[en] Due to the intrinsic porosity of the layers formed by the plasma electrolytic oxidation (PEO) process, the application of silane-based coatings as an eco-friendly layer is a promising way to diminish penetration of the corrosive species into the PEO coating by pores sealing. In this study, to enhance the corrosion protection of AA2024, the performance of the duplex system achieved by adding different concentrations in sodium montmorillonite (Na-MMT) dispersed into the silane coating was assessed. In this study, a hybrid sol-gel layer (30% V/V) obtained from tetraethoxysilane (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTMS) sol-gel solution was applied on AA2024 previously covered by an optimized PEO layer using a solution containing sodium silicate and potassium hydroxide solution as electrolyte. Electrochemical impedance spectroscopy (EIS) revealed the significant impact of the sol-gel/clay nanocomposite layer on the corrosion protection performance of the PEO layer on the AA2024 substrate in a 0.1 M NaCl solution. Regarding, the low-frequency impedance of different coating systems upon five weeks exposure to the aggressive solution reported the sealing ability of the sol-gel coatings in which the silane coating modified with 1000 ppm of clay nanoparticles had the maximum corrosion resistance among them (i.e., higher than 107 after 5 weeks immersion). The flake-like structure of sodium montmorillonite not only enhanced the barrier performance, but also FT-IR outcomes reflected the reticulation of the silane network through the interaction of nanoparticles with SiOH groups of the silane layer.
Research center :
CRIM - Ingénierie des matériaux
Disciplines :
Materials science & engineering
Author, co-author :
Akbarzadeh, Sajjad ; Université de Mons - UMONS > Faculté Polytechnique > Service de Science des Matériaux
Sopchenski, Luciane; UMONS - Université de Mons [BE]
Vitry, Véronique ; Université de Mons - UMONS > Faculté Polytechnique > Service de Métallurgie
Paint, Yoann; Materia Nova
Olivier, Marie-Georges ; Université de Mons - UMONS > Faculté Polytechnique > Service de Science des Matériaux
Language :
English
Title :
Improvement of the corrosion performance of AA2024 alloy by a duplex PEO/clay modified sol-gel nanocomposite coating
R400 - Institut de Recherche en Science et Ingénierie des Matériaux
Funding text :
The authors would like to thank UMONS ( University of Mons ) for the financial support in the framework of the ARC SEALCERA project.The Materials Science and Metallurgy Departments received a financial funding from UMONS in the framework of the 2018 ARC call. The project SEALCERA was selected for funding (2019–2024). The PhD student, Sajjad Akbarzadeh, received a PhD grant in the field of this project.
Murer, N., Oltra, R., Vuillemin, B., Néel, O., Numerical modelling of the galvanic coupling in aluminium alloys: a discussion on the application of local probe techniques. Corros. Sci. 52 (2010), 130–139.
Buchheit, R.G., Grant, R.P., Hlava, P.F., Mckenzie, B., Zender, G.L., Local dissolution phenomena associated with S phase (Al2CuMg) particles in aluminum alloy 2024–T3. J. Electrochem. Soc., 144, 1997, 2621.
Warner, T., Schmidt, M., Sommer, F., Bellot, D., Characterisation of corrosion initiation on 2024 aluminium alloy by atomic force microscopy. Int. J. Mater. Res. 86 (1995), 494–502.
Dimitrov, N., Mann, J.A., Vukmirovic, M., Sieradzki, K., Dealloying of Al2CuMg in alkaline media. J. Electrochem. Soc., 147, 2000, 3283.
Yerokhin, A.L., Nie, X., Leyland, A., Matthews, A., Dowey, S.J., Plasma electrolysis for surface engineering. Surf. Coat.Technol. 122 (1999), 73–93.
Mashtalyar, D.V., Nadaraia, K.V., Gnedenkov, A.S., Imshinetskiy, I.M., Piatkova, M.A., Pleshkova, A.I., Belov, E.A., Filonina, V.S., Suchkov, S.N., Sinebryukhov, S.L., Gnedenkov, S.V., Bioactive coatings formed on titanium by plasma electrolytic oxidation: composition and properties. Materials (Basel), 13, 2020, 4121.
Molaeipour, P., Allahkaram, S.R., Akbarzadeh, S., Corrosion inhibition of Ti6Al4V alloy by a protective plasma electrolytic oxidation coating modified with boron carbide nanoparticles. Surf. Coat.Technol., 430, 2022, 127987.
Stojadinović, S., Vasilić, R., Perić, M., Investigation of plasma electrolytic oxidation on valve metals by means of molecular spectroscopy – a review. RSC Adv. 4 (2014), 25759–25789.
Wang, L., Chen, L., Yan, Z., Fu, W., Optical emission spectroscopy studies of discharge mechanism and plasma characteristics during plasma electrolytic oxidation of magnesium in different electrolytes. Surf. Coat.Technol. 205 (2010), 1651–1658.
Snizhko, L.O., Yerokhin, A.L., Pilkington, A., Gurevina, N.L., Misnyankin, D.O., Leyland, A., Matthews, A., Anodic processes in plasma electrolytic oxidation of aluminium in alkaline solutions. Electrochim. Acta 49 (2004), 2085–2095.
Yerokhin, A.L., Snizhko, L.O., Gurevina, N.L., Leyland, A., Pilkington, A., Matthews, A., Spatial characteristics of discharge phenomena in plasma electrolytic oxidation of aluminium alloy. Surf. Coat.Technol. 177–178 (2004), 779–783.
Tian, J., Luo, Z., Qi, S., Sun, X., Structure and antiwear behavior of micro-arc oxidized coatings on aluminum alloy. Surf. Coat.Technol. 154 (2002), 1–7.
Xue, W., Deng, Z., Chen, R., Zhang, T., Growth regularity of ceramic coatings formed by microarc oxidation on Al–Cu–Mg alloy. Thin Solid Films 372 (2000), 114–117.
Xue, W., Deng, Z., Lai, Y., Chen, R., Analysis of phase distribution for ceramic coatings formed by microarc oxidation on aluminum alloy. J. Am. Ceram. Soc. 81 (1998), 1365–1368.
Nie, X., Leyland, A., Song, H.W., Yerokhin, A.L., Dowey, S.J., Matthews, A., Thickness effects on the mechanical properties of micro-arc discharge oxide coatings on aluminium alloys. Surf. Coat.Technol. 116–119 (1999), 1055–1060.
Shrestha, S., Dunn, B.D., Plasma electrolytic oxidation and anodising of aluminium alloys for spacecraft applications. Surf. Eng. Light Alloy. Alum. Magnes. Titan. Alloy, 2010, 603–641.
Mécuson, F., Czerwiec, T., Belmonte, T., Dujardin, L., Viola, A., Henrion, G., Diagnostics of an electrolytic microarc process for aluminium alloy oxidation. Surf. Coat.Technol. 200 (2005), 804–808.
Liang, J., Guo, B., Tian, J., Liu, H., Zhou, J., Liu, W., Xu, T., Effects of NaAlO2 on structure and corrosion resistance of microarc oxidation coatings formed on AM60B magnesium alloy in phosphate–KOH electrolyte. Surf. Coat.Technol. 199 (2005), 121–126.
Timoshenko, A.V., Magurova, Y.V., Investigation of plasma electrolytic oxidation processes of magnesium alloy MA2-1 under pulse polarisation modes. Surf. Coat.Technol. 199 (2005), 135–140.
Yerokhin, A.L., Shatrov, A., Samsonov, V., Shashkov, P., Pilkington, A., Leyland, A., Matthews, A., Oxide ceramic coatings on aluminium alloys produced by a pulsed bipolar plasma electrolytic oxidation process. Surf. Coat.Technol. 199 (2005), 150–157.
Curran, J.A., Clyne, T.W., Thermo-physical properties of plasma electrolytic oxide coatings on aluminium. Surf. Coat.Technol. 199 (2005), 168–176.
Wei, T., Yan, F., Tian, J., Characterization and wear- and corrosion-resistance of microarc oxidation ceramic coatings on aluminum alloy. J. Alloys Compd. 389 (2005), 169–176.
Mohedano, M., Lu, X., Matykina, E., Blawert, C., Arrabal, R., Zheludkevich, M.L., Plasma electrolytic oxidation (PEO) of metals and alloys. Encycl. Interfacial Chem. Surf. Sci. Electrochem, 2018, 423–438.
Zhu, M.H., Cai, Z.B., Lin, X.Z., Ren, P.D., Tan, J., Zhou, Z.R., Fretting wear behaviour of ceramic coating prepared by micro-arc oxidation on Al–Si alloy. Wear 263 (2007), 472–480.
Nie, X., Meletis, E.I., Jiang, J.C., Leyland, A., Yerokhin, A.L., Matthews, A., Abrasive wear/corrosion properties and TEM analysis of Al2O3 coatings fabricated using plasma electrolysis. Surf. Coat.Technol. 149 (2002), 245–251.
Treviño, M., Mercado-Solis, R.D., Colás, R., Pérez, A., Talamantes, J., Velasco, A., Erosive wear of plasma electrolytic oxidation layers on aluminium alloy 6061. Wear 301 (2013), 434–441.
Pezzato, L., Brunelli, K., Babbolin, R., Dolcet, P., Dabalà, M., Sealing of PEO coated AZ91 magnesium alloy using la-based solutions. Int. J. Corros., 2017, 2017.
Mingo, B., Arrabal, R., Mohedano, M., Llamazares, Y., Matykina, E., Yerokhin, A., Pardo, A., Influence of sealing post-treatments on the corrosion resistance of PEO coated AZ91 magnesium alloy. Appl. Surf. Sci. 433 (2018), 653–667.
Pezzato, L., Babbolin, R., Cerchier, P., Marigo, M., Dolcet, P., Dabalà, M., Brunelli, K., Sealing of PEO coated AZ91magnesium alloy using solutions containing neodymium. Corros. Sci., 173, 2020, 108741.
Joo, J., Kim, D., Moon, H.S., Kim, K., Lee, J., Durable anti-corrosive oil-impregnated porous surface of magnesium alloy by plasma electrolytic oxidation with hydrothermal treatment. Appl. Surf. Sci., 509, 2020, 145361.
Mashtalyar, D.V., Nadaraia, K.V., Imshinetskiy, I.M., Belov, E.A., Filonina, V.S., Suchkov, S.N., Sinebryukhov, S.L., Gnedenkov, S.V., Composite coatings formed on Ti by PEO and fluoropolymer treatment. Appl. Surf. Sci., 536, 2021, 147976.
Orouji, S.M., Naderi, R., Mahdavian, M., Fabrication of protective silane coating on mild steel: the role of hydrogen peroxide in acid treatment solution. J. Ind. Eng. Chem. 64 (2018), 245–255.
Li, T., Li, L., Qi, J., Chen, F., Corrosion protection of Ti6Al4V by a composite coating with a plasma electrolytic oxidation layer and sol-gel layer filled with graphene oxide. Prog. Org. Coat., 144, 2020, 105632.
Toorani, M., Aliofkhazraei, M., Review of electrochemical properties of hybrid coating systems on mg with plasma electrolytic oxidation process as pretreatment. Surf.Interfaces 14 (2019), 262–295.
Li, Z., Jing, X., Yuan, Y., Zhang, M., Composite coatings on a Mg–Li alloy prepared by combined plasma electrolytic oxidation and sol–gel techniques. Corros. Sci. 63 (2012), 358–366.
Sopchenski, L., Robert, J., Touzin, M., Tricoteaux, A., Olivier, M.G., Improvement of wear and corrosion protection of PEO on AA2024 via sol-gel sealing. Surf. Coat.Technol., 417, 2021, 127195.
Toorani, M., Aliofkhazraei, M., Mahdavian, M., Naderi, R., Effective PEO/silane pretreatment of epoxy coating applied on AZ31B Mg alloy for corrosion protection. Corros. Sci., 169, 2020, 108608.
Akbarzadeh, S., Ramezanzadeh, M., Ramezanzadeh, B., Mahdavian, M., Naderi, R., Fabrication of highly effective polyaniline grafted carbon nanotubes to induce active protective functioning in a silane coating. Ind. Eng. Chem. Res. 58 (2019), 20309–20322.
Akbarzadeh, S., Naderi, R., Mahdavian, M., Fabrication of a highly protective silane composite coating with limited water uptake utilizing functionalized carbon nano-tubes. Compos. Part B Eng., 175, 2019, 107109.
Thai, T.T., Trinh, A.T., Olivier, M.G., Hybrid sol–gel coatings doped with cerium nanocontainers for active corrosion protection of AA2024. Prog. Org. Coat., 138, 2020, 105428.
Suarez-Martinez, P.C., Robinson, J., An, H., Nahas, R.C., Cinoman, D., Lutkenhaus, J.L., Polymer-clay nanocomposite coatings as efficient, environment-friendly surface pretreatments for aluminum alloy 2024–T3. Electrochim. Acta 260 (2018), 73–81.
Truc, T.A., Thuy, T.T., Oanh, V.K., Hang, T.T.X., Nguyen, A.S., Caussé, N., Pébère, N., 8-Hydroxyquinoline-modified clay incorporated in an epoxy coating for the corrosion protection of carbon steel. Surf.Interfaces 14 (2019), 26–33.
Deflorian, F., Rossi, S., Fedel, M., Motte, C., Electrochemical investigation of high-performance silane sol–gel films containing clay nanoparticles. Prog. Org. Coat. 69 (2010), 158–166.
Pavlidou, S., Papaspyrides, C.D., A review on polymer–layered silicate nanocomposites. Prog. Polym. Sci. 33 (2008), 1119–1198.
Warner, T., Schmidt, M., Sommer, F., Bellot, D., Corrosion protection of carbon steel by an epoxy resin containing organically modified clay. Surf. Coat. Technol. 201 (2007), 7408–7415.
Truc, Trinh Anh, Hang, To Thi Xuan, Oanh, Vu Ke, Dantras, E., Lacabanne, C., Oquab, D., Pébère, N., Incorporation of an indole-3 butyric acid modified clay in epoxy resin for corrosion protection of carbon steel. Surf. Coat.Technol. 202 (2008), 4945–4951.
Milošev, I., Kapun, B., Rodič, P., Iskra, J., Hybrid sol–gel coating agents based on zirconium(IV) propoxide and epoxysilane. J. Sol-Gel Sci. Technol. 742:74 (2015), 447–459 2015.
Costenaro, H., Lanzutti, A., Paint, Y., Fedrizzi, L., Terada, M., de Melo, H.G., Olivier, M.G., Corrosion resistance of 2524 Al alloy anodized in tartaric-sulphuric acid at different voltages and protected with a TEOS-GPTMS hybrid sol-gel coating. Surf. Coat.Technol. 324 (2017), 438–450.
Asadi, N., Naderi, R., Saremi, M., Determination of optimum concentration of cloisite in an eco-friendly silane sol-gel film to improve corrosion resistance of mild steel. Appl. Clay Sci. 95 (2014), 243–251.
Farmer, V.C., Russell, J.D., The infra-red spectra of layer silicates. Spectrochim. Acta 20 (1964), 1149–1173.
Yan, Laibin, Roth, Charles B., Low, P.F., Changes in the Si−O vibrations of smectite layers accompanying the sorption of interlayer water. Langmuir 12 (1996), 4421–4429.
Karakassides, M.A., Gournis, D., Petridis, D., An infrared reflectance study of Si–O vibrations in thermally treated alkali-saturated montmorillonites. Clay Miner. 34 (1999), 429–438.
Sinha Ray, S., Okamoto, M., Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog. Polym. Sci. 28 (2003), 1539–1641.
Chorom, M., Rengasamy, P., Dispersion and zeta potential of pure clays as related to net particle charge under varying pH, electrolyte concentration and cation type. Eur. J. Soil Sci. 46 (1995), 657–665.
Xu, J., Yu, Q., Liu, J., Yin, Y., Han, Y., Li, B., Preparation and characterization of polyfluoroaniline/organosiloxane hybrid films. J. Sol-Gel Sci. Technol. 693:69 (2013), 580–585 2013.
Molaeipour, P., Ramezanzadeh, M., Ramezanzadeh, B., Stachys byzantina extract: a green biocompatible molecules source for graphene skeletons generation on the carbon steel for superior corrosion mitigation. Bioelectrochemistry, 143, 2022, 107970.
Ramezanzadeh, B., Haeri, Z., Ramezanzadeh, M., A facile route of making silica nanoparticles-covered graphene oxide nanohybrids (SiO2-GO); fabrication of SiO2-GO/epoxy composite coating with superior barrier and corrosion protection performance. Chem. Eng. J. 303 (2016), 511–528.
Nibou, D., Amokrane, S., Mekatel, H., Lebaili, N., Elaboration and characterization of solid materials of types zeolite NaA and faujasite NaY exchanged by zinc metallic ions Zn2+. Phys. Procedia 2 (2009), 1433–1440.
Fedel, M., Callone, E., Diré, S., Deflorian, F., Olivier, M.G., Poelman, M., Effect of na-montmorillonite sonication on the protective properties of hybrid silica coatings. Electrochim. Acta 124 (2014), 90–99.
Tagliazucca, V., Callone, E., Dirè, S., Influence of synthesis conditions on the cross-link architecture of silsesquioxanes prepared by in situ water production route. J. Sol-Gel Sci. Technol. 603:60 (2011), 236–245 2011.
Nguyen, V.N., Perrin, F.X., Vernet, J.L., Water permeability of organic/inorganic hybrid coatings prepared by sol–gel method: a comparison between gravimetric and capacitance measurements and evaluation of non-Fickian sorption models. Corros. Sci. 47 (2005), 397–412.
Olivier, M.G., Fedel, M., Sciamanna, V., Vandermiers, C., Motte, C., Poelman, M., Deflorian, F., Study of the effect of nanoclay incorporation on the rheological properties and corrosion protection by a silane layer. Prog. Org. Coat. 72 (2011), 15–20.
Amand, S., Musiani, M., Orazem, M.E., Pébère, N., Tribollet, B., Vivier, V., Constant-phase-element behavior caused by inhomogeneous water uptake in anti-corrosion coatings. Electrochim. Acta 87 (2013), 693–700.
Alexander, C.L., Tribollet, B., Orazem, M.E., Contribution of surface distributions to constant-phase-element (CPE) behavior: 1. Influence of roughness. Electrochim. Acta 173 (2015), 416–424.
Tan, Jianhong, Guo, Lei, Yang, Hong, Zhang, Fan, Bakri, Y.El, Synergistic effect of potassium iodide and sodium dodecyl sulfonate on the corrosion inhibition of carbon steel in HCl medium: a combined experimental and theoretical investigation. RSC Adv. 10 (2020), 15163–15170.
Akbarzadeh, S., Ramezanzadeh, M., Ramezanzadeh, B., Bahlakeh, G., A green assisted route for the fabrication of a high-efficiency self-healing anti-corrosion coating through graphene oxide nanoplatform reduction by Tamarindus indiaca extract. J. Hazard. Mater., 390, 2020, 122147.