. Devière, R. Wattiez, and C. Caucheteur, “In situ cancer diagnosis through online plasmonics,” Biosens. Bioelectron. 131, 104–112 (2019).
R. Delgado-Macuil, K. González-León, and G. Beltrán-Pérez, “Neuropsin (Opn5) detection in the brain tissue of a murine model using long period fiber grating (LPFG),” Opt. Laser Technol. 139, 1–9 (2021).
R. J. Colchester, E. Z. Zhang, C. A. Mosse, P. C. Beard, I. Papakonstantinou, and A. E. Desjardins, “Broadband miniature optical ultrasound probe for high resolution vascular tissue imaging,” Biomed. Opt. Express 6, 1502 (2015).
S. Ohayon, A. Caravaca-Aguirre, R. Piestun, and J. J. DiCarlo, “Minimally invasive multimode optical fiber microendoscope for deep brain fluorescence imaging,” Biomed. Opt. Express 9, 1492 (2018).
J. Desroches, M. Jermyn, M. Pinto, F. Picot, M.-A. Tremblay, S. Obaid, E. Marple, K. Urmey, D. Trudel, G. Soulez, M.-C. Guiot, B. C. Wilson, K. Petrecca, and F. Leblond, “A new method using Raman spectroscopy for in vivo targeted brain cancer tissue biopsy,” Sci. Rep. 8, 1792 (2018).
A. Vernet-Crua, D. Medina-Cruz, E. Mostafavi, A. Benko, J. L. Cholula-Diaz, M. Suravana, H. Vahidi, H. Barabadi, and T. J. Webster, “Nanobiosensors for theranostic applications,” in Handbook on Nanobiomaterials for Therapeutics and Diagnostic Applications (Elsevier, 2021), Chap. 23, pp. 511–543 .
M. Schürmann, G. Cojoc, S. Girardo, E. Ulbricht, J. Guck, and P. Müller, “Three-dimensional correlative single-cell imaging utilizing fluorescence and refractive index tomography,” J. Biophotonics 11 , 1–11 (2018).
T.-L. Liu, S. Upadhyayula, D. E. Milkie, V. Singh, K. Wang, I. A. Swinburne, K. R. Mosaliganti, Z. M. Collins, T. W. Hiscock, J. Shea, A. Q. Kohrman, T. N. Medwig, D. Dambournet, R. Forster, B. Cunniff, Y. Ruan, H. Yashiro, S. Scholpp, E. M. Meyerowitz, D. Hockemeyer, D. G. Drubin, B. L. Martin, D. Q. Matus, M. Koyama, S. G. Megason, T. Kirchhausen, and E. Betzig, “Observing the cell in its native state: imaging subcellular dynamics in multicellular organisms,” Science 360 , 284 (2018).
S. A. Alqarni, W. G. Willmore, J. Albert, and C. W. Smelser, “Self-monitored and optically powered fiber-optic device for localized hyperthermia and controlled cell death in vitro,” Appl. Opt. 60, 2400–2411 (2021).
J. Koppert, H. Jean-Ruel, D. O’Neill, C. Harder, W. Willmore, A. Ianoul, and J. Albert, “Self-heating tilted fiber Bragg grating device for melt curve analysis of solid-phase DNA hybridization and thermal cycling,” Anal. Bioanal. Chem. 411, 6813–6823 (2019).
K. Yang, B. Liu, C. Liao, Y. Wang, Z. Cai, J. Tang, Y. Yang, and Y. Wang, “Highly localized point-by-point fiber Bragg grating for multi-parameter measurement,” J. Lightwave Technol. 39 , 6686–6690 (2021).
K. Yao, Q. Lin, Z. Jiang, N. Zhao, B. Tian, and G. D. Peng, “Joint-peaks demodulation method based on multireflection peaks of a few-mode fiber Bragg grating for reducing sensing error,” Opt. Express 29, 4422–4430 (2021).
Y. Yu, X. Zhang, K. Wang, Z. Wang, H. Sun, Y. Yang, C. Deng, Y. Huang, and T. Wang, “Coexistence of transmission mechanisms for independent multiparameter sensing in a silica capillary-based cascaded structure,” Opt. Express 29, 27938–27950 (2021)..