Brostow W, Datashvili T (2016) Environmental impact of natural polymers. In: Natural polymers. Springer, Berlin, pp 315–338
Akampumuza O et al (2016) Review of the applications of biocomposites in the automotive industry. Polym Compos. doi: 10.1002/pc.23847
Niaounakis M (2015) Automotive applications. In: Biopolymers: applications and trends. William Andrew, Oxford, pp. 257–289
Garlotta DA (2001) Literature review of poly(lactic acid). J Polym Environ 9(2):63–84
Avérous L (2008) Polylactic acid: synthesis, properties and applications. In: Gandini MNB (ed) Monomers, polymers and composites from renewable resources. Elsevier, Amsterdam, pp. 433–450
Maxwell J (1994) Plastics in the automotive industry. Elsevier, Amsterdam
Auras RA et al (2011) Poly(lactic acid): synthesis, structures, properties, processing, and applications, vol 10. Wiley, Hoboken
Reynolds N, Ramamohan AB (2013) High-volume thermoplastic composite technology for automotive structures. In: Advanced composite materials for automotive applications. Wiley, Hoboken, pp 29–50
Rowe J (2012) Advanced materials in automotive engineering. Elsevier, Amsterdam
Götz Klink GR, Znojek B, Wadivkar O (2012) Plastics. The future for automakers and chemical companies. A.T. Kearney, Korea
Swift TK, Moore M, Sanchez E (2015) Plastics and polymer composites in light vehicles. Economics and Statistics Department/American Chemistry Council
Philp JC et al (2013) Biobased plastics in a bioeconomy. Trends Biotechnol 31(2):65–67
Thielen M (2012) Bioplastics: basics, applications, markets. Polymedia, Mönchengladbach
Pilla S (2011) Handbook of bioplastics and biocomposites engineering applications, vol 81. Wiley, Hoboken
Siracusa V et al (2008) Biodegradable polymers for food packaging: a review. Trends Food Sci Technol 19(12):634–643
European Bioplastics (2013) Applications for bioplastics. European Bioplastics, Berlin. http://www.european-bioplastics.org/market/applications-sectors/
Lee E, Flanigan C (2012) Automotive plastics and composites. In: Encyclopedia of polymer science and technology. Wiley, Hoboken
Szeteiová K (2010) Automotive materials: plastics in automotive markets today. Institute of Production Technologies, Slovak University of Technology, Bratislava
Andrea DJ, Brown WR (1993) Material selection processes in the automotive industry. OSAT, Michigan
Ghassemieh E (2011). Materials in automotive application, state of the art and prospects. In: Chiaberge M (ed) New trends and developments in automotive industry. Intech, Rijeka, pp 366–394. doi: 10.5772/13286
Weber M, Weisbrod J (2003) Requirements engineering in automotive development-experiences and challenges. In: IEEE joint international conference on requirements engineering, 2002. IEEE, pp 331–340. doi: 10.1109/MS.2003.1159025
Biron M (2012) Thermoplastics and thermoplastic composites. William Andrew, Oxford
Babu RP et al (2013) Current progress on bio-based polymers and their future trends. Prog Biomater 2(1):1–16
Fiori S (2014) Industrial uses of PLA. In: Jiménez A, Peltzer M, Ruseckaite R (eds) Poly(lactic acid) science and technology: processing, properties, additives and applications. Royal Society of Chemistry, London, pp 315–333. doi: 10.1039/9781782624806-00315
Lunt J (1998) Large-scale production, properties and commercial applications of polylactic acid polymers. Polym Degrad Stab 59(1–3):145–152
Signori F et al (2009) Thermal degradation of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and their blends upon melt processing. Polym Degrad Stab 94(1):74–82
Song J et al (2009) Biodegradable and compostable alternatives to conventional plastics. Philos Trans R Soc Lond B Biol Sci 364(1526):2127–2139
Vink ET et al (2007) Original research: the eco-profiles for current and near-future NatureWorks® polylactide (PLA) production. Ind Biotechnol 3(1):58–81
Jamshidian M et al (2010) Poly-lactic acid: production, applications, nanocomposites, and release studies. Compr Rev Food Sci Food Saf 9(5):552–571
Sin LT et al (2012) Polylactic acid: PLA biopolymer technology and applications. William Andrew, Oxford
Dusselier M et al (2015) Shape-selective zeolite catalysis for bioplastics production. Science 349(6243):78–80
Achmad F et al (2009) Synthesis of polylactic acid by direct polycondensation under vacuum without catalysts, solvents and initiators. Chem Eng J 151(1–3):342–350
Gerrard J, Kandlikar M (2007) Is European end-of-life vehicle legislation living up to expectations? Assessing the impact of the ELV directive on ‘green’ innovation and vehicle recovery. J Clean Prod 15(1):17–27
Madhavan Nampoothiri K et al (2010) An overview of the recent developments in polylactide (PLA) research. Bioresour Technol 101(22):8493–8501
Nova Institute (2012) Growth in PLA bioplastics: a production capacity of over 800,000 tonnes expected by 2020. Bio-based News, 7 Aug 2012
Bhardwaj R, Mohanty AK (2007) Advances in the properties of polylactides based materials: a review. J Biobased Mater Bioenergy 1(2):191–209
Canessa E et al (2013) Low-cost 3D printing for science, education and sustainable development. ICPT, Trieste. http://sdu.ictp.it/3D/book.html
Campbell T et al (2011) Could 3D printing change the world. Technologies, potential, and implications of additive manufacturing. Atlantic Council, Washington
Reeves P, Mendis D (2015) The current status and impact of 3D printing within the industrial sector: an analysis of six case studies. Intellectual Property Office, Newport
Staff S (2014) Revolutionary new electric car built and tested in one year with Objet1000 multi-material 3D production system. Stratasys. http://blog.stratasys.com/2014/11/18/streetscooter-3d-printing/. Accessed 14 Jan 2016
Bunkley N (2014) “World’s first” 3D printed car created and driven by Local Motors. Automotive News. http://www.autonews.com/article/20141027/OEM06/310279987/auto-industry-uses-3-d-printing-heavily-in-product-development. Accessed 14 Jan 2016
Wypych G (2012) Handbook of plasticizers, 2nd edn. William Andrew, Boston
Ljungberg N, Wesslén B (2005) Preparation and properties of plasticized poly(lactic acid) films. Biomacromolecules 6(3):1789–1796
Liu H, Zhang J (2011) Research progress in toughening modification of poly(lactic acid). J Polym Sci B Polym Phys 49(15):1051–1083
Ruellan A et al (2015) Plasticization of poly(lactide). In: Jiménez A, Peltzer M, Ruseckaite R (eds) Poly(lactic acid) science and technology: processing, properties, additives and applications. The Royal Society of Chemistry, London, pp. 124–170
Jacobsen S, Fritz HG (1999) Plasticizing polylactide—the effect of different plasticizers on the mechanical properties. Polym Eng Sci 39(7):1303–1310
Murariu M et al (2008) Polylactide (PLA) designed with desired end-use properties: 1. PLA compositions with low molecular weight ester-like plasticizers and related performances. Polym Adv Technol 19(6):636–646
Zhang H et al (2013) Thermal, mechanical, and rheological properties of polylactide/poly(1,2-propylene glycol adipate). Polym Eng Sci 53(1):112–118
Ren Z et al (2006) Dynamic mechanical and thermal properties of plasticized poly(lactic acid). J Appl Polym Sci 101(3):1583–1590
Wojciechowska P (2012) The effect of concentration and type of plasticizer on the mechanical properties of cellulose acetate butyrate organic-inorganic hybrids. In: Luqman M (ed) Recent advances in plasticizers. Intech, Rijeka, pp. 141–164
Suvorova AI et al (1993) Chemical structure of plasticizers, compatibility of components and phase equilibrium in plasticized cellulose diacetate. Makromol Chem Rapid 194(5):1315–1321
Notta-Cuvier D et al (2015) Tailoring polylactide properties for automotive applications: effects of co-addition of halloysite nanotubes and selected plasticizer. Macromol Mater Eng. doi: 10.1002/mame.201500032
Kfoury G et al (2013) Recent advances in high performance poly (lactide): from “green” plasticization to super-tough materials via (reactive) compounding. Front Chem 1:1
Sangeetha VH et al (2016) State of the art and future prospectives of poly(lactic acid) based blends and composites. Polym Compos. doi: 10.1002/pc.23906
Odent J et al (2015) Highly toughened polylactide-based materials through melt-blending techniques. In: Biodegradable polyesters. Wiley-VCH, Weinheim, pp. 235–274
Anderson KS et al (2008) Toughening polylactide. Polym Rev 48(1):85–108
Hongzhi L, Jinwen Z (2012) Toughening Modification of Poly(lactic acid) via melt blending. In: Biobased monomers, polymers, and material. ACS Symposium Series, vol 1105, pp 27–46
Detyothin S et al (2010) Poly(lactic acid) blends. In: Poly(lactic acid). Wiley, Hoboken, pp. 227–271
Perkins WG (1999) Polymer toughness and impact resistance. Polym Eng Sci 39(12):2445–2460
Liu Z-W et al (2014) Mechanical and thermal properties of thermoplastic polyurethane-toughened polylactide-based nanocomposites. Polym Compos 35(9):1744–1757
Taib RM et al (2012) Thermal, mechanical, and morphological properties of polylactic acid toughened with an impact modifier. J Appl Polym Sci 123(5):2715–2725
Bouzouita A et al (2016) Design of highly tough poly(l-lactide)-based ternary blends for automotive applications. J Appl Polym Sci. doi: 10.1002/app.43402
Notta-Cuvier D et al (2014) Tailoring polylactide (PLA) properties for automotive applications: effect of addition of designed additives on main mechanical properties. Polym Test 36(0):1–9
Zhang K et al (2014) Supertoughened renewable PLA reactive multiphase blends system: phase morphology and performance. ACS Appl Mater Interface 6(15):12436–12448u
Zhang C et al (2013) Thermal, mechanical and rheological properties of polylactide toughened by expoxidized natural rubber. Mater Des 45:198–205
Pattamaprom C et al (2016) Improvement in impact resistance of polylactic acid by masticated and compatibilized natural rubber. Iran Polym J 25(2):169–178
Pongtanayut K et al (2013) The effect of rubber on morphology, thermal properties and mechanical properties of PLA/NR and PLA/ENR blends. Energy Procedia 34:888–897
Desa M et al (2015) Mechanical and thermal properties of rubber toughened poly(lactic acid). In: Advanced materials research, vol 1125. Trans Tech Publications, pp 222–226
Sun Y, He C (2013) Biodegradable “core–shell” rubber nanoparticles and their toughening of poly(lactides). Macromolecules 46(24):9625–9633
Odent J et al (2013) Toughening of polylactide by tailoring phase-morphology with P[CL-co-LA] random copolyesters as biodegradable impact modifiers. Eur Polym J 49(4):914–922
Meyva Y, Kaynak C (2015) Toughening of polylactide by bio-based and petroleum-based thermoplastic elastomers. Int Polym Process 30(5):593–602
Li Y, Shimizu H (2007) Toughening of polylactide by melt blending with a biodegradable poly(ether) urethane elastomer. Macromol Biosci 7(7):921–928
Todo M, Takayama T (2014) Fracture mechanisms of biodegradable PLA and PLA/PCL blends. In: Pignatello R (ed) Biomaterials – physics and chemistry. InTech, Rijeka, pp 375–394
Todo M, Takayama T (2007) Toughening of bioabsorbable polymer blend by microstructural modification. In: Watanabe M, Okuno O, Sasaki K, Takahashi N, Suzuki O, Takada H (eds) Proceedings of the 2nd international symposium for Interface oral health science, Sendai, Japan, 18–19 February, 2007. Springer Japan, Tokyo, pp. 95–104
Turng L-S, Srithep Y (2014) Annealing conditions for injection molded poly (lactic acid). Society of Plastics Engineers (SPE). doi: 10.2417/spepro.005392. http://www.4spepro.org/pdf/005392/005392.pdf
Grijpma DW et al (2002) Improvement of the mechanical properties of poly(D,L-lactide) by orientation. Polym Int 51(10):845–851
Carrasco F et al (2010) Processing of poly(lactic acid): characterization of chemical structure, thermal stability and mechanical properties. Polym Degrad Stab 95(2):116–125
Nascimento L et al (2010) Effect of the recycling and annealing on the mechanical and fracture properties of poly(lactic acid). J Polym Environ 18(4):654–660
Gámez-Pérez J et al (2011) Fracture behavior of quenched poly (lactic acid). Express Polym Lett 5(1):82–91
Yang G et al (2012) Toughening of poly (L-lactic acid) by annealing: the effect of crystal morphologies and modifications. J Macromol Sci B 51(1):184–196
Perego G et al (1996) Effect of molecular weight and crystallinity on poly(lactic acid) mechanical properties. J Appl Polym Sci 59(1):37–43
Cocca M et al (2011) Influence of crystal polymorphism on mechanical and barrier properties of poly(l-lactic acid). Eur Polym J 47(5):1073–1080
Edenhofer B et al (2006) The flexible heat treatment of automotive components in a novel type of pusher furnace. La Metallurgia Italiana (2):39–45. http://www.fracturae.com/index.php/aim/article/download/633/602
Funatani K (2004) Heat treatment of automotive components: current status and future trends. Trans Indian Inst Metals 57(4):381–396
Johnson RW et al (2004) The changing automotive environment: high-temperature electronics. IEEE Trans Electron Packag Manuf 27(3):164–176
ASTM (2016) ASTM standard test method for deflection temperature of plastics under flexural load in the edgewise position. ASTM. http://www.astm.org/Standards/D648.htm
Huda MS et al (2006) Wood-fiber-reinforced poly(lactic acid) composites: evaluation of the physicomechanical and morphological properties. J Appl Polym Sci 102(5):4856–4869
Shih Y-F, Huang C-C (2011) Polylactic acid (PLA)/banana fiber (BF) biodegradable green composites. J Polym Res 18(6):2335–2340
Lee B-H et al (2009) Bio-composites of kenaf fibers in polylactide: role of improved interfacial adhesion in the carding process. Compos Sci Technol 69(15–16):2573–2579
Shi QF et al (2012) Influence of heat treatment on the heat distortion temperature of poly(lactic acid)/bamboo fiber/talc hybrid biocomposites. J Appl Polym Sci 123(5):2828–2836
Chanda M, Roy SK (2008) Industrial polymers, specialty polymers, and their applications, vol 74. CRC, Boca Raton
Coelho MC et al (2012) Nanotechnology in automotive industry: research strategy and trends for the future—small objects, big impacts. J Nanosci Nanotechnol 12(8):6621–6630
Mai Y-W, Yu Z-Z (2006) Polymer nanocomposites. Woodhead, Cambridge
Huang J-W et al (2009) Polylactide/nano and microscale silica composite films. I. Preparation and characterization. J Appl Polym Sci 112(3):1688–1694
Frone AN et al (2011) Cellulose fiber-reinforced polylactic acid. Polym Compos 32(6):976–985
Li ZQ et al (2010) Preparation and characterization of bacterial cellulose/polylactide nanocomposites. Polym-Plast Technol Eng 49(2):141–146
Shameli K et al (2010) Silver/poly(lactic acid) nanocomposites: preparation, characterization, and antibacterial activity. Int J Nanomedicine 5:573–579
Xu X et al (2006) Biodegradable electrospun poly(l-lactide) fibers containing antibacterial silver nanoparticles. Eur Polym J 42(9):2081–2087
González A et al (2012) Fire retardancy behavior of PLA based nanocomposites. Polym Degrad Stab 97(3):248–256
Sinha Ray S, Okamoto M (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28(11):1539–1641
Alexandre M, Dubois P (2000) Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater Sci Eng R Rep 28(1–2):1–63
Sinha Ray S, Bousmina M (2005) Biodegradable polymers and their layered silicate nanocomposites: in greening the 21st century materials world. Prog Mater Sci 50(8):962–1079
Kurauchi T et al (1991) Nylon 6-clay hybrid-synthesis, properties and application to automotive timing belt cover. SAE Technical Paper 910584. doi: 10.4271/910584
Paul M-A et al (2003) Exfoliated polylactide/clay nanocomposites by In-situ coordination–insertion polymerization. Macromol Rapid Commun 24(9):561–566
Khankrua R et al (2013) Thermal and mechanical properties of biodegradable polyester/silica nanocomposites. Energy Procedia 34:705–713109
Murariu M et al (2010) New trends in polylactide (PLA)-based materials: “green” PLA–calcium sulfate (nano)composites tailored with flame retardant properties. Polym Degrad Stab 95(3):374–381
Sinha Ray S et al (2003) New polylactide-layered silicate nanocomposites. 2. Concurrent improvements of material properties, biodegradability and melt rheology. Polymer 44(3):857–866
Pilla S et al (2010) Microcellular processing of polylactide–hyperbranched polyester–nanoclay composites. J Mater Sci 45(10):2732–2746
Ameli A et al (2014) Development of high void fraction polylactide composite foams using injection molding: mechanical and thermal insulation properties. Compos Sci Technol 90:88–95
Pilla S et al (2007) Solid and microcellular polylactide-carbon nanotube nanocomposites. Int Polym Process 22(5):418–428
Kramschuster A et al (2007) Injection molded solid and microcellular polylactide compounded with recycled paper shopping bag fibers. Int Polym Process 22(5):436–445
Seo J-H et al (2012) Combined effects of chemical and microcellular foaming on foaming characteristics of PLA (poly lactic acid) in injection molding process. Polym-Plast Technol Eng 51(5):455–460
Harris AM, Lee EC (2006) Injection molded polylactide (PLA) composites for automotive applications. SPE ACCE Paper Draft 62906
Najafi Chaloupli N (2015) Development of polylactide (PLA) and PLA nanocomposite foams in injection molding for automotive applications. Doctoral dissertation, École Polytechnique de Montréal
NatureWorks (2007) Technology focus report: blends of PLA with other thermoplastics. NatureWorks, Minnetonka
Guo X et al (2015) Poly(lactic acid)/polyoxymethylene blends: morphology, crystallization, rheology, and thermal mechanical properties. Polymer 69:103–109
Hashima K et al (2010) Structure-properties of super-tough PLA alloy with excellent heat resistance. Polymer 51(17):3934–3939
Wang Y et al (2012) Improvement in toughness and heat resistance of poly(lactic acid)/polycarbonate blend through twin-screw blending: influence of compatibilizer type. J Appl Polym Sci 125(S2):E402–E412
Lin L et al (2015) Improving the impact property and heat-resistance of PLA/PC blends through coupling molecular chains at the interface. Polym Adv Technol 26(10):1247–1258
Lin L et al (2015) Super toughened and high heat-resistant poly(lactic acid) (PLA)-based blends by enhancing interfacial bonding and PLA phase crystallization. Ind Eng Chem Res 54(21):5643–5655
Srithep Y et al (2014) Processing and characterization of poly(lactic acid) blended with polycarbonate and chain extender. J Polym Eng 34:665–672
Eguiburu JL et al (1998) Blends of amorphous and crystalline polylactides with poly(methyl methacrylate) and poly(methyl acrylate): a miscibility study. Polymer 39(26):6891–6897
Li S-H, Woo EM (2008) Immiscibility–miscibility phase transitions in blends of poly(L-lactide) with poly(methyl methacrylate). Polym Int 57(11):1242–1251
Samuel C et al (2013) PLLA/PMMA blends: a shear-induced miscibility with tunable morphologies and properties? Polymer 54(15):3931–3939
Zhang G et al (2003) Miscibility and phase structure of binary blends of polylactide and poly(methyl methacrylate). J Polym Sci B Polym Phys 41(1):23–30
Tsuji H (2007) Poly(lactide) stereocomplexes: formation, structure, properties, degradation, and applications. Macromol Biosci 7(12):1299–1299
Ikada Y et al (1987) Stereocomplex formation between enantiomeric poly(lactides). Macromolecules 20(4):904–906
Tsuji H et al (1991) Stereocomplex formation between enantiomeric poly(lactic acid)s. 4. Differential scanning calorimetric studies on precipitates from mixed solutions of poly(D-lactic acid) and poly(L-lactic acid). Macromolecules 24(20):5657–5662
Torres L et al (2016) Effect of multi-branched PDLA additives on the mechanical and thermomechanical properties of blends with PLLA. J Appl Polym Sci 133(1). doi: 10.1002/app.42858
Zou J et al (2012) Effects of poly (D-lactide acid) on the properties of crystallization and thermal behavior of poly (L-lactide acid). Adv Info Sci Service Sci 4(10):382
Oyama HT, Abe S (2015) Stereocomplex poly(lactic acid) alloys with superb heat resistance and toughness. ACS Sustain Chem Eng 3(12):3245–3252
Sun B et al (2016) Enhanced toughness and strength of poly (d-lactide) by stereocomplexation with 5-arm poly (l-lactide). J Appl Polym Sci 133(1). doi: 10.1002/app.42857
Nam B-U, Lee B-S (2012) Toughening of PLA stereocomplex by impact modifiers. J Korea Acad Industr Coop Soc 13(2):919–925
Corbion Purac (2015) high heat PLA: unlocking bioplastic potential for durable applications. http://www.corbion.com/media/77166/corbion-puracpla-high-heat-themesheet.pdf. Accessed Jan 2016
Min BH (2003) A study on quality monitoring of injection-molded parts. J Mater Process Technol 136(1–3):1–6
Spina R (2004) Injection moulding of automotive components: comparison between hot runner systems for a case study. J Mater Process Technol 155–156:1497–1504
Lim LT et al (2008) Processing technologies for poly(lactic acid). Prog Polym Sci 33(8):820–852
Mazumder SK (ed) (2002) Composites manufacturing, materials, product and process engineering. CRC Taylor & Francis, London. ISBN 0-8493-0585-3
Harris AM, Lee EC (2008) Improving mechanical performance of injection molded PLA by controlling crystallinity. J Appl Polym Sci 107(4):2246–2255
Li M et al (2010) Nonisothermal crystallization kinetics of poly(lactic acid) formulations comprising talc with poly(ethylene glycol). Polym Eng Sci 50(12):2298–2305
Urayama H et al (2003) Controlled crystal nucleation in the melt-crystallization of poly(l-lactide) and poly(l-lactide)/poly(d-lactide) stereocomplex. Polymer 44(19):5635–5641
Petchwattana N et al (2014) Influence of talc particle size and content on crystallization behavior, mechanical properties and morphology of poly (lactic acid). Polym Bull 71(8):1947–1959
Zhou J et al (2013) Synthesis and characterization of triblock copolymer PLA-b-PBT-b-PLA and its effect on the crystallization of PLA. RSC Adv 3(40):18464–18473
Shi X et al (2015) Synergistic effects of nucleating agents and plasticizers on the crystallization behavior of poly (lactic acid). Molecules 20(1):1579–1593
Schmidt SC, Hillmyer MA (2001) Polylactide stereocomplex crystallites as nucleating agents for isotactic polylactide. J Polym Sci B Polym Phys 39(3):300–313
NEC (2006) NEC & UNITIKA Realize bioplastic reinforced with Kenaf fiber for mobile phone use. http://www.nec.co.jp/press/en/0603/2001.html
Fujitsu Limited, Fujitsu Laboratories Ltd.,Toray Industries, Inc. (2005) Fujitsu and Toray develop world’s first environmentally-friendly large-size plastic housing for notebook PCs [Press release]. Retrieved from http://www.fujitsu.com/global/about/resources/news/press-releases/2005/0113-01.html
Harris AM, Lee EC (2010) Heat and humidity performance of injection molded PLA for durable applications. J Appl Polym Sci 115(3):1380–1389
Finniss A (2014) Polylactic acid-based polymer blends for durable applications. West Virginia University, Morgantown
Harris AM, Lee EC (2013) Durability of polylactide-based polymer blends for injection-molded applications. J Appl Polym Sci 128(3):2136–2144
Jiménez A et al (2014) Poly (lactic acid) science and technology: processing, properties, additives and applications, vol 12. Royal Society of Chemistry, London
Toyota Motor Corporation (2000) Utilising plant-derived materials in automotive interior parts. http://www.toyota-boshoku.com/global/about/development/eco/index.html. Accessed 19 Feb 2016
Toyota Motor Corporation (2008) Toyota to increase ‘ecological plastic’ in vehicle interiors. http://www.toyota.co.jp/en/news/08/1217.html. Accessed 21 Feb 2016
Thielen M (2010) Hyundai Blue-Will concept to feature PLA and PA 11. Bioplastics Magazine, Jan/Feb 2010
Motors M (2006) Mitsubishi Motors develops plant-based green plastic floor mat. http://www.mitsubishi-motors.com/en/corporate/pressrelease/corporate/detail1475.html. Accessed 20 Feb 016
Corbion Purac (2013) PLA bioplastics: a driving force in automotive. Corbion Purac. http://www.corbion.com/bioplastics/pla-markets/automotive. Accessed 05 Jan 2016
Kitamura H (2007) Teijin Launches BIOFRONT heat-resistant bioplastic - 100% BIOFRONT car seat fabrics developed with Mazda
Ramaswamy S, Aslan B, Gries T, Urbanus M (2015) Biobased thermoplastic composites for automotive interiors. Bioplastics Magazine, Jan/Feb 2015
Aslan B et al (2012) Bio-composites: processing of thermoplastic biopolymers and industrial natural fibres from Staple fibre blends up to fabric for composite applications. J Textile Eng 19(85)
Ichhaporia PK (2008) Composites from natural fibers. Dissertation, North Carolina State University, Raleigh
Ampro Verdù Solis A (2015) New biobased fibres for automotive interior applications. Bioplastics Magazine, Sept/Oct 2015
Wambua P et al (2003) Natural fibres: can they replace glass in fibre reinforced plastics? Compos Sci Technol 63(9):1259–1264
Koronis G et al (2013) Green composites: a review of adequate materials for automotive applications. Compos Part B 44(1):120–127
Edana (2013) Nonwovens in automotive applications. Edana, Brussels. http://www.edana.org/discover-nonwovens/products-applications/automotive
