Avérous, L. (2004) J. Macromol. Sci. Part C, 44, 231-274.
Bastioli, C. (2005) Handbook of Biodegradable Polymers, Rapra Technology.
Avérous, L. and Pollet, E. (2012) in Environmental Silicate NanoBiocomposites (eds L. Avérous and E. Pollet), Springer, London, pp. 13-39.
Fritz, J., Link, U., and Braun, R. (2001) Starch - Stärke, 53, 105-109.
Narayan, R. (2009) Fundamental principles and concepts of biodegrad-ability - sorting through the facts, hypes, and claims of biodegradable plastics in the marketplace. Bioplastics Magazine, 4, January 2009, pp. 4/28-4/31.
BPI (2013) Confused by the terms Biodegradable & Biobased, September 20, 2013.
Mohanty, A.K., Misra, M., and Drzal, L.T. (2002) J. Polym. Environ., 10, 19-26.
Wolf, M.-A., Baitz, M., and Kreissig, J. (2010) in Polymers - Opportunities and Risks II (eds P. Eyerer, M. Weller, and C. Hübner), Springer, Berlin, Heidelberg, pp. 1-53.
Compounding World (2013) Bio-focus turns to durability, pp. 31-36.
Avérous, L. (2008) in Monomers, Polymers and Composites from Renewable Resources (eds B. Mohamed Naceur and G. Alessandro), Elsevier, Amsterdam, pp. 433-450.
Vert, M., Schwarch, G., and Coudane, J. (1995) J. Macromol. Sci. Part A, 32, 787-796.
Babu, R., O'Connor, K., and Seeram, R. (2013) Prog. Biomater., 2, 8.
Gandini, A. (2008) Macromolecules, 41, 9491-9504.
Groot, W. and Borén, T. (2010) Int. J. Life Cycle Assess., 15, 970-984.
Bucknall, C.B. (2007) J. Polym. Sci., Part B: Polym. Phys., 45, 1399-1409.
Könczöl, L., Döll, W., and Michler, G.H. (1992) Colloid. Polym. Sci., 270, 972-981.
O'Connell, P.A. and McKenna, G.B. (2002) Yield and crazing in polymers, in Encyclopedia of Polymer Science and Technology, John Wiley & Sons, Inc., New York.
Ikeda, R.M. (1993) J. Appl. Polym. Sci., 47, 619-629.
Seelig, T. and Van der Giessen, E. (2009) Comput. Mater. Sci., 45, 725-728.
Dompas, D. and Groeninckx, G. (1994) Polymer, 35 (22), 4743-4749.
Lu, F., Cantwell, W.J., and Kausch, H.H. (1997) J. Mater. Sci., 32, 3055-3059.
Lazzeri, A. and Bucknall, C.B. (1993) J. Mater. Sci., 28, 6799-6808.
Bucknall, C.B. and Paul, D.R. (2013) Polymer, 54, 320-329.
Deblieck, R.A.C., van Beek, D.J.M., Remerie, K., and Ward, I.M. (2011) Polymer, 52, 2979-2990.
Han, L., Han, C., and Dong, L. (2013) Polym. Compos., 34, 122-130.
NatureWorks (2007) Technology Focus Report: Blends of PLA with Other Thermoplastics, http://www.natureworksllc.com//media/technical_resources/properties_documents/propertiesdocument_blends-of-ingeo-with-other-thermoplastics_pdf.pdf (accessed 03 October 2013).
Arkema (2013) Acrylic Block Copolymers for Pressure Sensitive Adhesives, http://www.pstc.org/files/public/LebouvierDan.pdf (accessed 05 November 2013).
Rohm§Haas (2008) Addit. Polym., 2008, 1-2.
Rohm§Haas PARALOID™ KM-355 Acrylic Impact Modifier For Weatherable Vinyl Building Application, http://www.dow.com/assets/attachments/business/pbm/paraloid_km/paraloid_km-355/tds/paraloid_km-355.pdf (accessed 05 November 2013).
Rhom§Haas (2007) Addit. Polym., 2007, Rhom&Haas4.
Dow (2010) Dow Introduces New Generation Impact Modifier for PLA and PLA Blends http://www.sustainableplastics.org/news/dow-introduces-new-generation-impact-modifier-pla-andpla-blends (accessed 05 November 2013).
Dow (2010) PARALOID™ BPM-515 Acrylic Impact Modifier for Polyactic Acid Resin, http://www.dow.com/assets/attachments/business/plastics_additives/paraloid_bpm/paraloid_bpm-515/tds/paraloid_bpm-515.pdf (accessed 05 November 2013).
Dow (2010) Polaroid BPM-520 Impact Modifier: Weatherable Impact Modifier for Engineering Resins, http://www.dow.com/assets/attachments/business/plastics_additives/paraloid_exl/paraloid_exl-2314/tds/paraloid_exl-2314.pdf (accessed 05 November 2013).
PolyOne and Dow (2011) Dow and PolyOne Introduce New Generation Impact Modifier for PLA, http://www.polyone.com/en-us/news/Press%20Release%20Attachments/Dow%20PolyOne%20OnCap%20BIO%20L%20joint%20release.pdf (accessed 05 November 2013).
PolyOne (2010) New Transparent Impact Modifier from PolyOne Expands Potential of PLA Biopolymer, http://www.polyone.com/en-us/news/Press%20Release%20Attachments/Chinaplas%20OnCap%20BIO%
Vandebril, S., Vermant, J., and Moldenaers, P. (2010) Soft Matter, 6, 3353-3362.
Cai, X., Li, B., Pan, Y., and Wu, G. (2012) Polymer, 53, 259-266.
Dharaiya, D.P. and Jana, S.C. (2005) J. Polym. Sci., Part B: Polym. Phys., 43, 3638-3651.
Bitinis, N., Verdejo, R., Maya, E.M., Espuche, E., Cassagnau, P., and Lopez-Manchado, M.A. (2012) Compos. Sci. Technol., 72, 305-313.
Balakrishnan, H., Hassan, A., Wahit, M.U., Yussuf, A.A., and Razak, S.B.A. (2010) Mater. Des., 31, 3289-3298.
As'habi, L., Jafari, S.H., Khonakdar, H.A., Häussler, L., Wagenknecht, U., and Heinrich, G. (2013) Thermochim. Acta, 565, 102-113.
As'habi, L., Jafari, S.H., Khonakdar, H.A., Boldt, R., Wagenknecht, U., and Heinrich, G. (2013) eXPRESS Polym. Lett., 7, 21-39.
As'habi, L., Jafari, S.H., Khonakdar, H.A., Kretzschmar, B., Wagenknecht, U., and Heinrich, G. (2013) J. Appl. Polym. Sci., 130, 749-758.
Chen, G.-X., Kim, H.-S., Kim, E.-S., and Yoon, J.-S. (2005) Polymer, 46, 11829-11836.
Chen, G.-X. and Yoon, J.-S. (2005) J. Polym. Sci., Part B: Polym. Phys., 43, 478-487.
Wen, X., Lin, Y., Han, C., Han, L., Li, Y., and Dong, L. (2010) Macromol. Mater. Eng., 295, 415-419.
Baouz, T., Rezgui, F., and Yilmazer, U. (2013) J. Appl. Polym. Sci., 128, 3193-3204.
Jiang, L., Liu, B., and Zhang, J. (2009) Ind. Eng. Chem. Res., 48, 7594-7602.
Liu, T., Yu, F., Yu, X., Zhao, X., Lu, A., and Wang, J. (2012) J. Appl. Polym. Sci., 125, 1292-1301.
Leu, Y.Y., Mohd Ishak, Z.A., and Chow, W.S. (2012) J. Appl. Polym. Sci., 124, 1200-1207.
Nuñez, K., Rosales, C., Perera, R., Villarreal, N., and Pastor, J.M. (2012) Polym. Eng. Sci., 52, 988-1004.
PolyOne (2008) OnCapTM BIO Impact T: Transparent Impact Modifi er for Polylactic Acid http://www.polyone.com/enus/docs/Documents/OnCap%20BIO%201mpact%20T.pdf (accessed 03 November 2013).
Sukano (2010) Bio Goes Functional: Sukano Biobased Masterbatches Put Performance into PLA (accessed 03 November 2013).
Scaffaro, R., Morreale, M., Mirabella, F., and La Mantia, F.P. (2011) Macromol. Mater. Eng., 296, 141-150.
Murariu, M., Ferreira, A.D.S., Duquesne, E., Bonnaud, L., and Dubois, P. (2008) Macromol. Symp., 272, 1-12.
Vegt, A.K. and Elmendorp, J.J. (1986) in Integration of Fundamental Polymer Science and Technology (eds L.A. Kleintjens and P.J. Lemstra), Springer, pp. 381-389.
Koning, C., Van Duin, M., Pagnoulle, C., and Jerome, R. (1998) Prog. Polym. Sci., 23, 707-757.
Lorenzo, D.L.M. (1997) in Compatibilization Criteria and Procedures for Binary Blends: A Review (ed M. Frigione), Freund, Tel Aviv.
Kim, J.K., Kim, S., and Park, C.E. (1997) Polymer, 38, 2155-2164.
Fortelný, I. (2004) Eur. Polym. J., 40, 2161-2166.