Profil

Dehombreux Pierre

Université de Mons - UMONS > Faculté Polytechnique > Service de Génie Mécanique

Université de Mons - UMONS > Faculté Polytechnique > Génie Mécanique

ORCID
0000-0002-6218-4736

Main Referenced Co-authors
VERLINDEN, Olivier  (46)
Conti, Calogero  (39)
Letot, Christophe  (33)
EQUETER, Lucas  (29)
RIVIERE LORPHEVRE, Edouard  (29)
Main Referenced Keywords
Maintenance (3); Simulation (3); Maintenance optimisation (2); Monte Carlo (2); Qualité (2);
Main Referenced Unit & Research Centers
CRIM - Ingénierie des matériaux (15)
BIOSYS - Biosys (9)
Main Referenced Disciplines
Physics (86)
Mechanical engineering (84)
Mathematics (52)
Computer science (11)
Materials science & engineering (10)

Publications (total 154)

The most downloaded
44 downloads
Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (10 December 2021). A Systematic Literature Review of Cutting Tool Wear Monitoring in Turning by Using Artificial Intelligence Techniques. Machines, 9 (351), 1-54. doi:10.3390/machines9120351 https://hdl.handle.net/20.500.12907/8890
The most cited
68 citations (Scopus®)
de Arizon, J., Verlinden, O., & Dehombreux, P. (01 September 2007). Prediction of wheel wear in urban railway transport: comparison of existing models. Vehicle System Dynamics, 45 (9), 849-874. https://hdl.handle.net/20.500.12907/34296

Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (24 November 2022). Cutting Tool Health Monitoring in Turning with Artificial Intelligence Technique. Paper presented at 6th International Conference on System Reliability and Safety, Venise, Italy.
Peer reviewed

Abdmeziane, M., Baudoux Augustin, Van Hee Martin, Dehombreux, P., & Spitaels, L. (2022). Redonner des ailes au Moulin de Blaton Un projet collaboratif de conception à l’UMONS. Paper presented at Conférence de presse sur le projet de réhabilitation du moulin de Blaton.

Equeter, L., Tiberi, L., & Dehombreux, P. (06 September 2022). The ecosystem of Industry 5.0: toward radical changes in industry? Poster session presented at Mardi des Chercheurs, Mons, Belgium.

Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (06 September 2022). Predicting the Health of Cutting Tools with Artificial Intelligence. Poster session presented at Mardi des Chercheurs 2022 (MdC2022).

Equeter, L.* , Do, P.* , Dehombreux, P., & Iung, B. (2022). Opportunistic maintenance for multi-component system with structural dependence under resource constraints. In M. C. Leva, E. Patelli, L. Podofillini, & S. Wilson (Eds.), Book of Extended Abstracts for the 32nd European Safety and Reliability Conference (ESREL 2022) (pp. 21-22). Singapour, Singapore: Research Publishing.
Peer reviewed
* These authors have contributed equally to this work.

Dehombreux, P.* , Equeter, L.* , & Colantonio, L. (2022). OPPORTUNISTIC MAINTENANCE: A NEWER NAME TO GOOD PRACTICE. Assets Performance Magazine, p. 36-40.
* These authors have contributed equally to this work.

Dehombreux, P. (2022). Le développement durable au profit des activités de maintenance. Paper presented at Forum wallon de la maintenance, Charleroi, Belgium.

Colantonio, L., Dehombreux, P., Hajzman, M., & Verlinden, O. (2022). 3D projection of the LuGre friction model adapted to varying normal forces. Multibody System Dynamics.
Peer reviewed

Colantonio, L., Dehombreux, P., Hajzman, M., & Verlinden, O. (2021). 3D LuGre Model for Multibody Systems Involving Contacts with Stick-slip. Paper presented at ECCOMAS Thematic Conference on Multibody Dynamics, Budapest, Hungary.

Colantonio, L., Equeter, L., Dehombreux, P., & Ducobu, F. (10 December 2021). A Systematic Literature Review of Cutting Tool Wear Monitoring in Turning by Using Artificial Intelligence Techniques. Machines, 9 (351), 1-54. doi:10.3390/machines9120351
Peer Reviewed verified by ORBi

Aubert, A., Dehombreux, P., & El Hiki, L. (07 October 2021). Approche CDIO pour le déploiement d’un système qualité universitaire au Cameroun. Paper presented at International conference on High Technology for Sustainable Development HiTech 2021, Sofia, Bulgaria.
Editorial reviewed

Equeter, L., Ducobu, F., & Dehombreux, P. (29 June 2021). A time-dependent Proportional Hazard model for cutting tools Remaining Useful Life estimate under varying cutting parameters. Paper presented at 11th IMA International Conference on Modelling in Industrial Maintenance and Reliability (MIMAR), Nottingham, Unknown/unspecified.

Rivière, E., Broz Lofetigo, A., Dehombreux, P., Dvorak, J., Equeter, L., Hosnedl, S., Marketa, K., Lazaroi Lechuga, E., Lindell, M., Lindgern, P., Nemec, L., Neuvonen, T., Olivier, B., Ranalli, M., Varhelahti, M., Varona Alabern, M., Verlinden, O., & Cepickova, J. (2021). MUPIC: MULTIDISCIPLINARY PROJECT IN AN INTERNATIONAL CONTEXT. In Hans-Ulrich Heiss (Ed.), Proceedings of SEFI 49th Annual Conference Blended Learning in Engineering Education: challenging, enlightening – and lasting?Berlin, Unknown/unspecified: Technische universitat Berlin.
Peer reviewed

Equeter, L., Ducobu, F., & Dehombreux, P. (18 December 2020). Cutting Tools Replacement: Toward a Holistic Framework. IFAC-PapersOnLine, 53 (3), 227-232. doi:10.1016/j.ifacol.2020.11.037
Peer reviewed

Equeter, L., & Dehombreux, P. (2020). MUPIC Module 3 video: a methodology for product design.

Spitaels, L., Ducobu, F., Demarbaix, A., Rivière, E., & Dehombreux, P. (27 April 2020). Influence of conventional machining on chemical finishing of Ti6Al4V Electron Beam Melting parts. Procedia Manufacturing, 47, 1036-1042. doi:10.1016/j.promfg.2020.04.321
Peer reviewed

Equeter, L., Ducobu, F., Rivière, E., Serra, R., & Dehombreux, P. (27 March 2020). An Analytic Approach to the Cox Proportional Hazards Model for Estimating the Lifespan of Cutting Tools. Journal of Manufacturing and Materials Processing, 4 (27), 1-13. doi:10.3390/jmmp4010027
Peer Reviewed verified by ORBi

Dehombreux, P. (19 November 2019). Industrie 1.2.3.4...0 Quelles évolutions pour la maintenance? Paper presented at Forum BEMAS, Marcinelle, Belgium.

Dutoit, C., Dehombreux, P., Rivière, E., & Equeter, L. (2019). Statistical Process Control and Maintenance Policies for Continuous Production Systems Subjected to Different Failure Impact Models: Literature Review. Procedia CIRP. doi:10.1016/j.procir.2020.01.050
Peer Reviewed verified by ORBi

Equeter, L., Ducobu, F., Rivière, E., & Dehombreux, P. (02 October 2019). An Integrative Approach for Estimating Cutting Tools Wear in Turning. Poster session presented at MS&T2019, Portland, United States - Oregon.

Equeter, L., Devlamincq, R., Ducobu, F., Dutoit, C., & Dehombreux, P. (02 October 2019). Cutting Inserts Wear Monitoring in AISI 1045 Dry Longitudinal Turning through Cutting Forces: a Case Study. Paper presented at MS&T2019, Portland, United States - Oregon.

Demarbaix, A., Rivière, E., & Dehombreux, P. (2019). UMONS: Plongée en sous-marin. journal sudinfo.

Demarbaix, A., Dehombreux, P., & Filippi, E. (15 March 2019). FabLab Mons: Un outil pédagogique. Poster session presented at 3ème Journée des Enseignants de l'UMONS, Mons, Belgium.

Equeter, L., Dutoit, C., Ducobu, F., & Dehombreux, P. (05 March 2019). Estimation de l'usure des outils coupants en tournage. Poster session presented at Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.

Dutoit, C., Dehombreux, P., & Equeter, L. (05 March 2019). Optimisation de la maintenance grâce à l'utilisation des cartes de contrôle adaptées. Poster session presented at Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.

Demarbaix, A., Dehombreux, P., & Filippi, E. (05 March 2019). FabLab Mons: Un outil à la recherche. Poster session presented at Mardi des Chercheurs 2019 (MdC2019), Mons, Belgium.

Dehombreux, P., Dutoit, C., Equeter, L., Rivière, E., & Ducobu, F. (17 October 2018). Industrie 1.2.3.4.0 : quelle évolution pour la fonction maintenance? Paper presented at Colloque international : Transformation Numérique des Entreprises - Industrie 4.0, Ecole Centrale Casablanca, Morocco.

Dutoit, C., Dehombreux, P., & Rivière, E. (2018). Using quality control in optimizing opportunistic maintenance. IFAC Proceedings Volumes.
Peer reviewed

Equeter, L., Ducobu, F., Rivière, E., Abouridouane, M., Klocke, F., & Dehombreux, P. (23 April 2018). Estimation of the Influence of Tool Wear on Force Signals: a Finite Element Approach in AISI 1045 Orthogonal Cutting. AIP Conference Proceedings, 1960 (070012). doi:10.1063/1.5034908
Peer Reviewed verified by ORBi

Dutoit, C., Dehombreux, P., & Equeter, L. (27 March 2018). Etude de l'optimisation combinée de la maintenance et de la qualité pour un système de production par lots. Poster session presented at Mardi des Chercheurs 2018, Valenciennes, France.

Equeter, L., Letot, C., Dutoit, C., Serra, R., Ducobu, F., & Dehombreux, P. (27 March 2018). Use of a Stochastic Model for Updated Remaining Useful Life Estimates. Poster session presented at Mardi des Chercheurs (MdC2018), Valenciennes, France.

Letot, C., Equeter, L., Dutoit, C., & Dehombreux, P. (2017). Updated operational reliability from degradation indicators and adaptive maintenance. In C. Volosescu (Ed.), System Reliability (pp. 67-91). Intech.

Equeter, L., Letot, C., Dutoit, C., Dehombreux, P., & Serra, R. (2017). Cutting tool life management in turning process: a new approach based on a stochastic wear process and the Cox model. Paper presented at 12ème Congrès International Pluridisciplinaire en Qualité, Sûreté de Fonctionnement et Développement Durable : QUALITA'2017, Bourges, France.

Dutoit, C., Letot, C., Equeter, L., & Dehombreux, P. (2017). Utilisation du Contrôle Qualité dans l'Optimisation de la Maintenance. Paper presented at 12ème Congrès International Pluridisciplinaire en Qualité, Sûreté de Fonctionnement et Développement Durable : QUALITA'2017, Bourges, France.

Equeter, L., Dehombreux, P., Ducobu, F., Rivière, E., & Serra, R. (04 July 2017). Experimental Measurement of Wear Indicators for Estimating the Tool Remaining Useful Life. Poster session presented at 4ème Journée des Chercheurs de l'Institut Matériaux, UMONS, Belgium.

Letot, C., Fleurquin, G., Lesage, A., & Dehombreux, P. (20 April 2017). An adaptive degradation-based maintenance model taking into account both imperfect adjustments and AGAN replacements. Quality and Reliability Engineering International, TBD (TBD). doi:10.1002/qre.2166
Peer Reviewed verified by ORBi

Dutoit, C., & Dehombreux, P. (07 March 2017). Utilisation du contrôle qualité dans l'optimisation de la maintenance. Poster session presented at 8e édition montoise du MdC2017, Mons, Belgium.

Equeter, L., Dehombreux, P., Ducobu, F., Rivière, E., & Serra, R. (07 March 2017). Design of Experiment: Wear Indicators for Cutting Tools: Estimate of Tool Remaining Useful Life. Poster session presented at Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.

Dehombreux, P. (07 March 2017). Outils qualité dans l'optimisation de la maintenance. Poster session presented at MDC : Mardi des Chercheurs 2017, Mons, Belgium.

Letot, C., & Dehombreux, P. (07 March 2017). An adaptive degradation-based maintenance model with both imperfect repairs and AGAN replacements. Poster session presented at Huitième édition montoise du MdC : le Mardi des Chercheurs 2017, UMons, Belgium.

Rivière, E., Letot, C., Ducobu, F., Dehombreux, P., & Filippi, E. (01 January 2017). Dynamic simulation of milling operations with small diameter milling cutters: effect of material heterogeneity on the cutting force model. Meccanica, 52 (1-2), 35-44. doi:s11012-016-0398-y
Peer reviewed

Letot, C., Soleimanmeigouni, I., Ahmadi, A., & Dehombreux, P. (19 October 2016). An adaptive opportunistic maintenance model based on railway track condition prediction. IFAC Proceedings Volumes, 49 (28), 120-125. doi:10.1016/j.ifacol.2016.11.021
Peer reviewed

Letot, C., Soleimanmeigouni, I., Arasteh Khouy, I., Ahmadi, A., & Dehombreux, P. (2016). Comparaison des processus gamma et Wiener pour modéliser la dégradation de géométrie de voies ferroviaires. Paper presented at Lambda Mu 20 'Maîtriser les risques dans un monde en mouvement', Saint-Malo, France.

Equeter, L., Letot, C., Serra, R., & Dehombreux, P. (05 July 2016). Simulation of Wear and Survival Analysis of Cutting Tools in Gray Cast Iron Turning. Poster session presented at Troisième Journée des Chercheurs de l'Institut Matériaux, Mons, Belgium.

Equeter, L., Letot, C., Serra, R., & Dehombreux, P. (27 June 2016). Estimate of Cutting Tool Lifespan through Cox Proportional Hazards Model. IFAC-PapersOnLine, 49 (28), 238-243. doi:10.1016/j.ifacol.2016.11.041
Peer reviewed

Equeter, L., Letot, C., Serra, R., & Dehombreux, P. (18 May 2016). Estimate of Cutting Tools Lifetime through Cox Proportional Hazards Model. Poster session presented at Matinée des Chercheurs 2016, Valenciennes, France.

Letot, C., Serra, R., Equeter, L., & Dehombreux, P. (2016). Apport des modèles physiques de défaillance et des processus stochastiques pour la prédiction de la durée de vie d'outils de coupe. Paper presented at 9e Journées Nationales Fiabilité des Matériaux et des Structures - JFMS2016, Nancy, France.

Letot, C., Serra, R., Dossevi, M., & Dehombreux, P. (16 December 2015). Cutting tools reliability and residual life prediction from degradation indicators in turning process: A case study involving four approaches. International Journal of Advanced Manufacturing Technology, 86 (1), 495-506. doi:10.1007/s00170-015-8158-z
Peer Reviewed verified by ORBi

Lesage, A., & Dehombreux, P. (2015). Optimisation conjointe des stratégies de maintenance et de contrôle qualité : modèle intégrant la maintenance imparfaite. Paper presented at 11ème Congrès International de Génie Industriel (CIGI2015), Québec, Canada.

Letot, C., & Dehombreux, P. (2015). Modèle de maintenance adaptative imparfaite pour des équipements sujets à la dégradation. Paper presented at 11ème Congrès International de Génie Industriel (CIGI2015), Québec, Canada.

Mahamoud, N. Y., Dehombreux, P., Pirlot, M., & Robleh, H. E. (2015). Maintenance policy selection from a limited number of decision criteria. A case study: an application of the ELECTRE II method for selecting the best maintenance policy for hydraulic couplings. Paper presented at 11ème Congrès International de Génie Industriel (CIGI2015), Québec, Canada.

Letot, C., Dersin, P., Pugnaloni, M., Dehombreux, P., Fleurquin, G., Douziech, C., & La-Cascia, P. (15 October 2015). A data driven degradation-based model for the maintenance of turnouts: a case study. IFAC Proceedings Volumes, 48 (21), 958-963. doi:10.1016/j.ifacol.2015.09.650
Peer reviewed

Letot, C., Dersin, P., Pugnaloni, M., Dehombreux, P., Fleurquin, G., Douziech, C., & La-Cascia, P. (2015). A data driven degradation-based model for the maintenance of turnouts: a case study. Paper presented at 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes SAFEPROCESS'15, Paris, France.

Mahamoud, N. Y., Dehombreux, P., Pirlot, M., & Robleh, H. E. (01 April 2015). Évaluation multicritère d'aide à la décision pour le choix d'une politique de maintenance industrielle. Revue Universitaire de Djibouti, 1 (8), 1-9.

Lesage, A., & Dehombreux, P. (2015). Simulation de Procédés de Fabrication Soumis à la Maintenance et au Contrôle Qualité. Paper presented at QUALITA'2015-11ème Congrès International Pluridisciplinaire en Qualité, Sûreté de Fonctionnement et Développement Durable, Nancy, France.

Dehombreux, P. (10 March 2015). Decision support model for maintenance policy selection issue. Poster session presented at Matinée des Chercheurs 8, Umons-Mons, Belgium.

Fleurquin, G., & Dehombreux, P. (10 March 2015). Simulation à événements discrets : Optimiser la maintenance et la production. Poster session presented at 8ème édition de la Matinée des Chercheurs 2015 (MdC2015), Mons, Belgium.

Lesage, A., & Dehombreux, P. (01 March 2015). Simulation of Manufacturing Processes Subject to Maintenance and Quality Control: Sensitivity Analysis and Numerical Example. International Journal of Mechanical Engineering and Automation, 2 (3), 119-126.
Peer reviewed

Letot, C., Dehombreux, P., Rivière, E., Fleurquin, G., & Lesage, A. (01 March 2015). A degradation model for maintenance improvement in respect of cost and availability. Journal of Quality in Maintenance Engineering, 21 (1), 55 - 69. doi:10.1108/JQME-01-2013-0001
Peer Reviewed verified by ORBi

Kouroussis, G., Dehombreux, P., & Verlinden, O. (01 January 2015). Vehicle and powertrain dynamics analysis with an automatic gearbox. Mechanism and Machine Theory, 83, 109-124.
Peer Reviewed verified by ORBi

Martinez, A., Letot, C., Serra, R., & Dehombreux, P. (2014). Maîtrise de l'estimation de l'usure des plaquettes de coupe en usinage. Paper presented at MUGV 2014, Clermont-Ferrand, France.

Letot, C., Dehombreux, P., & Serra, R. (01 September 2014). Estimer la durée de vie des plaquettes d'usinage à partir de données de dégradation. Essais & Simulations sciences et techniques en environnement pour les laboratoires et l'industrie, 118 (1), 24-28.

Kouroussis, G., Dehombreux, P., & Verlinden, O. (2014). Multibody modelling of an automatic gearbox: calculation of acceleration performance. Paper presented at 3rd Joint International Conference on Multibody System Dynamics and the 7th Asian Conference on Multibody Dynamics, Busan, South Korea.

Rivière, E., Filippi, E., & Dehombreux, P. (2014). Construction des machines et procédés de fabrication : Notes de cours.

Rivière, E., Filippi, E., & Dehombreux, P. (21 April 2013). Numerical simulation of machining operations on flexible parts. Key Engineering Materials, 554-557, 1984-1991. doi:10.4028/www.scientific.net/KEM.554-557.1984
Peer Reviewed verified by ORBi

Letot, C., & Dehombreux, P. (2012). Actualized reliability model based on degradation data and maintenance optimization. Paper presented at 2nd IFAC Workshop on Advanced Maintenance Engineering, Services and Technology (A-MEST'12), Sevilla, Spain.

Letot, C., Serra, R., & Dehombreux, P. (2012). Fiabilité actualisée de plaquettes d'usinage afin d'estimer leur durée de vie à partir de données de dégradation. Paper presented at Lambda Mu 18 'La maîtrise des risques des systèmes complexes', Tours, France.

Bruyninckx, M., & Dehombreux, P. (30 August 2012). Les activités de coopération à l'UMONS. Élement: le Magazine de l'Université de Mons, 7, 4-5.

Lesage, A., & Dehombreux, P. (2012). Maintenance and Quality Control: A First Methodological Approach for Maintenance Policy Optimization. Paper presented at 14th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2012), Bucharest, Romania.

Letot, C., & Dehombreux, P. (2012). Dynamic reliability degradation-based models and maintenance optimization. Paper presented at 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.

Lesage, A., & Dehombreux, P. (2012). Simulation of manufacturing processes subject to maintenance actions and quality control. Paper presented at 9th National Congress on Theoretical and Applied Mechanics (NCTAM2012), Brussels, Belgium.

Letot, C., Dehombreux, P., Fleurquin, G., & Rivière, E. (2011). Roller bearings lifetime under different load conditions by a semi-Markovian approach. Paper presented at 41st ESReDA Conference Advances in Reliability-based Maintenance Policies, La Rochelle, France.

Kilundu Y'E Bondo, B., Chiementin, X., & Dehombreux, P. (01 October 2011). Singular Spectrum Analysis for Bearing Defect Detection. Journal of Vibration and Acoustics, 133.
Peer Reviewed verified by ORBi

Dehombreux, P. (22 July 2011). Evaluation of the Performance of Infrared Thermography for on-Line Condition Monitoring of Rotating Machines. Engineering, 3 (11), 1-11. doi:10.4236/eng.2011.310128
Peer reviewed

Rivière, E., Filippi, E., & Dehombreux, P. (2011). Experimental investigation of parameter-dependent analytical cutting force models for the simulation of the milling process. Paper presented at Esaform 2011, Queen's University, Belfast, Unknown/unspecified. doi:10.1063/1.3589577

Rivière, E., Filippi, E., & Dehombreux, P. (07 April 2011). Experimental study of parameter-dependent analytical cutting force model. Paper presented at Matinée des chercheurs, UMONS, Belgium.

Dehombreux, P., & Fleurquin, G. (22 March 2011). Optimisation de la maintenance: Cas de lignes continues de production d'acier. Poster session presented at 6ème édition de la Matinée des Chercheurs (MDC 2011), Mons, Belgium.

Dehombreux, P., Fleurquin, G., & Riane, F. (2011). Optimisation of Maintenance Policies through Simulation. In Maintenance Modelling and Applications (pp. 377-396). Det Norske Veritas.

Kilundu Y'E Bondo, B., Dehombreux, P., & Chiementin, X. (10 December 2010). Tool wear monitoring by machine learning techniques and singular spectrum analysis. Mechanical Systems and Signal Processing, 25 (1), 400-415.
Peer Reviewed verified by ORBi

Chiementin, X., Kilundu Y'E Bondo, B., Dron, J.-P., Dehombreux, P., & Debray, K. (12 November 2010). Effect of cascade methods on vibration defects detection. Journal of Vibration and Control, 17 (4), 567-577. doi:10.1177/1077546310362447
Peer Reviewed verified by ORBi

Letot, C., & Dehombreux, P. (2010). Reliability assessment from degradation models. Paper presented at 3rd International Conference on Accelerated Life Testing, Reliability-based Analysis and Design, Clermont Ferrand, France.

Letot, C., Dehombreux, P., & Fleurquin, G. (2010). Reliabilitix, un outil d'optimisation de la maintenance basé sur la fiabilité. Paper presented at Symposium international 'Maintenance et maîtrise des risques', Rabat, Morocco.

Fleurquin, G., Lesenne, J.-M., Dehombreux, P., & Rivière, E. (2009). Optimisation de la maintenance de lignes continues de production. Paper presented at PErformances et Nouvelles TechnolOgies en Maintenance, Autrans, France.

Letot, C., & Dehombreux, P. (2009). Modèles de dégradation pour l'estimation de la fiabilité et de la durée de vie résiduelle : applications à la fissuration. Paper presented at 4ème édition du Congrès PENTOM, Autrans, France.

Zhang, Z., Riane, F., Dehombreux, P., Kilundu Y'E Bondo, B., & Choteau, F. (2009). Development of an e-Platform for Managing Maintenance Operations. Paper presented at 4ème édition du Congrès PENTOM, Autrans, France.

Letot, C., & Dehombreux, P. (2009). A toolbox to assess reliability and degradation models. Paper presented at 2nd Symposium EUREKA ETE, Bruxelles, Belgium.

Basile, O., Dehombreux, P., & Filippi, E. (2009). On the Reliability of Mechanical Systems under Variable Constraints. In Recent Advances in Maintenance and Infrastructure Management (pp. 21-34). Springer.

Riane, F., Roux, O., Basile, O., & Dehombreux, P. (2009). Simulation Based Approaches for Maintenance Strategies Optimization. In Handbook of Maintenance Management and Engineering (pp. 133-153). doi:10.1007/978-1-84882-472-0_7

Fleurquin, G., Letot, C., Dehombreux, P., & Riane, F. (2009). Assessing uncertainty from data collection to maintenance optimization. Paper presented at International Conference on Reliability, Maintainability and Safety, Chengdu, China.

Kilundu Y'E Bondo, B., Dehombreux, P., Mbusa, V., & Chiementin, X. (2009). Decision trees and ICT for rolling bearing monitoring. Paper presented at International Congress Condition Monitoring and Diagnostic Engineering Management, .

Letot, C., & Dehombreux, P. (2009). Degradation models for reliability estimation and mean residual lifetime. Paper presented at National Congress of Theoretical and Applied Mechanics, VUB, Brussels, Belgium.

Kilundu Y'E Bondo, B., Dehombreux, P., & Letot, C. (2009). Estimation des seuils de surveillance vibratoire sur base d'arbres de décision et d'historiques de mesures. Paper presented at Congrès international sur l'ingénierie des risques industriels, Reims, France.

Leviel, I., Lagoutte, S., Lemaire, B., Mbusa, V., Dehombreux, P., & Verlinden, O. (2009). Acquisition et traitement de données vibratoires en temps réel. Paper presented at Congrès international sur l'ingénierie des risques industriels, Reims, France.

Rivière, E., Filippi, E., & Dehombreux, P. (15 April 2009). Identification de modèles d'efforts de coupe en fraisage. Poster session presented at Lab' insight, Louvain-la-Neuve, Belgium.

Kilundu Y'E Bondo, B., Dehombreux, P., Letot, C., & Chiementin, X. (01 April 2009). Early detection of bearing damage by means of decision trees. Journal of Automation, Mobile Robotics and Intelligent Systems, 3 (3), 70-74.
Peer Reviewed verified by ORBi

Ducobu, F., & Dehombreux, P. (2008). Cours de Construction des Machines 3 - Liaisons hélicoïdales.

Mbusa, V., Kilundu Y'E Bondo, B., & Dehombreux, P. (30 October 2008). L'analyse vibratoire au service du diagnostic des machines. Paper presented at Séminaire sur la Maintenance et la Maîtrise des Risques, Rabat, Morocco.

Kilundu Y'E Bondo, B., Dehombreux, P., Letot, C., & Chiementin, X. (2008). Early detection of bearing damage by means of decision trees. Paper presented at IFAC Conference on Intelligent Manufacturing Systems, .

Fleurquin, G., Dehombreux, P., & Dersin, P. (2008). Impact of uncertainty affecting reliability models on warranty contracts. Paper presented at Joint ESREL 2008 and 17th SRA-Europe Annual Conference, Valencia, Spain.

Kilundu Y'E Bondo, B., & Dehombreux, P. (31 January 2008). Analyse spectrale singulière des signaux vibratoires et machine learning pour la surveillance d'usure d'outils. Mécanique and Industries, 9 (1), 1-8.
Peer Reviewed verified by ORBi

Kilundu Y'E Bondo, B., & Dehombreux, P. (31 January 2008). Data mining techniques and singular spectrum analysis for tool condition monitoring in metal cutting. International Review of Mechanical Engineering, 2 (1), 49-55.
Peer Reviewed verified by ORBi

de Arizon, J., Verlinden, O., & Dehombreux, P. (01 September 2007). Prediction of wheel wear in urban railway transport: comparison of existing models. Vehicle System Dynamics, 45 (9), 849-874.
Peer Reviewed verified by ORBi

Rivière, E., de Arizon, J., Filippi, E., & Dehombreux, P. (2007). Cutting forces parameters evaluation in milling using genetic algorithm. Paper presented at 10th CIRP International Workshop on Modeling of Machining Operations, Scilla, Reggio Calabria, Italy.

Rivière, E., Filippi, E., & Dehombreux, P. (12 March 2007). Etude et simulation des procédés d'usinage à grande vitesse. Poster session presented at Matinée de Chercheurs de la Faculté Polytechnique de Mons, Mons, Belgium.

Rivière, E., Filippi, E., & Dehombreux, P. (12 February 2007). Inverse method for cutting forces parameters evaluation. Engineering Mechanics: Journal for Theoretical and Applied Mechanics, 14 (5), 1-13.
Peer reviewed

Fleurquin, G., Roland, B., Basile, O., Riane, F., & Dehombreux, P. (01 January 2007). OPTIMAIN: plate-forme d'élaboration de stratégies de maintenance pour la gestion des systèmes complexes. Revue Française de Gestion Industrielle, 26 (1), 25-45.
Peer reviewed

Rivière, E., Filippi, E., & Dehombreux, P. (01 January 2007). Chatter prediction using dynamic simulation. International Review of Mechanical Engineering, 1 (1), 78-86.
Peer Reviewed verified by ORBi

Fleurquin, G., Dehombreux, P., Basile, O., Roland, B., & Riane, F. (2006). Aide à la décision pour l'optimisation de politiques de maintenance. Paper presented at Symposium international 'Maintenance et maîtrise des risques', Rabat, Morocco.

Rivière, E., Stalon, V., Vandenabeele, O., Filippi, E., & Dehombreux, P. (2006). Chatter detection using a microphone. Paper presented at NCTAM 2006 (mai), .

Rivière, E., Filippi, E., & Dehombreux, P. (2006). Forces, vibrations and roughness prediction in milling using dynamic simulation. Paper presented at NCTAM 2006 (mai), .

Rivière, E., Filippi, E., & Dehombreux, P. (16 May 2006). Forces, vibrations and roughness prediction in milling using dynamic simulation. Paper presented at 7th National Congress on theoretical and applied Mechanics (NCTAM 2006), Mons, Belgium.

Rivière, E., Stalon, V., Vandenabeele, O., Filippi, E., & Dehombreux, P. (16 May 2006). Chatter detection using a microphone. Paper presented at 7th National Congress on theoretical and applied Mechanics (NCTAM 2006), Mons, Belgium.

Rivière, E., Filippi, E., & Dehombreux, P. (2006). Forces, vibrations and roughness prediction in milling using dynamic simulation. Paper presented at Cinquième Conférence Internationale sur l'usinage à grande vitesse (HSM 2006), Metz, France.

Algrain, H., Conti, C., Dehombreux, P., Hadjit, R., & Verlinden, O. (01 January 2000). Review of the method for the identification of excitation forces. Paper presented at VIII International Conference on the Theory of Machines and Mechanisms, Czechia.

Algrain, H., Conti, C., & Dehombreux, P. (1998). A comparison of FRF based error localisation methods. Paper presented at International Conference on Noise and Vibration Engineering (ISMA 23), Leuven, Belgium.

Verlinden, O., Dehombreux, P., & Conti, C. (1998). A practical reduction for flexible multibody systems. Paper presented at ACOMEN 98 - Advanced Computational Methods in Engineering, Gand, Belgium.

Verlinden, O., Dehombreux, P., & Conti, C. (1997). New component modes for flexible multibody systems. Paper presented at 16th ASME Biennial Conference on Mechanical Vibration and Noise, Sacramento, United States.

Hadjit, R., Conti, C., Dehombreux, P., & Verlinden, O. (1997). Exploitation des réponses en fonctionnement en vue de l'identification des forces d'excitation agissant sur des structures mécaniques. Paper presented at 3ème Colloque national en calcul des structures, Giens, France.

Hadjit, R., Dehombreux, P., & Conti, C. (1997). Indirect identification of excitation forces from measured operational response data. Paper presented at 4th National Congress on Theoretical and Applied Mechanics, Leuven, Belgium.

Cambier, F., Dehombreux, P., Verlinden, O., & Conti, C. (01 January 1997). Equivalence criteria between mechanical environments. European Journal of Mechanical Engineering, 41 (4), 219-226.
Peer reviewed

Wang, D., Conti, C., Dehombreux, P., & Verlinden, O. (01 January 1997). A computer-aided simulation approach for mechanisms with time-varying topology. Computers and Structures, 64 (1-4), 519-530.
Peer Reviewed verified by ORBi

Dehombreux, P., Verlinden, O., & Conti, C. (01 January 1997). An Implicit Multistage Method including Projection for the Numerical Simulation of Constrained Multibody Systems. Multibody System Dynamics, 1, 405-424.
Peer reviewed

Dehombreux, P., Verlinden, O., & Conti, C. (1996). On the concept of numerical stability for integration schemes in non-linear dynamics. Paper presented at 2nd European Oscillation Conference, Prague, Czechia.

Verlinden, O., Conti, C., & Dehombreux, P. (1996). Application of rigid-body analysis for the choice of component modes in flexible multibody systems. Paper presented at International Conference on Computational Structures Technology, Budapest, Hungary.

Dehombreux, P., Verlinden, O., & Conti, C. (1996). A robust self-starting implicit time integration scheme including constraint projection for the simulation of multibody systems. Paper presented at 10th European Simulation Multiconference, Budapest, Hungary.

Verlinden, O., Dehombreux, P., & Conti, C. (1996). Flexible multibody systems: modal synthesis. Paper presented at 6th International Symposium on Measurement and Control in Robotics, Bruxelles, Belgium.

Datoussaïd, S., Verlinden, O., Dehombreux, P., & Conti, C. (1996). Optimal design of multibody systems. Paper presented at 3rd International Conference on Dynamics and Control of Structures in Space, Londres, Unknown/unspecified.

Cambier, F., Dehombreux, P., Verlinden, O., & Conti, C. (01 January 1996). Equivalence criteria between mechanical environments. European Journal of Mechanical and Environmental Engineering, 41 (4), 219-226.
Peer reviewed

Wang, D., Conti, C., Dehombreux, P., & Verlinden, O. (01 January 1996). Computer-aided simulation approach for mechanisms with time-varying topology. European Journal of Mechanical Engineering, 41 (3), 145-151.
Peer reviewed

Conti, C., Dehombreux, P., Verlinden, O., & Datoussaïd, S. (01 January 1996). Analysis of the Performance of Operational Data Analysis Methods. Mechanical Systems and Signal Processing, 10 (5), 579-593.
Peer Reviewed verified by ORBi

Datoussaïd, S., Dehombreux, P., Verlinden, O., & Conti, C. (1995). Optimisation du comportement dynamique de mécanismes à structure cinématique fermée. Paper presented at Congrès StruCoMe, Paris, France.

Conti, C., Wang, D., Dehombreux, P., & Verlinden, O. (1995). Simulation cinématique et dynamique de mécanismes présentant des liaisons de contact conduisant à une topologie variable. Paper presented at 12ème Congrès Français de Mécanique, Strasbourg, France.

Verlinden, O., Dehombreux, P., Datoussaïd, S., & Conti, C. (1995). Track-to-wheelset and road-to-wheel elements for modelling vehicles with relative coordinates. Paper presented at International Scientific Conference - Transport session, University of Ostrava, Czechia.

Dehombreux, P., Verlinden, O., & Hadjit, R. (1995). Des schémas d'intégration pour la simulation des systèmes multicorps contraints. Paper presented at 2ème Colloque national en calcul des structures, Giens, France.

Conti, C., Dehombreux, P., Verlinden, O., & Datoussaïd, S. (1995). Analysis of the performance of Operational Data Analysis Methods. Paper presented at International Conference on Vibration and Noise, Venise, Italy.

Conti, C., Verlinden, O., & Dehombreux, P. (1994). Application of rigid body analysis for the choice of component modes in flexible multibody systems. Paper presented at 2nd European Solid Mechanics Conference, Genova, Italy.

Dehombreux, P., Verlinden, O., & Conti, C. (1994). On enforcing constraint equations in multibody systems dynamics. Paper presented at Euromech Colloquium on Multibody systems, Advanced algorithms and software tools, Prague, Czechia.

Verlinden, O., Dehombreux, P., & Boucher, S. (1994). Some considerations for the choice of components modes in flexible multibody systems. Paper presented at 3ème Congrès National Belge de Mécanique Théorique et Appliquée, Liège, Belgium.

Dehombreux, P., Conti, C., & Verlinden, O. (1994). Propagation de l'énergie vibratoire dans les structures. Comparaison de méthodes intensimétriques. Paper presented at 3ème Congrès National Belge de Mécanique Théorique et Appliquée, Liège, Belgium.

Verlinden, O., Dehombreux, P., & Conti, C. (1994). On the choice of component modes for flexible multibody systems from a rigid body analysis. Paper presented at Euromech Colloquium on Multibody systems, Advanced algorithms and software tools, Prague, Czechia.

Verlinden, O., Dehombreux, P., & Conti, C. (01 January 1994). A New Formulation ofr the Direct Dynamic Simulation of Flexible Mechanisms based on the Newton-Euler Inverse Method. International Journal for Numerical Methods in Engineering, 37, 3363-3387.
Peer Reviewed verified by ORBi

Wang, D., Conti, C., Dehombreux, P., & Verlinden, O. (1994). A computer-aided simulation approach for mechanisms with intermittent contact joints. Paper presented at 2nd International Conference on Computational Structure Technology, Athènes, Greece.

Dehombreux, P., Conti, C., Verlinden, O., & Datoussaïd, S. (1993). Analyse dynamique des systèmes multicorps contraints. Paper presented at 2ème Congrès Français de Mécanique, Lille - Villeneuve d'Ascq, France.

Datoussaïd, S., Verlinden, O., Conti, C., & Dehombreux, P. (1993). Méthodologie d'analyse dynamique latérale de véhicules ferroviaires urbains. Paper presented at International Symposium on Technological Innovation in guided transport, Lille, France.

Verlinden, O., Conti, C., & Dehombreux, P. (1993). Un critère objectif pour l'estimation de la qualité d'une base de modes composants en systèmes multicorps flexibles. Paper presented at Colloque national en calcul des structures, Giens, France.

Conti, C., Dehombreux, P., Verlinden, O., & Datoussaïd, S. (01 January 1993). ACIDYM, a modular software for computer-aided learning of kinematics and dynamics analysis of multibody system. Advanced Multibody System Dynamics : Simulation and Software Tools, 20, 361-366.
Peer reviewed

Conti, C., Dehombreux, P., & Verlinden, O. (1992). Exploitation de déformées opérationnelles en fonctionnement en dynamique des structures. Paper presented at Congrès StruCoMe, Paris, France.

Dehombreux, P., Conti, C., & Verlinden, O. (1992). Stabilization schemes for differential algebraic equations of multibody systems dynamics. Paper presented at Sixth International Conference on the Theory of Machines and Mechanisms, Liberec, Czechia.

Conti, C., Verlinden, O., & Dehombreux, P. (1992). A computer-aided kinematics analysis system based on relative coordinates for mechanisms with contact joints. Paper presented at Sixth International Conference on the Theory of Machines and Mechanisms, Liberec, Czechia.

Verlinden, O., Conti, C., Dehombreux, P., & Boucher, S. (1992). A new formulation for the direct dynamic simulation of flexible mechanism. Paper presented at 18th International Congress of Theoretical and Applied Mechanics, Haïfa, Israel.

Verlinden, O., Conti, C., & Dehombreux, P. (1991). Utilisation de la méthode inverse de Newton-Euler pour la simulation dynamique directe de mécanismes flexibles. Paper presented at StruCoMe, Paris, France.

Dehombreux, P., Conti, C., & Verlinden, O. (1991). Constraint violation problems in dynamic analysis of multibody systems. Paper presented at First European Solid Mechanics Conference, Munich, Germany.

Dehombreux, P., Conti, C., & Verlinden, O. (01 June 1991). A numerical Stabilization Algorithm based on the Introduction of a Constraint Violation Factor. European Journal of Mechanical Engineering, 36 (2), 99-104.
Peer reviewed

Dehombreux, P., Conti, C., & Verlinden, O. (1990). Optimisation de l'étape d'intégration numérique lors de la simulation dynamique directe d'un mécanisme par l'utilisation d'un indicateur de violation de contraintes. Paper presented at Congrès National de Mécanique Théorique et Appliquée, Bruxelles, Belgium.

Contact ORBi