Gahleitner, G., Hydrogen from renewable electricity: An international review of power-to-gas pilot plants for stationary applications. Int J Hydrog Energy 38:5 (2013), 2039–2061.
De Paepe, W., Montero Carrero, M., Bram, S., Parente, A., Contino, F., Toward higher micro gas turbine efficiency and flexibility — humidified micro gas turbines: A review. J Eng Gas Turbines Power 140:8 (2018), 146–154.
Best, T., Finney, K.N., Ingham, D.B., Pourkashanian, M., Impact of CO2-enriched combustion air on micro-gas turbine performance for carbon capture. Energy 115 (2016), 1138–1147.
De Santis, A., Ingham, D.B., Ma, L., Pourkashanian, M., CFD analysis of exhaust gas recirculation in a micro gas turbine combustor for CO2 capture. Fuel 173 (2016), 146–154.
Lellek S, Sattelmayer T. Influence of Water Injection on Heat Release Distribution, Lean Blowout and Emissions of a Premixed Swirl Flame in a Tubular Combustor. In: ASME turbo expo 2015: GT2015-42602. 2015, p. V04AT04A046.
Parigi, D., Giglio, E., Soto, A., Santarelli, M., Power-to-fuels through carbon dioxide Re-Utilization and high-temperature electrolysis: A technical and economical comparison between synthetic methanol and methane. J Clean Prod 226 (2019), 679–691.
Laranci, P., Bursi, E., Fantozzi, F., Numerical analysis of a microturbine combustion chamber modified for biomass derived syngas. Proc ASME Turbo Expo 2:PARTS A AND B (2011), 541–548, 10.1115/GT2011-45551.
Liu, C.R., Shih, H.Y., A computational investigation of syngas substitution effects on the combustion characteristics for a micro gas turbine. Proc ASME Turbo Expo 5:x (2012), 693–702, 10.1115/GT2012-68950.
Boudier, G., Gicquel, L., Poinsot, T., Bissières, D., Bérat, C., Comparison of LES, RANS and experiments in an aeronautical gas turbine combustion chamber. Proc Combust Inst 31:2 (2007), 3075–3082.
Moureau, V., Domingo, P., Vervisch, L., From Large-Eddy Simulation to Direct Numerical Simulation of a lean premixed swirl flame: Filtered laminar flame-PDF modeling. Combust Flame 158:7 (2011), 1340–1357.
Poinsot, T., Veynante, D., Theoretical and numerical combustion. 3rd ed., 2001, Cambridge University Press.
Bénard, P., Lartigue, G., Moureau, V., Mercier, R., Large-Eddy Simulation of the lean-premixed PRECCINSTA burner with wall heat loss. Proc Combust Inst 37:4 (2019), 5233–5243.
Selle, L., Benoit, L., Poinsot, T., Nicoud, F., Krebs, W., Joint use of compressible large-eddy simulation and Helmholtz solvers for the analysis of rotating modes in an industrial swirled burner. Combust Flame 145:1 (2006), 194–205.
Roux, S., Lartigue, G., Poinsot, T., Meier, U., Bérat, C., Studies of mean and unsteady flow in a swirled combustor using experiments, acoustic analysis, and large eddy simulations. Combust Flame 141:1 (2005), 40–54.
Bénard, P., Balarac, G., Moureau, V., Dobrzynski, C., Lartigue, G., D'Angelo, Y., Mesh adaptation for large-eddy simulations in complex geometries. Internat J Numer Methods Fluids 81:12 (2016), 719–740.
Benard, P., Viré, A., Moureau, V., Lartigue, G., Beaudet, L., Deglaire, P., Bricteux, L., Large-Eddy Simulation of wind turbines wakes including geometrical effects. Comput & Fluids 173 (2018), 133–139.
Gargallo-Peiró, A., Avila, M., Owen, H., Prieto-Godino, L., Folch, A., Mesh generation, sizing and convergence for onshore and offshore wind farm Atmospheric Boundary Layer flow simulation with actuator discs. J Comput Phys 375 (2018), 209–227.
Odier, N., Thacker, A., Harnieh, M., Staffelbach, G., Gicquel, L., Duchaine, F., García Rosa, N., Müller, J.-D., A mesh adaptation strategy for complex wall-modeled turbomachinery LES. Comput & Fluids, 214, 2021, 104766.
Deiterding, R., Domingues, M.O., Schneider, K., Multiresolution analysis as a criterion for effective dynamic mesh adaptation – A case study for Euler equations in the SAMR framework AMROC. Comput & Fluids, 205, 2020, 104583.
Agostinelli, P.W., Rochette, B., Laera, D., Dombard, J., Cuenot, B., Gicquel, L., Static mesh adaptation for reliable large eddy simulation of turbulent reacting flows. Phys Fluids, 33(3), 2021, 035141, 10.1063/5.0040719.
Haldenwang, P., Pignol, D., Dynamically adapted mesh refinement for combustion front tracking. Comput & Fluids 31:4 (2002), 589–606.
Rochette, B., Riber, E., Cuenot, B., Vermorel, O., A generic and self-adapting method for flame detection and thickening in the thickened flame model. Combust Flame 212 (2020), 448–458.
Moureau, V., Domingo, P., Vervisch, L., Design of a massively parallel CFD code for complex geometries. C R Mec 339:2-3 (2011), 141–148.
Kraushaar, M., Application of the compressible and low-mach number approaches to large-eddy simulation of turbulent flows inaero-engines. (Ph.D. thesis), 2011, CERFACS.
Bénard, P., Moureau, V., Latrigue, G., D'Angelo, Y., Large-Eddy Simulation of a hydrogen enriched methane/air meso-scale combustor. Int J Hydrog Energy 42:4 (2011), 2397–2410.
Boulet, L., Bénard, P., Lartigue, G., Moureau, V., Didorally, S., Chauvet, N., Duchaine, F., Modeling of conjugate heat transfer in a kerosene/air spray flame used for aeronautical fire resistance tests. Flow Turbul Combust 101:2 (2018), 579–602.
Colin, O., Ducros, F., Veynante, D., Poinsot, T., A thickened flame model for large eddy simulations of turbulent premixed combustion. Phys Fluids 12:7 (2000), 1843–1863.
Charlette, F., Meneveau, C., Veynante, D., A power-law flame wrinkling model for LES of premixed turbulent combustion Part II: dynamic formulation. Combust Flame 131:1 (2002), 181–197.
Pappa, A., Cordier, M., Bénard, P., Bricteux, L., De Paepe, W., How do water and CO2 impact the stability and emissions of the combustion in a micro gas turbine? — A Large Eddy Simulations comparison. Energy, 248, 2022, 123446.
Pappa, A., Bricteux, B., Bénard, P., De Paepe, W., Can water dilution avoid flashback on a hydrogen enriched micro gas turbine combustion? — a large eddy simulations study. J Eng Gas Turbine Power, 143, 2020, 041008.
Pappa A, Nicolosi F, Verhaeghe A, Bricteux B, Renzi M, De Paepe W. Performance and emission assessment on a 3kW micro Gas Turbine: comparison of RANS and LES predictions. In: ASME turbo expo 2021: GT2021-59618. 2021.
Turbec, A., T100 microturbine CHP system: Technical description version 4.0. 2010.
Durox, D., Moeck, J.P., Bourgouin, J.-F., Morenton, P., Viallon, M., Schuller, T., Candel, S., Flame dynamics of a variable swirl number system and instability control. Combust Flame 160:9 (2013), 1729–1742.
Balakrishnan, P., Srinivasan, K., Influence of swirl number on jet noise reduction using flat vane swirlers. Aerosp Sci Technol 73 (2018), 256–268.
De Paepe, W., Delattin, F., Bram, S., De Ruyck, J., Steam injection experiments in a microturbine - A thermodynamic performance analysis. Appl Energy 97 (2012), 569–576.
De Paepe W, Montero Carrero M, Giorgetti S, Parente A, Bram S, Contino F. Exhaust Gas Recirculation on Humidified Flexible Micro Gas Turbines for Carbon Capture Applications. In: ASME turbo expo 2016: GT2016-57265. 2016, p. V003T06A011.
Zornek, T., Monz, T., Aigner, M., Performance analysis of the micro gas turbine Turbec T100 with a new FLOX-combustion system for low calorific fuels. Appl Energy 159 (2015), 276–284.
Schwarzle A, Monz TO, Aigner M. Detailed Examination of Two-Staged Micro Gas Turbine Combustor. In: ASME turbo expo 2016: GT2016-57730. 2016, p. V04BT04A039.
Germano, M., Piomelli, U., Moin, P., Cabot, W., A dynamic subgrid-scale eddy viscosity model. Phys Fluids 3:7 (1991), 1760–1765.
Pope, S.B., Turbulent flows. 3rd ed., 2000, Cambridge University Press.
Montero Carrero, M., De Paepe, W., Magnusson, J., Parente, A., Bram, S., Contino, F., Experimental characterisation of a micro Humid Air Turbine: assessment of the thermodynamic performance. Appl Therm Eng 118 (2017), 796–806.
Hunt J, Wray A, Moin P. Eddies, streams, and convergence zones in turbulent flows. In: Studying turbulence using numerical simulation databases. Vol. -1, 1988, p. 193–208.
Legrand, N., Lartigue, G., Moureau, V., A multi-grid framework for the extraction of large-scale vortices in Large-Eddy Simulation. J Comput Phys 349 (2017), 528–560, 10.1016/j.jcp.2017.08.030 URL https://www.sciencedirect.com/science/article/pii/S0021999117306010.
Goodwin, D., Cantera: object-oriented software for reacting flows. 2005, California Institute for Technologyn (Caltech).
Centre des Equipements de Calcul Intensif (CECI). [Consulted on 30/04/2020]. [link]. URL http://www.ceci-hpc.be/clusters.html.