Demarbaix, A., Rivière, E., Ducobu, F., Dolimont, A., Petit, F., & Juste, E. (03 June 2019). Calibration method of hybrid machining process in the green ceramic combining micro-milling and laser machining [Poster presentation]. 19th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2019. |
![]() ![]() | Dolimont, A., Santos Macias, J. G., Lv, Z., Simar, A., & Rivière, E. (29 May 2019). Comparing residual stresses in metal powder bed additive manufacturing (SLM and EBM) [Paper presentation]. 4th Workshop in AM, Leuven, Belgium. |
Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (2018). Functionalization of Electron BeamMelting parts in order to guide finishing operations [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/23478 |
![]() ![]() | Dolimont, A., Rivière, E., Ducobu, F., & Backaert, S. (02 May 2018). Impact of chemical polishing on surface roughness and dimensional quality of electron beam melting process (EBM) parts. AIP Conference Proceedings, 1960 (140007). doi:10.1063/1.5034999 ![]() |
Dolimont, A., Rivière, E., Ducobu, F., & Backaert, S. (23 April 2018). Impact of chemical polishing on surface roughness and dimensional quality of electron beam melting process (EBM) parts [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. |
Demarbaix, A., Dolimont, A., Ducobu, F., Equeter, L., Huynh, H., Leroy, C., Ozcan, A., & Rivière, E. (07 March 2018). Manumons [Poster presentation]. 1ère journée doctorale transfontalière, Reims Champagne-Ardenne , France. |
![]() ![]() | Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (16 October 2017). Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters. AIP Conference Proceedings, 1896. doi:10.1063/1.5008036 ![]() |
![]() ![]() | Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 June 2017). Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters [Paper presentation]. workshop additive manufacturing, Louvain-la-Neuve, UCL, Belgium. ![]() |
![]() ![]() | De Formanoir, C., Brulard, A., Vivès, S., Guilhem, M., Prima, F., Michotte, S., Rivière, E., Dolimont, A., & Godet, S. (04 June 2017). A strategy to improve the work-hardening behavior of Ti-6Al-4V parts produced by additive manufacturing. Materials Research Letters, 5 (4), 201-208. doi:10.1080/21663831.2016.1245681 ![]() |
![]() ![]() | Demarbaix, A., Dolimont, A., & Ducobu, F. (2017). Les fabrications par faisceaux ou comment la lumière participe au façonnage d'une pièce mécanique. Polytech-News, n°55. |
Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (26 April 2017). Influence on surface characteristics of electron beam melting process (EBM) by varying the process parameters [Paper presentation]. 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. |
![]() ![]() | Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (07 March 2017). Influence of process parameters on surface roughness of EBM [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgique, 2017, Mons, Belgium. |
![]() ![]() | Leroy, C., Wattiaux, D., Dolimont, A., & Rivière, E. (07 March 2017). L'impression 3D comme outil d'aide dans un cours de géométrie [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium. |
![]() ![]() | Demarbaix, A., Dolimont, A., Ducobu, F., Equeter, L., Huynh, H., Leroy, C., Ozcan, A., & Rivière, E. (07 March 2017). Manumons: An informal research group gathering the researc activities linked to the manufacturing technologies [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium. |
![]() ![]() | Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (19 October 2016). Effect of HIPping (Hot Isostatic Pressing) on Electron Beam Melting Ti6Al4V parts after machining. AIP Conference Proceedings, 1769. doi:10.1063/1.4963616 ![]() |
Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (05 July 2016). Study of the functionalization of electron beam melting part through machining [Paper presentation]. 3rd Researcher's Day of the Materials Research Institute, University of Mons, Belgium. |
![]() ![]() | Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (2016). Characterization of electron beam melting process (EBM) : Capability approach. Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing. ![]() |
Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 June 2016). Characterization of electron beam melting process (EBM) : Capability approach [Paper presentation]. ASPE/euspen 2016 Summer Topical Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing. |
De Formanoir, C., Godet, S., Michotte, S., & Dolimont, A. (2016). Electron Beam Melting of Ti-6Al-4V: Effect of post-processing conditions on the microstructure and mechanical properties [Paper presentation]. THERMEC'2016, Gratz, Austria. |
![]() ![]() | Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 May 2016). Functionalization of Electron beam melting parts by Machining [Paper presentation]. workshop sur l'additive manufacturing, ULB (Bruxelles), Belgium. |
![]() ![]() | Dolimont, A., Rivière, E., & Filippi, E. (18 May 2016). Study of the functionalization of electron beam melting part through machining [Poster presentation]. Matinée des chercheurs, Valenciennes, Université de Valenciennes et du Hainaut Cambrésis, France. |
Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 April 2016). Effect of HIPping (Hot Isostatic Pressing) on electron beam melting Ti6Al4V parts after machining [Paper presentation]. 19th International ESAFORM Conference on Material Forming, ESAFORM 2016. |
![]() ![]() | Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (31 January 2016). Characterisation of electron beam melting process on Ti6Al4V in order to guide finishing operation. International Journal of Rapid Manufacturing, 5 (3/4). ![]() |
![]() ![]() | Dolimont, A., Michotte, S., De Formanoir, C., Rivière, E., Ducobu, F., Godet, S., & Filippi, E. (02 December 2015). L'impact des traitements thermiques et CIC sur la microstructure et les propriétés mécaniques des pièces en TA6V par EBM et contrôle géométrique du procédé pour guider l'usinage [Paper presentation]. A3TS: POST FABRICATION ADDITIVE : QUELS TRAITEMENTS DE FINITION ?, UTBM Sevenans (90), France. |
Dolimont, A., Rivière, E., & Filippi, E. (30 June 2015). Metrological analysis of electron beam melting process (EBM) [Poster presentation]. 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium. |
![]() ![]() | Rivière, E., Dolimont, A., Leroy, C., & Wattiaux, D. (2015). Géométries et communication graphique - exercices. |
Dolimont, A., Rivière, E., & Filippi, E. (10 March 2015). Characterization of electron beam melting process (EBM) in order to enhance finishing operations [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium. |
![]() ![]() | Dolimont, A., Rivière, E., & Filippi, E. (2014). ANALYSIS OF MACHINING CONFIGURATIONS WITH BALL-END MILLS IN ORDER TO FINISH PARTS MADE BY EBM AND COMPARISON WITH NUMERICAL MODEL. Proceedings of the eleventh international conference on high speed machining (HSM 2014). |
![]() ![]() | Kouroussis, G., Alexandrou, G., Dolimont, A., & Verlinden, O. (2014). Investigating the effect of wheel flat on railway traffic vibration using a numerical model [Paper presentation]. 21st International Congress on Sound and Vibration (ICSV21), Beijing, China. |
Dolimont, A., Rivière, E., & Filippi, E. (02 July 2014). Analysis of machining configurations with ball-end mills in order to finish parts made by EBM and comparison with numerical model [Poster presentation]. 1st Researcher's Day of the Materials Research Institute, Mons, Belgium. |
Dolimont, A., Rivière, E., & Filippi, E. (12 March 2013). Finition des pièces mécaniques à la sortie d'une production additive [Poster presentation]. 7ème édition de la Matinée de Chercheurs, Mons, Belgium. |