Profil

Ducobu François

Université de Mons - UMONS > Faculté Polytechnique > Service de Génie Mécanique

Université de Mons - UMONS > Faculté Polytechnique > Génie Mécanique

ORCID
0000-0002-4299-2699
Main Referenced Co-authors
RIVIERE LORPHEVRE, Edouard  (181)
Filippi, Enrico  (92)
Demarbaix, Anthonin  (38)
SPITAELS, Laurent  (31)
DEHOMBREUX, Pierre  (30)
Main Referenced Keywords
Mechanical Engineering (6); additive manufacturing (5); Industrial and Manufacturing Engineering (5); milling (5); Additive manufacturing (4);
Main Referenced Unit & Research Centers
CRIM - Ingénierie des matériaux (99)
CIRMAP - Centre d'Innovation et de Recherche en Matériaux Polymères (1)
CRPM - Physique des matériaux (1)
URBAINE - Urbanisation Revitalisation Bâtiment Architecture Innovations Espaces (1)
Main Referenced Disciplines
Mechanical engineering (235)
Materials science & engineering (104)
Environmental sciences & ecology (78)
Physics (54)
Mathematics (10)

Publications (total 274)

The most downloaded
271 downloads
Ducobu, F. (2015). Le PerSciF-Polytech, au coeur du quotidien des scientifiques de la Faculté. Journal de l'AIMs, Juin 2015. https://hdl.handle.net/20.500.12907/4122

The most cited

115 citations (Scopus®)

Ducobu, F., Rivière, E., & Filippi, E. (07 January 2017). On the importance of the choice of the parameters of the Johnson-Cook constitutive model and their influence on the results of a Ti6Al4V orthogonal cutting model. International Journal of Mechanical Sciences, 122, 143-155. doi:10.1016/j.ijmecsci.2017.01.004 https://hdl.handle.net/20.500.12907/27254

SPITAELS, L., Nieto Fuentes, E., DAMBLY, V., Rivière, E., Arrazola, P.-J., & DUCOBU, F. (16 May 2024). Faster Evaluation of Dimensional Machine Performance in Additive Manufacturing by Using COMPAQT Parts. Journal of Manufacturing and Materials Processing, 8 (3), 100. doi:10.3390/jmmp8030100
Peer Reviewed verified by ORBi

Spitaels, L., Aldeiturriaga Olabarri, N., Bossu, J., Martic, G., Juste, E., Rivière, E., Arrazola, P.-J., & Ducobu, F. (2024). Experimental evaluation of the maximal force before debonding a part from the build platform of an AM printer. Materials Research Proceedings, Vol. 41. doi:10.21741/9781644903131-10
Peer reviewed

Lorenzoni, M., Odent, J., Rivière, E., Spitaels, L., Homrani, M. K., & Ducobu, F. (2024). Preliminary study on the impact of thermal processing on the performances of parts obtained by fused deposition modeling (FDM). Materials Research Proceedings, Vol. 41. doi:10.21741/9781644903131-11
Peer reviewed

Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (2024). Comparison of artificial intelligence techniques for cutting tool condition monitoring. Materials Research Proceedings. doi:10.21741/9781644903131-217
Peer reviewed

Bossu, J., Rivière, E., Spitaels, L., Ducobu, F., Delaunois, F., Martic, G., Delmotte, C., Juste, E., & Petit, F. (2024). Green machining of Ti6Al4V/Polymers composite made by pellets additive manufacturing. Materials Research Proceedings, Vol. 41. doi:10.21741/9781644903131-210
Peer reviewed

Ochana, I., Ducobu, F., Spitaels, L., Homrani, M. K., & Demarbaix, A. (2024). Comparative accuracy analysis of continuous fiber composite printers: Coextrusion vs. dual-nozzle technology. Materials Research Proceedings, Vol. 41. doi:10.21741/9781644903131-14
Peer reviewed

Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (25 April 2024). Comparison of artificial intelligence techniques for cutting tool condition monitoring [Paper presentation]. 27th International ESAFORM Conference on Material Forming, ESAFORM 2024, Toulouse, France.
Peer reviewed

Ducobu, F., Kugalur-Palanisamy, N., Briffoteaux, G., Gobert, M., Tuyttens, D., Arrazola, P.-J., & Rivière, E. (16 April 2024). Identification of the Constitutive and Friction Models Parameters via a Multi-Objective Surrogate-Assisted Algorithm for the Modeling of Machining—Application to Arbitrary Lagrangian Eulerian Orthogonal Cutting of Ti6Al4V. Journal of Manufacturing Science and Engineering, 146 (6). doi:10.1115/1.4065223
Peer Reviewed verified by ORBi

Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (26 March 2024). Predicting the Health of Cutting Tool with Artificial Intelligence [Poster presentation]. Mardi des chercheurs 2024 (MdC 2024).

Spitaels, L., Nieto Fuentes, E., Rivière, E., Arrazola, P.-J., & Ducobu, F. (February 2024). A Systematic Method for Assessing the Machine Performance of Material Extrusion Printers. Journal of Manufacturing and Materials Processing, 8 (1), 36. doi:10.3390/jmmp8010036
Peer Reviewed verified by ORBi

DUCOBU, F., Pantalé, O., & Lauwers, B. (2024). Predictive 3D modelling of free oblique cutting introducing an ANN-based material flow law with experimental validation over a wide range of conditions. International Journal of Advanced Manufacturing Technology. doi:10.1007/s00170-024-12956-7
Peer Reviewed verified by ORBi

Spitaels, L., Rivière, E., Bossu, J., Dambly, V., & Ducobu, F. (2024). Toward More Flexible and Personalized Production of Ceramic Parts [Poster presentation]. Tuesday of Researchers "Mardi des Chercheurs" 2024, Mons, Belgium.

Spitaels, L., Naiara Aldeiturriaga Olabarri, Bossu, J., Martic, G., Juste, E., Arrazola, P.-J., Rivière, E., & Ducobu, F. (2024). Tool wear for finishing milling of green thermoplastic-ceramic composites fabricated with pellet AM. Procedia CIRP, 121, 97-102. doi:10.1016/j.procir.2023.09.235
Peer Reviewed verified by ORBi

Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (October 2023). Suivi de la Dégradation des Outils de Coupe avec des Méthodes d’Intelligence Artificielle [Paper presentation]. 31èmes Journées Manufacturing'21, Cluny, France.

Fabrice Petit, Cathy Delmotte, Grégory Martic, Enrique Juste, Spitaels, L., Rivière, E., Ducobu, F., Bossu, J., & Delaunois, F. (29 September 2023). Evaluation of the suitability of Pellet Additive Manufacturing technology for the design & manufacturing of complex ceramic parts [Paper presentation]. IWAC (INTERNATIONAL WORKSHOP ON ADVANCED CERAMICS, IWAC09), Limoges, France.

Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (2023). Cutting Tool Degradation Monitoring in Turning with Artificial Neural Network. In Proceedings of the 33rd European Safety and Reliability Conference (ESREL 2023). Singapore, Singapore: Research Publishing, Singapore. doi:10.3850/978-981-18-8071-1_P287-cd
Peer reviewed

Ducobu, F., Spitaels, L., Martic, G., Juste, E., & Rivière, E. (25 August 2023). Hybrid manufacturing of components made of engineering ceramics [Paper presentation]. 72nd CIRP General Assembly - STC-C meeting.
Peer reviewed

Ducobu, F., Beuscart, T., Erice, B., Cuesta, M., Lauwers, B., & Arrazola, P.-J. (22 August 2023). A mechanistic-finite element hybrid approach to modelling cutting forces when drilling GFRP-AISI 304 stacks [Paper presentation]. 72nd CIRP General Assembly.
Peer reviewed

Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (03 July 2023). Cutting Tool Health Monitoring in Turning with AI [Paper presentation]. 12th IMA International Conference on Modelling in Industrial Maintenance and Reliability (MIMAR), Nottingham, United Kingdom.
Peer reviewed

Ducobu, F., Demarbaix, A., Rivière, E., Spitaels, L., Petit, F., Preux, N., Duterte, C., Mulliez, M., & Lauwers, B. (20 June 2023). Impact of Green Ceramic Hybrid Machining (GCHM) on Reliability and Repeatability of the Properties of Sintered Yttrium-Tetragonal Zirconia Polycrystal Parts. Journal of Manufacturing and Materials Processing, 7 (3), 118. doi:10.3390/jmmp7030118
Peer Reviewed verified by ORBi

Rivière, E., Spitaels, L., Bossu, J., Martic, G., Delaunois, F., & Ducobu, F. (01 June 2023). Optimal Machining Parameters Determination of Polymers-Ceramic Composite for Hybrid Manufacturing [Paper presentation]. 19th CIRP Conference on Modelling of Machining Operations, CIRP CMMO, Karlsruhe, Germany.
Peer reviewed

Ducobu, F., Kugalur Palanisamy, N., Arrazola, P.-J., & Rivière, E. (01 June 2023). Application of material constitutive and friction models parameters identified with AI and ALE to a CEL orthogonal cutting model [Paper presentation]. 19th CIRP Conference on Modelling of Machining Operations, CIRP CMMO, Karlsruhe, Germany.
Peer reviewed

Ducobu, F., Palanisamy, N. K., Arrazola, P.-J., & Rivière, E. (03 May 2023). Application of material constitutive and friction models parameters identified with AI and ALE to a CEL orthogonal cutting model. Procedia CIRP, 117, 311-316. doi:10.1016/j.procir.2023.03.053
Peer Reviewed verified by ORBi

Spitaels, L., Rivière, E., Gregory Martic, Enrique Juste, & Ducobu, F. (19 April 2023). Machining of PAM green Y-TZP: Influence of build and in-plane directions on cutting forces and surface topography. Materials Research Proceedings, 28, 1245-1253. doi:10.21741/9781644902479-135
Peer reviewed

Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (19 April 2023). Comparison of cutting tool wear classification performance with artificial intelligence techniques. Materials Research Proceedings, 28, 1265-1274. doi:10.21741/9781644902479-137
Peer reviewed

Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (19 April 2023). Comparison of cutting tool wear classification performance with artificial intelligence techniques [Paper presentation]. 26th International ESAFORM Conference on Material Forming, ESAFORM 2023.
Peer reviewed

Spitaels, L., Rivière, E., Martic, G., Juste, E., & Ducobu, F. (19 April 2023). Machining of PAM green Y-TZP: Influence of build and in-plane directions on cutting forces and surface topography [Paper presentation]. 26th International ESAFORM Conference on Material Forming, ESAFORM 2023.
Peer reviewed

Dambly, V., Rivière, E., Ducobu, F., & Verlinden, O. (2023). Tri-dexel-based cutter-workpiece engagement: computation and validation for virtual machining operations. International Journal of Advanced Manufacturing Technology. doi:10.1007/s00170-023-10950-z
Peer Reviewed verified by ORBi

Spitaels, L., Dantinne, H., Bossu, J., Rivière, E., & Ducobu, F. (10 March 2023). A Systematic Approach to Determine the Cutting Parameters of AM Green Zirconia in Finish Milling. Journal of Composites Science, 7 (3), 112. doi:10.3390/jcs7030112
Peer Reviewed verified by ORBi

Rivière, E., Spitaels, L., Bossu, J., Martic, G., Delaunois, F., & Ducobu, F. (2023). Optimal Machining Parameters Determination of Polymers-Ceramic Composite for Hybrid Manufacturing. Procedia CIRP, 117, 456-461. doi:10.1016/j.procir.2023.03.077
Peer Reviewed verified by ORBi

Ducobu, F., Beuscart, T., Erice, B., Cuesta, M., Lauwers, B., & Arrazola, P.-J. (2023). A mechanistic-finite element hybrid approach to modelling cutting forces when drilling GFRP-AISI 304 stacks. CIRP Annals - Manufacturing Technology. doi:10.1016/j.cirp.2023.04.041
Peer reviewed

Bossu, J., Delaunois, F., Spitaels, L., Ducobu, F., & Rivière, E. (08 December 2022). HYbrid PROduction of Pellets-based (PIM-MIM-CIM) Additive Manufactured parts - HyProPAM [Paper presentation]. Conférence méca, Mons, Belgium.

Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (24 November 2022). Cutting Tool Health Monitoring in Turning with Artificial Intelligence Technique [Paper presentation]. 6th International Conference on System Reliability and Safety, Venise, Italy.
Peer reviewed

Malakizadi, A., Bertolini, R., Ducobu, F., Kilic, Z. M., Magnanini, M. C., & Shokrani, A. (25 October 2022). Recent advances in modelling and simulation of surface integrity in machining - A review. Procedia CIRP, 115, 232 - 240. doi:10.1016/j.procir.2022.10.079
Peer Reviewed verified by ORBi

Malakizadi, A., Bertolini, R., Ducobu, F., Kilic, Z. M., Magnanini, M. C., & Shokrani, A. (25 October 2022). Recent advances in modelling and simulation of surface integrity in machining – a review [Paper presentation]. 10th CIRP Global Web Conference – Material Aspects of Manufacturing Processes.
Peer reviewed

Bossu, J., Delaunois, F., Martic, G., Delmotte, C., Spitaels, L., Ducobu, F., & Rivière, E. (24 October 2022). Pellets Additive Manufacturing of dense Tosoh black zirconia parts [Poster presentation]. Conférence internationale Matériaux 2022, Lille, France.

Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (06 September 2022). Predicting the Health of Cutting Tools with Artificial Intelligence [Poster presentation]. Mardi des Chercheurs 2022 (MdC2022).

Bossu, J., Delaunois, F., Spitaels, L., Ducobu, F., & Rivière, E. (06 September 2022). Production hybride de pièces fabriquées par additif à base de granulés (PIM-MIM-CIM) (Win²Wal – HyProPAM) [Poster presentation]. Mardi des chercheurs, Mons, Belgium.

Spitaels, L., Rivière, E., Bossu, J., & Ducobu, F. (September 2022). Hybrid Manufacturing of Complex Ceramic Parts with Tight Tolerances and Smooth Surface Topography [Poster presentation]. Mardi des Chercheurs - onzième éditions (2022), Mons, Belgium.

Spitaels, L., Rivière, E., Díaz, M. C., Duquesnoy, J., & Ducobu, F. (09 June 2022). Surface finishing of EBM parts by (electro-)chemical etching [Paper presentation]. 6th CIRP Conference on Surface Integrity.

Beuscart, T., Rivière, E., Ducobu, F., & Arrazola, P.-J. (08 June 2022). Hole quality analysis of AISI 304-GFRP stacks using robotic drilling [Paper presentation]. 6th CIRP Conference on Surface Integrity.

KUGALUR PALANISAMY, N., RIVIERE LORPHEVRE, E., Gobert, M., Briffoteaux, G., Tuyttens, D., Arrazola, P.-J., & DUCOBU, F. (06 June 2022). Identification of the Parameter Values of the Constitutive and Friction Models in Machining Using EGO Algorithm: Application to Ti6Al4V. Metals, 12 (6), 976. doi:10.3390/met12060976
Peer Reviewed verified by ORBi

Spitaels, L., Rivière, E., Demarbaix, A., Thielens, V., & Ducobu, F. (01 June 2022). Performances assessment of two FDM printers using a benchmark artifact [Poster presentation]. euspen's 22 nd International Conference & Exhibition.
Peer reviewed

Spitaels, L., Rivière, E., Díaz, M. C., Duquesnoy, J., & Ducobu, F. (01 June 2022). Surface finishing of EBM parts by (electro-)chemical etching. Procedia CIRP, 108, 112-117. doi:10.1016/j.procir.2022.03.023
Peer Reviewed verified by ORBi

Spitaels, L., Rivière, E., Demarbaix, A., Thielens, V., & Ducobu, F. (2022). Dimensional and geometrical performance assessment of two FDM printers using a benchmark artifact. Proceedings of the European Society for Precision Engineering and Nanotechnology - 22nd International Conference and Exhibition, 69-72.
Peer reviewed

Beuscart, T., Arrazola, P.-J., Rivière, E., Flores, P., & Ducobu, F. (May 2022). Hole quality analysis of AISI 304-GFRP stacks using robotic drilling. Procedia CIRP, 108, 436-441. doi:10.1016/j.procir.2022.03.068
Peer Reviewed verified by ORBi

Kugalur Palanisamy, N., Rivière, E., Arrazola, P.-J., & Ducobu, F. (28 April 2022). Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V. Key Engineering Materials, 926, 1619-1628. doi:10.4028/p-be47dp
Peer Reviewed verified by ORBi

Kugalur palanisamy, N., Rivière, E., Arrazola, P.-J., & Ducobu, F. (28 April 2022). Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V [Paper presentation]. 25th International Conference on Material Forming, ESAFORM 2022.

DUCOBU, F., Mélice, E., Rivière-Lorphèvre, E., Beuscart, T., Aizpuru, O., Granjon, A., Flores, P., Soriano, D., Cuesta, M., & Arrazola, P.-J. (09 April 2022). Sensitivity Analysis of Various Geometries of PCD and Cemented Tungsten Carbide Cutting Tools during the Milling of GFRP Composite. Polymers, 14 (8), 1524. doi:10.3390/polym14081524
Peer Reviewed verified by ORBi

Spitaels, L., Rivière, E., Demarbaix, A., & Ducobu, F. (17 March 2022). Adaptive benchmarking design for additive manufacturing processes. Measurement Science and Technology, 33 (064003). doi:10.1088/1361-6501/ac5877
Peer Reviewed verified by ORBi

Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (10 December 2021). A Systematic Literature Review of Cutting Tool Wear Monitoring in Turning by Using Artificial Intelligence Techniques. Machines, 9 (351), 1-54. doi:10.3390/machines9120351
Peer Reviewed verified by ORBi

Demarbaix, A., Ducobu, F., Preux, N., Petit, F., & Rivière, E. (06 September 2021). Binder influence on green ceramic machining by means of milling and laser machining. Procedia CIRP, 101, 206-209. doi:10.1016/j.procir.2021.02.023
Peer Reviewed verified by ORBi

Demarbaix, A., Mulliez, M., Rivière, E., Spitaels, L., Dutertre, C., Preux, N., Petit, F., & Ducobu, F. (2021). Green Ceramic Machining: Determination of the Recommended Feed Rate for Y-TZP Milling. Journal of Composites Science.
Peer reviewed

Sela, A., Soler, D., Ortiz De Zarate, G., Germain, G., Ducobu, F., & Arrazola, P. (21 July 2021). Inverse Identification of the Ductile Failure Law for Ti6Al4V Based on Orthogonal Cutting Experimental Outcomes. Metals, 11 (1154).
Peer reviewed

Equeter, L., Ducobu, F., & Dehombreux, P. (29 June 2021). A time-dependent Proportional Hazard model for cutting tools Remaining Useful Life estimate under varying cutting parameters [Paper presentation]. 11th IMA International Conference on Modelling in Industrial Maintenance and Reliability (MIMAR), Nottingham, Unknown/unspecified.

Spitaels, L., Rivière, E., Demarbaix, A., & Ducobu, F. (2021). Development of a novel benchmark artifact for Additive Manufacturing processes. Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, 99-102.
Peer reviewed

Ducobu, F., Arrazola, P., & Aristimuño, P. (2021). Use of the CEL method for estimating the minimum chip thickness when orthogonal cutting Ti6Al4V. Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, 381-382.
Peer reviewed

Ducobu, F., Arrazola, P., & Aristimuño, P. (01 June 2021). Use of the CEL method for estimating the minimum chip thickness when orthogonal cutting Ti6Al4V [Paper presentation]. euspen's 21st International Conference & Exhibition, Copenhage, Denmark.

Spitaels, L., Rivière, E., Anthonin, D., & Ducobu, F. (June 2021). Development of a novel benchmark artifact for Additive Manufacturing processes [Poster presentation]. euspen’s 21st International Conference & Exhibition.
Peer reviewed

Kugalur Palanisamy, N., Rivière, E., Arrazola, P., & Ducobu, F. (29 May 2021). Influence of Constitutive Models and the Choice of the Parameters on FE Simulation of Ti6Al4V Orthogonal Cutting Process for Different Uncut Chip Thicknesses. Journal of Manufacturing and Materials Processing, 5.
Peer Reviewed verified by ORBi

Demarbaix, A., Ducobu, F., Preux, N., Petit, F., & Rivière, E. (24 May 2021). Binder influence on green ceramic machining by means of milling and laser machining [Paper presentation]. 9th CIRP Conference on High Performance Cutting, HPC 2020.

Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 May 2021). On the selection of an empirical material constitutive model for the finite element modeling of Ti6Al4V orthogonal cutting, including the segmented chip formation. International Journal of Material Forming, 4 (3), 361 - 374. doi:10.1007/s12289-020-01535-2
Peer Reviewed verified by ORBi

Spitaels, L., & Ducobu, F. (26 April 2021). Evènement de maillage UMHAP : Faculté Polytechnique de Mons Service de Génie Mécanique [Poster presentation]. Evènement de maillage UMHAP, Mons, Belgium.

Ducobu, F., Demarbaix, A., & Pantalé, O. (15 April 2021). Finite element modelling of the Taylor impact test in 3D with the Coupled Eulerian-Lagrangian method [Paper presentation]. ESAFORM 2021, Liège, Belgium.

Beuscart, T., Arrazola, P., Rivière, E., & Ducobu, F. (14 April 2021). Development and experimental validation of a macroscopic analytical model aiming to generate metal-FRP stacks drilling cutting force and torque. 24th International ESAFORM Conference on Material Forming, ESAFORM 2021, 2373. doi:10.25518/esaform21.2373
Peer reviewed

Ducobu, F., Demarbaix, A., & Pantalé, O. (14 April 2021). Finite element modelling of the Taylor impact test in 3D with the Coupled Eulerian-Lagrangian method. 24th International ESAFORM Conference on Material Forming, ESAFORM 2021, 316. doi:10.25518/esaform21.316
Peer reviewed

Beuscart, T., Arrazola, P.-J., Rivière, E., & Ducobu, F. (14 April 2021). Development and experimental validation of a macroscopic analytical model aiming to generate metal-FRP stacks drilling cutting force and torque [Paper presentation]. 24th International ESAFORM Conference on Material Forming, ESAFORM 2021.

Kugalur Palanisamy, N., Rivière, E., Arrazola, P., & Ducobu, F. (2021). Influences of cutting speed and material constitutive models on chip formation and their effects on the results of Ti6Al4V orthogonal cutting simulation [Paper presentation]. ESAFORM 2021, Liège, Belgium.

Beuscart, T., Ducobu, F., & Rivière, E. (2021). Etude de l'usinage robotique de stacks métaux-composites [Poster presentation]. Mardi des chercheurs 2021, Valenciennes, France.

Demarbaix, A., Ducobu, F., Juste, E., Petit, F., DUTERTE, C., & Rivière, E. (01 January 2021). Experimental investigation on green ceramic machining with nanosecond laser source. Journal of Manufacturing Processes, 61, 245-253. doi:10.1016/j.jmapro.2020.11.031
Peer reviewed

Equeter, L., Ducobu, F., & Dehombreux, P. (18 December 2020). Cutting Tools Replacement: Toward a Holistic Framework. IFAC-PapersOnLine, 53 (3), 227-232. doi:10.1016/j.ifacol.2020.11.037
Peer reviewed

Equeter, L., Ducobu, F., & Dehombreux, P. (10 September 2020). Cutting tools replacement: Toward a holistic framework [Paper presentation]. 4th IFAC Workshop on Advanced Maintenance Engineering, Services and Technologies, AMEST 2020.

Ducobu, F., Rivière, E., Demarbaix, A., & Lauwers, B. (15 August 2020). Prediction of local sintering in laser beam machining of green Y-TZP ceramic [Paper presentation]. 69th CIRP General Assembly, Munich, Germany.
Peer reviewed

Demarbaix, A., Ducobu, F., Petit, F., & Rivière, E. (2020). A new manufacturing chain for ceramic shaping: Sequential combination of milling and laser machining in green ceramic. Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology.
Peer reviewed

Demarbaix, A., Ducobu, F., Petit, F., & Rivière, E. (08 June 2020). A new manufacturing chain for ceramic shaping: Sequential combination of milling and laser machining in green ceramic [Poster presentation]. 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020.

Sela, A., Ortiz De Zarate, G., Soler, D., Aristimuño, P., Soriano, D., Germain, G., Ducobu, F., & Arrazola, P. (01 June 2020). Surface drag analysis after Ti-6Al-4V orthogonal cutting using grid distortion. Procedia CIRP, 87, 372-377. doi:10.1016/j.procir.2020.02.040
Peer Reviewed verified by ORBi

Sela, A., Ortiz-De-Zarate, G., Soler, D., Aristimuño, P., Soriano, D., Germain, G., Ducobu, F., & Arrazola, P. J. (01 June 2020). Surface drag analysis after Ti-6Al-4V orthogonal cutting using grid distortion [Paper presentation]. 5th CIRP Conference on Surface Integrity, CSI 2020.

Demarbaix, A., Ducobu, F., Preux, N., Petit, F., & Rivière, E. (21 May 2020). Green Ceramic Machining: Influence of the Cutting Speed and the Binder Percentage on the Y-TZP Behavior. Journal of Manufacturing and Materials Processing, 4 (50). doi:10.3390/jmmp4020050
Peer Reviewed verified by ORBi

Equeter, L., Devlamincq, R., Ducobu, F., Dutoit, C., & Dehombreux, P. (19 May 2020). Use of Longitudinal Roughness Measurements as Tool End-of-Life Indicator in AISI 1045 Dry Longitudinal Turning. Materials Science Forum, 986, 93-101. doi:10.4028/www.scientific.net/MSF.986.93
Peer reviewed

Kugalur Palanisamy, N., Ducobu, F., Rivière, E., & Arrazola, P. (2020). Influence of the Choice of the Parameters on Constitutive Models and their Effects on the Results of Ti6Al4V Orthogonal Cutting Simulation [Paper presentation]. Esaform 2020, Cottbus , Germany.

Spitaels, L., Ducobu, F., Demarbaix, A., Rivière, E., & Dehombreux, P. (27 April 2020). Influence of conventional machining on chemical finishing of Ti6Al4V Electron Beam Melting parts. Procedia Manufacturing, 47, 1036-1042. doi:10.1016/j.promfg.2020.04.321
Peer reviewed

Kugalur Palanisamy, N., Rivière, E., Ducobu, F., & Arrazola, P. (27 April 2020). Influence of the Choice of the Parameters on Constitutive Models and their Effects on the Results of Ti6Al4V Orthogonal Cutting Simulation. Procedia Manufacturing, 47, 458-465. doi:10.1016/j.promfg.2020.04.335
Peer reviewed

Ducobu, F., Rivière, E., Demarbaix, A., & Lauwers, B. (2020). Prediction of local sintering in laser beam machining of green Y-TZP ceramic. CIRP Annals - Manufacturing Technology. doi:10.1016/j.cirp.2020.04.051
Editorial reviewed

Spitaels, L., Ducobu, F., Demarbaix, A., Rivière, E., & Dehombreux, P. (04 April 2020). Influence of conventional machining on chemical finishing of Ti6Al4V electron beam melting parts [Paper presentation]. 23rd International Conference on Material Forming, ESAFORM 2020.

Equeter, L., Ducobu, F., Rivière, E., Serra, R., & Dehombreux, P. (27 March 2020). An Analytic Approach to the Cox Proportional Hazards Model for Estimating the Lifespan of Cutting Tools. Journal of Manufacturing and Materials Processing, 4 (27), 1-13. doi:10.3390/jmmp4010027
Peer Reviewed verified by ORBi

Ducobu, F. (25 October 2019). Presentation of research activities [Paper presentation]. Rencontre Safran Aero Boosters, Mons, Belgium.

Equeter, L., Ducobu, F., Rivière, E., & Dehombreux, P. (02 October 2019). An Integrative Approach for Estimating Cutting Tools Wear in Turning [Poster presentation]. MS&T2019, Portland, United States - Oregon.

Equeter, L., Devlamincq, R., Ducobu, F., Dutoit, C., & Dehombreux, P. (02 October 2019). Cutting Inserts Wear Monitoring in AISI 1045 Dry Longitudinal Turning through Cutting Forces: a Case Study [Paper presentation]. MS&T2019, Portland, United States - Oregon.

Equeter, L., Devlamincq, R., Ducobu, F., Dutoit, C., & Dehombreux, P. (09 August 2019). Use of longitudinal roughness measurements as tool end-of-life indicator in AISI 1045 dry longitudinal turning [Paper presentation]. 4th International Conference on Design, Materials and Manufacturing, ICDMM 2019 and the 4th International Conference on Material Engineering and Smart Materials, ICMESM 2019.

Demarbaix, A., Ducobu, F., Petit, F., & Rivière, E. (11 July 2019). Développement d'une platforme hybride pour la mise en forme de la céramique [Paper presentation]. Manufacturing 21, Mons, Belgium.

Ducobu, F. (10 July 2019). 28èmes Journées Manufacturing'21 [Paper presentation]. 28èmes Journées Manufacturing'21, Mons, Belgium.

Ducobu, F. (10 July 2019). Présentation des activités du service deGénie Mécanique en procédés de fabrication (ManUMONS): 28èmes Journées Manufacturing'21 [Paper presentation]. 28èmes Journées Manufacturing'21, Mons, Belgium.

Rivière, E., Huynh, H., Ducobu, F., & Verlinden, O. (08 July 2019). Cutting Force Prediction in Robotic Machining. Procedia CIRP, 82, 509-514. doi:10.1016/j.procir.2019.04.143
Peer Reviewed verified by ORBi

Leroy, C., Rivière, E., Ducobu, F., Lavernhe, S., Tournier, C., & Filippi, E. (02 July 2019). Performance simulation of different toolpaths in 2D1/2 pocket milling. AIP Conference Proceedings, 2113. doi:10.1063/1.5112609
Peer Reviewed verified by ORBi

Benhassine, M., Rivière, E., Arrazola, P., Gobin, P., Granjon, A., Aizpuru, O., & Ducobu, F. (02 July 2019). Finite-element simulations of Al7075-T6 orthogonal cutting: Effect of part geometry and mesh on chip morphology and formation mechanism. AIP Conference Proceedings, 2113. doi:10.1063/1.5112611
Peer Reviewed verified by ORBi

Kugalur Palanisamy, N., Rivière, E., Pedro, A., & Ducobu, F. (02 July 2019). Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting process. AIP Conference Proceedings, 2113. doi:10.1063/1.5112617
Peer Reviewed verified by ORBi

Dolimont, A., Demarbaix, A., Ducobu, F., & Rivière, E. (02 July 2019). Chemical etching as a finishing process for electron beam melting (EBM) parts. AIP Conference Proceedings, 2113 (150020). doi:10.1063/1.5112696
Peer Reviewed verified by ORBi

Ortiz-De-Zarate, G., Ducobu, F., Sela, A., Saez-De-Buruaga, M., Soler, D., Childs, T. H. C., & Arrazola, P. (13 June 2019). Evaluation of different flow stress laws coupled with a physical based ductile failure criterion for the modelling of the chip formation process of Ti-6Al-4V under broaching conditions. Procedia CIRP, 82, 65-70. doi:10.1016/j.procir.2019.04.067
Peer Reviewed verified by ORBi

Ducobu, F., Rivière, E., Galindo-Fernandez, M., Ayvar-Soberanis, S., Arrazola, P., & Ghadbeigi, H. (13 June 2019). Coupled Eulerian-Lagrangian (CEL) simulation for modelling of chip formation in AA2024-T3. Procedia CIRP, 82, 142-147. doi:10.1016/j.procir.2019.04.071
Peer Reviewed verified by ORBi

Rivière, E., Huynh, H. N., Verlinden, O., & Ducobu, F. (13 June 2019). Cutting force prediction in robotic machining [Paper presentation]. 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO.

Ortiz-De-Zarate, G., Sela, A., Ducobu, F., Saez-De-Buruaga, M., Soler, D., Childs, T. H. C., & Arrazola, P. J. (13 June 2019). Evaluation of different flow stress laws coupled with a physical based ductile failure criterion for the modelling of the chip formation process of Ti-6Al-4V under broaching conditions [Paper presentation]. 17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO.

Demarbaix, A., Rivière, E., Ducobu, F., Filippi, E., Petit, F., & Juste, E. (2019). Calibration method of hybrid machining process in the green ceramic combining micro-milling and laser machining. European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019, 76-77.
Peer reviewed

Demarbaix, A., Rivière, E., Ducobu, F., Dolimont, A., Petit, F., & Juste, E. (03 June 2019). Calibration method of hybrid machining process in the green ceramic combining micro-milling and laser machining [Poster presentation]. 19th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2019.

Ducobu, F., Rivière, E., Galindo-Fernandez, M., Ayvar-Soberanis, S., Arrazola, P., & Ghadbeigi, H. (01 June 2019). Coupled Eulerian-Lagrangian (CEL) simulation for modelling of chip formation in AA2024-T3 [Paper presentation]. 17th CIRP conference on modelling of machining operations, Sheffield, Unknown/unspecified.

Ducobu, F. (23 May 2019). Presentation of research activities [Paper presentation]. Rencontre UMONS-IMT Douai, Mons, Belgium.

Kugalur palanisamy, N., Rivière, E., Arrazola, P.-J., & Ducobu, F. (08 May 2019). Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting process [Paper presentation]. 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019.

Leroy, C., Rivière, E., Ducobu, F., Lavernhe, S., Tournier, C., & Filippi, E. (08 May 2019). Performance simulation of different toolpaths in 2D1/2 pocket milling [Paper presentation]. 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019.

Dolimont, A., Demarbaix, A., Ducobu, F., & Rivière, E. (01 May 2019). Chemical etching as a finishing process for electron beam melting (EBM) parts [Paper presentation]. Esaform 2019, Vitoria-Gasteiz, Spain.

Benhassine, M., Rivière, E., Arrazola, P., Gobin, P., Granjon, A., Aizpuru, O., & Ducobu, F. (01 May 2019). Finite-element simulations of Al7075-T6 orthogonal cutting: Effect of part geometry and mesh on chip morphology and formation mechanism [Paper presentation]. Esaform 2019, Vitoria-Gasteiz, Spain.

Dolimont, A., Ducobu, F., & Dutoit, C. (2019). Les composites participent à l'allègement du véhicule pour le concours Shell Eco-Marathon. Polytech-News, n°57.

Zeoli, S., & Ducobu, F. (2019). Intégration de petites éoliennes en milieu urbain. Polytech-News, n°57.

Bagheri, A., Liemans, B., Quinten, J., & Ducobu, F. (2019). Le bâtiment : modélisation, consommation, certification...la thermique en action ! Polytech-News, n°57.

Duez, J., Vincké, O., Descamps, F., & Ducobu, F. (2019). Deux de nos diplômés actifs dans le domaine de l'environnement. Polytech-News, n°57.

Demarbaix, A., Rivière, E., Ducobu, F., & Petit, F. (03 April 2019). Hybrid platform: sequential combination of two technologies in shaping of ceramic materials [Poster presentation]. young Ceramists Additive Manufacturing Forum (yCAM), Mons, Belgium.

Equeter, L., Dutoit, C., Ducobu, F., & Dehombreux, P. (05 March 2019). Estimation de l'usure des outils coupants en tournage [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.

Leroy, C., Rivière, E., & Ducobu, F. (05 March 2019). Evaluation de l'efficacité temporelle de trajectoires d'évidement 2D1/2 [Poster presentation]. Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.

Ducobu, F., & Rivière, E. (21 February 2019). Transition of the finite element modelling of orthogonal cutting (2D) to oblique cutting (3D) [Paper presentation]. CIRP Winter Meetings, Paris, France.
Peer reviewed

Leroy, C., Rivière, E., & Ducobu, F. (14 January 2019). Evaluation de l'efficacité temporelle de trajectoires en fraisage à l'aide de VPOp [Paper presentation]. Manufacturing 21, Toulon, France.

Dehombreux, P., Dutoit, C., Equeter, L., Rivière, E., & Ducobu, F. (17 October 2018). Industrie 1.2.3.4.0 : quelle évolution pour la fonction maintenance? [Paper presentation]. Colloque international : Transformation Numérique des Entreprises - Industrie 4.0, Ecole Centrale Casablanca, Morocco.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (03 July 2018). Hybrid machining of Ceramic: Combination sequential milling and laser machining [Poster presentation]. The 5th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.

Huynh, H., Rivière, E., Ducobu, F., Ozcan, A., & Verlinden, O. (30 June 2018). Dystamill: a framework dedicated to the dynamic simulation of milling operations for stability assessment. International Journal of Advanced Manufacturing Technology, 98, 2109-2126. doi:10.1007/s00170-018-2357-3
Peer Reviewed verified by ORBi

Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (2018). Functionalization of Electron BeamMelting parts in order to guide finishing operations [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/23478

Dolimont, A., Rivière, E., Ducobu, F., & Backaert, S. (02 May 2018). Impact of chemical polishing on surface roughness and dimensional quality of electron beam melting process (EBM) parts. AIP Conference Proceedings, 1960 (140007). doi:10.1063/1.5034999
Peer reviewed

Gremmo, S., & Ducobu, F. (2018). Research Staff Mobility - Spending two months at Mississippi State University. Polytech-News, n°56.

Motamedi, A., & Ducobu, F. (2018). Polytech Mons Engineers around the world - My experience abroad. Polytech-News, n°56.

Olivier, B., & Ducobu, F. (2018). Research Staff Mobility - Visiting the University of Wisconsin- Madison in the United-States. Polytech-News, n°56.

Dupont, P., & Ducobu, F. (2018). Polytech Mons Engineers around the world - The International Section of the AIMs Polytech Mons Alumni. Polytech-News, n°56.

Ducobu, F. (2018). Research Staff Mobility - Visiting Mondragon University, Spain. Polytech-News, n°56.

Bénard, P., & Ducobu, F. (2018). Research Staff Mobility - Visiting the FPMs. Polytech-News, n°56.

Dutoit, C., Equeter, L., & Ducobu, F. (2018). Research Staff Mobility - Attending a Doctoral School in Paris. Polytech-News, n°56.

Aubert, A., & Ducobu, F. (2018). Co-building a New Doctoral Education Framework with the Scientific Community. Polytech-News, n°56.

Lust, A., Steinfort, C., Rivière, E., & Ducobu, F. (01 May 2018). Engineers around the world - My experience abroad. Polytech.News, 56.

Equeter, L., Ducobu, F., Rivière, E., Abouridouane, M., Klocke, F., & Dehombreux, P. (23 April 2018). Estimation of the Influence of Tool Wear on Force Signals: a Finite Element Approach in AISI 1045 Orthogonal Cutting. AIP Conference Proceedings, 1960 (070012). doi:10.1063/1.5034908
Peer Reviewed verified by ORBi

Ozcan, A., Rivière, E., & Ducobu, F. (23 April 2018). Corner smoothing of 2D milling toolpath using b-spline curve by optimizing the contour error and the feedrate. AIP Conference Proceedings, 1960 (070020). doi:10.1063/1.5034916
Peer Reviewed verified by ORBi

Benhassine, M., Rivière, E., Arrazola, P., Gobin, P., Dumas, D., Madhavan, V., Aizpuru, O., & Ducobu, F. (23 April 2018). 2D simulations of orthogonal cutting of CFRP: Effect of tool angles on parameters of cut and chip morphology. AIP Conference Proceedings, 1960 (070005). doi:10.1063/1.5034901
Peer Reviewed verified by ORBi

Equeter, L., Ducobu, F., Rivière, E., Abouridouane, M., Klocke, F., & Dehombreux, P. (23 April 2018). Estimation of the influence of tool wear on force signals: A finite element approach in AISI 1045 orthogonal cutting [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.

Dolimont, A., Rivière, E., Ducobu, F., & Backaert, S. (23 April 2018). Impact of chemical polishing on surface roughness and dimensional quality of electron beam melting process (EBM) parts [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.

Benhassine, M., Rivière, E., Arrazola, P.-J., Gobin, P., Dumas, D., Madhavan, V., Aizpuru, O., & Ducobu, F. (23 April 2018). 2D simulations of orthogonal cutting of CFRP: Effect of tool angles on parameters of cut and chip morphology [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.

Ozcan, A., Rivière, E., & Ducobu, F. (23 April 2018). Corner smoothing of 2D milling toolpath using b-spline curve by optimizing the contour error and the feedrate [Paper presentation]. 21st International ESAFORM Conference on Material Forming, ESAFORM 2018.

Equeter, L., Letot, C., Dutoit, C., Serra, R., Ducobu, F., & Dehombreux, P. (27 March 2018). Use of a Stochastic Model for Updated Remaining Useful Life Estimates [Poster presentation]. Mardi des Chercheurs (MdC2018), Valenciennes, France.

Demarbaix, A., Dolimont, A., Ducobu, F., Equeter, L., Huynh, H., Leroy, C., Ozcan, A., & Rivière, E. (07 March 2018). Manumons [Poster presentation]. 1ère journée doctorale transfontalière, Reims Champagne-Ardenne , France.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (07 February 2018). Behaviour of pre-sintered Y-TZP during machining operations: Determination of recommended cutting parameters. Journal of Manufacturing Processes, 32, 85-92. doi:10.1016/j.jmapro.2018.01.020
Peer reviewed

Ducobu, F. (2017). Virtual Manufacturing - Copies de présentation.

Ducobu, F. (2017). Virtual Manufacturing - Notes de cours.

Ducobu, F. (2017). Virtual Manufacturing - Protocoles de travaux pratiques.

Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (16 October 2017). Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters. AIP Conference Proceedings, 1896. doi:10.1063/1.5008036
Peer reviewed

Ducobu, F., Rivière, E., & Filippi, E. (05 September 2017). Reduction of the mesh size influence on the results of a lagrangian finite element machining model. Proceedings of the 14th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2017, 2017, 226-234.
Peer reviewed

Ducobu, F., Rivière, E., & Filippi, E. (01 September 2017). REDUCTION OF THE MESH SIZE INFLUENCE ON THE RESULTS OF A LAGRANGIAN FINITE ELEMENT MACHINING MODEL [Paper presentation]. XIV International Conference on Computational Plasticity. Fundamentals and Applications, Barcelone, Spain.

Ducobu, F., Rivière, E., & Filippi, E. (04 July 2017). Lagrangian Finite Element Machining Model with Damage: a Question of Size [Poster presentation]. The 4th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.

Ozcan, A., Rivière, E., Huynh, H., Ducobu, F., Filippi, E., & Verlinden, O. (04 July 2017). Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs [Poster presentation]. The 4th Researchers' Workshop of the Materials Research Institute, Mons, Belgium.

Equeter, L., Dehombreux, P., Ducobu, F., Rivière, E., & Serra, R. (04 July 2017). Experimental Measurement of Wear Indicators for Estimating the Tool Remaining Useful Life [Poster presentation]. 4ème Journée des Chercheurs de l'Institut Matériaux, UMONS, Belgium.

Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 June 2017). Influence on surface characteristics of Electron Beam Melting process (EBM) by varying the process parameters [Paper presentation]. workshop additive manufacturing, Louvain-la-Neuve, UCL, Belgium.
Peer reviewed

Ducobu, F., Pedro, A., Rivière, E., Ortiz De Zarate, G., Madariaga, A., & Filippi, E. (16 June 2017). The CEL method as an alternative to the current modelling approaches for Ti6Al4V orthogonal cutting simulation. Procedia CIRP, 58, 245-250. doi:10.1016/j.procir.2017.03.188
Peer Reviewed verified by ORBi

Ozcan, A., Rivière, E., Huynh, H., Ducobu, F., Verlinden, O., & Filippi, E. (15 June 2017). Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs. Procedia CIRP, 58, 239-244. doi:10.1016/j.procir.2017.03.187
Peer Reviewed verified by ORBi

Ozcan, A., Rivière, E., Huynh, H. N., Ducobu, F., Verlinden, O., & Filippi, E. (15 June 2017). Modelling of Pocket Milling Operation Considering Cutting Forces and CNC Control Inputs [Paper presentation]. 16th CIRP Conference on Modelling of Machining Operations, CIRP CMMO 2017.

Ducobu, F., Rivière, E., & Filippi, E. (01 June 2017). Mesh influence in orthogonal cutting modelling with the Coupled Eulerian-Lagrangian (CEL) method. European Journal of Mechanics. A, Solids, 65, 324-335. doi:10.1016/j.euromechsol.2017.05.007
Peer Reviewed verified by ORBi

Avez, C., Coussement, G., Debailleux, L., Delaunois, F., Descamps, F., Ducobu, F., Dumont, E., Lupant, D., Rivière, E., & Vitry, V. (01 June 2017). Les techniques optiques de pointe au service de l'Ingénieur. Polytech.News, 55.

Ducobu, F., Arrazola, P., Rivière, E., Ortiz De Zarate, G., Madariaga, A., & Filippi, E. (01 June 2017). The CEL method as an alternative to the current modelling approaches for Ti6Al4V orthogonal cutting simulation [Paper presentation]. 16th CIRP Conference on Modelling of Machining Operations, Cluny, France.

Demarbaix, A., Dolimont, A., & Ducobu, F. (2017). Les fabrications par faisceaux ou comment la lumière participe au façonnage d'une pièce mécanique. Polytech-News, n°55.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (30 May 2017). The Hybrid Machining of Ceramic The choice of production stage [Poster presentation]. euspen's 17th International Conference & Exhibition, Hanovre, Germany.

Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., & Petit, F. (2017). The Hybrid Machining of Ceramic: The choice of production stage. Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, 111-112.
Peer reviewed

Ducobu, F., Rivière, E., & Filippi, E. (28 May 2017). Finite element modelling of 3D orthogonal cutting experimental tests with the Coupled Eulerian-Lagrangian (CEL) formulation. Finite Elements in Analysis and Design, 134, 27-40. doi:10.1016/j.finel.2017.05.010
Peer Reviewed verified by ORBi

Ducobu, F., Rivière, E., & Filippi, E. (01 May 2017). Experimental and numerical investigation of the uncut chip thickness reduction in Ti6Al4V orthogonal cutting. Meccanica, 52, 1577-1592. doi:10.1007/s11012-016-0499-7
Peer reviewed

Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., Vivès, S., Godet, S., Henkes, T., & Filippi, E. (26 April 2017). Influence on surface characteristics of electron beam melting process (EBM) by varying the process parameters [Paper presentation]. 20th International ESAFORM Conference on Material Forming, ESAFORM 2017.

Ozcan, A., Rivière, E., Ducobu, F., Filippi, E., Verlinden, O., & Huynh, H. (07 March 2017). Modélisation macroscopique d'usinage de poche en tenant compte des efforts de coupe et du contrôle [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.

Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (07 March 2017). Influence of process parameters on surface roughness of EBM [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgique, 2017, Mons, Belgium.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (07 March 2017). The Hybrid Machining of Ceramic: The choice of production stage [Poster presentation]. 8e édition montoise du MdC2017, Mons, Belgium.

Equeter, L., Dehombreux, P., Ducobu, F., Rivière, E., & Serra, R. (07 March 2017). Design of Experiment: Wear Indicators for Cutting Tools: Estimate of Tool Remaining Useful Life [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (07 March 2017). Lagrangian Finite Element Machining Model with Damage: a Question of Size [Poster presentation]. Mardi des Chercheurs (MdC2017), Mons, Belgium.

Demarbaix, A., Dolimont, A., Ducobu, F., Equeter, L., Huynh, H., Leroy, C., Ozcan, A., & Rivière, E. (07 March 2017). Manumons: An informal research group gathering the researc activities linked to the manufacturing technologies [Poster presentation]. Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (07 January 2017). On the importance of the choice of the parameters of the Johnson-Cook constitutive model and their influence on the results of a Ti6Al4V orthogonal cutting model. International Journal of Mechanical Sciences, 122, 143-155. doi:10.1016/j.ijmecsci.2017.01.004
Peer Reviewed verified by ORBi

Rivière, E., Letot, C., Ducobu, F., Dehombreux, P., & Filippi, E. (01 January 2017). Dynamic simulation of milling operations with small diameter milling cutters: effect of material heterogeneity on the cutting force model. Meccanica, 52 (1-2), 35-44. doi:10.1007/s11012-016-0398-y
Peer reviewed

Potier, N., Tsongo, J., & Ducobu, F. (2016). Des cours aux concours... nos étudiants se distinguent: Paper Gun. Polytech-News, n°54.

Cherdon, G., & Ducobu, F. (2016). Des cours aux concours... nos étudiants se distinguent: Eurobot. Polytech-News, n°54.

Ducobu, F., & Equeter, L. (2016). Le compagnonnage à la FPMs. Polytech-News, n°54.

Cubo Soto, J., & Ducobu, F. (2016). Développement du projet professionnel: de 3ème bachelier à Ingénieur civil Mécanicien. Polytech-News, n°54.

Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (19 October 2016). Effect of HIPping (Hot Isostatic Pressing) on Electron Beam Melting Ti6Al4V parts after machining. AIP Conference Proceedings, 1769. doi:10.1063/1.4963616
Peer reviewed

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2016). La nuit des chercheurs: L'usinage hybride: Combinaison séquentielle fraisage et usinage laser.

Ducobu, F., Rivière, E., & Filippi, E. (01 September 2016). Application of the Coupled Eulerian-Lagrangian (CEL) method to the modeling of orthogonal cutting. European Journal of Mechanics. A, Solids, 59, 58-66. doi:10.1016/j.euromechsol.2016.03.008
Peer Reviewed verified by ORBi

Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (05 July 2016). Study of the functionalization of electron beam melting part through machining [Paper presentation]. 3rd Researcher's Day of the Materials Research Institute, University of Mons, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (05 July 2016). CEL Modelling of Ti6Al4V Orthogonal Cutting [Poster presentation]. 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (05 July 2016). Hybrid machining on the Y-TZP ceramic: Combination of the milling and the laser machining [Poster presentation]. 3rd Researcher's Day of the Materials Research Institute, Mons, Belgium.

Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (2016). Characterization of electron beam melting process (EBM) : Capability approach. Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing.
Peer reviewed

Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 June 2016). Characterization of electron beam melting process (EBM) : Capability approach [Paper presentation]. ASPE/euspen 2016 Summer Topical Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing.

Symonova, A., Ducobu, F., & Weiss, V. (01 June 2016). The mechanics of machining ultrafine-grained grade 2 Ti processed severe plastic deformtion. Manufacturing Technology, 16, 627-633.
Peer reviewed

Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., Petit, F., & Preux, N. (2016). Development of the hybrid sequential machining: laser machining and milling. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016.
Peer reviewed

Demarbaix, A., Rivière, E., Ducobu, F., Filippi, E., Petit, F., & Preux, N. (30 May 2016). Development of the hybrid sequential machining: Laser machining and milling [Poster presentation]. 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016.

Dolimont, A., Rivière, E., Ducobu, F., & Filippi, E. (27 May 2016). Functionalization of Electron beam melting parts by Machining [Paper presentation]. workshop sur l'additive manufacturing, ULB (Bruxelles), Belgium.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (18 May 2016). Concept of the hybrid machining: the laser machining and milling [Poster presentation]. Matinée des chercheurs, Université de Valenciennes et du Hainaut-Cambrésis, France.

Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (27 April 2016). Effect of HIPping (Hot Isostatic Pressing) on electron beam melting Ti6Al4V parts after machining [Paper presentation]. 19th International ESAFORM Conference on Material Forming, ESAFORM 2016.

Iscaro, A., Truffaut, J.-L., & Ducobu, F. (2016). Le banc moteur, un outil indispensable pour les étudiants participant au concours Shell Eco-marathon. Polytech-News, n°53.

Ducobu, F. (2016). Un Ingénieur de la FPMs dans l'écurie Ferrari en F1. Polytech-News, n°53.

Fleurquin, G., Letot, C., & Ducobu, F. (2016). La maintenance dans le monde ferroviaire : un pari d'avenir. Polytech-News, n°53.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2016). Ma thèse en 180 secondes: L'usinage hybride : Combinaison de deux procédés de fabrication par enlèvement de matière.

Ducobu, F., Rivière, E., & Filippi, E. (01 March 2016). Material constitutive model and chip separation criterion influence on the modeling of Ti6Al4V machining with experimental validation in strictly orthogonal cutting condition. International Journal of Mechanical Sciences, 107, 136-149. doi:10.1016/j.ijmecsci.2016.01.008
Peer Reviewed verified by ORBi

Dolimont, A., Michotte, S., Rivière, E., Ducobu, F., De Formanoir, C., Godet, S., & Filippi, E. (31 January 2016). Characterisation of electron beam melting process on Ti6Al4V in order to guide finishing operation. International Journal of Rapid Manufacturing, 5 (3/4).
Peer reviewed

Dolimont, A., Michotte, S., De Formanoir, C., Rivière, E., Ducobu, F., Godet, S., & Filippi, E. (02 December 2015). L'impact des traitements thermiques et CIC sur la microstructure et les propriétés mécaniques des pièces en TA6V par EBM et contrôle géométrique du procédé pour guider l'usinage [Paper presentation]. A3TS: POST FABRICATION ADDITIVE : QUELS TRAITEMENTS DE FINITION ?, UTBM Sevenans (90), France.

Ducobu, F., Brugmans, M., D'Hondt, Q., Lepine, A., Potier, N., Poulet, N., Thuin, M., & Tsongo, J. (2015). Les projets de l'étudiant mécanicien. Polytech-News, n°52.

Ducobu, F., Dupont, P., & Dupont, L. (2015). Un petit air de Tintin en Mécanique. Polytech-News, n°52.

Descamps, F., Ducobu, F., & Demarbaix, A. (2015). MdC 2015 : un magicien polytechnicien gagne le Premier Prix Show Your PhD. Polytech-News, n°52.

Ducobu, F., Rivière, E., & Filippi, E. (27 July 2015). Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine. International Journal of Material Forming, 8 (3), 455-468. doi:10.1007/s12289-014-1189-4
Peer Reviewed verified by ORBi

Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (30 June 2015). A first step to study numerically the tool wear influence in Ti6Al4V orthogonal cutting [Poster presentation]. 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (30 June 2015). LAMAC: Usinage laser sur de la céramique « crue » [Poster presentation]. The 2nd Researcher's Day of the Materials Research Institute, Mons, Belgium.

Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (11 June 2015). Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining. Procedia CIRP, 31, 124-129. doi:10.1016/j.procir.2015.03.056
Peer Reviewed verified by ORBi

Ducobu, F. (2015). La Matinée des Chercheurs (MdC) 2015. Journal de l'AIMs, Juin 2015.

Ducobu, F. (2015). Le PerSciF-Polytech, au coeur du quotidien des scientifiques de la Faculté. Journal de l'AIMs, Juin 2015.

Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 June 2015). Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining [Paper presentation]. 15th CIRP Conference on Modelling of Machining Operations, Karlsruhe, Germany.

Ducobu, F., & Rivière, E. (26 May 2015). On going topics in modelling of machining [Paper presentation]. Les nouvelles tendances et techniques d'usinage pour le secteur aérospatial, Wavre, Belgium.

Rivière, E., Letot, C., Ducobu, F., & Filippi, E. (17 April 2015). Uncertainty management of cutting forces parameters and its effects on machining stability. Key Engineering Materials, 651-653, 1165-1170. doi:10.4028/www.scientific.net/KEM.651-653.116
Peer Reviewed verified by ORBi

Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (15 April 2015). Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling. Key Engineering Materials, 651-653, 1197-1203. doi:10.4028/www.scientific.net/KEM.651-653.1197
Peer Reviewed verified by ORBi

Ducobu, F., Arrazola, P., Rivière, E., & Filippi, E. (01 April 2015). Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling [Paper presentation]. Esaform 2015, Graz, Austria.

Ducobu, F., Rivière, E., & Filippi, E. (01 April 2015). On the introduction of adaptive mass scaling in a finite element model of Ti6Al4V orthogonal cutting. Simulation Modelling Practice and Theory, 53, 1-14. doi:10.1016/j.simpat.2015.02.003
Peer Reviewed verified by ORBi

Rivière, E., Letot, C., Ducobu, F., & Filippi, E. (01 April 2015). Uncertainty management of cutting forces parameters and its effects on machining stability [Paper presentation]. 18th International ESAFORM Conference on Material Forming, ESAFORM 2015.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (2015). Les trajectoires en usinage laser: Modèle thermique pour controller le taux de matière ablaté.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (10 March 2015). Comparaison de deux technologies de fabrication dans la céramique dentaire : usinage laser et micro-fraisage [Poster presentation]. 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.

Ducobu, F., Pedro, A., Rivière, E., & Filippi, E. (10 March 2015). A numerical model to study the tool wear influence in Ti6Al4V orthogonal cutting [Poster presentation]. Matinée des chercheurs (MDC2015), Mons, Belgium.

Boulvain, J., VanParys, L., Rivière, E., Ducobu, F., & Legrain, H. (02 March 2015). Improvement of underground investigation techniques: a soil model coupling Drucker-Prager & ALE [Poster presentation]. Matinée des chercheurs (MDC2015), Mons, Belgium.

Demarbaix, A., Ducobu, F., Rivière, E., Filippi, E., Petit, F., & Preux, N. (2014). TRAJECTORIES IN LASER MACHINING CERAMICS: THERMAL MODEL TO CONTROL MATERIAL REMOVE RATE [Paper presentation]. Eleventh International Conference on High Speed Machining, Prague, Czechia.

Demarbaix, A., Ducobu, F., Rivière, E., & Filippi, E. (02 July 2014). Modèle thermique par éléments finis de différentes trajectoires en usinage laser [Poster presentation]. 1st Researcher's Day of the Materials Research Institute, Mons, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (02 July 2014). Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine [Poster presentation]. 1st Research Day of the Materials Research Institute, Mons, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (01 April 2014). Numerical contribution to the comprehension of saw-toothed Ti6Al4V chip formation in orthogonal cutting. International Journal of Mechanical Sciences, 81, 77-87. doi:10.1016/j.ijmecsci.2014.02.017
Peer Reviewed verified by ORBi

Ducobu, F. (2013). Notes de laboratoire de SolidWorks 2013 (Dessin Technique) : TP2.

Ducobu, F. (2013). Contribution à l'étude de la formation du copeau de Ti6Al4V en coupe orthogonale. Approches numérique et expérimentale pour la compréhension des mécanismes de coupe macroscopique et microscopique. Polytech News, n° 49.

Ducobu, F. (2013). Notes de laboratoire de SolidWorks 2013 (Dessin Technique) : TP1.

Ducobu, F., Rivière, E., & Filippi, E. (26 September 2013). Experimental contribution to the comprehension of Ti6Al4V saw-toothed chip formation in orthogonal cutting [Poster presentation]. Tenth International Conference on High Speed Machining, Darmstadt, Germany.

Ducobu, F., Rivière, E., & Filippi, E. (25 July 2013). Chip Formation in Micro-cutting. Journal of Mechanics Engineering and Automation, 3, 441-448.
Peer reviewed

Ducobu, F., Rivière, E., & Filippi, E. (13 June 2013). Influence of the Material Behavior Law and Damage Value on the Results of an Orthogonal Cutting Finite Element Model of Ti6Al4V. Procedia CIRP, 8, 378-383. doi:10.1016/j.procir.2013.06.120
Peer Reviewed verified by ORBi

Ducobu, F., Rivière, E., & Filippi, E. (01 June 2013). Influence of the Material Behavior Law and Damage Value on the Results of an Orthogonal Cutting Finite Element Model of Ti6Al4V [Paper presentation]. CIRP Conference on Modeling of Machining Operations, Turin, Italy.

Ducobu, F., Rivière, E., & Filippi, E. (18 April 2013). Approche mésoscopique pour l'étude numérique et expérimentale des mécanismes de coupe macroscopique et microscopique [Paper presentation]. Journée thématique: 'L'usinage des matériaux: de la compréhension des mécanismes aux applications', Mons, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (26 March 2013). A Lagrangian Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V [Paper presentation]. SIMULIA Academic Seminar 2013, Mons, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (06 March 2013). Experimental contribution to the comprehension of Ti6Al4V saw-toothed chip formation mechanisms in orthogonal cutting [Poster presentation]. Matinée des Chercheurs 2013, Mons, Belgium.

Ducobu, F. (2013). Contribution à l'étude de la formation du copeau de Ti6Al4V en coupe orthogonale. Approches numérique et expérimentale pour la compréhension des mécanismes de coupe macroscopique et microscopique [Doctoral thesis, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/35573

Ducobu, F., Rivière, E., & Filippi, E. (2012). Chip Formation in Micro-cutting [Paper presentation]. 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (01 May 2012). Chip Formation in Microcutting [Paper presentation]. 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.

Ducobu, F., Rivière, E., & Filippi, E. (15 March 2012). Dynamic simulation of the micro-milling process including minimum chip thickness. Key Engineering Materials, 504-506, 1269-1274. doi:10.4028/www.scientific.net/KEM.504-506.1269
Peer Reviewed verified by ORBi

Ducobu, F., Rivière, E., & Filippi, E. (14 March 2012). Dynamic simulation of the micro-milling process including minimum chip thickness [Paper presentation]. 15th Conference of the European Scientific Association on Material Forming, ESAFORM 2012.

Ducobu, F., & Letot, C. (2011). I-CARE 333 : une autre idée de la mobilité. Polytech News, n°46.

Ducobu, F. (2011). Notes de laboratoire de SolidWorks 2011 (Dessin Technique) : TP2.

Ducobu, F. (2011). Notes de laboratoire de SolidWorks 2011 (Dessin Technique) : TP1.

Ducobu, F. (2011). Rapport du 4ème Comité d'accompagnement de Thèse - Étude du phénomène de coupe en micro-fraisage par enlèvement de copeaux.

Ducobu, F., Rivière, E., & Filippi, E. (01 June 2011). A Lagrangian FEM Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V [Paper presentation]. CIRP conference on modelling of machining operations, Sintra, Portugal.

Ducobu, F., Rivière, E., & Filippi, E. (12 May 2011). A Lagrangian FEM Model to Produce Saw-toothed Macro-chip and to Study the Depth of Cut Influence on its Formation in Orthogonal Cutting of Ti6Al4V. Advanced Materials Research, 223, 3-11. doi:10.4028/www.scientific.net/AMR.223.3
Peer reviewed

Ducobu, F., Rivière, E., & Filippi, E. (22 March 2011). Simulation de la formation d'un copeau dentelé de Ti6Al4V en coupe orthogonale par la méthode aux éléments finis [Poster presentation]. 6ème édition de la Matinée des Chercheurs (MDC 2011), Mons, Belgium.

Ducobu, F. (2011). Rapport du 3ème Comité d'accompagnement de Thèse - Étude du phénomène de coupe en micro-fraisage par enlèvement de copeaux : Épreuve de confirmation.

Ducobu, F., Rivière, E., & Filippi, E. (2010). An ALE Model to Study the Depth of Cut Influence on Chip Formation in Orthogonal Cutting [Paper presentation]. Eighth International Conference on High Speed Machining, Metz, France.

Ducobu, F., Rivière, E., & Filippi, E. (01 December 2010). An ALE Model to Study the Depth of Cut Influence on Chip Formation in Orthogonal Cutting [Paper presentation]. Eighth International Conference on High Speed Machining, Metz, France.

Ducobu, F. (2010). Notes de laboratoire de SolidWorks 2010 (Dessin Technique) : TP2.

Ducobu, F. (2010). Notes de laboratoire de SolidWorks 2010 (Dessin Technique) : TP1.

Ducobu, F., Rivière, E., & Filippi, E. (15 March 2010). Orthogonal Cutting Simulations with Abaqus/Explicit - Current results [Paper presentation]. Simulia Academic Seminar 2010, Leuven, Belgium.

Ducobu, F., Filippi, E., & Rivière, E. (17 February 2010). Simulation de la coupe orthogonale du Ti6Al4V par la méthode aux éléments finis [Poster presentation]. Matinée des Chercheurs, Bruxelles, Belgium.

Ducobu, F. (2010). Rapport du 2ème Comité d'accompagnement de Thèse - Étude du phénomène de coupe en micro-fraisage par enlèvement de copeaux.

Ducobu, F. (2009). Notes de laboratoire de SolidWorks 2009 (Dessin Technique) : TP2.

Ducobu, F. (2009). Notes de laboratoire de SolidWorks 2009 (Dessin Technique) : TP1.

Ducobu, F., Rivière, E., & Filippi, E. (31 August 2009). Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale [Paper presentation]. 19ème Congrès Français de Mécanique, Marseille, France.

Ducobu, F., Filippi, E., & Rivière, E. (2009). Modélisation de l'influence de la profondeur de coupe en micro-coupe orthogonale [Paper presentation]. Congrès Français de mécanique, Marseille, France.

Ducobu, F., Filippi, E., & Rivière, E. (2009). Investigations on chip formation in micro-milling. Laser Metrology and Machine Performance IX - 9th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2009, 327-336.
Peer reviewed

Ducobu, F., Filippi, E., & Rivière, E. (30 June 2009). Investigations on chip formation in micro-milling [Paper presentation]. International Conference and Exhibition on Laser metrology, machine tool, CMM and robotic performance (LAMDAMAP 2009), Teddington, United Kingdom.

Ducobu, F., Filippi, E., & Rivière, E. (2009). Chip formation in micro-milling [Paper presentation]. National Congress of Theoretical and Applied Mechanics, VUB, Brussels, Belgium.

Ducobu, F., Filippi, E., & Rivière, E. (2009). Chip Formation and Minimum Chip Thickness in Micro-milling [Paper presentation]. CIRP conference on modelling of machining operations, San Sebastian, Spain.

Ducobu, F., Filippi, E., & Rivière, E. (01 May 2009). Chip Formation in Micromilling [Paper presentation]. 8th National Congress on Theoretical and Applied Mechanics, Bruxelles, Belgium.

Ducobu, F., Filippi, E., & Rivière, E. (01 May 2009). Chip Formation and Minimum Chip Thickness in Micro-milling [Poster presentation]. 12th CIRP conference on modelling of machining operations, San Sebastian, Spain.

Ducobu, F., Filippi, E., & Rivière, E. (17 March 2009). Chip Formation and Minimum Chip Thickness in Micro-milling [Poster presentation]. Matinée des chercheurs 2009, Mons, Belgium.

Ducobu, F. (2009). Rapport du 1er Comité d'accompagnement de Thèse - Étude du phénomène de coupe en micro-fraisage par enlèvement de copeaux.

Ducobu, F., Filippi, E., & Rivière, E. (05 November 2008). Phénomènes de coupe en micro-fraisage par enlèvement de copeaux [Paper presentation]. Les thématiques de recherche du Pôle Matériaux en usinage par outils de coupe, Mons, Belgium.

Ducobu, F., & Dehombreux, P. (2008). Cours de Construction des Machines 3 - Liaisons hélicoïdales.

Ducobu, F. (2008). Notes de laboratoire de SolidEdge (Dessin Technique) : TP2.

Ducobu, F. (2008). Notes de laboratoire de SolidEdge (Dessin Technique) : TP1.

Ducobu, F. (2008). Notes de laboratoire de Métrologie : TP4.

Ducobu, F., Filippi, E., & Rivière, E. (26 February 2008). Etude du phénomène de coupe en micro-fraisage par enlèvement de copeaux [Poster presentation]. Matinée des Chercheurs 2008, Bruxelles, Belgium.

Ducobu, F. (2007). Mise au point d'un modèle détaillé permettant le calcul de la consommation d'énergie primaire des pompes à chaleur utilisées pour le chauffage domestique [Master’s dissertation, Université de Mons]. ORBi UMONS-University of Mons. https://orbi.umons.ac.be/handle/20.500.12907/19278

Ducobu, F. (2007). Réalisation de l'étanchéité du différentiel central d'une berline 4x4.

Ducobu, F. (2006). Analyse du différentiel Torsen.

Ducobu, F. (2005). Définition et description des méthodes de fabrication d'un bell de frein.

Ducobu, F. (2004). Réalisation d'un pont.

Contact ORBi UMONS