in J. Davim Machining: Fundamentals and Recent Advances 2008 Springer
J.P. Davim Machining of Titanium Alloys 2014 Springer
in J.P. Davim Statistical and Computational Techniques in Manufacturing 2012 Springer
R. Sabre Plans d'expériences - Méthode de Tagushi Techniques de l'Ingénieur F 1 006 2007
NF E66-520-1 to 4, Working zones of cutting tools - couple tool-material for turning, 1997.
NF E66-520-5 and 6, Working zones of cutting tools - couple tool-material for milling, 1999.
NF E66-520-7 and 8, Working zones of cutting tools - couple tool-material for drilling, 2000.
in J.P. Davim FEM in Manufacturing Processes 2011 ISTE-Wiley
C. Maranhão, and J.P. Davim Finite element modelling of machining of AISI 316 steel: numerical simulation and experimental validation Simul. Modell. Pract. Theory 18 2010 139 156
M. Jackson, M. Whitfield, J. Morrell, and J.P. Davim Computational analysis of the intimate contact between an inclined wedge and low carbon steel during metal cutting Int. J. Mater. Prod. Technol. 37 2010 2 29
J.P. Davim, and C. Maranhão A study of plastic strain and plastic strain rate in machining of steel AISI 1045 using FEM analysis Mater. Des. 30 2009 160 165
P. Arrazola, A. Kortabarria, A. Madariaga, J. Esnaola, E. Fernandez, C. Cappellini, D. Ulutan, and T. Özel On the machining induced residual stresses in IN718 nickel-based alloy: experiments and predictions with finite element simulation Simul. Modell. Pract. Theory 41 2014 87 103
L. Filice, F. Micari, S. Rizzuti, and D. Umbrello Dependence of machining simulation effectiveness on material and friction modelling Mach. Sci. Technol.: Int. J. 12 2008 370 389
F. Ducobu, E. Rivière-Lorphèvre, and E. Filippi Numerical contribution to the comprehension of saw-toothed Ti6Al4V chip formation in orthogonal cutting Int. J. Mech. Sci. 81 2014 77 87
G.E. Moore Cramming more components onto integrated circuits Electronics 38 1965
M. Bäker The influence of plastic properties on chip formation Comput. Mater. Sci. 28 2003 556 562
J. Limido, C. Espinosa, M. Salaün, and J. Lacome SPH method applied to high speed cutting modelling Int. J. Mech. Sci. 49 2007 898 908
L. Olovsson, K. Simonsson, and M. Unosson Selective mass scaling for explicit finite element analyses Int. J. Numer. Methods Eng. 63 2005 1436 1445
A.M. Prior Application of implicit and explicit finite element techniques to metal forming J. Mater. Process. Technol. 45 1994 649 656
G. Cocchetti, M. Pagani, and U. Perego Selective mass scaling and critical time-step estimate for explicit dynamics analyses with solid-shell elements Comput. Struct. 2012
P. Wriggers Nonlinear Finite Element Methods 2008 Springer
S. Georgescu, P. Chow, and H. Okuda GPU acceleration for FEM-based structural analysis Arch. Comput. Methods Eng. 20 2013 111 121
S. Sun, M. Brandt, and M. Dargusch Characteristics of cutting forces and chip formation in machining of titanium alloys Int. J. Mach. Tools Manuf. 49 2009 561 568
T. Mabrouki, F. Girardin, M. Asad, and J.-F. Rigal Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351) Int. J. Mach. Tools Manuf. 48 2008 1187 1197
O. Pantalé, Plateforme de prototypage virtuel pour la simulation numérique en Grandes Transformations Thermomécaniques Rapides, Technical Report, Institut National Polytechnique de Toulouse, 2005.
M. Calamaz, D. Coupard, and F. Girot A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V Int. J. Mach. Tools Manuf. 48 2008 275 288
G. Johnson, W. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, in: Proceedings of the Seventh International Symposium on Ballistics, The Hague, The Netherlands, 1983, pp. 541-547
T. Özel, and E. Zeren Numerical modelling of meso-scale finish machining with finite edge radius tools Int. J. Mach. Mach. Mater. 2 2007 451 768
J. Sun, and Y.B. Guo Material flow stress and failure in multiscale machining titanium alloy Ti-6Al-4V Int. J. Adv. Manuf. Technol. 41 2009 651 659
D.R. Lesuer, Experimental Investigations of Material Models for Ti-6Al-4V Titanium and 2024-T3 Aluminum, Technical Report, Lawrence Livermore National Laboratory, 2000.
F. Ducobu, E. Rivière-Lorphèvre, and E. Filippi A Lagrangian FEM model to produce saw-toothed macro-chip and to study the depth of cut influence on its formation in orthogonal cutting of Ti6Al4V ARM 223 2011 3 11
S. Lampman Wrought titanium and titanium alloys Properties and Selection: Nonferrous Alloys and Special-Purpose Materials vol. 2 1990 ASM Handbook
M. Bäker, J. Rösler, and C. Siemers The influence of thermal conductivity on segmented chip formation Comput. Mater. Sci. 26 2003 175 182
M. Nasr, E.-G. Ng, and M. Elbestawi Effects of workpiece thermal properties on machining-induced residual stresses - thermal softening and conductivity Proc. IMechE B: JEM 221 2007 1387 1400
S. Koric, L. Hibbeler, and B. Thomas Explicit coupled thermo-mechanical finite element model of steel solidification Int. J. Numer. Methods Eng. 78 2009 1 31
K.-J. Bathe, and E. Wilson Numerical Methods in Finite Element Analysis 1976 Prentice-Hall
K. Hibbit, Sorenson, Abaqus Analysis User's Manual, Version 6.8, Dassault Systèmes, 2008.
M. Wang, H. Yang, Z. Sun, L. Guo, and X. Ou Dynamic explicit FE modeling of hot rolling process Trans. Nonferrous Met. Soc. China 16 2006 1274 1280
A. Powell, Finite Difference Solution of the Heat Equation, Technical Report, 2002.
L. Zybell, Finite Element Analysis of Ductile Fracture Behaviour of Pipe Sections with Surface Crack, Technical Report, NTNU, Trondheim, 2005.
L. Wang, and H. Long Investigation of material deformation in multi-pass conventional metal spinning Mater. Des. 32 2011 2891 2899
J. Wang, C. Huang, and W. Song The effect of tool flank wear on the orthogonal cutting process and its practical implications J. Mater. Process. Technol. 142 2003 338 346
G. Chryssolouris Manufacturing Systems: Theory and Practice 2006 Springer
C. Doukas, P. Stavropoulos, A. Papacharalampopoulos, P. Foteinopoulos, E. Vasiliadis, G. Chryssolouris, On the estimation of tool-wear for milling operations based on multisensorial data, in: (CIRP CMMO) Procedia CIRP, 14th CIRP Conference on Modelling of Machining Operations, Turin, Italy.
V. Schulze, J. Michna, F. Zanger, and R. Pabst Modeling the process-induced modifications of the microstructure of work piece surface zones in cutting processes Adv. Mater. Res. 223 2011 371 380
Y.-C. Yen, J. Söhner, B. Lilly, and T. Altan Estimation of tool wear in orthogonal cutting using the finite element analysis J. Mater. Process. Technol. 146 2004 82 91
L. Xie, J. Schmidt, C. Schmidt, and F. Biesinger 2D FEM estimate of tool wear in turning operation Wear 258 2005 1479 1490
L. Filice, F. Micari, L. Settineri, and D. Umbrello Wear modelling in mild steel orthogonal cutting when using uncoated carbide tools Wear 242 2007 545 554
A. Attanasio, E. Ceretti, S. Rizzuti, D. Umbrello, and F. Micari 3D finite element analysis of tool wear in machining CIRP Ann.-Manuf. Technol. 57 2008 61 64
A. Attanasio, and D. Umbrello Abrasive and diffusive tool wear FEM simulation Int. J. Mater. Form. 2 2009 543 546
