Tool wear for finishing milling of green thermoplastic-ceramic composites fabricated with pellet AM

[en] The wear of milling tools used for finishing green ceramics shaped by pellet additive manufacturing can be challenging. This article aims to evaluate the tool life of a tool, initially dedicated to thermoplastics, when used for milling green zirconia and seeks to confirm the influence of the build direction on the cutting forces. The tool can withstand 30 minutes of milling without reaching the tool life criteria of ISO 8688. The generated surfaces exhibited a shiny finish, no material pull out and a Ra < 1.6 µm. The cutting forces were low with maximal values of 15 N.

Disciplines :

Mechanical engineering

Author, co-author :

Spitaels, Laurent ; Université de Mons - UMONS > Faculté Polytechniqu > Service de Génie Mécanique

Naiara Aldeiturriaga Olabarri

Bossu, Julien ; Université de Mons - UMONS > Faculté Polytechniqu > Service de Métallurgie

Martic, Gregory

Juste, Enrique

Arrazola, Pedro-José

Rivière, Edouard ; Université de Mons - UMONS > Faculté Polytechnique > Service de Génie Mécanique

Ducobu, François ; Université de Mons - UMONS > Faculté Polytechnique > Service de Génie Mécanique

Language :

English

Title :

Tool wear for finishing milling of green thermoplastic-ceramic composites fabricated with pellet AM

Publication date :

2024

Journal title :

Procedia CIRP

ISSN :

2212-8271

Publisher :

Elsevier BV

Volume :

121

Pages :

97-102

Peer reviewed :

Peer Reviewed verified by ORBi

Additional URL :

https://api.elsevier.com/content/article/PII:S2212827123009769?httpAccept=text/xml

Research unit :

F707 - Génie Mécanique

Research institute :

R400 - Institut de Recherche en Science et Ingénierie des Matériaux

Funders :

Walloon Government

Funding number :

2110084

Funding text :

HyProPAM research project

Available on ORBi UMONS :

since 05 February 2024

Statistics

Number of views

8 (1 by UMONS)

Number of downloads

27 (5 by UMONS)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

OpenAlex citations

Bibliography

Galusek, D., Ghillányová, K., 2014. Ceramic Oxides, in “Ceramics Science and Technology”. In: Riedel, R., Chen, I.W. (Eds.). Wiley-VCH Verlag GmbH & Co., pp. 1–58.
Altiparmak, S.C., Yardley, V.A., Shi, Z., Lin, J., 2022. Extrusion-based additive manufacturing technologies: State of the art and future perspectives. J. Manuf. Process. 83, pp. 607–636.
Ferraris, E., Vleugels, J., Guo, Y., Bourell, D., Kruth, J.P., Lauwers, B., 2016. Shaping of engineering ceramics by electro, chemical and physical processes. CIRP Ann.-Manuf. Technol. 65, pp. 761–784.
Ferrage, L., Bertrand, G., Lenormand, P., Grossin, D., Ben-Nissan, B., 2017. A review of the additive manufacturing (3DP) of bioceramics: Alumina, zirconia (PSZ) and hydroxyapatite. J. Aust. Ceram. Soc. 53, pp. 11–20.
Bourell, D., Kruth, J.P., Leu, M., Levy, G., Rosen, D., Beese, A.M., Clare, A., 2017. Materials for additive manufacturing. CIRP Ann. 66, pp. 659–681.
Smartech Analysis, 2018. Ceramics Additive Manufacturing Markets 2017–2028, an Opportunity Analysis and Ten-Year Market Forecast.
Rane, K., Strano, M., 2019. A comprehensive review of extrusion-based additive manufacturing processes for rapid production of metallic and ceramic parts. Adv. Manuf. 7, pp. 155–173.
Turner, B.N., Gold, S.A., 2015.A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness. Rapid Prototyp. J. 2015, 21, pp. 250–261.
Demarbaix, A., Mulliez, M., Rivière-Lorphèvre, E., Spitaels, L., Duterte, C., Preux, N., Petit, F., Ducobu, F., 2021. Green Ceramic Machining: Determination of the Recommended Feed Rate for Y-TZP Milling. J. Compos. Sci. 5, 231.
Parenti, P., Cataldo, S., Grigis, A., Covelli, M., Annoni,M., 2019. Implementation of hybrid additive manufacturing based on extrusion of feedstock and milling. Procedia Manuf. 2019, 34, pp. 738–746.
Flynn, J.M., Shokrani, A., Newman, S.T., Dhokia, V., 2016. Hybrid additive and subtractive machine tools – Research and industrial developments. Int. J. Mach. Tools Manuf. 2016, 101, pp. 79–101.
Spitaels, L., Dantinne, H., Bossu, J., Rivière-Lorphèvre, E., Ducobu, F., 2023. A Systematic Approach to Determine the Cutting Parameters of AM Green Zirconia in Finish Milling. J. Compos. Sci. 7, 112.
Spitaels, L., Rivière-Lorphèvre, E., Martic, G., Juste, E., Ducobu, F., 2023. Machining of PAM green Y-TZP: Influence of build and in-plane directions on cutting forces and surface topography. Mat. Res. Proc. 28 pp. 1245–1253.